Used Packaging Devices for sale (23,108)

Condition: used, Year of construction: 2011, total height: 2,000 mm, total length: 8,400 mm, total width: 1,080 mm, Colour: Grey Weight: 3.500 kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/335516 - Number of units [pcs]: 12 - └ 1st unit type: Spraying device - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit Kdedpjyudwzefx Ah Eot - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Tools available: Yes - └ 10th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 68 - Fuse [A]: 68 - Transport dimensions: 8400mm x 1080mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2015, operating hours: 14,500 h, functionality: fully functional, overall weight: 70 kg, load capacity: 8 kg, arm reach: 400 mm, pivoting range: 360 °, controller manufacturer: Stäubli, controller model: CS8C, teach pendant manufacturer: Stäubli, teach pendant model: SP1, control cabinet width: 445 mm, control cabinet height: 455 mm, input voltage: 230 V, input current: 16 A, repeat accuracy: 0.01 mm, For sale is an industrial SCARA robot system from the renowned manufacturer Stäubli. This system is characterized by its extremely high precision and speed and is in good, well-maintained condition. The package is complete and consists of the robot arm, the matching controller, and the handheld operating device. The robot was only used for a few hours for a test project. Technical data & system components: Robot type: Stäubli TS40 (4-axis SCARA robot) Controller: Stäubli CS8C Operating device (teach pendant): Stäubli SP1 Manual Control Unit Operating hours: Only 14,576 hours (very low operating hours for this system) Condition: Used, fully functional Special advantages of this offer: Error-free system status: The controller starts up without any errors. The display of the operating device explicitly states: "Hardware signal error: no error." Low operating hours: With just over 14,500 operating hours, the system still has a large part of its service life ahead of it. Complete package: Including all necessary connection cables (as shown in the pictures). Sales and delivery conditions: Price: €9,800 (negotiable) Legal note: Sale is made from our location with exclusion of any warranty or guarantee (sold as is, ideal for B2B / commercial / export). Shipping/collection: Shipping can be arranged, but must be paid for by the buyer. Kdjdpfezl Nq Tox Ah Eet The system can be inspected by prior appointment. If you are interested or have any questions, please do not hesitate to contact us or send us your price offer!

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 905312, functionality: fully functional, cutting height (max.): 2,150 mm, cutting width (max.): 4,150 mm, saw blade diameter: 250 mm, overall weight: 850 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. vertical cutting height: 2,150 mm Max. cutting width: 4,150 mm Max. cutting depth: 55 mm Max. saw blade diameter: 250 mm Vertical cutting: Yes MACHINE DETAILS Voltage: 380 V Kdjdpfozzbb Aex Ah Ejt Current consumption: 6 A Power: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 4,850 x 1,350 x 2,830 mm Weight: 850 kg Shipping packages: 1 unit EQUIPMENT CE marking

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand finishing machine, the “Canon Multifunction Pro Puncher B1” Item for sale: Kdjdpez Aqy Rofx Ah Ejt 1 x Canon Multifunction Pro Puncher B1 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: good (used), Year of construction: 2019, operating hours: 1,500 h, functionality: fully functional, total length: 2,420 mm, total height: 1,650 mm, total width: 13,600 mm, type of input current: three-phase, product height (max.): 250 mm, product width (max.): 630 mm, input voltage: 400 V, overall weight: 710 kg, power: 29 kW (39.43 HP), Ulma shrink tunnel. Only used as a replacement machine. Very good condition. Speed: 3 - 14.5 m/min | Double heating chamber | Dimensions: 2,420 x 1,360 x 1.650 mm | Weight: 710 kg | AIR FLOW CONTROL THROUGH FREQUENCY CONVERTER AND SOLID STATE RELAY | SHRINK TUNNEL PRECHAMBER AT INLET AND OUTLET | 220 MM HIGH CHAMBER | LEFT VERSION, PRODUCT RUNS FROM RIGHT TO LEFT | SELECTION FOR PURE "TRANSPORT MODE". Hot air fixation tunnel, an ULMA shrink tunnel model designed for shrinking film around previously packaged products. (Products previously packaged in side sealers, banding machines, flow wrappers, overlapping machines or any other packaging machine). Tunnel with high heating capacity, low consumption and low heat loss. Solid painted tubular steel frame. Easy integration into existing lines. Height-adjustable machine feet and wheels for installation and transportation. Product flow of the machine from right to left. Movable rollers with silicone coating. Electronic temperature control. Control of the transport speed. Kdjdpfx Ahotva Sgs Eet Air is evenly distributed inside the chamber, guaranteeing great energy savings. Maximum insulation to reduce heat loss. Electric cabinet with ventilation. Protective devices and safety systems in accordance with CE standards. Consumption: 14.5 KW/h

