Used Number for sale (28,137)

Condition: good (used), mileage: 511,584 km, power: 390 kW (530.25 HP), first registration: 01/2022, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 6,200 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, - Heated mirrors - CarPlay - Digital tachograph - Trip recorder (control unit) - Fixed - High roof - Hydraulic system - Alloy wheels - Manual - Auxiliary drive - Pump - Radio/cassette - Lane keeping assist - Fabric - Blind spot sensor - Xenon lamp - Auxiliary braking system Number of axles: 2, Configuration: 4x2, Tare weight: 8106 kg, Gross vehicle weight: 19000 kg, Total tank capacity: 720 liters, Saddle coupling height: 121 cm, Saddle coupling: Fixed, Number of locks: 1, Winch pulling capacity: 400 tons, Alloy wheels, Suspension type: Air suspension, Cabin type: High roof, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Stationary air conditioning, Parking heater, Electric windows, Electric mirrors, Radio/cassette, CarPlay, GPS navigation, Color: Multi-colored, Heated mirrors, Mirror camera, Lighting type: Xenon lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Blind spot sensor, Engine power: 390 kW (523 Hp), Fuel: Diesel, Euro: 6, Transmission type: Telligent, Transmission type: Mercedes Benz, Gears: 12, Auxiliary braking system, Retarder brand: Voith, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Gigaspace, durabright, hydr unit Transmission Transmission: MB, 12 gears, Automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 5 mm; Tire tread depth right: 7 mm Axle 2: Tire size: 315/80R22.5; Double tires; Tire tread depth left inside: 4 mm; Tire tread depth left outside: 4 mm; Tire tread depth right inside: 6 mm; Tire tread depth right outside: 4 mm Weights Tare weight: 8,106 kg Payload: 10,894 kg GVW: 19,000 kg Functional Pump: Yes Maintenance APK (Technical Inspection): valid until 11/2026 Condition Technical condition: good Optical condition: good Damage: none Tsdpfx Asz E Hh Tomrsc Number of keys: 2 Financial information Leasing price: €990 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of construction and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an inquiry via our website. Ask directly...

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA - track width 250mm - shaft width 350mm - shaft diameter 80mm - max blade diameter 400mm - blade bore diameter 80mm - max cutting height 150mm - table width with clearance 700mm - table length 1790mm from above: - pawls - pressure shaft, sliding - pawls - pressure shaft, smooth - shaft with saw blades - smooth pressure shaft, 2 pcs from below: - guide strip - sliding, smooth shaft - pawls - track feed table - roller width 500mm - number of rollers 3 pcs - overall dimensions of the feed table (length/width/height) 580x530x900mm outfeed table - roller width 500mm - number of rollers 6 pcs - overall dimensions of the outfeed table (length/width/height) 1210x535x900mm - central lubrication - stepless feed speed adjustment - main motor 37kW - dust extraction nozzle diameter 140mm - overall dimensions of the multi-blade saw (length/width/height) 2000x1450x2000mm - total weight approx. 3000kg Tedpfezww A Isx Amrjc ADVANTAGES – German production – large cutting height – feed and outfeed tables – used multi-blade saw, very good condition Net price: 46900 PLN Net price: 10910 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (the price may change in case of larger exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7556 Technical data: - min / max width of the workpiece 20 / 240mm - min / max height of the workpiece 8 / 160mm - number of spindles 4 1) horizontal lower 240mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) horizontal upper 240mm 7.5kW - all heads adjustable up/down, left/right Tsdpfxezu R R Hj Amroc - spindle diameter 40mm – from above: - 6 infeed, toothed rollers, including 2 double rollers - 2 outfeed, smooth, rubber rollers – from below: - side pressure before and after the roller in the lower bed - toothed, infeed roller, swivel in the lower bed before the first spindle - 2 pneumatic side pressure rollers - outfeed, metal, smooth roller - all rollers with pneumatic pressure - length of the infeed bed 2180mm - bed adjustable up/down - central lubrication - electric adjustment of the cutting depth - lifting motor 0.75kW - stepless speed adjustment of the feed rate on a frequency inverter 6-30m/min - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet + - diameters of the dust extraction nozzle 4x150mm - dimensions L/W/H 3750x1750x1800mm - weight 3300kg ADVANTAGES – with 4 heads – ideal for wet and dry wood – used machine, in perfect condition Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: used, Year of construction: 2006, total width: 4,210 mm, total height: 1,830 mm, Colour: Blue Empty weight: 3.500 kg Dimensions (LxBxH): 190 x 421 x 183 cm - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107707 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 4: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 5: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 6: - - Spindle type: Horizontal spindle - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - Max. planing width [mm]: 230 - Max. planing height [mm]: 120 - Feed table length [mm]: 1800 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 4 - System/software: Memory System - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 130 - Options: Automatic feeding system - Feed speed: Automatic - └ Min. feed speed [m/min]: 4 - └ Max. feed speed [m/min]: 30 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 78 - Fuse [A]: 80 - Power [kW]: 36.0 - Transport dimensions: 1900mm x 4210mm x 1830mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Tsdpfxjzl Tvao Amrjc Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 610 mm turning dia. over face-slide: 350 mm Tsdpfx Asu Ix I Usmroc swing diameter over bed: 610 mm centre distance: 1390 mm control: Fanuc 0i-Mate TC x-axis: plan: ca. 305 mm z-axis: längs: ca. 1350 mm revolution per minute: 22 - 2200 U/min feed:: X + Z-Achse: 5 / 10 m/min. spindle bore: Ø 70 mm tool turret - number of stations: 6 tailstock quill taper MT: MK5 tailstock quill stroke: 150 mm Weight approx.: 2,7 t total power requirement: 15 kW dimension machine xH: 3,7 x 1,7 x 1,7 m dimensions of hydaulic: 630 x 460 x 900 mm other features: -hydr. chuck TONFAU Ø 300mm -hydraulics -Coolant system -control panel -double foot switch accessories: -div. mold jaws -div. soft jaws -6 footrests *

