Used Okuma Mc 60 Vae for sale (194)

Condition: used, Year of construction: 2011, machine/vehicle number: 149002, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, controller manufacturer: OSP, controller model: P200, table width: 500 mm, table length: 500 mm, The Okuma MB 5000H 4-axis machine was produced in 2011. It features a robust horizontal machining center design with a 500 x 500 mm pallet, capable of handling a maximum load of 500 kg. The spindle supports speeds from 50 to 15,000 min-¹ with an SK40 taper for increased versatility. Additional features include a chip conveyor, a shower system, and provision for a Renishaw probe. If you're looking for high-quality milling capabilities, consider the Okuma MB 5000H machine we have for sale. Ijdpfxex I Nwns Affjik

Condition: excellent (used), Year of construction: 2014, operating hours: 2,050 h, functionality: fully functional, CNC Turning and Milling Center Okuma Multus U4000 2SW 1500 Control: OSP-P 300S-H Year of manufacture: 2014 Spindle hours: 2,050 h Iijdpfxox I D Ube Affok Travels: X-axis: 695 mm Y-axis with stroke: +150 / -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Tool holder: HSK 63 Total number of tool stations: 40 Equipment: XA and YA axes with direct absolute measuring system (Okuma ABSO-Scale) In-process measuring with Renishaw probe for X/Z axis Measuring in Y-axis, including inclined-axis measurement mode Kitagawa B215A11 max. 2,800 rpm Kitagawa B210A8 max. 4,200 rpm Hollow clamping cylinder Kitagawa F 2596-H01 Ø96 mm One-Touch IGF Multi-function tool software Harmonic spindle speed oscillation Simultaneous 5-axis machining software package Chip conveyor Coolant tank with high-pressure pump 70 bar

Condition: used, Year of construction: 2001, functionality: fully functional, We offer this used Okuma LB 400-M CNC lathe, year of manufacture 2001. Iiodpfx Afex Ivgvjfek Manufacturer: Okuma Model: LB 400-M Year of manufacture: 2001 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1990, operating hours: 9,200 h, functionality: fully functional, turning diameter over cross slide: 490 mm, turning length: 850 mm, turning diameter: 700 mm, spindle bore: 80 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 330 mm, spindle motor power: 30 W, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,620 mm, total length: 3,995 mm, total width: 2,620 mm, Equipment: documentation/manual, Tailstock Chip conveyor Iiodpfx Ajvga Nysffok Tool Control Okuma 5020L Hydraulic chuck Autoblock 500 mm

Year of construction: 2008, condition: used, Manufacturer : OKUMA Model: LB3000EX-MYT Voltage: 380V Phase: 3P (3-Phase) Isdpfx Afjuiq N Rofsik Frequency: 50Hz Average Capacity: 35.5 kVA Full Load: 55 A Max Motor Power Consumption: 215 A Interrupt Capacity: 65 kA Diagram Number: W5201-139-756 Find more here - Contact us at -

Condition: good (used), Year of construction: 2012, Datasheet: Travels: Turning length: 1,000 mm Turning diameter: 360 mm X-axis: 260 mm Z-axis: 1,000 mm C-axis: 0.001 degrees Spindle machining diameter: 410 mm Swing over bed: 580 mm Main spindle: Cross section: 80 mm Spindle drive: 22 kW Spindle speed: 5,000 rpm Torque: 427 Nm Weight and dimensions: 6,000 kg LxWxH: 3,000x1,800x2,3000 mm Iodsq Dpuzepfx Affsik Touchsetter NC tailstock 12-position turret with driven tools Kitagawa B210 chuck Mayfran chip conveyor 8 bar coolant pump

Condition: excellent (used), functionality: fully functional, CNC lathe OKUMA LR 15 TECHNICAL DATA: Turning diameter over bed max. 450 mm Turning diameter over cross slide max. 240 mm OKUMA OSP5000L-G control Speed range 75 – 4,200 rpm Spindle bore 62 mm Isdpfev Dgibjx Affsik 2 turrets: - No. 1 (10 places) Z 520 mm X 195 mm - No. 2 (8 places) Z 520 mm X 125 mm Driven tools Operating instructions Machine weight approx. 5,000 kg We believe the machine is in very good condition and can be inspected under power by appointment. Loading included. We will help you organize the transport.

