Used Okuma Ma 60 Hb for sale (235)

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Njdpovta Rksfx Ahvskw Bjsvkhv0lno We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: good (used), Year of construction: 2005, The machine has been maintained annually under a service contract with Okuma. Okuma Mac Turn 550 W Year of manufacture: 2005 Nsdpfx Ahsyt Nvtevekw Control: OSP-E 100 L Max. turning diameter: 720 mm Distance between tailstock tip and spindle nose: 2,505 mm Y axis travel: 250 mm Main spindle speed: up to 3,500 rpm Spindle motor power: 30 kW Lower turret with 12 stations Milling spindle with infinitely variable B axis 80-position tool magazine HSK 100 tool holder 3-jaw chuck, diameter: 315 mm In 2023, the cable carrier for the W axis including all hoses was replaced. In October 2024, the linear guides for X/Y/Z axes were renewed. All work was carried out by Okuma. The machine was cleaned. Covers and sheet metal parts were dismantled. 8th axis dismantled. Travelling column dismantled and removed from the machine. ATC dismantled and removed from the machine. All linear guides removed. Mating surfaces of the ZA axis cleaned. New ZA axis linear guide incl. carriages installed and secured at specified torque. New ZA axis ballscrew incl. bearings installed. Base plate for the travelling column installed and secured at specified torque, respectively fastened to carriages. Lubrication lines connected. ATC including auxiliary components reinstalled and connected. New YA and XA linear guides installed and tightened to specification. New YA axis ballscrew with bearings installed. Travelling column installed and lubrication lines connected. XA base plate installed and aligned. 8th axis installed and aligned. H1 turret mounted - Install drive motor for 8th axis - Assemble 8th axis and new H1, set geometry - Function test for 8th axis and H1 - Run-in program for B axis approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various covers - Install chuck - Adjust zero points - Check tool change

Condition: good (used), Year of construction: 2004, CNC turning and milling center with 9 CNC axes, Okuma Mac Turn 350 W, year of manufacture 2004, OSP-E 100L, 80 WW fac, HSK 63 holder, stepless B-axis as milling spindle, lower 12-station turret with live tooling, Interlite compact filter system 900 l, extraction, spindle hours approx. 18,300 h, chip conveyor, tool changer gripper arm completely renewed, high-pressure cooling, tool measuring arm, tool changer overhauled, main spindle Kitagawa B - 210, sub spindle Kitagawa B - 208. Nksdeyt H U Topfx Ahvjw

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe (2 machine cell) Model: LVT 400 Nkodpfjxwy S Ejx Ahvew Control: OKUMA OSP 1000L Year: 2006 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 6,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 650 mm, table length: 6,300 mm, table width: 2,500 mm, spindle speed (min.): 30 rpm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 3,500 m/min, rapid traverse Z-axis: 10,000 m/min, distance between stands: 3,050 mm, table load: 30,000 kg, overall weight: 59,000 kg, spindle nose: NT No.50, feed length W-axis: 1,300 mm, Okuma MCR-A5C gantry machining center (2013) with BT50 spindle, 6,500 mm X-travel and 30 t table load. Machine has approx. 5,700 cutting hours and 6,900 spindle hours, suitable for heavy and precise machining of large workpieces. Nksdpox Tzyxefx Ahvow

Condition: ready for operation (used), Okuma DC-S1A DC Power Supply 4 Axes CZ-270C , serial no. according to photo ,used, normal signs of use, 100% functional Nedpfx Aei Ecanshvekw

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Nodpfxei Ecaye Ahvjkw

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A / 1911-1509-44-90, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Nsdpfx Aji Eca Djhvskw

Condition: ready for operation (used), Okuma DC Power Supply 6 Axes PCB with E4809-436-002-A, used, normal signs of use, 100% functional Nkjdpfxsi Ecakj Ahvow

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-019D, serial number as per photo, used, normal signs of wear, 100% functional Nkodpfx Ahoi Eca Isvjw

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-071, serial number as per photo, used, normal signs of wear, 100% functional Nkjdpfxsi Eca Ss Ahvew