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Tsdpfx Ameu Nc Riorjc Milling head SEMPUCO *

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,9 x 2,5 m dimensions electric cabinet LxWxH: Nr. 1: 1,95 x 0,4 x 1,95 m dimensions electric cabinet LxWxH: Nr. 2: 0,8 x 0,23 x 1,95 m Tsdpfxsvc An Ds Amrsc dimensions:: Abluftanlage: 1,4 x 0,7 x 0,55 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 69x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm Tjdju Ndbpjpfx Amrsc table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Cooling water recooler Hyfra The machine can be demonstrated under power. *

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Tjdpsu Nfibefx Amroc Machine is not functional and is on sale as is! *

Condition: used, Technical details: Tsdpsu Ic Ewofx Amrjc sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: used, Technical details: band width: 80 mm plate thickness: 1,5 mm number of rolls: 5 total power requirement: 1,2 kW weight of the machine ca.: 150 t space requirements approx. LxWxH: 1,1 x 0,7 x 1,4 m straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls Todou Ic E Rspfx Amrec - compressed air connection is not mounted i.D. *

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. Todpfeu Idnmjx Amrec *

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m Todpfxsvvtpxs Amrec The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: used, Year of construction: 2007, Technical details: turning diameter over bed: 762 mm turning length: 850 mm facing movement (x-axis): 287 mm longitudinal traverse (z-axis): 864 mm control: CNC Haas spindle passage: 76 mm Tsdpfxsvvt Emo Amrec revolution per minute: max. 3400 steples U/min tailstock taper ISO: Ø 290 tailstock quill stroke: ja mm tool turret - number of stations: 12 electrics - voltage/frequency: 360/ 400 V - 50-60 Hz V/Hz Weight approx.: 6,3 t transport measurements machine: ca. 3,4 x 2,1 x 2,4 m Equipment: 3-jaw power chuck KITAKAWA Ø 250 mm (without jaws) 4200 rpm. Operable via 2-position foot switch. Tool turret with powered tools available. Electric coolant system provided. Tool measuring system available. I.D. *

Condition: excellent (used), CATALOGUE NUMBER 8024 TECHNICAL DATA - roller width 640mm - max. thickness of workpiece 210mm Tsdpfxoztquvj Amrsc – from top to bottom: - pawls - toothed infeed roller, pulling - pressure roller - planing roller - pressure roller - smooth outfeed roller, pulling, metal - 2 adjustable sliding rollers at the bottom - motor approx. 5.5kW - manual table lifting - 2 feed speeds - diameter of dust extraction nozzle 130mm - dimensions L/W/H 1300x1200x1200mm - weight 950kg ADVANTAGES - German made - used thickness planer, very good condition Net price: 8900 PLN Net price: 2070 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7914 TECHNICAL DATA - shaft width 640mm - number of knives 4 pcs - max thickness of the workpiece 250mm – from above: - pawls/ejectors - geared infeed shaft, pulling - pressure roller - planing shaft - pressure roller - smooth outfeed shaft, pulling – from below: - adjustable rollers in the lower bed 2 pcs - motor 7.5kW Tjdpezu R Hnofx Amrec - electric bed lifting - lifting motor 1.1kW - 2 feed speed settings - feed motor 1.3kW - dimensions L/W/H 1130x1300x1200mm - weight 1026kg ADVANTAGES – manufactured by the Polish brand JAROMA – electric bed lifting – DTR documentation – used thickness planer, very good condition Net price: 15900 PLN Net price: 3698 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7992 TECHNICAL DATA - Loading areas: 2 - Manually adjustable side clamps: 2 x 6 pcs - Pneumatic vertical clamps: 2 x 6 pcs - Max. length of glued elements: 3600 mm - Max. height of glued elements: 1500 mm - Max. thickness of glued elements: 130 mm Tedpfx Aozmgk Tomrjc - Guides for gluing thin elements - Dimensions (L/W/H): 4300x1570x2110 mm - Weight: 1400 kg ADVANTAGES – Two work areas – Gluing length: 3600 mm – Pneumatic cylinders – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, very good condition Net price: 14900 PLN Net price: 3465 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), functionality: fully functional, Internal article number: 26095 Lathe Weiler Condor 81, Type B Serial number: 84112 The machine is equipped as follows: Three-jaw chuck, Weiler 160 Base holder, Multifix "B" MK3 drill chuck Chuck guard 3-axis digital display (K&C) 4x Multifix "B" steel holders Collet set with draw tube Technical data: Center height 165 mm Center distance 750 mm Spindle speed: 22 to 2800 rpm Tsdpfxez E Nxzj Amrec Spindle bore 40 mm Short taper spindle head, DIN 55027, size 5 with bayonet lock Tailstock, MK 3 Feeds from 0.015 to 0.46 mm/rev Dimensions (L x W x H): 200 x 100 x 130 cm Weight: approx. 1000 kg In good technical condition and fully functional! You are welcome to inspect the machine while it is powered on, in our heated warehouse covering an area of over 500 m².