Condition: used, Year of construction: 2006, operating hours: 4,382 h, functionality: fully functional, machine/vehicle number: 127611, turning diameter over cross slide: 340 mm, turning length: 480 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 1,500 W, Equipment: rotational speed infinitely variable, EQUIPMENT - Hydraulic tailstock - Bar feeder 1000 mm TECHNICAL DETAILS Swing diameter over bed: 530 mm Swing diameter over longitudinal slide: 530 mm Swing diameter over cross slide: 410 mm Turning length: 480 mm Turning diameter: 340 mm Spindle speed: 4,500 rpm Spindle Spindle nose type: JIS A2-6 Taper bore: Ø70 (2.75") x 1/10 mm Spindle bore: 62 mm Spindle speed range: 38 - 4,500 rpm Longitudinal slide (Z-axis) Travel: 500 mm Feed rate: 0.001 - 1,000 mm/rev Rapid traverse: 25,000 mm/min Iiodpfx Afexl Udrefek Cross slide (X-axis) Travel: 280 mm [70 + 210] Feed rate: 0.001 - 1,000 mm/rev Rapid traverse: 20,000 mm/min Turret Type: V12 Number of tools: 12 (turning or driven tools) Tool size (external turning tools): 25 x 25 mm Tool size (internal turning tools): 40 mm C-axis Control angle: 360° (increment: 0.001°) Rapid traverse: 200°/min Tailstock & Motors Tailstock quill diameter: 90 mm Tailstock quill travel: 120 mm Main spindle motor: 15/11 kW (20 min / continuous duty) Longitudinal feed motor (Z-axis): 6 kW Cross feed motor (X-axis): 4 kW MACHINE DETAILS Machine height: 2,200 mm Footprint: 2,200 x 1,720 mm Weight: 5,200 kg EQUIPMENT - Hydraulic tailstock - Bar feeder 1000 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Isdpfxju U E Avo Affoik Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: used, Year of construction: 2000, functionality: fully functional, OKUMA LU 15M-1000 MM WITH BARFEEDER Maximum Turning Diameter: approx. 360 mm Maximum Turning Length (Z-axis travel): approx. 1000 mm Spindle Speed: up to 4,500 rpm X-axis Travel: approx. 260 mm (≈ 10.24″) Z-axis Travel: approx. 640 mm (≈ 25.2″) Power Requirement: approx. 30 kW Machine Weight: approx. 4.8 tons Iijdpfsxur Nwex Affsk Turrets: Dual turrets (example: upper turret 12 positions, lower turret 8 positions) Live Tooling (M-function): Yes, on the M version

Condition: good (used), Year of construction: 2021, functionality: fully functional, Description: The machine is in good technical condition and can be tested by prior arrangement. Accessories include: tool holders, tailstock centers, 7 driven tools, tool probe. Available for delivery – 03-04/2026. Iedpfx Afjx H Ifbofjik