Year of construction: 2018, condition: excellent (used), 452 USED Imanpack flowpack bread packaging machine. TECHNICAL DATA: - Power: 4.3 kW, - Air pressure: 6 bar, - Year of manufacture: 2018. EXTERNAL DIMENSIONS (in cm) - L: 430, - W: 100, - H: 210, - Feeder length: 260. EQUIPMENT: - Label printer. Paid options available: transport of the device. Kdjdpfx Ahszlht Hj Ejt The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2334, arm reach: 3,000 mm, load capacity: 165 kg, empty load weight: 2,500 kg, control type: CNC control, number of axes: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 6 Reach: 3,000 mm Load capacity: 165 kg MACHINE DETAILS Kdjdpfx Aezzbbpoh Eet Control system: CNC Dimensions & Weight Dimensions (L x W x H): 2,000 x 2,400 x 2,500 mm Unladen weight: 2,500 kg Transport packages: 2 EQUIPMENT CE marking

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Manufacturer: WEILEDER Model: WTK -40/55 PT Category: Packaging machine Year of manufacture: 2018 Location: Ex site Availability: Short-term Operational condition: Dismantled/in storage Technical Data Passage width: 400 mm Passage height: 200 mm Workpiece length max.: 550 mm Film width max.: 600 mm Number of rollers bottom: 1 Total units: 1 Longitudinal units: 1 Magazine slots: 1 Packaging stations: 1 Conveyor technology: Stepless feed Shrink film: Longitudinal film station Kdjdpfoyatgcex Ah Est Discharge: Automatic version Mobile device closure Sealing units Conformity marking: CE marking Total connected load: 9 kW Space requirement length: 2.57 m Space requirement width: 0.87 m Space requirement height: 1.6 m

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: CON.07.10.0154, compressed air connection: 8 bar, input voltage: 230 V, total width: 1,329 mm, total length: 1,150 mm, total height: 1,725 mm, overall weight: 812 kg, pneumatic connection: 8 bar, Equipment: documentation/manual, 6-color pad printing machine from the manufacturer TAMPOPRINT, model Concentra 60-6 Max. printing area diameter (circle diameter) 55mm, total of 6 colors Year of manufacture 2010, weight 812 kg Air consumption 48 standard liters per cycle Good overall condition, machine fully functional, minimal air loss on one of the main valves. Visual condition as shown in the current photos. Scope of supply: TAMPOPRINT Concentra 60-6 as a stand model + Foot pedal + Hand crank for height adjustment of the tilting table + 6 used ink pots 60mm + 6 used printing rings (for the ink pots) + 2 used mounting tables (for ink pot and cliché mounting) + 2 used gripper tongs (for ink pot and cliché mounting) + 2 used pad coupling devices plus mounting screws (4 pad coupling devices still need to be purchased) + 1 heavy-duty hook for transporting the machine + Documentation (operating manual, parts list, wiring diagram) Option 1 6 additional used ink pots 60mm, EUR 420,- excl. VAT. Option 2 4 pad coupling devices (new) from the manufacturer, EUR 1,098,- Packaging: The machine can only be packaged by wrapping it completely in cardboard and bubble wrap; it will not be placed on a pallet. The pad printing machine can be inspected and tested in Pottendorf by appointment. Delivery: Ex works Pottendorf (Austria). Kodszwv Rwjpfx Ah Eodt For collection, only trucks with a tail lift are permitted; please note the machine's weight. The transport of this machine is at the buyer's expense and risk. Packaging costs EUR 120,- Selling price EUR 18,200,- excl. VAT. New price approx. EUR 70,000,-

Year of construction: 2013, condition: like new (used), Thermal shrink machines are devices that allow for very rapid (3–5 sec.) shrinking of bags around the packaged product by immersion in hot water. ADVANTAGES: • Attractive product appearance • Process started by a button on the control panel • Digital temperature regulation • Optimal hygiene • Robust stainless steel construction • Possibility of using insulating balls to improve process efficiency • Base immersion enabled by hydraulic actuator movement TECHNICAL SPECIFICATION DT100 Machine dimensions: 880 x 1000 x 1320 mm Chamber dimensions: 600 x 800 x 220 mm Ksdsxx Tp Hjpfx Ah Ejdt Immersion depth: 220 mm Cycle time: 3–5 sec Weight: 155 kg Voltage: 400 V-3-50 Hz Power: 15.0 kW