Condition: used, Year of construction: 2000, max. turning diameter 580 mm turning length 1500 mm control OSP 7000 L greates pass round over bed 610 mm swing diameter over slide rest 580 mm turning speed range - main spindle 12 - 2.800 min/-1 spindle bearing diameter 150 mm spindle bore 110 mm spindle nose JIS A2-11 power capacity - main spindel 37 (30) kW C-Axis 0,001 ° x-axis 598 mm y-axis 230 mm z-axis 1.660 mm rapid traverse X / Y: 12.000 mm/min rapid traverse Z: 20.000 mm/min rapid traverse C: 100 min/-1 cutting feed speed X / Z / Y: 0,001 - 1.000 mm/U type H2 ATC number of toolpositions 2 (1x L-Tool / 1x M-Tool) pos. driven statition stufenlos / stepless Spindle speed - driven tool stations 40 - 3.000 min -1 tool shank height 25 mm Boring bar shank diameter 50 mm diameter of quill 120 mm quill stroke 170 mm taper of center MT 5 number of toolpositions 50 pos. tool taper MAS BT 50 max. tool diameter 170 mm max. tool length 350 mm max. tool weight 20 kg drive of magazin 3,2 kW total power requirement 53 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 6,0 x 3,2 x 3,0 m CNC - Turning- and MillingCenter Nsdexmaf Rjpfx Ahvekw OKUMA - MacTurn 50

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,204 h, functionality: fully functional, turning length: 1,025 mm, turning diameter: 530 mm, travel distance X-axis: 475 mm, travel distance Z-axis: 1,170 mm, quill stroke: 150 mm, controller model: Okuma OSP-E100L, TECHNICAL DETAILS Distance between centers: 1,000 mm Swing over bed: 550 mm Maximum machining diameter: 530 mm Maximum workpiece length: 1,025 mm Travels X-axis: 475 mm Y-axis: ±80 mm Z-axis: 1,170 mm C-axis: 360° (continuous) B-axis indexing angle: 1° Main spindle Spindle speed: 5,000 rpm Spindle nose: JIS A2-6 Taper bore diameter: 62 mm Bearing diameter: 100 mm Sub spindle Spindle speed: 6,000 rpm Spindle nose diameter: 140 mm Taper bore diameter: 43 mm Bearing diameter: 80 mm Milling spindle Speed range: 6,000 rpm Feed rates Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 26 m/min Rapid traverse Z-axis: 40 m/min Automatic Tool Changer (ATC) Number of tools: 84 Maximum tool length: 250 mm Maximum tool diameter: Ø120 mm (with adjacent stations empty) Maximum tool weight: 5 kg MACHINE DETAILS Control: Okuma OSP-U100L Dimensions (L x W x H): 3,820 × 2,645 × 2,900 mm Weight (without tool magazine): 12,500 kg Main switch-on hours: 20,204 h EQUIPMENT Automatic tool change system High-speed M-spindle with coolant supply 360° C-axis for continuous machining Robust B-axis with 1° indexing Precision sub spindle for second machining side Stable turret with ATC system Nedjxvzp Aopfx Ahvekw

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 0316, travel distance X-axis: 1,000 mm, Equipment: chip conveyor, Technical information - Okuma MC-600H General information Width: 4358 mm Depth: 12141 mm Height: 3310 mm Njdpfx Ahewaw S Dsvskw Machine weight: 17700 kg Brand: OKUMA Model: OSP 5020M Main drive Number of spindles: 1 Speed frequency of spindle: 5000 1/min Movement X-AXIS Movement: 1000 mm Y-AXIS Movement: 800 mm Z-AXIS Movement: 750 mm Tools Maximum weight: 25 kg Maximum tool diameter: ISO 50 MM Maximum tool length: 450 mm Media Main electrical connection: 380 V / 50 Hz / 3 P Power consumption: 43 kVA Swarf conveyor: Yes

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Travels X-axis: 598 mm Y-axis: 230 mm Z-axis: 1,660 mm Main spindle Speed range – main spindle: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis: 0.001° Feeds Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 min⁻¹ Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) Driven stations: infinitely variable Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Control: OSP 7000 L Space requirements & Weight Approx. footprint: 6.0 x 3.2 x 3.0 m Approx. machine weight: 18.5 t Electrical data Total connected load: 53 kVA Rated voltage: 400 V Number of phases: 3 P Frequency: 50 Hz EQUIPMENT Nkjdpfx Ahsxb Awfovow Chip conveyor Central coolant system High-pressure coolant Signal lamp Hydraulic unit Steady rest Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel 44 assorted tool holders

