Used Pallet Wrapping Machine for sale (69,534)

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 3704, Volt: 220 // Hz: 50 WITH PEDAL Bedpfjyyv R Ssx Albowt

Condition: excellent (used), Manufacturer / Origin: Blipack / Switzerland Bwodpfowifabsx Albst

Condition: excellent (used), Storti GSI 170 TA 9 pallet production line Bwsdpeu N Svzefx Albst The GSI 170 TA 9 machine is a hydraulic nailing line designed for pallet production. It has a drive system with an alternating nailing carriage, and a marking burner to efficiently meet the needs in pallet manufacturing companies.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Storti Nailing Line GSI/150-AL2 – pallet line The Storti GSI/150-AL2 pallet nailing line is designed for efficient pallet production. This robust industrial machine is suitable for automated pallet assembly, offering reliable performance and increased production capacity. Holtec Variocut VC-SHKA-HPI – cut-to-length saw / optimization line Bwjdpfx Ajzgayuelbjt This industrial machine is designed for precise and efficient wood cutting. It is suitable for woodworking operations requiring reliable performance, high output, and accurate material cutting.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Bsdpfsvvlyiox Albjwt Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 06/2027, working width: 800 mm, conveyor belt width: 800 mm, type of input current: three-phase, total width: 1,000 mm, total length: 900 mm, total height: 1,400 mm, TOP Wrapping Machine – Spiral-Shaped Pastry Wrapping Machine Universum Kasper Model: HWM 60/80 For all types of dough, such as pretzel dough, breadsticks, and lye pastries, etc. TOP Universal – Combination – Wrapping Machine For all types of dough suitable for wrapping and long-rolling Simple spiral-shaped pastry wrapping machine with a long-rolling attachment Machine is mobile Stainless steel construction Connection: 400V, 16A CEE plug Used machine, refurbished With warranty and spare parts service Optional: Delivery service Feeding device Weight range: 350 to 1000 grams Service package Bwodpfxjwc H R Us Albjt Maintenance contract Training and commissioning Leasing and rental service We have a TOP selection of wrapping machines in stock!

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, input voltage: 400 V, DGUV certified until: 06/2027, working width: 550 mm, conveyor belt width: 650 mm, type of input current: three-phase, total width: 840 mm, total length: 1,300 mm, total height: 1,250 mm, input frequency: 50 Hz, TOP Croissant Rolling Machine Gio 4 CF with long roller with infeed conveyor Weight range approx.: 50-2000g depending on the product for the production of sticks, loaves, and croissants Rolling width max.: 550 mm Long roller adjustable up to 650 mm width Stainless steel design, mobile Dimensions approx.: 840 x 1300 x 1250 mm, WxDxH Used machine with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Bedpfew Tub Ijx Albowt Option: Delivery Maintenance contract Service package Training & commissioning We have more long rollers in stock!

Condition: good (used), Pallet racking cutting machine, block cutting machine. Bsdpfx Alozd Rpusbewt

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 06/2027, working width: 300 mm, conveyor belt width: 300 mm, type of input current: three-phase, total width: 600 mm, total length: 700 mm, total height: 1,400 mm, Twisted bread wrapping machine, Universum HWM 30 TOP wrapping machine Universum Kasper, Model: HWM 30 Twisted bread wrapping machine, mobile for all types of breadsticks, such as pretzel sticks and lye breadsticks, etc. Universal wrapping machine for all types of dough suitable for wrapping Stainless steel design 300 mm belt width for best results robust technology Connection: 400V, 16A CEE plug Dimensions approx.: 600 x 700 x 1400 mm, WxDxH Used machine, overhauled with warranty Quality from a specialist company! Benefit from over 35 years of experience! Options: Conveyor belt EB Delivery service Bwjdpfx Ajw U Ittjlbjt Service package E-box for increased safety Maintenance contract Training and commissioning Visit our large bakery machine exhibition!