Condition: excellent (used), Catalog number 7374 TECHNICAL DATA - Dimensions of the loading hopper at the top (length/width): 840x620mm - Dimensions of the loading hopper at the bottom (length/width): 300x300mm - Rotor width: 340mm - Engine: 22kW - Screen size: 15mm - Number of knives: 6 pcs - Outlet for shredded wood: diameter 160mm - Dimensions (length/width/height): 1400x800x2000mm - Weight: 840kg ADVANTAGES – German made – Very good condition – Used wood chipper Tedpfx Aszwwx Aomroc Net price: 23900 PLN Net price: 5558 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to exchange rate fluctuations)

Condition: used, CATALOGUE NUMBER: 7650 Technical data: - max. working length: 1500mm - max. working diameter: 250mm - milling (disc milling cutter): 7.5kW - spindle – 2800 rpm, 3kW - spindle speed: 700/1200/1500/2000 rpm - grinding unit: 0.75kW - hydraulic motor: 3kW - total power: 17.75kW - air consumption: 6-8 bar - infeed for square stock up to 150x150mm - dust extraction port diameter: 100mm, 160mm - transport dimensions (L/W/H): 4350x2300x1980mm - weight: approx. 3000kg ADVANTAGES: - manufactured in Germany - automatic hydraulic copying device - original technical documentation - unpainted - used lathe, very good condition Net price: 59900 PLN Tedjztrfcopfx Amrjc Net price: 13930 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7926 TECHNICAL DATA - working length 6200mm - working width 150mm - working height 1350mm - 12 vertical hydraulic cylinders - dimensions (L/W/H) 6580/1270/2350mm - weight approximately 4000kg ADVANTAGES - very good condition - used press - unpainted - designed for professional use Net price: 69900 PLN Todpfjzmfvuox Amrjc Net price: 16256 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2017, x-travel 550 mm y-travel 2.000 mm z-travel 550 mm Control Siemens number of spindles 4 Stück Todpfx Amozwg Utsrsc Pneumatics 5,5 bar weight of the machine ca. 28 t The machine has undergone an extensive overhaul. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), CATALOGUE NUMBER 8018 TECHNICAL DATA - max. blade diameter: 400mm - blade bore diameter: 30mm - blade guard - adjustable blade arm (up/down) - max. cutting height: 100mm - max. cutting width: 540mm - hydraulic blade feed - 2 infeed rollers on the table - outfeed roller on the table - motor: 3.7kW - hydraulic pump motor: approx. 0.55kW - dust extraction port diameter: 100mm - roller width: 530mm - dimensions of the infeed roller table: 2000x640x910mm - dimensions of the outfeed roller table with scale: 2000x640x965mm - machine dimensions (L/W/H): 1900x1540x1820mm - weight: approx. 750kg ADVANTAGES – manufactured by the Polish brand REMA – technical documentation available – roller tables – very good condition – used saw Net price: 15900 PLN Todpfxsztqv He Amrsc Net price: 3698 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6950 TECHNICAL DATA - Max. width of workpiece: 220mm - Max. height of workpiece: 130mm - 4 spindles: 1) Horizontal lower spindle, 220mm, 5.5kW 2) Vertical right spindle, 130mm 3) Vertical left spindle, 130mm; (2 and 3 spindles) 5.5kW 4) Horizontal upper spindle, 220mm, 5.5kW - 4 spindles with electric up/down adjustment - All spindles adjustable up/down, left/right Tedpfx Amozwwlioroc - Spindle diameter: 40mm - 4 top feeding rollers, toothed, including 1 double roller - 1 top double roller for withdrawal, rubber - 1 bottom roller for withdrawal, rubber - Feed via cardan shafts - Smooth feed rate adjustment: 6-22 m/min - Feed motor: 2.2kW - Lifting motor: 0.55kW - Electric adjustment of planing thickness - Length of infeed table: 1970mm - Central lubrication - Diameter of dust extraction nozzle: 3x120mm, 140mm - Enclosed in a cabinet - Dimensions (L/W/H): 3350x1400x1400mm, weight: 1700kg - Made in Germany - Unpainted - Used planer, very good condition Net price: 29900 PLN Net price: 6953 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Price may be subject to change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm -13 holes of size Ø 48mm Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate Todpju Ibu Refx Amroc 8x counterholder div. shapes 1x bending trough *