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 5585 mm Measurements depth 3080 mm Measurements height 3280 mm Machine weight 21000 kg Control Unit Model OSP-E100M Brand OKUMA Main Drive Spindle speed range 20000 rpm Number of axis 4 Movement Iijdpfx Aox D Ib Ijffok X-Axis Movement 700 mm Y-Axis Movement 900 mm Z-Axis Movement 980 mm Media Internal cooling Yes This Okuma MA-500HA was manufactured in 2004. A robust horizontal machining centre, it features a spacious X-axis travel of 700mm, Y-axis of 900mm, and Z-axis of 980mm. It includes a high-speed spindle capable of 20000 RPM and an efficient through coolant pump. For more information about this horizontal machining centre, please reach out to us. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand OKUMA Model OSP-P200L Main Drive Spindle speed range 38–5000 Spindle bore 100 mm Isdpex D Rvhofx Affeik Number of axis 5 Movement X-Axis Movement 580 mm Y-Axis Movement ±80 mm Z-Axis Movement 935 mm W-Axis Movement 1000 mm Workpiece Workpiece drm over bed 630 mm This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turn-mill center with a swing over bed of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, toolsetter, and a tool magazine holding 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking to get high-quality turning capabilities consider the Okuma Multus B300-W machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2018, Movement X-Axis Movement 1500 mm Y-Axis Movement 660 mm Z-Axis Movement 660 mm This 3-axis Okuma MB-66VB was manufactured in 2018 and features a robust vertical machining center design. It offers a large working area of 660 × 1530 mm, with X, Y, and Z travels of 1500 mm, 660 mm, and 660 mm respectively. The machine supports a load capacity of 1500 kg and achieves rapid traverse feed rates up to 40 m/min. Consider the opportunity to buy this Okuma MB-66VB vertical machining center. Contact us for more information about this machine. Application Types Milling Iijdpox D Sg Usfx Affek

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of spindles 1 Spindle speed range 4000 Spindle motor power 22/15 kW Tool taper VDI 40 Number of axis 2 Movement Iiedpfx Asx D Ng Eeffok X-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm 280 mm Workpiece X 320 mm Tools Number of index 12 This Okuma LVT 300 was manufactured in 2005. A robust vertical turning machine featuring a max. turning diameter of 280 mm and a swing diameter of 320 mm. It offers a rapid traverse rate of 60 m/min on the X-axis and 30 m/min on the Z-axis, with a turning speed range up to 4000 U/min. Ideal for efficient, precise operations, the machine includes 12 tool positions. A great opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2004, Control Unit Brand OKUMA Model OSP-E100L Main Drive Number of axis 3 This 3-axis Okuma VTurn LVT300-M was manufactured in 2004. It features a vertical turning machine design, complete with a load and unload table. Ideal for those looking to get high-quality turning capabilities, consider the Okuma VTurn LVT300-M machine we have for sale. Contact us for more information. Iijdpfx Asx D Npmoffjk Application Types Turning

Condition: ready for operation (used), Year of construction: 2003, Control Unit Interface HSK 63 Brand OKUMA Model OSP-100L Main Drive Number of axis 5 Tools Number of index 40 Max tool length 1500 mm Additional Equipment Autodoor This 5-axis Okuma MacTurn 350 was manufactured in 2003. It features an HSK 63 tooling system and can accommodate up to 40 tools. The machine includes an autodoor and supports a turning length of 1500 mm. Consider the opportunity to buy this Okuma MacTurn 350 Turn-mill centre machine. Contact us for more information. Application Types Turning Iodpfxsx D Ipxo Affsik