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 2026, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 06/2027, working width: 320 mm, type of input current: three-phase, total width: 630 mm, total length: 710 mm, total height: 1,220 mm, Erka WML 30 Croissant Wrapping Machine Wrapping band width 320 mm for all types of dough, such as croissant dough, pretzels, and lye sticks, etc. Universal combination wrapping machine for all types of dough for wrapping and long rolling Long rolling table, foldable simple, robust technology mobile croissant wrapping machine Connection: 400V, 16A-CEE plug Dimensions: 630 x 710/1110 x 1220/1300 mm (W x L x H) Used machine, refurbished with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Optional: Bwodpfxjw Tqklo Albet Maintenance contract Feeder Spare parts box for added security Service package Delivery service Instruction and commissioning We have a large selection of croissant wrapping machines!

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Bedpfeu Nu Hiox Albswt Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 06/2027, working width: 600 mm, conveyor belt width: 600 mm, type of input current: three-phase, total width: 790 mm, total length: 820 mm, total height: 1,300 mm, TOP Twisting Machine Universum Kasper, Model: HWM 40/60 For all types of dough pieces such as pretzels, breadsticks, and lye sticks, etc. Universal combination twisting machine For all types of dough suitable for twisting and forming long rolls Twisting machine with lower long-roll former Machine is mobile Connection: 400V, 16A-CEE plug Dimensions: 790 x 820 x 1300 mm, WxDxH Used machine, refurbished With warranty + service Bodpfxsvvqhre Albewt Options: Delivery service Weight range of 300 to 800 grams With conveyor Service package Maintenance contract Spare parts box Instruction and commissioning Leasing & rental service Many other TOP bakery machines in stock!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: W0109111, working width: 1,400 mm, stack height: 1,800 mm, product height (max.): 80 mm, Automatic wrapping machine, Ream wrapper mid-speed wrapping of all metric and standard U.S. ream sizes including half-ream packages. Machine capable of wrapping paper reams ranging in dimensions from 297 x 420 mm (A3) up to 1000 x 1400 mm. The machine ensures maximum flexibility thanks to its quick changeover features. The reams are manually feed by the operator, who controls all the machine's operations. The reams are wrapped in polyethylene or kraft paper, pre-cut into the sheets required for wrapping. Afterwards, the reams are stacked and placed in the collection station. The set of rolls can be installed on either the right or left side of the machine upon request. Bodpfoy Ufh Nsx Albjwt

Condition: reconditioned (used), Year of construction: 2005, machine/vehicle number: 3069 / BM5132, BM5132 Professional wrapper with stretch film height adjustment Bwjdpfxoqpgl Rj Albot Wrapping height approx. 2,500 mm Turntable diameter 1,600 mm max. load 1,600 kg Film roll width 500 mm Weight approx. 500 kg Supply voltage 400V - 50 Hz - 3 Ph

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, High-end 5-axis flipping machine for aluminum structural components available at short notice. 90–95% completed, available for on-site demonstration under power. Delivery approx. 3 months. For sale is a state-of-the-art horizontal 5-axis flipping machine (HM2040AL-AC), specifically designed for machining large-format, thin-walled aluminum structural components in the aerospace sector. The machine is approximately 90–95% completed, installed at the factory, and can be inspected under real machining conditions. 👉 This machine platform has already been installed more than 80 times. Highlights - Available at short notice (delivery time approx. 3 months) - High-end configuration (Fischer / Siemens / Heidenhain) - Full 5-axis machining in a single setup - Integrated flipping system (90° rotation) - Ideal for aerospace aluminum structures - Very attractive price-performance ratio - Includes 2 pallets sized 2000 x 4000 mm, setup station, and rotary table Technical Data - Travel: 4300 / 2200 / 650 mm - Table size: 4000 × 2000 mm - Max. load: 4000 kg - Rapid traverse: 50 m/min - Feed rate: 30 m/min Bjdpfxoy H Ncbs Albewt - Positioning accuracy: up to 0.008 mm - Repeatability: up to 0.004 mm Spindle - Fischer (Switzerland) - 30,000 rpm - 125 kW - 66 Nm - HSK-A63 - ICS 70 bar Features - 5-axis torque motor swiveling head (zero-backlash) - Siemens SINUMERIK 840D sl - 60-position tool magazine - Closed-loop measuring system (Heidenhain) - Automatic flipping system - High-pressure cooling - Chip conveyor & central lubrication Options - Renishaw laser tool measurement - Workpiece probe - Ultrasonic thickness measurement (≤10 µm) - Vacuum clamping system - Spindle thermal compensation - R-TEST calibration system Including setup station and pallets! German service, spare parts warehouse, etc.

