Used Number for sale (28,086)

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Spindle diameter: 40 mm Tjdoz Ekkxepfx Amrjc Spindle length: 240 mm Motor power: 4 kW Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: used, Year of construction: 2008, cutting width (max.): 2,200 mm, controller model: POWERCONTROL, cutting length (max.): 4,300 mm, Equipment: scorer, TECHNICAL DETAILS Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Maximum main saw blade overhang: 125 mm Maximum feed rate: 80 m/min Saw unit Maximum tool diameter, main saw: 450 mm Motor power, main saw: 13.5 kW Maximum tool diameter, scoring saw: 180 mm Motor power, scoring saw: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Lift table, number of levels: 4 Clamping system, clamping jaws: 10 EQUIPMENT Lift table Tsdsz Eklvspfx Amroc Saw unit Scoring unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5552

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Controlled axes: 4 + Flex5 Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Sawing unit Position: Top Tool magazine: 2 slots Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 EQUIPMENT Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system WoodWOP 5.0 machine programming software Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Tedpsz Ekfvsfx Amrec External reference: 7350

Condition: used, Year of construction: 2009, machine/vehicle number: IntNr2314500, A proven, high-performance bar loader magazine, LNS, type Hydrobar 6.42 HS-4.6, is for sale. Technical data Manufacturer: LNS (Switzerland) Model: Hydrobar 6.42 HS-4.6 Tsdpfxoz E Rags Amroc Year of manufacture: 2011 Working range (diameter): Ø 6 mm to Ø 42 mm Max. bar length: 3,000 mm Guiding principle: Hydrobaric (complete oil bath) Feed drive: Hydraulic Oil capacity: approx. 150 - 170 liters (HLP 46 or equivalent) Total length of the magazine: approx. 4,850 mm Weight (empty): approx. 650 kg The machine can be inspected in operation by prior appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2014, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, working width: 3,200 mm, The machine has the following configuration: Number of machining units: 8 Pressure bar: With rubber belt Panel support stop: Present Overpressure: Present CNC positioning: Present Panel infeed trimming system: Present Number of units in the trimming area: 1 Number of units in the edge processing area: 6 Trimming unit Unit: Flush trimming unit Manufacturer/Model: RT30 Automatic time intervention: Present Motor power: 3.5 kW Speed: 9,000 RPM Edge banding Glue application system: EVA Heating lamps for edges: Present Edge magazine: Roller magazine Number of magazine positions: 6 Hot melt glue tank: Present Hot melt glue pre-melter: HM20 Pressure roller unit: Present Number of pressure rollers: 4 CNC positioning: Present End capping unit Manufacturer/Model: IT90-S Number of motors: 2 Maximum processing speed: 28 m/min Motor power: 0.65 kW Speed: 12,000 RPM Corner milling unit Manufacturer/Model: RF10 Number of motors: 2 Motor power: 1 kW Speed: 12,000 RPM Corner rounding unit Manufacturer/Model: AR30 Number of motors: 2 Automatic tool changer: Present Maximum processing speed: 18 m/min Motor power: 0.65 kW Speed: 12,000 RPM Edge scraping unit Manufacturer/Model: RB40 CNC positioning: Present Glue scraping unit Manufacturer/Model: RC20 Brushing unit Manufacturer/Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Speed: 1,400 RPM TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 150 mm Minimum panel width: 100 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Electrical connection power: 25 kW EQUIPMENT CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Tsdsz Ekh Depfx Amrsc External reference: 5062

