Used Packer for sale (292)

Condition: used, Year of construction: 2003, First registration: 26.03.2003 / _____ / with rear roller / new bearings / / with cam packer rear roller / with / catch hooks / 900 ring diameter / / Kdodjqrrt Nepfx Ah Njg

Year of construction: 2023, condition: used, Henkovac vacuum packers brand-new 2023 models available from stock. Advertised in the photo's Kjdpfx Aoku H I Soh Nedg Henkovac M4 Henkovac M6 Henkovac D1 Henkovac D4 All models are equipped with upgraded vacuum pumps for more performance, sensor control, filling plates, soft-air. Contact us for more specific information and photo's.

Year of construction: 2022, condition: like new (used), Rovema VPX 250 rebuilt-to-new, with new Rovema auger powder filler, Siemens S7 electronics, 12 months guarantee! Kdedpfohtfdwox Ah Neg

Condition: used, GAP-027-0033 Unpacker, make BMS, type: Lina EP, with each 3 heads, with pack head magazine for 0,33 lt. longneck bottle + 0,5 lt bottle, format 4x6 / 4x5, with SPS-control, built 2005, already dismantled, ex location for sale. GEP-028-0034 Kodpfx Ahov Evhve Nodg Packer, make Datz, type: EP-2, with 2 heads, for 0,33 lt longneck bottle + 0,5 lt bottle, crate format 6x4 and 5x4, Height of crate inlet 270 mm, height of bottle outlet: 890 mm, built 2000, dismantled, for sale

Condition: used, Year of construction: 2022, Working width 6.10 m Prismatic roller Self-cleaning cast iron prismatic roller, with hydraulic / folding pressure compensation Chassis with 15.0/44-17 tires Drawbar with / bottom hitch including warning signs with LED B / Kdedpfot Dxnfex Ah Njg

Condition: used, Year of construction: 2004,

Condition: ready for operation (used), Year of construction: 2018, A wrapper and packer for glass bottles from a bottling line are available. Bottle formats: 500ml/1000ml, crate formats: 6/12, pallet type: Euro pallet, height of loaded pallet min./max.: 500mm/1800mm, wrapping capacity: 60 pallets/h. Documentation available. On-site inspection is possible. Kdjdpfx Aottbdwjh Nsg

Condition: ready for operation (used), Year of construction: 2019, Product length: 100-600mm, product width: 100-400mm, max. product height: 220mm, max. output: 30 cycles/min. With documentation, 22m long conveyor belt, e-commerce applications and many spare parts. Several pallets with roll film are available. On-site inspection is possible. Kodpfx Ahswal Iaj Nodg

Condition: ready for operation (used), Year of construction: 2005, Control system: Siemens SIMATIC OP7. The machine needs to be cleaned and serviced, is otherwise in working order and was in operation until the shutdown. An on-site inspection is possible. Kdsdpfjwal Imsx Ah Neg

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, 2 x Case packing systems with bale arm tray palletiser's. Includes; 2 x CLP case packing systems previously used for heat sealed plastic trays. 2 x Dicoma bale arm tray palletiser's. Kdedpfxovzx Tmj Ah Nog 2 x Case packing systems tray de-nester's. Year on manufacture 2016 The machines can be sold as one or can be split into two individual lines.

Condition: used, Year of construction: 2024, Use for lower link trailer Transport preparation open CW 12200 / Cambridge rings smooth LED lighting for the road Lower link trailer Cat 3 / Braked axle 3.3-4.2T Type approval EU - COC Protection against / unauthorized / Kodpfxott I N Sj Ah Nedg

Condition: ready for operation (used), Year of construction: 1999, A semi-automatic Haver & Boecker bag filling machine is available. Stations: 6, max. bag weight: 25kg, filling capacity: 1600 bags/h, bag formats: Quicklime/hydrated lime/cement/gypsum, grain size: adjustable, control: Siemens S7. The machine was brought up to date in 2025. Documentation available. On-site inspection is possible. Kodpjv Tcq Hjfx Ah Njdg

Condition: new, Year of construction: 2025, Banding machine for bundling multiple products with PE film without shrink process. Compact, robust design, easy to operate, quick film change. Bundle size: L(50-200)xW(50-130)H(30-280) mm; suitable bundle tape: PE film; PE film width: 40 ~ 80mm; PE film thickness: 50 ~ 80µm; Speed: max 10 bundles/minute at 10 boxes per bundle, max 15 bundles/minute at 5 boxes per bundle; power: 0.5kW, 220V /50Hz; compressed air: 6bar; dimensions: L1600xW600xH1500 mm; weight: 300kg. Ksdpfx Ahjv Nku Se Njdg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2022, Side plates Working width 3.0 m Transport width 3.0 m Rear scraper / prism roller Ø 45 cm with rigid three-point tower Working width 2.9 m / transport width 3.0 m Tine attachment 3.0 m 3-beam, rigid, line spacing approx. 15 / cm, complete with long Kdedpfx Ahst Dv N Ts Neg

Condition: ready for operation (used), Year of construction: 2005, GAP-027-0033 Unpacker, make BMS, type: Lina EP, with each 3 heads, with pack head magazine for 0,33 lt. longneck bottle + 0,5 lt bottle, format 4x6 / 4x5, with SPS-control, built 2005, already dismantled, ex location for sale. GEP-028-0034 Ksdpfx Aspm Hqzsh Nsdg Packer, make Datz, type: EP-2, with 2 heads, for 0,33 lt longneck bottle + 0,5 lt bottle, crate format 6x4 and 5x4, Height of crate inlet 270 mm, height of bottle outlet: 890 mm, built 2000, dismantled, for sale

