Used Nt 551 for sale (8,670)

Condition: new, Balluff BDS 21MR05-NT-PU-05-SA5 Inductive sensor,unused in opened original packaging, 100% functional, scope of delivery according to photos Fedpfsi D T Dvex Aalepg

Condition: ready for operation (used), Bosch NT 600 power supply, used, in good condition, 100% functional Fpedpfxoi D Uans Aalog

Year of construction: 2015, condition: used, functionality: fully functional, We are offering this used UNIBLOC Type 551 rotary lobe pump in stainless steel, year of manufacture 2015. Fpsdpfx Aasx Tq E Djleg Manufacturer: BOCKW Type: CB 3-132 M/4 D Serial number: 523.753.2/11 Rated power: 7.5 kW Rated frequency: 50 Hz Rated voltage (Delta): 400 ± 5 V Rated voltage (Star): 690 ± 5 V Rated current: 15.5 / 9.0 A Power factor cos φ: 0.80 Speed: 233 min⁻¹ Protection class: IP 56 Weight: 98 kg Year of manufacture: 03/15 Standard: IEC 60034 UNIBLOC rotary lobe pump in stainless steel for food applications. The transfer pump was previously installed in a tanker truck. Also ideal for viscous products as well as water, wine, soft drinks, beer, sparkling wine, milk, etc. Type 551, 7.5 kW electric motor with frequency control attached. 233 RPM. Operating manual included. The pump has been cleaned and is ready for immediate use. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, functionality: fully functional, Randek Truss System NT produces roof trusses using C-press heads, movable magnetic fixtures on a steel floor and one of our many crane systems. Crane systems: Wall mounted crane Column crane Motorized overhead crane Counter balanced crane Press head: 23T, 27T, 35T, 50T Fpedpfxsxwkuqj Aalsg Laser system as an option.

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 551 PORTATİF KOPYA FREZE MAKİNESİ, functionality: fully functional, - Used for lock handle, hinge, espagnolette slots and grooving in desired size on aluminum and plastic profiles - Copy assembly suitable for your operation Fpsdsrcm D Dopfx Aalog - Various grooving features independent of the copy assembly with the help of the stop OPTIONS - Lower cabinet system - Pneumatic system

Year of construction: 1997, condition: used, MACHINE FOR FRAME 45 GRADIUS WITH GLUE SYSTEM AUTOMAT Fjdpfedbycaex Aalopg

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total length: 5,500 mm, total height: 2,000 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 400 mm, product width (max.): 650 mm, compressed air connection: 6 bar, film width: 650 mm, Manufacturer: Kallfass Verpackungsmaschinen GmbH Model: Super Wrap 650 De Luxe In-Line Bundling Machine Year of manufacture: 2009 Dimensions: approx. 3160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical specifications: Film: Flat film, up to approx. 120 µm Fpedoxxlhnepfx Aaleg Film roll width: max. upper 650 mm, lower 620 mm Working height: 815 - 915 mm Passage width: 650 mm Passage height: 100 - 400 mm Power supply: 400 V three-phase Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 20 L/cycle This particularly versatile bundling machine operates with two flat film rolls. Product infeed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and therefore maintenance-free. Film rolls are simply placed, and film feeding is motor-driven. Manufacturer: Kallfass GmbH Model: Shrink Tunnel Standard 650 NT Year of manufacture: 2009 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical specifications: Tunnel passage width: 650 mm Tunnel passage height: 400 mm Tunnel outfeed, extended: approx. 500 mm Working height: 800 - 900 mm Power supply: 400 V three-phase Rated power: 26.5 kW Rated current at 400V: 38.5 A in stand-alone operation Powerful, universally applicable shrink tunnel with laterally adjustable air flaps and externally adjustable outlet openings underneath for precise control of hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculating air system, tunnel hood with additional double-chamber system, and significantly improved all-round insulation ensure energy-efficient operation. Equipped with infinitely adjustable rod chain conveyor. Inspection and demonstrations are possible at our premises by appointment. Function guarantee, no warranty.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, table length: 1,500 mm, table width: 3,000 mm, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! The machine was serviced in 2022 by an Amada specialist. The service protocol can be found attached to this listing! Fjdpfjxgg Irox Aalopg TECHNICAL DETAILS Laser power: 4 kW Table width: 3,000 mm Table length: 1,500 mm EQUIPMENT Ridel chiller Donaldson extraction unit 2 exchange tables

