Used Panhans 426 for sale (84)

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: 163, planing width: 420 mm, total length: 2,500 mm, total height: 1,200 mm, total width: 1,400 mm, table length: 2,500 mm, surfacing fence length: 180 mm, surfacing fence height: 1,110 mm, chip removal for surfacing (max.): 12 mm, number of planer blades: 2, number of blades: 4, type of input current: three-phase, The machine was externally inspected in 2007 prior to acquisition and no defects were found. Since then, it has been used in a bow workshop (archery) with very low usage compared to industrial application. Replacement knife included. The chip removal display is not functional. Otherwise, there are no further known defects. Njdpfx Adjwyk Rgs Njkt A forklift is available on site to assist with loading. Dismantling, loading, and transport must be organized and paid for by the buyer. The machine will remain in operation until 18.07. and will be located in Plankstadt near Heidelberg until then. Afterwards, it will be located in 31863 Bisperode (Hameln-Pyrmont). If purchase is completed before 17.07., collection from Plankstadt is possible until 15.08. if required.

Condition: used, Year of construction: 1986, From a model shop Used, excellent condition, little used Nodpswhqw Nofx Ad Njkt Make: Panhans Type 325 Year of manufacture: 1986 GS-tested Motor: 4.0 kW Top control panel Planing width: approx. 510 mm Infeed table length: approx. 1600 mm Removal table length: approx. 1150 mm Auxiliary stop Slotted/low-noise table lips Number of knives: 4 Blade system: Strip planer knives Chip thickness indicator Hollow-pointed joint Automatic brake Hollow-pointed joint adjustment Extraction connection: 140 mm diameter Space required: approx. 2800 mm x 800 mm x 1200 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, milling spindle length: 150 mm, power: 11 kW (14.96 HP), spindle diameter: 40 mm, overall weight: 1,500 kg, Double-sided swivel unit bearings with two sturdy segment guides, modern steel construction column, heavy-walled, heavily ribbed cast iron table, replaceable milling arbor, three-phase motor with 4 speeds, electric height and tilt adjustment in rapid and creep speed, and electronic digital display, incremental dimension switching for height adjustment, milling stop with fine adjustment and metal stop jaws and replaceable aluminum splinter guards, extraction nozzles on the milling stop and below the table, each 120 mm in diameter, minimum extraction speed at the extraction nozzle: 20 m/s, rotating table insert, locked reversing switch for left and right rotation, lockable main switch, cam switch, automatic motor brake Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW MK 5 milling arbor mount Speeds 3000/4500/6000/9000 rpm Mill arbor swivel range: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, including extendable frame support Stepless 4-roller feed 2-axis control Mill arbor with 40 mm diameter and 150 mm length Nodpfx Adewcpqqe Nokt

Condition: like new (used), Year of construction: 2024, *demonstration machine available at short notice TECHNICAL DATA planing width 630 mm planing height 3 - 300 mm chip removal max. 8 mm thicknessing table length 1100 mm blade shaft speed 5000 rpm motor power feed 0,55 kW / 0,8 PS / 0,75 kW / 1,0 PS suction nozzle Ø 160 mm left, right usable feed speed 7 + 14 m/min Color RAL 7035 light gray and RAL 5000 violet blue Nkjdpfxjfgwqaj Ad Not Net weight approx. 1050 kg TECHNICAL DESCRIPTION Solid German engineering For thickness planing for planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions Planed in the factory PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives Pendulum mounted feed rollers Segmented rubber infeed and outfeed rollers Ø 90 mm ensure smooth and safe workpiece infeed With link pressure beam Electrical height adjustment of the thicknessing table, tilt-proof on 4 trapezoidal thread spindles With finely planed thicknessing table Positioning control 4,3" touch screen Two feed speeds: 7 + 14 m/min Automatic star-delta start-up Mechanical motor brake Suction nozzle Ø 160 mm, can be used on the left or right side CE conform GS tested