Condition: ready for operation (used), Year of construction: 2002, Output: 400 cycles/h, conveyor belt: single-lane, bottle table: T-version, gripper head: 1-dimensionally adjustable, packaging unit: max. 9 heads. Bottle crate dimensions: 1l plastic crate: 400mm/300mm, 0.5 plastic crate: 300mm/200mm, max. conveying capacity: 1850mm, transport heights: Bottle table height: 1200mm, container height conveyor: 750mm, control: Siemens S7. Dimensions X/Y/Z: approx. 4200mm/1900mm/1900mm, weight: approx. 4300kg. Including gripper for 1l VDF and 0.5l NRW. Documentation available. On-site inspection is possible. Kdsdpfx Ajtul Nreh Nog

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Rust-free INOX construction with aluminium parts anodized. The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Kdedpjvubapefx Ah Nog Sealing lid from a film roll For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 7,500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: ready for operation (used), Tray Packer from Wächter The tray/open-end carton is picked up, folded (erected), loaded with cans or jars, and sealed. For many different formats. Output up to 35 trays/min. The machine can be purchased as-is (working) or completely overhauled and configured to your format. Are you looking for other filling machines, sealers, conveyors, or packaging machines for your production? Contact us. We only have a small selection listed online. Kedpfx Ahovxu Syj Nedg

Condition: ready for operation (used), Tray Packer from Wächter The tray/open-end carton is picked up, folded (erected), loaded with cans or jars, and sealed. For many different formats. Output up to 35 trays/min. The machine can be purchased as-is (working) or completely overhauled and configured to your format. Are you looking for other filling machines, sealers, conveyors, or packaging machines for your production? Kdodpjvxu Nlofx Ah Njg Contact us. We only have a small selection listed online.

Condition: ready for operation (used), Year of construction: 1993, An automatic valve bag filling system for cement bags Rotopacker is available. Packaging capacity: 2400 bags/h, number of filling stations: 8, filling station type: spouts, cylinder: Festo pneumatic cylinder, cylinder stroke: 150mm. Documentation available. On-site inspection is possible. Kdjdpfx Ahjuml S No Nsg

Condition: used, Year of construction: 1996, Overview  This automatic crater was manufactured in 1996 by the German company Otto Fleischer. The Rota/1/E model is a single-head packing machine. It is still installed and immediately available. Technical data  Manufacturer: Otto Fleischer Type: Rota/1/E year of manufacture: 1996 Bottle formats processed: 0.7L (GDB) Operating pressure: approx. 6 bar Power supply: 380 V / 50 Hz / N / PE Connected load: approx. 4 kW Control voltage: 24 V Kdjdpfxsyb Srto Ah Neg

Condition: used, Year of construction: 1993, Overview  This decrater was manufactured in 1993 by the German company Otto Fleischer. The Rota/1/A model is a single-head unpacking machine. It is still installed and immediately available. Technical data  Bottle formats processed: 0.7L (GDB) and others  one-head operation 90° infeed-outfeed design Operating pressure: approx. 6 bar Power supply: 380 V / 50 Hz / N / PE Connected load: approx. 4 kW Control voltage: 24 V Kodpfjyb Srgjx Ah Njdg

Condition: used, Year of construction: 1982, Overview  This bottle unpacker was manufactured in 1982 by German company Joha. The machine was part of a bottling line operating at 2,500 bph and is immediately available. Technical data Capacity: Part of a line running at 2,500 bph Formats: Prepared for 0.33 L Longneck Unpacking head: Packing head for 24 bottles in a modular crate Kdodpsyb Snzjfx Ah Njg

Condition: new, functionality: fully functional, The Table Top Print bagging machine enables efficient packaging and sealing of products in pre-made bags and is suitable for various formats. The machine is easy to operate and features a user-friendly display for setting up, saving jobs, and controlling operating parameters. For maximum flexibility, it offers automatic and manual operating modes with a secure sealing bar. Training a packaging operator takes less than five minutes. With integrated thermal transfer printing technology, bags can be directly printed with high-resolution graphics, text, and barcodes—eliminating the need for separate labeling. Features: - Multi-color display for straightforward settings - Pre-selection of desired product quantity for packaging - Integrated total product counter (with reset function) - Roll change in under one minute - Sealing via foot pedal, automatically, or manual push-button - Feed systems for automatic bag filling available on request Technical Parameters: 1. Maximum bag length: 450 mm 2. Maximum bag width: 250 mm Kjdpexlzr Asfx Ah Njdg 3. Maximum bag thickness: 0.04–0.1 mm per layer 4. Packaging speed: up to 25 units/minute 5. Supply voltage: 1Ph. 220V 50Hz 6. Power consumption: approx. 1 kW 7. Machine weight: approx. 70 kg (including printer) 8. Machine dimensions: approx. 670 x 665 x 860 mm 9. Print area: 53 x 75 mm 10. Bag type: wicketed bags on rolls Base machine: €12,500 + Thermal transfer printer: €5,500 + Label dispenser: €2,900 + SATO label printer incl. dispenser: €6,500 to €9,000

Condition: ready for operation (used), Year of construction: 2007, A Haver & Boecker bagging machine is available as a test machine for filling various powdery bulk materials including an MEC 3 weighing electronics. Weighing range: 10kg-50kg, adjustment increment: 50g, bag filling weight: 25kg, bagging capacity at 25kg: approx. 180/h, max. product moisture: 0%, product filling temperature: 20°C, bag material: 2-layer paper/PE with filter fleece. Documentation vorhanden. An on-site inspection is possible. Kjdpfxox U Dv Sj Ah Nodg