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, We offer you: Manufacturer: DMG MORI Type: MillTap 700 Year of manufacture: 2016 Control system: Siemens 840D sl Technical data: Travel ranges: X-axis: 700 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: -100 / +120° C-axis (interpolating): 360° Main spindle: Max. spindle speed: 10,000 rpm Drive power – main spindle (100/40%): 25 / 4.5 kW Torque: 29 / 45 Nm Work table: Table diameter: 200 mm Max. table load: 100 kg Tool changer: Tool holder: BT30 Number of tool positions: 15 Chip-to-chip time: 1.5 sec Feeds: Max. feed rate (x, y, z): 60 m/min Technical features & accessories: Kjdpfx Ajzz Hrgjh Eedt - Indirect linear encoders in x, y, and z - Spindle with increased torque - Rotary union for table; 4-channel, 2x air, 2x oil - Automation interface, automation door on the right, and hydraulic preparation - Coolant system 40 bar, 20 l/min, dual changeover filter with monitoring - Coolant supply in the working area - Coolant nozzle for chip flushing - Mechanical oil-emulsion mist separator - Safety package for power failure - Tropical package - Filter monitoring Accessories, tools shown in the images, and clamping devices are only included in the scope of supply if this is explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 73.331.611.504, functionality: fully functional, power: 18.5 kW (25.15 HP), pressing force: 175 t, stroke length: 265 mm, throat depth: 450 mm, working width: 3,050 mm, TECHNICAL DETAILS Press force: 175 t Max. working width: 3,050 mm Frame distance: 2,600 mm Ksdpfezxcf Rsx Ah Esdt Overhang: 450 mm Max. stroke: 265 mm Crowning system: CNC-controlled Number of axes: 3 Axes: Y1, Y2, X Back gauge depth: 1,000 mm Ram holder: Standard Tool holder type: European Style MACHINE DETAILS Drive system: CNC Control system: Durma Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 4,250 x 1,950 x 2,700 mm Weight: 10,520 kg Transport packages: 1 EQUIPMENT Tools CE marking

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone. Kdodpfjyq Rdyex Ah Est

Condition: used, Year of construction: 2016, operating hours: 1,171 h, functionality: fully functional, load capacity: 60 kg, arm reach: 2,050 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, teach pendant model: FlexPendant, ABB IRB 4600-60/2.05 – 6-axis industrial robot with IRC5 controller and FlexPendant The ABB IRB 4600-60/2.05 industrial robot is designed for demanding production applications and process automation. Its 60 kg payload capacity and 2050 mm reach provide high dynamic performance, high rigidity, and excellent positioning accuracy. The offered set comes from the research and development (R&D) department and includes a complete system ready for integration. The robot is ideal for applications such as: - CNC machine tending, - transferring and manipulating parts, - assembly, - packaging, - palletizing, - vision systems, - grinding and surface finishing, - R&D workstations. The set includes: - ABB IRB 4600-60/2.05 robot, - ABB IRC5 controller, - ABB FlexPendant operator panel, - complete set of robot cables. The robot has the following licenses: Advanced Robot Motion, Absolute Accuracy, Kjdpfx Ahszkbpfe Esdt PROFINET Controller/Device, World Zones, Independent Axis, Path Recovery, Path Offset, Collision Detection, PC Interface, FlexPendant Interface, Multitasking, Sensor Interface, UDPUC Driver, Externally Guided Motion (EGM). Technical condition The robot starts up correctly and communicates with the IRC5 controller. The operator panel displays message 38200 – Battery backup lost. This indicates a loss of power to the battery that supports the encoders (SMB Battery). This is a typical message after the battery has been discharged or disconnected and does not indicate a defect in the robot. After replacing the battery, a calibration/axis synchronization procedure will be necessary. Duty Time Counter: 1171 h Specification Manufacturer: ABB Model: IRB 4600-60/2.05 Year of manufacture: 2016 Payload: 60 kg Reach: 2050 mm Number of axes: 6 Controller: IRC5 Operator panel: ABB FlexPendant RobotWare: 6.08.00.01 Condition: used We provide a start-up guarantee.