Condition: good (used), Year of construction: 2006, operating hours: 21,437 h, functionality: fully functional, machine/vehicle number: 122574, Controller: OSP P200 L  Remarkably few spindle hours.    Max. turning diameter ø 720mm  2.000 mm distance between spindles  Spindle speed 3.500 rpm  Nsdeurfz Ijpfx Ahvokw Spindle power 30 kW  Sub-spindle; spindle speed 3.800 rpm  Spindle power 22 kW  Spindle speed aangedr. Ger 5.000 rpm  Spindle power aangedr. Ger. 22 kW  Number ger. Under 12 Turret  Upper mill spindle HSK100 ATC 32 HSK 100   Y-axis 250 (+125 / 1-125) mm  Floor space: 6150 x 3073  

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0014, turning length: 1,500 mm, turning diameter over cross slide: 610 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel Distances X-axis travel: 598 mm Y-axis travel: 230 mm Z-axis travel: 1,660 mm C-axis: 0.001 Turning Length: 1,500 mm Swing diameter over cross slide: 610 mm Swing diameter: 580 mm Spindle Spindle motor power: 30,000 W Spindle speed (min.): 14 rpm Spindle speed (max.): 3,200 rpm Spindle bore: 90 mm Spindle bearing diameter: 130 mm Spindle nose: JIS A2-11 Rapid Traverse Rapid traverse (Z-axis): 20 m/min Rapid traverse (X/Y): 12,000 mm/min Rapid traverse (C): 100 min^-1 Cutting feed rate X/Z/Y: 0.001 - 1,000 mm/rev Tools Tool magazine positions: 32 pos. Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Turret type: H2 ATC Tool stations: 2 (1x L-Tool / 1x M-Tool) Driven tool stations: stepless Spindle speed – driven tool stations: 40 - 3,000 rpm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Centre taper: MT 5 MACHINE DETAILS CNC Control: OSP 7000L Total power requirement: 53 kVA Dimensions & Weight Nedpfx Aexqyikehvekw Dimensions (L x W x H): 5.3 x 3.2 x 3.0 m Machine weight: 18,500 kg EQUIPMENT Chip conveyor

Condition: excellent (used), Year of construction: 2019, operating hours: 2,121 h, functionality: fully functional, machine/vehicle number: 0712-101296, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 32, TECHNICAL DETAILS Travel X / Y / Z: 1,050 x 560 x 460 mm Control: OSP-P300MA-e Spindle motor: 22/18.5 kW (10 min./cont.) Spindle taper: NT40 (ø70 mm) Spindle speed: 50 to 15,000 rpm Max. torque: 199 N·m Spindle cooling: oil regulation Travel speeds Rapid feed X-/Y-axis: 40 m/min Rapid feed Z-axis: 32 m/min Cutting feed: max. 32 m/min Coolant supply Tank capacity: 230 L (effective 120 L) Pump output: 0.25 kW Shower coolant supply: present Coolant through spindle: medium pressure 1.5 MPa, 20 L/min Tool changer ATC specification: MAS BT40 + JIS special pull stud Tool capacity: 32 tools Tool release package: present ATC air blower: present Tool breakage monitoring (OTS Renishaw): present Tool measuring (OMP60 Renishaw): present Nedpjwnpy Njfx Ahvskw Chip management Chip tray: present Chip conveyor (screw type): 0.1 kW × 2 units Air blower for chips: nozzle system Chip conveyor Mayfran H-type: present Preparation for chip conveyor M-A type: present Control CNC: OSP-P300MA-e Display: 15" color display, XGA 3D-E kit with special functions: incl. spiral milling, synchronized tapping II, free bevel angle, travel limitation, 3D simulation, tool management, cycle time reduction, automatic shut-off, and much more. IGF Advance-E expansion instead of standard 3D-E kit Machine protection & safety Total enclosure: CE compliant Status indicator light: 2-color (blue: end of operation, yellow: alarm) CE transformer & power supply adapted to local standards IEC conformity: present Other equipment Foundation washers: present Tool wear compensation: present TAS-S and TAS-C: present Operating hours: 2,121 h EQUIPMENT - ATC air blower - Tool release package - Chip tray - Shower coolant supply - Chip conveyor prepared (M-A type) - Mayfran H-type chip conveyor - Coil-type chip conveyor - Nozzle system for chip removal - Renishaw OTS tool breakage monitoring - Renishaw OMP60 probe - Smart Interface with API and virus protection - Total enclosure with CE - Status display with LED - Foundation washers - IGF Advance-E kit - 3D-E kit with cycle time reduction, monitoring, tool management - OSP-P300MA-e control with 15" color display - Operating hours indicator - Power supply CE compliant