Condition: used, Year of construction: 1989, with positioning control and Tersa cutterblockcleaned, function tested, test run- machine lubricated- test run- infeed rollers renewed- outfeed rollers renewed- rubber lip front and rear renewed- test planingspare parts:Panhans feed rollers, overhauled controlused, good conditionmake Panhanstype 435year of construction 1989Masch.-Nr. 170GS-testedmotor 5,5 kW / 0,25 kWplaning width approx. 510 mmplaning height approx. 250 mmlink pressure beamrubber infeed rollerrubber outfeed rollerfeed 7/14 m/ber of knives 4 piecesknife systemTersa reversible kniveselectric height adjustmentautomatic positioning controlsound insulationexhaust connection D 160 mmspace requirement approx. 1100 mm x 1200 mm x 1200 mmweight approx. 950 kgtotal connected load approx. 5,75 kWstorage location 97447 Gerolzhofen, free on truck, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Nedpsvwfbiefx Ad Nekt

Condition: reconditioned (used), Year of construction: 1997, Connected load 380V 11kW 30A electric swivel -5° to +45 electric height adjustment digital display clockwise/anticlockwise rotation speeds 3000/4500/6000/9000 rpm Milling fence with siko counter Spindle diameter 30 mm Table size 1350 x 800 mm Nksdsub S U Sjpfx Ad Net Control panel on top Extraction connection 2x120 mm

Condition: good (used), Year of construction: 2007, Surface planer Model Panhans PA 51 Nsdpfswkf Hkjx Ad Nskt Year of manufacture 2007 Planing width 510 mm Cutter block with 4 strip knives Feed table length 1180 mm Discharge table length 1180 mm Motor 4.0 kW / 400 V

Condition: new, Year of construction: 2024, Technical data - Plane width: 510 mm - Feed table length 1620 mm - Output table length 1170 mm - Total table length 2850 mm - Engine power 5,5 kW /7,5 PS - knife shaft speed 5000 rpm - Suction connection 160 mm - Voltage 400 V / 50 Hz - Space requirement 2850 x 1420 mm - Colour light grey / purple blue - Weight: approx. 1050 kg Description - Solid German mechanical engineering - for dressing and jointing including hollow and pointed joint adjustment for planer width up to 510 mm and max. chip removal up to 8 mm Nkodjfg Uzbspfx Ad Not - ergonomic working position directly on the cutter head - Solid steel spiral knife shaft - Cleaning set for spiral knife shaft - finely planed cast iron tables, total table length 2850 mm - Control panel on top at eye level with digital display of chip removal, the current delivery table situation (neutral, hollow and pointed joint), including - Document holder and practical tool tray - electromotive adjustment of the feed table via push buttons - Hollow and pointed joint adjustment at the delivery table - serrated table lips for noise reduction - Dressing fence Adjustment of depth and inclination via 1 lever operation, inclination adjustable up to 45°, mounted in extremely smooth-running steel guide - Anodized dressing fence ruler - Pivoting auxiliary stop Type 1545 - Console for feeding apparatus - Bridge protection TXF type 1570 with hinged cover - automatic engine brake - automatic star-delta start, motor protection switch - planed in the factory

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 402, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, saw blade diameter: 300 mm, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes Nedpfxovi H Die Ad Nekt foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: excellent (used), Thickness 610 mm, 4-knife cutterhead, segmented pressure bar, rollers in the thickness table Njdpfx Adexv Dl Te Njkt

Condition: excellent (used), Year of construction: 1992, For sale is a used Panhans thickness planer, model 426, with a planing capacity up to 230 mm. The machine is in good condition and has been serviced and inspected by our qualified staff. Technical specifications: - 4-knife Tersa cutterblock - Planing width: 630 mm - Maximum height capacity: 230 mm - 2 feed speeds Nodpewza Tysfx Ad Nokt - Extractor connection Ø 160 mm - Motor power: 7.5 kW - Year of manufacture: 1992 The planer is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Related terms: planer, thickness planer, thicknessing machine, Dickte, Felder Reference: R-S24F9