Condition: used, Year of construction: 2011, workpiece height (max.): 50 mm, working width: 1,300 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum workpiece thickness: 50 mm Number of working areas: 2 Number of controlled axes: 3 Drilling units Number of drilling units: 4 Drilling unit 1: Top Vertical drilling spindles: 51 Tedpfx Asz Ekggemroc Horizontal drilling spindles in X-direction: 4 Drilling unit 2: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 3: Bottom Horizontal drilling spindles in Y-direction: 42 Drilling unit 4: Bottom Horizontal drilling spindles in Y-direction: 42 Milling units Number of milling units: 2 Milling unit 1: Top Controlled axes: 3 Motor power: 6.6 kW Milling unit 2: Top Controlled axes: 3 Motor power: 6.6 kW Sawing units Number of sawing units: 2 Sawing unit 1: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm Sawing unit 2: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm EQUIPMENT Albatros machine programming software Collets for workpiece clamping The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5446

Condition: used, Year of construction: 2010, controller model: PC85, working width: 1,750 mm, milling spindle speed (max.): 24,000 rpm, working length: 6,000 mm, TECHNICAL DETAILS Machining method: Drilling and milling Number of work areas: 2 Work area X-axis: 6,000 mm Work area Y-axis: 1,750 mm Number of controlled axes: 5 Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Table system: Console work table with vacuum cups Number of vacuum consoles: 10 CNC positioning: Yes Vacuum cups for workpiece clamping: Yes Number of vacuum cups: 40 Drilling unit Number of drilling units: 1 Position of drilling unit: Top Vertical drilling spindles: 20 Horizontal drilling spindles, X-direction: 5 Horizontal drilling spindles, Y-direction: 5 Total drilling spindles: 30 Milling unit Number of milling units: 1 Position of milling unit: Top Controlled axes: 5 Motor power: 12 kW Speed: 24,000 rpm Liquid cooling: Yes Automatic tool changer: Yes Number of tool magazines: 1 Tool positions: 72 MACHINE DETAILS Control: PC85 Programming software: WoodWOP 5.0 Vacuum pumps: 2 Individual output per vacuum pump: 250 m³/h Total connected power: 49 kW EQUIPMENT Console work table with vacuum cups 10 vacuum consoles with CNC positioning 40 vacuum cups for workpiece clamping 2 vacuum pumps Top drilling unit with 30 drilling spindles Top 5-axis milling unit with 12 kW electric motor spindle Liquid cooling Automatic tool changer Tool magazine with 72 tool positions PC85 control WoodWOP 5.0 programming software Automatic chip extraction Safety mats on the front of the machine Safety sensors Fixed safety guards Tsdpfjz Ekb Dsx Amrec CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8167

Year of construction: 2008, condition: used, controller model: Windows XP SP3, power: 9 kW (12.24 HP), working width: 2,500 mm, TECHNICAL DETAILS Maximum working width: 2,500 mm Minimum working width: 510 mm Number of saw blades: 6 + 1 MACHINE DETAILS Control system: Windows XP SP3 Tsdoz Ekd Ejpfx Amrjc Machine programming software: Packsize control console 3.9.3 Total connected power: 9 kW EQUIPMENT Saw carriage CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8534

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 12,850 h, controller model: Siemens Sinumerik 840 D, laser power: 2,400 W, stroke rate (max.): 600 1/min, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, TECHNICAL DETAILS Laser type: TLF 2400 turbo Laser power: 2,700 W Working area X-axis without repositioning: 3,085 mm Working area Y-axis max.: 1,650 mm Travel speed X-axis max.: 90 m/min Travel speed Y-axis max.: 60 m/min Simultaneous travel speed: 108 m/min Stroke frequency max.: 600 1/min Punching diameter max.: 76.2 mm Sheet thickness max.: 8 mm Punching force: 220 kN Workpiece weight max.: 230 kg Number of tools in the magazine: 18 pcs. MACHINE DETAILS Control system (software version): Siemens Sinumerik 840 D Pneumatic connection: 25 Nm³/h Electrical connection: 65 kVA Operating hours since power-on: 12,850 h (as of 07/01/2026) Dimensions & Weight Footprint (L × W × H): 7,900 × 8,700 × 2,400 mm Machine weight: 25,000 kg EQUIPMENT Capacitive distance control ContourLas Compact dust extractor Slag detection 18 tool cassettes Tedpfjz Duvvex Amroc 18 die holders 3 clamping jaws Automatic tool changer with 18 stations Rotation of all tools NC-controlled digital, maintenance-free AC drives Automatic repositioning Rapid shutdown of the hydraulics Automatic shutdown Tool length compensation 2 small parts slides 500 × 500 mm with sensors Quality list Punch scrap extraction Forming capability Programmable punch lubrication Programmable clamping system Adaptive stroke length control Safety devices Remote diagnostics RJ45 network connection Detailed operating manual Extensive tool set including 18 setup cassettes Storage cabinet, green TRUMPF Quickset TRUMPF Easylod Table extensions (custom-built) for processing sheets up to 4 m in length Existing spare parts, uninspected and without storage Chip conveyor with container Air-cushioned installation Multitool Thread forming