Condition: good (used), Year of construction: 1992, functionality: fully functional, product height (max.): 200 mm, product width (max.): 600 mm, nominal power: 12.75 kW (17.34 HP), Shrink-wrapping machine with infeed conveyor table, in good and functional condition. Maximum product width: 600 mm. Bodpjzb Duyefx Albewt

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MzBs001, Equipment: CE marking, Foam sealing machine, automatic upper and lower cover sealing machine, adopts PLC control,adjusts the tape to the sealing position through the adjustable handle,touches the screen to select the corresponding model and presses the start button to automatically seal the tape. The sealing effect is flat and beautiful, and the sealing is firm. It can be operated by a single machine or matched with an automatic packaging line. Widely used in food, fresh food, cold chain, e-commerce and other industries. Bodpfexu Agmox Albswt

Condition: good (used), Year of construction: 2011, TRIMMER CUT MACHINE, brand COMA 3 blades. One fixed, on the left, and the others mobile Maximum distance between the 1st and 3rd blade: 3.100 mm 1st simple feed chain Bjdpfx Aljza Hlrobjwt 2nd double feed chain 3rd simple feed chain Machine completely revisioned

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, DGUV certified until: 06/2027, working width: 300 mm, conveyor belt width: 300 mm, type of input current: three-phase, total width: 500 mm, total length: 483 mm, total height: 1,400 mm, Erka WMB 30 Rolling Machine for all stick types such as Kornspitz, pretzels, and lye sticks, etc. Combo rolling machine for strands/pretzel strands Stainless steel design Machine is mobile Connection: 400V, 16A CEE plug Bodexxgm Espfx Albowt Used machine with warranty + spare parts service Option: Maintenance contract Service package Training & commissioning Delivery service Leasing & rental service We have many more rolling machines in stock!

Condition: used, BENHIL 8380 Butter Filling and Wrapping machine for 250gr Current Format | IN STOCK Benhil 8380 Butter Filling and Wrapping Machine Machine Benhil 8380 Capacity up to 80 packets/min (4.800 p/h) Pack size 250 gram Dimensions 100mm x 75mm x 35mm Product Butter, margarine, etc. Wrap material Aluminium foil or parchment paper in reels. Weight 2.000 kg (gross) Dimensions Approx. 200 x 150 x 200 cm (l x w x h) Electricity 2,2 kW Condition ‘’as is’’ Good Condition (Complete) Price fully refurbished: Ask for Quote Bwedszbg Eujpfx Albjt

Condition: used, Year of construction: 2001, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, total height: 3,050 mm, total length: 7,109 mm, total width: 7,805 mm, overall weight: 11,600 kg, table length: 500 mm, table width: 500 mm, controller model: Fusion 640 M, rotational speed (max.): 15,000 rpm, rotational speed (min.): 35 rpm, spindle speed (max.): 15,000 rpm, spindle speed (min.): 35 rpm, table load: 500 kg, Horizontal Machining Centre with Palletech CNC Control Mazatrol Fusion 640M Pallet table size 500 x 500 mm Bwjdpfxsy Nz Iuo Albet Number of pallets 10x Table load 500 kg Movement X-axis 710 mm Movement Y-axis 610 mm Movement Z-axis 660 mm Table indexing 360 x 1° Spindle Taper DIN 69871A Spindle speed 35 - 15.000 R/min Magazin capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2026, functionality: fully functional, Pallet Board Stacker PBS M4 + DS-1.0 Automatic Pallet Production Line Stacker with Crosscut saw (DS-1.0) Automatic pallet board stacker designed for efficient integration into pallet production lines. Ensures precise board alignment, stable stacking and high production capacity with minimal manual handling. Included equipment: -Control program -Stacker with integrated lift -Board unscrambler -2 spacer dispensers with support frame -Discharge conveyor with lift platform Bwedpjzauclofx Albst -Package lift for easy forklift handling -Suitable for continuous industrial pallet board production. High-performance double-rip crosscut saw designed for seamless integration into automated board production and stacking lines. Crosscut saw (DS-1.0) -Specifically built to operate within a board stacker line. -Synchronized Workflow - automatically matches the speed of the stacker for maximum efficiency. -Clean Cuts - precise double-blade system for high-quality cross-cutting. -Designed for 24/7 sawmill environments. -Ideal for sawmills looking to automate the transition from cutting to stacking with zero bottlenecks.