Condition: good (used), Year of construction: 1997, Working width 630 mm Four-blade shaft Steel feed / rubber feed Nedpfsv E Dv Iex Ad Nokt Articulated pressure beam

Condition: used, Year of construction: 1993, with Centro-Fix reversible blade Machine cleaned, lubricated, partially repainted made operational, functionally tested fully adjusted Test run Various parts replaced: 4x Tersa blades Rubber guard Used Make: Panhans Type 426 Year of manufacture: 1993 Machine no. 1399 Nodjv Hht Tjpfx Ad Njkt GS wood dust tested Motor 7.5 kW Planing width approx. 630 mm Planing height approx. 250 mm Table guide rollers: 2 adjustable Articulated pressure beam Steel feed roller Rubber feed roller 2 feeds Number of knives: 4 Centro-Fix reversible knives Digital display for planing height Electric height adjustment with handwheel fine adjustment Sound insulation Extraction connection D 160 mm Space requirement approx. 1300 mm x 1100 mm x 1100 mm Total connected load approx. 8.5 kW Storage location: 97447 Gerolzhofen, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty

Condition: used, Year of construction: 1986, from model making workshop Machine fully cleaned, lubricated, completely readjusted, partially overhauled Nsdpfxswhqw Ao Ad Nokt Planer knives replaced, Drive belt replaced, Table slats replaced, Test run with planing Knives sharpened and installed Used, excellent condition, low operating hours Manufacturer: Panhans Model: 426 Year of manufacture: 1986 Machine no.: 670 GS-tested Upgraded motor: 7.5 kW Planing width approx. 630 mm Planing height approx. 250 mm Adjustable table feed rollers Segment pressure beam Segment infeed roller Feed speed 7–14 m/min Number of knives: 4 Knife system: strip planer knives Digital display for planing height Electric height adjustment with fine handwheel control Extraction connection D 160 mm Space requirement approx. 1200 mm x 1000 mm x 1400 mm Weight approx. 1150 kg Location: 97447 Gerolzhofen, free loaded on truck, unpacked Delivery in current as-inspected condition, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 27,750 h, overall weight: 8,100 kg, This 3-axis PANHANS POLYPAN 47 was manufactured in 2006. It features 4200 mm cutting length and width, maximum cutting heights of 72 mm at 0° and 40 mm at 47°, and a saw carriage speed up to 100 m/min. Main motor power is 13.5 kW, with a scoring unit. Weighs 8100 kg. If you are looking to get high quality sawing capabilities consider the PANHANS POLYPAN 47 machine we have for sale. Contact us for further details. • Configuration: Machine including control cabinet • Cutting length (SL): 4200 mm • Cutting width (SB): 4200 mm • Max cutting height (saw blade vertical 0°): 72 mm • Max cutting height (saw blade swiveled 47°): 40 mm • Cutting accuracy (saw blade vertical 0°): +/- 0.1 mm • Cutting accuracy (saw blade swiveled): +/- 0.2 mm • Angle accuracy (feed speed < 10 m/min): +/- 1 mm • Angle accuracy (feed speed > 10 m/min): +/- 2.5 mm • Feed speed (saw carriage forward/reverse): 0–100 m/min • Feed speed (width stop forward): 25 m/min • Feed speed (width stop reverse): 100 mm • Axis travels (minimum plate size): X = 300 mm, Y = 100 mm • Axis travels (maximum plate size): X = 2800 mm, Y = 750 mm • Max drilling diameter: 13 mm • Max total length: 115 mm • Number of tools: 1 drilling spindle • Tool holder: Quick-release chuck DM 1-13 • Connection values • Total connection value: 21.0 kVA • Nominal current: 3x 32 A Nodpfx Aox D Rtyed Njkt • Pneumatic connection: 8 bar (minimum 6 bar) • Air consumption: 3 liters/min per clamp • Sound pressure level (Lpa) at operator position: 86 dB(A) • Sound power level (LWA): 103 dB(A)