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Fjdpfjtwgirox Aalopg Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 12

Year of construction: 2002, condition: used, Equipment The machine can be modernized with new software according to customer requirements. Measuring range X = 5000 mm Y = 1500 mm Z = 2400 mm Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer! Note: Our offer is directed exclusively to professional customers! Fjdpecn H A Asfx Aaljpg (Changes and errors in the technical data, specifications and and prices as well as subject to prior sale)

Condition: used, Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Fpjdpfx Aaowwl Nlslsg Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: AA2/004283, functionality: fully functional, working width: 240 mm, TECHNICAL DETAILS Max. planing width: 240 mm Planer block diameter: 120 mm Number of knives: 4 Electrical data Voltage: 400 V Connected load: 10 kVA Fsdpfxjwkq Ndj Aalspg General information Year of manufacture: 2017 Weight: 3,350 kg EQUIPMENT - Documentation available - CE marking present

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 20306061, functionality: fully functional, operating hours: 64,000 h, pressing force: 100 t, stroke length: 200 mm, throat depth: 415 mm, working width: 3,110 mm, distance between stands: 2,700 mm, Amada Astro II 100 NT bending cell. Includes loading robot, bending robot, repositioning device with extra support, loading table, conveyor for unloading pallets (currently disconnected), safety fence. Comes with multiple loading and bending grippers, both clamp and vacuum type. Worksheet loading both as stack or vertical loading unit. Bending force: 980kN Table length: 3110 mm Stroke: 200 mm Open height: 500 mm Worksheet thickness min: 0.6 mm Worksheet dimensions min: 150 x 150 mm Worksheet dimensions max: 800 x 1000 mm/ 300 x 1800 mm Fpjdpfx Ajwakicjalog Worksheet mass max: 20 kg (including bending robot gripper/ loading robot gripper) Serviced by local Amada representative.

Condition: excellent (used), Year of construction: 2007, I sell the double end cutting and tenoning machine SCM CONCEPT NT. Working width up to 3000mm Configuration left side / fix: 1 pc. cutting saw aggregate 1 pc. moulding aggregate 1 pc. moving jumping moulding aggregate Configuration right side / moving: 1 pc. cutting saw aggregate 1 pc. moulding aggregate 1 pc. moving jumping moulding aggregate Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately. Fedpfxotv Rxbe Aalopg

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 32 kg, total width: 490 mm, total length: 575 mm, total height: 880 mm, warranty duration: 24 months, We offer for sale a Universal Vacuum Cleaner Karcher NT 65/2 Tact2 Condition of the machine – Perfect, brand new unit Year of manufacture – 2024 Fodpfex Aux Rjx Aalspg Vacuum cleaner with TACT² system. Designed for removal of hazardous class M dust. Meets the highest European safety standards. Technical Specifications - Power supply parameters: 1 / 220–240 / 50–60 Ph / V / Hz - Airflow: 2 x 74 l/s - Vacuum: 254 / 25.4 mbar / kPa - Container capacity: 65 l - Container material: Plastic - Max rated power: 2760 W - Nominal diameter: ID 40 - Power cable length: 10 m - Sound pressure level: 73 dB(A) - Colour: anthracite - Weight without accessories: 24.5 kg - Weight with packaging: 31.332 kg - Dimensions (L x W x H): 575 x 490 x 880 mm Scope of Delivery - Drain hose (oil-resistant) - Automatic shut-off at maximum collected liquid level - Antistatic system - Metal suction tube, 2 x 550 mm - Filter cleaning, Automatic Tact² Filter Cleaning System - Flat pleated filter, cellulose fibre material - Crevice nozzle - Electrically conductive elbow - Universal floor nozzle width: 360 mm - Bumper bar - Push handle - Swivel castor with brake - Safety class: I - Electrically conductive suction hose, 4 m The vacuum cleaner is equipped with an antistatic system with grounding of suction nozzles, tubes, hose, and elbow to discharge electrostatic charges that may occur when vacuuming very fine dust. It can operate with suction hoses of 40 mm and 60 mm diameter. It is ideal for the automotive and construction industries as well as general industrial applications. Two turbines ensure high suction power. Each is equipped with the TACT system, allowing the vacuum to remove up to 1000 kg of fine dust (class A) using a single filter. The flat pleated Eco filter is suitable for collecting very fine class M dust as well as liquids. Its design offers a large filtration surface while maintaining compact overall dimensions. The TACT2 automatic filter cleaning system alternately shakes half of the filter every 7 seconds, effectively preventing reductions in suction power during operation. Included is a drain hose, which facilitates emptying water directly into a floor drain. The vacuum cleaner has a 65-litre plastic container.