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8328, Offer Number: M08L/8328 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Type: RH60 Nedpfxowi S Aio Ahvekw Constr. year: 1988 diameter range: 8,5 mm number of dies: 2 number of stations: 4 cutting length: 55 mm shaft length under head: 55 mm output - pieces/min: 200 press power: 30 to Location: In our warehouse

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: M08L/8327, Offer Number: M08L/8327 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Type: RH60 Constr. year: 1989 diameter range: 3-8,5 mm number of dies: 2 number of stations: 4 cutting length: 55 mm Njdpswi S Apefx Ahvskw shaft length under head: 55 mm output - pieces/min: 200 press power: 30 to Location: In our warehouse

Condition: used, OKUMA LB 10 II M is a CNC turning lathe, engineered for precision, high accuracy and reliability. Capacities: swing over cross‑slide 340 mm, over bed 480 mm, max turning Ø 170 mm, spindle hole 51 mm, max length 300 mm, bar passage 42 mm; travels Z350/X150 mm; rapid Z20/X15 m/min. Turret 12 pos., 12 driven tools; C‑axis res. 0.01°; spindle 50–6000 t/min; voltage 3x400 V 50 Hz; weight ~3400 kg; footprint 2000×1640×1780 mm. Accessories: lamp, coolant system, bar feeder, chip conveyor. Enables tight tolerances; suitable for automotive, aerospace, medical, watchmaking and precision machine tool applications. Nedpfeyxnx Eox Ahvjkw

Condition: used, OKUMA LB 200 M is a CNC turning lathe for high‑precision machining, accuracy and reliable operation. Capacities: turning Ø over cross‑slide 420 mm; swing over bed 530 mm; spindle hole 53 mm; max Ø 300 mm; travels Z 335 mm, X 180 mm. Specs: rapid traverse X 25 m/min, Z 30 m/min; spindle speeds 50–6000 t/min; 3x400 V 50 Hz; total power 16 kVA; weight ≈3300 kg; dims 2035×1720×1700 mm. Equipment: 12‑position fixed‑tool turret; tailstock Morse 4, spindle stroke 80 mm, Ø 55 mm. Enables tight tolerances; typical sectors: automotive, aerospace, medical, machine building. Njdpfsyxnxxsx Ahvskw

Condition: used, OKUMA LB 2000 EX is a CNC turning lathe designed for precision, high accuracy and reliability. Capacities: spindle hole 62 mm; max turning length 300 mm; max turning diameter 430 mm; travels Z 350 mm, X 260 mm. Specs: rapid traverse Z 30 m/min, X 25 m/min; stepless spindle 50–6000 t/min; power 50 Hz 3x 400 V; weight ≈3250 kg; dimensions L1900×W1750×H1850 mm. Equipment: 12-position turret. Capable of tight tolerances; typical applications: automotive, aerospace, medical, watchmaking, machine tools. Nkodjyxnxfopfx Ahvow

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, CNC Lathe Okuma LU 3000 M2SC 1000 / Demonstration Machine Control: OSP-P300LA Year of manufacture: 2023 Spindle hours: approx. 50 h Internal machine no.: 29 Turning length: 1,000 mm Nksdpfxjyk Sf Sj Ahvow Turning diameter: 340 mm Spindle speed: 5 - 5,000 rpm Tooling: VDI 40 2 pcs. tool turrets A-turret: 12 tool stations / all stations driven B-turret: 8 tool stations Tailstock Chip conveyor 3-jaw chuck Kitagawa B210 Touchsetter T One Touch IGF Electronic handwheel on the control panel

Condition: excellent (used), Year of construction: 2014, CNC Lathe Okuma LU 3000 EX MY 2SC950 Control: OSP-P300 Year of manufacture: 2014 Internal machine no.: 27 Max. turning length: 950 mm Nodpfx Ahjyluviovjkw Max. turning diameter: 340 mm Max. swing diameter over cross slide: 380 mm Max. swing diameter over bed: 580 mm Max. spindle speed: 4,200 rpm Tool holder interface: BMT 2 pcs. tool turrets A turret: 12 tool positions (all driven) B turret: 8 tool positions Tailstock Chip conveyor Hydraulic power chuck B210/A8 Touch setter High-pressure coolant pump Enlarged coolant tank