Condition: good (used), Year of construction: 1980, Table dimensions 1.100 x 760 mm Motor output 4,7 kW Nedpoxzuwwsfx Ad Nekt Spindle diameter 30 mm reus 3.000/4.500/6.000/9.000 U/min

Condition: good (used), Year of construction: 1981, Manual height and swivel adjustment of the milling spindle Control panel positioned on top Table size approx. 1100 x 760 mm Table height approx. 865 mm Motor power 4.7/5.7 kW Spindle speeds 3000/4500 / 6000/ 9000 rpm Height adjustment approx. 150 mm Space requirement approx. 1300 x 1100 mm Weight approx. 850 kg Nedoycczzepfx Ad Nokt Further technical details on request All data taken from a brochure, therefore all information is provided without guarantee.

Condition: used, Year of construction: 1971, Knife block Z = 2 planer knives, planing width 520 mm Nksdpfx Aov I Eated Not Storage location: Nattheim

Condition: good (used), Year of construction: 1994, functionality: fully functional, 3000 mm table, 5.5 kW, top control panel, auxiliary fence, jointer bar, 630 mm planing width, 4-knife cutterhead, 45° fence, weight 1400 kg, good condition. Transport available at extra cost! Nkjdpfx Adeybufvj Njt

Condition: good (used), Year of construction: 1994, functionality: fully functional, Table tiltable via handwheel, lower and upper roller guide, brake motor 400 Volt, 3 kW. Transport available at an additional cost! Nedoybllyepfx Ad Nekt

Condition: used, Year of construction: 1991, Table size: 1100 x 760 mm Table height: 870 mm Cutter spindle mount: MK 5 Speeds: 3000/4500/6000/9000 rpm Height adjustment: 120 mm Table opening swivel plate diameter: 450 mm Swivel range: -5° to +45° Weight: approx. 850 kg Storage location: Supplier Nodpfxjx It Ans Ad Nekt

Condition: used, Heavy-duty thickness planer Panhans 436 Planing width: 630 mm Planing height: 250 mm Electric height adjustment with tenth-millimeter touch button – digital Tersa cutter block Table with four-way guidance Main motor 7.5 kW Feed speed: 7 + 14 m/min Segmented infeed and outfeed rollers made of rubber, oscillating Segmented pressure beam made of solid aluminium – oscillating Machine is FULLY REFURBISHED IN WORKSHOP, IN EXCELLENT CONDITION Nsdsx U S Rdepfx Ad Nskt Available from stock Lieboch

Condition: used, Type 693 Euro5 Year: 1996 General data Cutting length: 3200 mm Nksdpfxeyac Ebo Ad Net Cutting width: 2650 mm Max. cutting height: 60 mm Main saw Speed: 2870 rpm Power: 5.5 kW Max. Ø280 mm Scoring saw Speed: 2850 rpm Power: 1.1 kW Max. Ø125 mm Total connected load: 8 kW Machine weight: 3150 kg

Condition: repair required (used), Year of construction: 1991, Tilting spindle moulder Nkedsx Tgtwopfx Ad Net Manufacturer: Panhans Model: 240 Year of construction: 1991 The electrical detection of the actual angle value does not function. Table: 260 x 80 cm Power: 11 kW Swivel range: -5° to +45° Angle adjustment: Electric Height adjustment: Electric Speeds: 3/4.5/6/9,000 rpm Left/right rotation: Yes Motor brake: Yes Weight: approx. 780 kg Incl. power feed unit

Condition: excellent (used), Planer 510 mm, 3 m, with Suva guard Njdpfxoxv Diro Ad Njkt