Condition: ready for operation (used), working width 240mm working height 120mm 6 spindles spindles set: bottom/right/left/top/top/bottom spindles speed 6000 RPM - two last 8300 RPM Fpjdpfx Aaow Afgueleg two axes heads regulation spindles diameter 40mm electric regulation of working height variable regulated feeder pneumatic pressure of feeding rolls

Condition: ready for operation (used), working width: 240 mm working height: 150 mm spindles: 5 spindles set: bottom/right/left/top/bottom spindles speed: 6000 RPM spindles diameter: 40 mm minimal diameter of tool: 100 mm max diameter of tool: 200 mm motors: 3x 5,5kW; 2x 4kW; 2,2kW pneumatic pressure of feeding rolls Fsdpfjw Aflqex Aalepg year: 2010

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 60,120 h, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Amada, laser type: CO₂ laser, laser source manufacturer: FANUC AF 4000 E, laser hours: 60,120 h, laser power: 40,000 W, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, working length: 3,050 mm, working width: 1,620 mm, working height: 380 mm, repeat accuracy: 0.1 mm, type of cooling: water, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, 4kw, CO2, Fanuc, new turbine in 2025 & vacuum pump. Everyday at work. Automation LKI MP 300 Fpodpfxsxa Dxus Aalsg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 11,746 h, load capacity: 2,500 kg, lifting height: 3,680 mm, construction height: 2,300 mm, overall weight: 3,820 kg, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 2,500 kg Lift height: 3,680 mm Overall height: 2,300 mm Fork length: 1,100 mm MACHINE DETAILS Drive type: 4-cylinder LPG engine Front tires: 7.00-12 (70%) Rear tires: 6.00-9 (60%) Weight: 3,820 kg Operating hours: 11,746 h EQUIPMENT 3rd valve Fsdpfx Aaex E Tdyjlopg Front work lights Side shift

Condition: used, Year of construction: 2008, operating hours: 570 h, load capacity: 1,000 kg, lifting height: 1,550 mm, free lift: 1,500 mm, mast type: simplex, construction height: 1,965 mm, fork length: 1,150 mm, empty load weight: 748 kg, drive type: Elektro, construction width: 810 mm, High lift truck Fedpfx Aot Ddtgjalepg Load center of gravity: 600 Fork width: 170 mm Fork thickness: 60 mm Mast type: Mono Condition: Ready for use and fully functional Technical condition: good Front tires Type: Polyurethane Front tires Condition: 80 - 100% Rear tires Type: Polyurethane Rear tires Condition: 80 - 100% Battery Volt: 24V Battery Ah: 160Ah Battery manufacturer: AIM Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Pulse control, non-creeping tires,