Year of construction: 1997, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP7000L Iisdpfx Afsx D Rwxofek Main Drive Number of axis 4 This 4-axis Okuma LU2-M was manufactured in 1997. It features a turning length of 1500 mm, ideal for horizontal turning machine applications. Consider the opportunity to buy this Okuma LU2-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand OKUMA Main Drive Iiodpfx Afsx D Smnefek Spindle speed range 8000 rpm Tool taper BT40 Number of axis 4 Movement X-Axis Movement 560 Y-Axis Movement 560 Z-Axis Movement 600 Additional Equipment Tool change gearbox has a defect This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2008. It offers robust construction and precision for demanding machining tasks. If you are looking to get high-quality milling capabilities, consider the Okuma MA-400HA machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2022, operating hours: 1,790 h, condition: ready for operation (used), Main Drive Spindle speed range 50 - 6000 Spindle motor power 11.5 kW Iodpfxox D D H Hj Affsik Spindle bore 62 mm Number of axis 2 Additional Equipment Automation: Samsys short bar loader Extra Features: High-pressure pump & tank, high-pressure seal kit, workpiece removal arm, tool height correction in the Y-axis, coolant tank and pumps, detachable wired handwheel, tool monitoring, programmable face printing, and Hi-Cut Pro for driven tools two BMT55 revolvers with 16 stations each This Okuma LT2000-2T1MY was manufactured in 2022. It features two 22KW spindles, a 32-station BMT55 turret, and an OSP-P300LA control system with OSP and ECO suites. It includes a Samsys short bar loader, high-pressure pump, and tank. The machine offers 4-axis machining capabilities with Y-axis in the upper turret and is equipped with a 15" color LCD TFT multi-touch screen. If you are looking to get high-quality turning capabilities consider the Okuma LT2000-2T1MY machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,771 h, Control Unit Brand OKUMA Model OSP-P300SA Main Drive Spindle speed range 38-3800 Tool taper HSK 63 Number of axis 4 Isdpfx Afox D Hlljfoik Movement Y-Axis Movement 160 mm B-Axis Movement 0.001° Tools Slots in storage 40 Media Chip conveyor Yes Additional Equipment HI-Cut Pro high-speed control This 4-axis Okuma Multus B300 II Turn Mill Centre was manufactured in 2022. It features a control unit OKUMA OSP-P300SA, a main spindle with a three-jaw chuck diameter of 304mm, and a counter spindle with a C-axis. The milling spindle supports up to 6000 rpm with a torque of 65.7 Nm. If you are looking to get high-quality milling and turning capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of axis 2 Ijdsx D Dqxspfx Affsik This Okuma LVT 300 was manufactured in 2005. It features a stable, precise design with recent upgrades including a new SMW clamping cylinder and chuck in 2020, and a completely overhauled Z-axis with new guideways and spindle. Additional features include an EWAB conveyor for automated parts logistics and extensive tool holders. Consider the opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2002, Movement X-Axis Movement XA: 475 mm, XB: 160 mm Y-Axis Movement 160 mm Z-Axis Movement ZA: 1170 mm, ZB: 1155 mm B-Axis Movement Indexing angle: 1 degree C-Axis Movement 360 Workpiece Workpiece drm 550 mm Workpiece X 1025 mm This 5-axis Okuma Macturn 250W lathe was manufactured in 2002. It features a swing over saddle of ø550 mm, a maximum machining diameter of ø550 mm, and a maximum work length of 1025 mm. The machine includes a 360-degree C-axis and a B-axis indexing angle of 1 degree. A great opportunity to buy this Okuma Macturn 250W lathe. Reach out for further details regarding this lathe. Application Types Iisdox D Hqhjpfx Affek Turning

Condition: ready for operation (used), Year of construction: 2003, operating hours: 18,951 h, Control Unit Brand OKUMA Model OSP-U100L Tools Number of station 12 Media Chip conveyor Yes Iedpfxsx D Hikj Affjik Additional Equipment Coolant Pump: Reinforced coolant pump for pressures starting at 8 bar Coolant Tank: 400 liters Workholding: Full clamping cylinder Chucking: Chuck blow-out with compressed air Other: Automatic shut-off at the end of a batch This Okuma LVT 300-M 2003 was manufactured in 2003. It features a travel range of 280mm, 12 tool stations, and a reinforced coolant pump supporting pressures from 8 bar. The machine includes a 400-liter coolant tank and a full clamping cylinder for effective workholding. Consider the opportunity to buy this Okuma 2003 vertical turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2001, Main Drive Number of axis 4 Movement X-Axis Movement 560 mm Y-Axis Movement 610 mm Z-Axis Movement 560 mm This 4-axis Okuma MA-40HA horizontal machining centre was manufactured in 2001. It features a robust OSP 100U control system and a generous automatic tool changer with 60 magazine slots (ISO40). Ideal for complex machining tasks with its 560 mm travel in X, Y, and Z axes. Contact us for more information about this machine. Iiedpfx Aox D E E Doffek Application Types Milling