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel Kdjdpfozzz Rdsx Ah Est - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 8Q00001264, For sale is a powerful and precise Wittmann linear robot W822-1264 for injection molding applications and automation tasks. The unit is packaged and secured on a Euro pallet and comes with the matching handheld device (teach pendant), emergency stop buttons, cabling, and the original technical documentation. The unit is in good condition and fully functional after disassembly. Technical data (according to the nameplate): Manufacturer: Wittmann Kunststoffgeräte GmbH (Vienna, Austria) Model / Type: W822-1264 Article number: 8Q00001264 Year of manufacture: 2015 Payload: 15 kg Travel distances / stroke (X / Y / Z): X-axis (ejection stroke): 550 mm Y-axis (vertical stroke): 1200 mm Z-axis (lateral stroke / main axis): 2500 mm Supply voltage: 360V – 400V (50/60 Hz, 3PH/N/PE) Connected load: 1.9 kVA Weight: 275 kg Scope of supply & components: - Main unit / linear robot Wittmann W822-1264 - Pneumatic / gripper head with C-axis / swivel function and pneumatic valve blocks (SMC). - Including energy chains / drag chains for organized cable and hose routing. - Control system & operating unit - Original Wittmann Teachbox R8 / touch-screen handheld device with protective housing. - Additional handheld unit with emergency stop switch and function buttons. - External button boxes / control elements (including EMERGENCY STOP, quality control part, etc.). Kdedpozu Rzfjfx Ah Eot - Complete cabling, oil cooler control lines, Harting multi-pin connectors, and pneumatic hoses. - Original folder "Wittmann Technical Documentation" (including circuit diagrams, operating manual, and documentation). Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit our website.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: fe63b5ea, Year of construction: 2022, Markforged Onyx Pro 3D Printer (2022) – incl. accessories – excellent condition For sale is a Markforged Onyx Pro (Desktop Series), delivered in August 2022, in perfect technical condition and with very little usage. The current new price from Markforged is approximately €12,538 including the service package. Here you get a well-maintained device with complete accessories at a significantly reduced price. Technical Specifications - Printing process: FFF with Continuous Fiber Reinforcement (CFF) - Plastic materials: Onyx, PLA - Fiber: Glass fiber (continuous fiber reinforcement) - Layer thicknesses: 0.1 / 0.125 / 0.2 mm - Build volume: 320 × 152 × 154 mm - Eiger software (cloud-based) - Serial number available Kdedpfx Ajyh Hikoh Eot Ideal for functional components, fixtures, prototypes, and small series production in industrial environments. Scope of Delivery - Markforged Onyx Pro 3D printer - Dry box for material storage - Build platform - Accessory set: - 3× FFF plastic replacement nozzles - 3× CFF fiber replacement nozzles - 2 original sealed filament spools included - Original invoice from Mark3D GmbH - Professional initial installation was carried out by Mark3D Service Status - The original 3-year service plan was valid until 30.08.2025 and is now expired. - There is currently no active service contract. Condition - Very well maintained - Minimal usage - Fully functional Viewing and functional test available by appointment. Asking price €8,490 negotiable (net) Serious basis for negotiation. Significant savings compared to current new price. Other - Sale preferably to commercial buyers - Collection preferred; shipping available by arrangement All information has been provided to the best of our knowledge and belief. Subject to changes, errors, and prior sale.

Condition: used, Year of construction: 2021, The Smipack DV150 is a fully automatic monobloc overlap shrink wrapper with an inline infeed conveyor. It packs products like glass/PET bottles, cans, jars, and boxes at speeds up to 25 packs per minute using a single film reel system. [1, 2, 3, 4] Key Features Operation Modes: Works with film-only, or with pad/tray configurations depending on exact model variations (like ALX-T or ALX-P). Infeed System: Multi-row inline infeed with an electromechanical oscillating sorter to align products. Film Handling: Single film reel design with optional printed film centering devices. Shrink Tunnel: Built with an efficient double-chamber shrinking setup. [1, 2, 3, 4, 5, 6] Technical Specifications Max Output: Up to 25 packs per minute (ppm) Kjdpfx Ajzp A Uash Esdt Max Product Height: 380 mm Max Reel Size: 650 x Ø 400 mm Working Pressure: 6 Bar Machine Weight: Approx. 1,682 kg ed linking conveyor into a high-performance double-chamber tunnel for final heat shrinking. Standard Built-In Features Pneumatic Reel Locking: Uses a dedicated reel chuck with convenient built-in rollers to streamline heavy roll replacements. Safety & Control: Equipped with sliding protection doors featuring a deceleration device, manual reel sealers, and a metric-graduation centering system. Sensor Grid: Features a complete array of photocells monitoring product presence, infeed obstruction, film wrapping, and tunnel outlet accumulation. Are you interested in reading about the FLXMOD® control system details, or do you need a list of available optionals like the printed-film centering device? AI responses may include mistakes. Learn more Year of construction: 2019 & 2021 Max speed: 72000 Current size (ml): 3×2 Container material: Can, Glass, Pet Max. container: height 170 mm Packaging Type: Film Number of lanes: 8 Max reel size: Ø 500 mm Number of reels: 2 Automatic Changeover: No Compatible Spare Parts: 6 months Dimensions: 17500x1800x2400 mm Power: 182 kW Compressed Air: 6 bar