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 04306, measuring range X-axis: 1,000 mm, measuring range Y-axis: 650 mm, measuring range Z-axis: 650 mm, workpiece weight (max.): 700 kg, total height: 2,734 mm, total width: 1,160 mm, total length: 1,680 mm, overall weight: 950 kg, input voltage: 230 V, ambient temperature (max.): 22 °C, ambient temperature (min.): 18 °C, Equipment: type plate available, !!!DISCOUNT!!! Motor-driven coordinate measuring machine with robust bridge design, mounted on air bearings. Included with the machine are a Renishaw 5-axis touch-trigger probing system PH20, compact touch probe TP20 with 1x SF module, Renishaw KIT 23 (stylus kit), TCR20 module changer (compatible with PH20 probe), UCCT5 interface kit for operation (joystick, cabling, servo end amplifier), UNITABLE control console, calibration sphere with holder (ceramic, diameter 25), PC table (120x80x72 cm), and Dell Optiplex 7010 (W10) with monitor and A4 inkjet printer. Fodpfewu Uccsx Aalepg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 13,000 h, machine/vehicle number: MP2512C1, sheet thickness (max.): 6 mm, working length: 2,500 mm, working width: 1,270 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item on time by 15/12/2025!  The machine has been regularly serviced by Amada. TECHNICAL DETAILS Punching working area X x Y: 2,500 x 1,270 mm Laser working area X x Y: 2,000 x 1,270 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Accuracy: ±0.07 mm Maximum material thickness: 6 mm Press force: 200 kN Max. strokes X-axis: 370 rpm Max. strokes Y-axis: 280 rpm MACHINE DETAILS Power consumption: 22 kVA Fpodsxzf T Aepfx Aaljg Machine weight: 18,000 kg Operating hours Laser hours: 13,000 h Punching hours: 17,000 h Note: Information regarding the tools can be found in the attached images.

Condition: used, functionality: fully functional, machine/vehicle number: 250-1850X825, total height: 6,300 mm, total width: 2,030 mm, total length: 2,680 mm, load capacity per storage section: 250 kg, input voltage: 415 V, warranty duration: 12 months, Equipment: safety light barrier, KARDEX SHUTTLE 250-1850X825-NT 1 AVAILABLE GREY IN COLOUR TRAY WEIGHT 250KG NUMBER OF TRAYS 45 TRAY DIMENSIONS - 1850mm x 825mm Fpjdpswtqxdsfx Aaljg AUTO ADJUST TRAY HEIGHT PER TRAY 12 MONTHS WARRANTY SERVICE & MAINTENANCE CONTRACTS AVAILABLE THESE MACHINES ARE MODULA AND CAN THEREFORE BE REDUCED IN HEIGHT TO FIT ANY HEIGHT RESTRICTIONS

Condition: good (used), functionality: fully functional, machine/vehicle number: VWASVTF24F6182826, mileage: 186,247 km, fuel type: diesel, empty load weight: 2,952 kg, overall weight: 3,500 kg, tire size: 195/70R15, axle configuration: 4x2, wheelbase: 2,900 mm, energy efficiency: C, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, Year of construction: 2016, * Financing subject to conditions and approval by the finance company. Fedpfxsxfkvdo Aalopg * THERMO KING V-500 MAX refrigeration unit

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 97,000 h, laser power: 2,500 W, sheet thickness (max.): 6 mm, workpiece length (max.): 2,000 mm, workpiece width (max.): 1,500 mm, Submission of a bid obligates the buyer to collect the machine on time by 05/09/2025! The machine has been serviced by the manufacturer. TECHNICAL SPECIFICATIONS Power and Cutting Force Cutting force: 300 kN Power: 2.5 kW (CO₂) Workpiece Cutting elements to length: 3,020 × 1,500 mm Laser cutting length: 2,000 × 1,500 mm Max. sheet thickness: 6 mm Stations Turret station: 41 fixed and 4 rotatable stations MACHINE DETAILS Electrical Data Connected load: 400 V / 68.3 kVA Apparent power: 60 kVA Compressed Air Connection Compressed air connection: 8 bar Compressed air consumption: 48 m³/h Occupational Safety Width of protected area: 30 m Minimum safety distance: 1.36 m Machine reaction time + total fire protection wall reaction time: 320 ms Overrun time: 300 ms Machine braking distance: 180 mm Weight of the punching/laser machine: 30,000 kg EQUIPMENT Automatic part removal (suction cups) up to 45 kg Fpedpfx Aow Axa Uealeg Automatic sheet metal feed max. 3,050 × 1,500 mm Automatic bale output 1,500 × 400 mm Double loading ramp Light barrier Wire cutting kit Bale push sensor Chip extraction Conveyor for offcuts removal Separate lubrication for punching and threading tools Sheet bending sensors Punches included in the offer Loading of the machine can be arranged upon request. A large tooling package can be purchased for an additional 10,000 EUR.