Year of construction: 2012, condition: used, functionality: fully functional, This is a combination oven/steamer CMP 101 from the premium manufacturer Rational, in an electric version. The unit has been completely overhauled in our in-house workshop and is fully functional. The unit is offered with a 6-month warranty on all electrical parts. The base shown in the picture is not included in the offer but can be purchased separately as an option. The list price is: €9,380 net. You will receive an invoice with VAT shown. Service: We will be happy to assist you in arranging a certified Rational customer service technician. This unit is the ideal choice if you are looking for a classic combination oven/steamer that you want to operate manually. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, without any installation or removal costs High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 1042 mm Minimum door opening dimensions for transport WxH: 845x1050mm Power connection: 400 V / kW: 18.6 / 50-60 Hz Capacity: 10x1/1GN Weight: approx. 132 kg Serial number: E11MH12112329081 Year of construction: 2012 Condition: used, completely overhauled, fully functional Further details: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings pre-prepared and cooled dishes to the optimal serving temperature in the ideal climate Automatic separation of fat for clean cooking chamber air Manual cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food Ventilated double-glazed door (swiveling for easier cleaning) LED cooking chamber lighting Core temperature measurement using a sensor Cool-down function High-performance fresh steam generator (automatic rinsing and emptying) Handheld spray gun with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Tsdez Hwpdepfx Amroc Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: like new (used), functionality: fully functional, fuel type: electric, Material width for the material inlet: 500 mm METRO 55 HACKER – a professional machine for shredding wood waste. A powerful sawmill shredder, designed for shredding wood waste, branches, boards, and production residues in sawmills and wood processing plants. Its robust construction and powerful cutting system ensure reliable and efficient operation even under heavy loads. The machine is ideally suited for the production of firewood chips, biomass, and material for further processing. Material width for the material inlet: 500 mm Number of blades: 2/3/4 Main engine power: 55 kW Power of the feed motor: 2x3 kW Feed speed: 25 m/min Automatic motor load control. Product features: - High work efficiency, - Robust steel construction, - Safe material feed system, - Possibility of continuous operation, - Easy operation and maintenance, - Use in sawmills and industrial plants. Application: Todoz H Tvaspfx Amrec Shredding wood and sawmill waste, Wood chip production, Biomass processing, Recycling of wood waste.