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, Kdjdpeyi Ezkofx Ah Ejt - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: used, Year of construction: 2013, functionality: fully functional, total height: 2,322 mm, total width: 1,154 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 1,315 kg, usable tank capacity: 320 l, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, Equipment: type plate available, Due to the closure of our facility, we are offering our fully functional, double mixing system for sale. This system was used until recently in active production. It was primarily used for the manufacture of high-quality epoxy resin systems. Scope of the offer (package sale): 1x Vacuum double planetary mixer (consisting of two identical planetary mixers) 4x Mixing vessels (compatible with the system) 1x Dispensing device Technical data: Manufacturer: Herbst Maschinenbau Model: HRV-S400DP Machine type: Vacuum double planetary mixer Last application: Production of epoxy resin systems Container volume: 320 l depending on the material / 400 l container total volume Drive power / connection values: see TDS in the appendix Condition & History: Used, fully functional, shows typical signs of wear and tear due to age and use. Processing, inspection & dismantling: Possible on short notice after prior arrangement. Availability: Immediately. Dismantling & removal: To be carried out independently by the buyer after prior consultation on site. Additional documents: Operating manual If you are interested or have any questions, please do not hesitate to contact us! Kedpfx Aszv Rqpsh Esdt

Condition: like new (used), Year of construction: 2026, functionality: fully functional, We offer you: CNC turning and milling center with robotic automation Manufacturer: DMG MORI Type: CLX 450 TC Year of construction: 2026 Control system: Celos X with Siemens Sinumerik One Technical data: Max. turning diameter: 400 mm Kodpfx Ajz A Ay Tsh Eodt Turning length: 1100 mm Bar capacity: max. 65 mm Travel paths: X-axis travel: 276 mm Z1-axis travel: 755 mm Z3-axis travel: 775 mm Y-axis travel: +/- 100 mm B-axis travel: +/- 120° Main spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Counter spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Milling spindle: Speed: 0 – 12,000 rpm Drive power: 8.8/10.5 kW Tool interface: HSK-T 63 Tool changer: 60 positions Max. torque: 73/90 Nm Internal clamping device: Ø 67 mm Operating hours: approx. 1,130 h Spindle hours: approx. 280 h Technical features & accessories: - Absolute, direct linear scales in the X and Y axes - Double-circuit filter - Counter spindle ISM 65, A2-8, C-axis and hydraulic spindle brake - Hinged belt chip conveyor, incl. coolant tank - Chuck flushing device on the outside for the main and counter spindle - Coolant supply through the counter spindle - Coolant spray gun - Screen cleaning for the safety shield - Electronic handwheel (if available) - Alternating speed - Signal light, 4-color - Automatic work area door, electric - Electrical interface Robo2Go - Workpiece measuring probe, manufacturer Renishaw RMP40 (if available) - Tool measuring device, manufacturer Renishaw RP1 (if available) - Function for drill breakage detection for Renishaw RP1 - Linear scale for Z1-axis - Differential pressure monitoring 2.0 on the main and counter spindle - Tailstock function for the counter spindle, incl. foot switch - Coolant system 8/40 bar, consisting of: - Coolant tank 600 l - Pump pressure variable 8 – 40 bar - Belt filter system - Lifting pump with level monitoring - Mechanical oil mist separator - Protection Package - Technology cycle with dialogue-guided programming - Technology cycle for parting off the workpiece - 2x 3-jaw chuck, manufacturer Schunk ROTA THW3 265-81 - Loading and unloading system Robo2Go, consisting of: - Module 35 kg - Drawer storage incl. additional drawer - Accessories on request Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and specifications, as well as prior sale, are reserved!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, overall weight: 1,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Kdodpfszza U Usx Ah Eet Number of rollers: 3 Number of driven rollers: 2 Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of top roller: 140 mm Diameter of bottom rollers: 140 mm MACHINE DETAILS Drive: Hydraulic Control: Conventional Power: 3 kW Dimensions & Weight Dimensions (L x W x H): 2,900 x 900 x 1,400 mm Unladen weight: 1,200 kg Transport packages: 1 EQUIPMENT CE marking