Condition: new, Year of construction: 2025, total width: 2,250 mm, total height: 1,800 mm, total length: 3,000 mm, warranty duration: 12 months, overall weight: 700 kg, power: 1 kW (1.36 HP), Automatic Pallet Nailing Machine for Wooden Pallets PT 1000 Plus – Polish Manufacturer. 100% brand new equipment. The nailing machine utilizes CN coil nailers for nails in coils. Device description: The nailing machine consists of a single working table. The finished pallet is ejected on the opposite side of the machine, allowing for easy integration with the Forest PT 16 stacker. This configuration ensures full utilization of the device. Capable of nailing pallets with: • Deck with 5 boards + 3 bottom boards • Deck with 6 boards + 3 bottom boards • Deck with 7 boards + 3 bottom boards • Deck with 9 boards + 3 bottom boards • Pallets with stringers (runners) Possible pallet dimensions: max 1200x1200mm, min 600x600mm - Dimensions: length 3000cm, width 2400cm, height 1800cm - Quick adjustment for pallet size – height is automatically set; deck boards do not need to be perfectly uniform in thickness. Bwodem E Np Uopfx Albot - Simple operation with flexible nail placement and selectable nailing mode and quantity per joint - Standard configuration includes 8 nailers, with option to install up to 10 units.

Condition: used, Year of construction: 2002, Machine for cartoning glass bottles, for packing the carton packages on trays with subsequent shrink film wrapping. Bwedey Nm Ruopfx Albet Additional title: Five‑step machine Capacity: 26000 bo/min when packing 24 x 0.33 litre bottles Cycle time: 18 cycles/min when packing 24 x 0.33 litre bottles Formats: Trays with 4 x six-packs or 3 x eight-packs for 0.33 litre bottles, boxes with 20 x 0.5 litre bottles also possible Features: Tray erector/adhesive application (Nordson ‘Problue Flex’, built in 2021), carton packer, tray packer, shrink film machine, drying tunnel, date coding (best-before date marking)

Condition: ready for operation (used), functionality: fully functional, total length: 5,000 mm, film width: 550 mm, product height (max.): 200 mm, product width (max.): 400 mm, product length (min.): 80 mm, Equipment: documentation/manual, Shrink wrapping machine Manufacturer: Hugo Beck Type: Flexo 500 S Horizontal flow wrapping machine with side sealing for tubular film, consisting of a wrapping machine and a subsequent shrink tunnel. The Flexo 500 tubular film machine boasts the highest degree of variability and flexibility. Whether for frozen pizzas, biscuit boxes, fruits and vegetables, books, skis, laminate flooring, or various household products, etc. – with this machine, you can quickly adapt to any application, for example, for daily changing orders. - Wrapping machine Hugo Beck Flexo 500 S, year of manufacture 2003 Workpiece dimensions: Width approx. 55 - 400 mm Height approx. 2 - 200 mm Length from min. approx. 80 mm to theoretically unlimited Consumable/film: half-tube, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate approx. 20 m/min. Rated voltage 400/230 V, 50 Hz, 3 phases Rated current 5 A Connected load 3 kW Machine dimensions approx. 2500 x 1500 mm L x W Weight approx. 650 kg - Shrink tunnel Hugo Beck Type HV 601, year of manufacture 2002 Working width approx. 600 mm Clearance height approx. 300 mm Bodpfx Alsyw H Rkobowt Feed rate continuously adjustable Chain slat conveyor, silicone-coated transport slats Temperature control via electric thermostat, separately adjustable lower and upper heat Heating approx. 4 - 12 kW Rated voltage 230/400 V, 50 Hz, 3 phases Rated current 19 A Connected load approx. 12 kW Machine dimensions approx. 2500 x 1100 mm L x W Weight approx. 400 kg