Condition: used, Year of construction: 2004, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, workpiece length (max.): 1,300 mm, edge thickness (max.): 20 mm, feed rate X-axis: 40 m/min, The machine has the following configuration: Gluing Gluing system: EVA Adhesive application: single-sided and double-sided Scoring saw Motor power: 2.2 kW Speed: 6,000 min⁻¹ Profiling unit Motor power: 6.6 kW Speed: 6,000 min⁻¹ Cross-cutting saw unit Number of motors: 2 Edge trimming unit, top and bottom Tjdpfjz Ekczex Amroc Number of motors: 2 Motor power: 1.85 kW Speed: 12,000 min⁻¹ Edge rounding unit Number of motors: 2 Motor power: 1 kW Speed: 12,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Belt sanding unit Motor power: 2.2 kW Belt sanding unit Motor power: 0.75 kW Brushing unit Motor power: 0.75 kW Brushing unit TECHNICAL DETAILS Workpiece length: 280–1,300 mm Workpiece width: 320–2,800 mm Workpiece thickness: 8–60 mm Edge thickness: max. 20 mm Feed speed: max. 40 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Chain conveyor with drive shoes Pressure bar with rubber belt Edge heating lamps Roller magazine Hot-melt adhesive tank Hot-melt adhesive pre-melter Edge pressing unit with 9 pressing rollers CE-compliant The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Condition: used, machine/vehicle number: H2X386V04481, Year of construction: 2019, operating hours: 20,655 h, load capacity: 1,800 kg, lifting height: 6,075 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 6,075 mm Load capacity: 1,800 kg Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery type: 5 PzS Battery voltage: 48 V Battery capacity: 625 Ah Battery year of manufacture: 2023 Battery idle voltage: 50.4 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT Former Linde full-service unit: Full free lift Hydraulically adjustable forks Facelift model with tilt angle display 3rd and 4th hydraulic valve Fork positioner with side shifter Semi-cabin with windshield wiper Lateral fall protection, easily removable White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals for road approval Comfort seat with lumbar support and seat heating Tsdpoz Dfrujfx Amrjc High-quality Hawker battery charger All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 t possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible for truck heights of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior arrangement from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 680

Condition: refurbished (used), machine/vehicle number: R-00710, load capacity: 60 kg, arm reach: 2,050 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 4600-60/2.05 manufactured in {year_of_manufacture_robot}. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 4600-60/2.05 Model Number: IRB Year of Manufacture Robot: {year_of_manufacture_robot} Warranty term (months): 12   Payload (kg): 60 Reach (mm): 2050 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Tsdpfjz H Nzxox Amrjc Weight (kg): 425   Controller: IRC5 Year of Manufacture Cabinet: 2015.08 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Working area, Y-axis: 1,250 mm Todpfxoz En Afs Amrjc Max. panel thickness: 85 mm Number of controlled axes: 3 Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Milling unit Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 9 kW Automatic tool changer: yes Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Control system: PC Control Programming software: WoodWOP 5.0 EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 130 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Dust extraction unit, fume extraction system for welding, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. Cartridge filter elements are pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Tedpfx Asz Hlrtemrjc Brand/Model: GRAM / Zyklonfilter ACF 130H Year: 2017 Fan power: 15 kW Capacity: up to 10,000 m3/h Filtration area: 130 m2 Filter cartridges: 5 pcs Inlet diameter: 500 mm Rotary valve/airlock for dust discharge Dimensions: height: 3.10 m diameter: 1.95 m fan: height: 1.25 m width: 1.20 m x 0.80 m stock number: 0561

Condition: used, Year of construction: 1999, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, filter area: 286 m², suction capacity: 7,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit, self-cleaning filter, pneumatic, vacuum-operated for continuous operation, from the renowned Donaldson Torit brand. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and for all types of dry dust. The fan is located behind the filter on the clean air side, minimizing the risk of explosion. The filter cartridges are pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Fan power: 9 kW Flow rate: 7000 m3/h Inlet diameter: 350 mm Number of filter cartridges: 12 Filtration area: 286.8 m2 Year of manufacture: 1999 Dimensions: Width: 2.10 m Depth: 2.50 m Height: 3.37 m Base: 2.11 m x 1.52 m Tedpez Hkgiefx Amroc Stock number: 1171