Condition: good (used), Year of construction: 1981, Surface grinding machine, manufacturer ELB, type: SWBE 010 ND, year of manufacture 1981. Electromagnetic chuck: 1000 mm x 500 mm Grinding area: Length 1000 mm, width 550 mm, height 400 mm Grinding wheel: 500 mm x 50 mm Kdsdsz Dv Exopfx Ah Eot Truing device Paper band filter Wet grinding system Electrical diagrams Space requirements: 4,000 mm x 3,000 mm, height 2,600 mm, weight approx. 3,500 kg.

Condition: excellent (used), Year of construction: 2022, operating hours: 3,600 h, functionality: fully functional, Description: Like-new welding cell including bolt-setting equipment with only 3600 operating hours, consisting of: Robot Qirox QRC 350, QC2 control system including connection cable, programming handheld device, gas nozzle sensor, arc welding search, point editor, QWP, QTI, Manax, hard drive, center-based circular programming Base stand Welding machine Qineo Next 452 Motion, wire feeder, welding torch, torch testing gauge, hose package, mechanical cleaning, 1 light curtain, start pre-selection, safety grid in the insertion area, service door with limit switch protection 1 manipulator QR-WP-TC 2.5 KN for components up to Ø 800 mm, plate distance 2000 mm and a load capacity of 250 kg. 1 extraction hood including hose lines without filter unit 1 Bolte bolt-setting device complete Automatic changeover system between bolt-setting head and welding torch Documentation, manufacturer's declaration Accessories: Functional guarantee. Services available upon request. Delivery date: possible in the short term. Subject to prior sale. The system can be inspected under power near Siegen. Special price if dismantled by the end of September 2026! Kodpfxjzvm Anj Ah Eodt

Condition: used, Year of construction: 2008, functionality: unexamined, overall weight: 1,270 kg, load capacity: 210 kg, arm reach: 2,650 mm, pivoting range: 360 °, controller manufacturer: FANUC, controller model: R-J3iB, teach pendant manufacturer: FANUC, teach pendant model: A05B-2452-C154 (abgebildet), input voltage: 380 V, type of input current: three-phase, repeat accuracy: 0.3 mm, A total of 7 FANUC R-2000iA/210F heavy-duty industrial robots are for sale. Available years/months: - 2 units: 08/2006 - 1 unit: 06/2007 - 3 units: 02/2008 - 1 unit: 03/2008 Individual sales are possible. The stated price applies net per unit, EXW Kirkel. For the purchase of multiple units, we offer an additional package discount upon agreement. Technical data: - Design: 6-axis articulated arm robot, floor mounting - Maximum payload at the wrist: 210 kg - Reach: 2,650 mm - Repeatability: ±0.3 mm - Mechanical weight of the robot: 1,270 kg - Axis speeds J1–J6: 95 / 90 / 95 / 120 / 120 / 190 °/s - Protection rating: Wrist and J3 arm IP67, other robot parts IP54 - Controller: FANUC SYSTEM R-J3iB - Controller power supply: 380–415 / 440–500 V AC, 3-phase, 50/60 Hz, 12 kVA - Weight of the FANUC control cabinet: approx. 180 kg - Teach pendant / handheld device included Scope of supply as shown in the images or upon agreement: - FANUC R-2000iA/210F robot arm with base - FANUC R-J3iB controller - FANUC teach pendant - Connection cables - Bosch Rexroth control cabinet with PSB6000 component shown in the photo for the pictured package The photos show an example unit from 02/2008 (robot type A05B-1324-B215). Equipment, nameplates and scope of supply may vary per unit and will be confirmed before the sale. Condition: used, with visible signs of wear and tear as well as paint damage due to age and use. The robots were functional until the time of dismantling. No further functional testing was carried out after dismantling. Therefore, the functionality is indicated as unverified for precautionary reasons. Operating hours are not documented. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and upon prior agreement. The transport costs depend on the destination and scope. Kodpfxozzr I To Ah Eedt Sale subject to prior sale.