Condition: used, Year of construction: 2012, functionality: fully functional, Manufacturer: MORI SEIKI CO., LTD. (Japan) Machine model: NLX2500SY Year / Month of manufacture: August 2012 (08 / 2012) Machine weight: 6,360 kg Electrical connection: 3 phases / 50 Hz / 200 V AC Full load current: 144 A Spindle motor current: 177 A Connected power: 50 kVA Main technical specifications Working area & travels: Max. turning diameter: approx. 366 mm Max. turning length: approx. 705 mm Swinging diameter over bed: 920 mm X-axis travel: 260 mm Y-axis travel: ±50 mm (100 mm) Z-axis travel: 795 mm Max. bar diameter: 80 mm Main spindle: Tjdpfez Hwknjx Amrsc Speed range: max. 4,000 rpm Drive power: 18.5 / 15 kW Spindle nose: JIS A2-8 Chuck size: 10 inches Counter spindle: Speed range: max. 6,000 rpm Drive power: 11 / 7.5 kW Chuck size: 6 inches Tool turret: Number of tool stations: 12 stations (powered) Speed of powered tools: max. 10,000 rpm Power of powered tools: 5.5 / 4.2 kW

Condition: used, Year of construction: 2008, number of axes: 3, working width: 1,300 mm, working length: 3,200 mm, TECHNICAL DETAILS Working area, X-axis: 3,200 mm Working area, Y-axis: 1,300 mm Number of controlled axes: 3 Total number of drilling spindles: 36 Tool change stations: 10 MACHINE DETAILS Power of main electric spindle: 11 kW Tedpfx Amez Ekchjrjc EQUIPMENT Type of machining: Drilling and milling The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7468

Condition: used, Year of construction: 2007, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, controller model: PC22, TECHNICAL DETAILS Tedpfx Amez Ekbkersc The machine has the following configuration: Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min Pressure bar: with rubber belt Panel stop: with CNC positioning Panel infeed alignment system: available Edge application unit Processing interval: automatically time-controlled Motor power: 3 kW Speed: 9,000 rpm Edge processing Edge heating lamps: available Roller magazine: available Hot melt adhesive reservoir: available Hot melt adhesive pre-melter: available Number of pressure rollers: 7 Positioning: CNC-controlled Trimming unit Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge rounding unit Manufacturer/Model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Profile trimming unit Number of motors: 1 Processing interval: automatically time-controlled Motor power: 5 kW Speed: 11,600 rpm Scraping blade unit Manufacturer/Model: PN10 Glue scraping blade unit Brushing unit Number of motors: 2 Spray device: available MACHINE DETAILS Number of processing units in edge processing: 7 Control system: PC22 EQUIPMENT Pressure bar with rubber belt Panel stop with CNC positioning Panel infeed alignment system Edge heating lamps Roller magazine Hot melt adhesive reservoir Hot melt adhesive pre-melter 7 pressure rollers Trimming unit Flush trimming unit, top and bottom Edge rounding unit FF12 Profile trimming unit Scraping blade unit PN10 Glue scraping blade unit Brushing unit with spray device PC22 control The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 6042

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,828 h, functionality: fully functional, machine/vehicle number: 61700170, total width: 2,300 mm, total height: 3,300 mm, total length: 9,200 mm, overall weight: 10,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General information Year of manufacture: 2016 Operating hours: 1,828 h Serial number: 61700170 Color: Blue CE certificate available: No Documentation available: No MACHINE DETAILS Dimensions and weight Overall length: 9,200 mm Tsdpfxoz Ea Rbj Amrsc Overall width: 2,300 mm Overall height: 3,300 mm Unladen weight: 10,000 kg Transport data Transport dimensions: 9,200 × 2,300 × 3,300 mm (L × W × H) Transport weight: 10,000 kg Transport packages: 3 pcs.

Year of construction: 2015, condition: refurbished (used), functionality: fully functional, This is a combination steamer, model SCC 201 WE Elektro, from the premium manufacturer Rational. The unit has been completely overhauled in our in-house workshop and is fully functional. You will receive an invoice with VAT clearly stated. The recommended retail price is €21,940.00 net / €26,108.60 gross. Our offer price is €8,894.95 net / €10,585 gross. Service: We will be happy to assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational device type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Checked and fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after the purchase. Provision of operating manuals, connection diagrams and spare parts. Inspection according to DGUV V3. This combination steamer offers space for 20 x 1/1 GN containers. In automatic mode, the unit automatically recognizes the ideal cooking process, the size of the food, the quantity and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods and finishing). Technical data: W x D x H: approx. 879 x 791 x 1782 mm Minimum door opening dimensions for transport W x H: 925 x 1900 mm Power connection: V: 400 / kW: 37.0 / Hz: 50/60 Weight: approx. 268 kg Serial number: E21SH15052459806 Year of manufacture: 2015 Capacity: 20 x 1/1 GN or 40 x 1/2 GN Longitudinal insert: 1/1, 1/2, 2/3, 1/3, 2/8 GN Meals per day: 150-300 Condition: Tsdpfx Asz Hv H Ijmrsc Used, completely overhauled, fully functional. Further information: In combination steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C) and combination (30°C to 300°C). Care Control - self-cleaning function Core temperature probe Handheld spray with automatic retraction 8.5-inch color display and touchscreen 5 programmable fan speeds Integrated, maintenance-free grease separation system Automatic start time preselection 7 cleaning levels for unattended cleaning - even overnight Moistening adjustable in 3 levels - from 30°C to 260 °C 5 programmable fermentation levels USB interface Seamless, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are exclusively subject to our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 4,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 115 mm, total height: 2,600 mm, total width: 3,360 mm, overall weight: 3,500 kg, controller manufacturer: FANUC, controller model: FS30i, product length (max.): 1,620 mm, number of axes: 3, This 3-axis Murata MW100 Horizontal Twin-Spindle CNC Turning Center was manufactured in 2012. It features a maximum spindle speed of 4,500 rpm and a tool capacity of 2 × 8 positions. With a compact design and included chip conveyor, this machine is ideal for efficient turning applications. If you are looking to get high-quality turning capabilities, consider the Murata MW100 machine we have for sale. Contact us for further details. • Number of axes: 3+2 • Number of spindles: 2Tooling • Tool capacity: 2 × 8 positions Tedoz Hw Awopfx Amrsc • Tool holder: Not specifiedUtilities • Coolant pressure: 5 bar • Electrical consumption: 10 kWh • Compressed air consumption: 16.4 m³/hDocumentation • Electrical user manual: Yes • Mechanical user manual: NoNotes / Description • High-speed automatic CNC two-station/front turning machine • 3 units available Additional equipment • Chip conveyor: Included • Dimensions: 3,850 × 1,000 × 1,400 mm Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2014, Control Heidenhain x-travel 1.000 mm y-travel 1.100 mm z-travel 1.040 mm tool taper HSK 63 number of tool places 338 Pos. Condition: Used Technical features & accessories: - TM218 tool changer - KNOLL FKA/750 cooling unit - KNOLL KF220 belt filter - KNOLL 850K-1 chip conveyor Tedpfxjz Hz N Ie Amrec Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91128554, Year of construction: 2018, operating hours: 1,440 h, load capacity: 1,400 kg, lifting height: 4,550 mm, mast type: triplex, construction height: 2,200 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! The forklift truck is in very good technical and visual condition. The tires have been replaced, and a battery service was performed in June 2026. TECHNICAL DETAILS Tjdpfxsz Arlbs Amrec Load capacity: 1,400 kg Lifting height: 4,550 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex Drive: AC Battery type: 48V 4EPZS 620 Battery capacity C5: 620 Ah Number of cells: 24 Acid volume: 153 l Front wheels: Pneumatic tires, size 1x BA Three new wheels installed in May 2026 Control type: Standard joystick Operating hours: 1,440 h Motor power: 6.0 kW Battery service: June 8, 2026 Battery load test result: 72% (Result see attachment of the advertisement) Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,270 x 2,200 mm Own weight without battery: 2,105 kg Battery weight: 935 kg Total weight with battery: 3,040 kg EQUIPMENT Battery charger (Model: SLT150, Year of manufacture: 2018) Operator protective roof