Used Nexus 350 for sale (11,400)

Condition: used, Year of construction: 2001, Clamping force: 350 t Platten dimensions: 1040 x 950 mm Iiodsva Ht Sepfx Afijh Distance between tie bars: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Shot volume: 442 cm3 -2 core pullers -2 air valves, controllable hot runners: 1-16 chanel -1 kaskade Type: Horizontal Drive: Hydraulic

Condition: new, Year of construction: 2023, operating hours: 153 h, functionality: fully functional, machine/vehicle number: 258678, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,193 cm³, injection pressure: 2,000 bar, mold height (min.): 450 mm, ejector stroke: 250 mm, opening stroke: 1,009 mm, plate width: 1,300 mm, plate height: 1,100 mm, total length: 9,200 mm, total width: 2,500 mm, overall weight: 27 kg, heating capacity: 29.4 kW (39.97 HP), pressure: 2,000 bar, number of injections: 1, power: 186 kW (252.89 HP), Equipment: documentation/manual, Engel e-victory 2440/350, Year of manufacture: 2023, Clamping force: 350 tons, tie-barless, servo-hydraulic, electric injection and plasticizing, Max. shot volume: 1193 ccm, Max. specific injection pressure: 2000 bar, Operating hours: 153, Screw diameter: 70 mm, Control panel: CC300, Medical version, stainless steel covers, medical-grade machine paint, nickel-plated clamping plates, HLI safety door on the operator side, 1x core pull electrically pre-wired, Engel-Flomo on movable platen (operator and non-operator sides) as well as on the injection side rear of the machine, plus many extras. Iodpfx Afsw Rfypsisih Included: Viper 40 handling device, 30 kg load capacity, and transfer box. The system is being sold on behalf of a customer. The machine has never been in production and is essentially as new. The original price was €629,000. The system is connected to power and can be inspected at any time by appointment.

Condition: excellent (used), Cross-cut saw Velox 350 with roller conveyor approx. 5000 mm Machine ready for immediate use 1.5 kw, 380 Volt Iiodpfx Ajt Ta Urefieh 2 speeds Double miter cuts possible

Year of construction: 2012, condition: excellent (used), WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm Iiodjmv Elpepfx Afieh diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

Condition: good (used), Year of construction: 2011, machine/vehicle number: HD 11009208-2, pressure: 350 bar, overall weight: 890 kg, rotational speed (max.): 1,500 rpm, power: 31 kW (42.15 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Year of manufacture: 2011 Type: RS716E/350 Iiodpfx Afetuqmgoieh Serial number: HD 11009208-2 31 kW 350 bar 1500 1/min 47 l/min With Hammelmann ACM 225S-4/HE 400/690V 66.2/38.4A 50Hz 37kW 1480 1/min Condition: used (see pictures and type plates) Scope of delivery: 1 pump

Condition: excellent (used), Year of construction: 2003, operating hours: 87,861 h, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 470 mm, displacement volume: 123 cm³, injection pressure: 2,835 bar, injection weight: 112 g, mold height (min.): 250 mm, Battenfeld HM 1000/350 injection molding machine (237) Number: 237 Availability: in stock Year of production: 2003 Producer: Battenfeld Injection molding machine condition:used Screw diameter [mm]:30 Injection weight [g]:112 Injection pressure [bar]:2835 Column spacing [mm]:470 x 420 Plate size [mm]: 680 x 663 Min. mold height [mm]:250 Control type: Unilog B4 Tongue: german Installed power [kW]:28.9 Working hours [h]: 87861 Weight [kg]: 4500 Dimensions [mm]: 4300 x 1000 Feed hopper: NO Robot socket: Yes Core string: 1x Air valve: 2x Isdpfx Afswyukqeisih

Condition: excellent (used), Year of construction: 2012, Battenfeld HM 110/350 injection molding machine Year of manufacture :2012 Control : Unilog B6 E Injection unit: Screw diameter: 35 mm Injection pressure: 2083 bar Injection volume: 169 ccm Injection volume: 153 g Iodpfx Afeu U Ar Isisih Closing unit : Closing force : 1100 kN Distance between columns : 470 x 420 mm Mold height min: 275 mm Opening : 500 mm Mould height max : 775 mm Ejector stroke: 150 mm General information: Machine dimensions (m) LxWxH: 4.0 x 1.5 x 2.1 m Weight : 4,500 kg Equipment: - The machine is in very good condition and has 35,000 hours of operation. - Bimetallic system - 1 x pneumatic valve - 1 x pulling core - Interface for the robot in accordance with EUROMAP 67

Condition: used, SNOL Type: SNOL 120/350 SNOL heat and drying cabinet up to 350°C Description: Iijdpsvyfzzjfx Afish SNOL high-temperature drying cabinet 120/350 For industrial applications. Max. 350°C Internal volume 120 liters Internal dimensions 555x350x555 mm 400 volts, 50 Hz, 6 kW Vertical air circulation through built-in fan Overtemperature protection Chamber made of stainless steel Door hinge on the right, including two shelves Low power consumption Fast heating and cooling times Powder-coated housing RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² Iodpfx Aeuddcgofijih at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: new, Year of construction: 2025, The track chain links for multi-blade saws are cast from high-quality cast iron or steel castings, ensuring the superior quality of the finished tracks. The links can be equipped with additional carrier spikes. The track components—guides, pins, and bushings—are made from high-grade materials and undergo heat treatment and thermo-chemical processing. The feed accuracy of the track is achieved by a special machining method for the holes in the links. Upon request, we manufacture guides, breakers, sprockets, pulleys, and shafts. We design and produce tracks for multi-blade saws from all over the world, for manufacturers such as: A.COSTA, RAIMANN, TOS SVITAVA, REMA RESZEL, GABIANNI, PAUL, OGAM, and all models of Chinese tracks. Iedpfx Aowvp Ddsfioih

Condition: good (used), Year of construction: 2009, machine/vehicle number: HD 10906347, pressure: 350 bar, overall weight: 850 kg, rotational speed (max.): 1,500 rpm, power: 35 kW (47.59 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Year of manufacture: 2009 Type: RS716E/350 Serial number: HD 10906347 35 kW 350 bar 1500 1/min 47 l/min Iijdpfetuqmkox Afish With Küenle KDGN 225S4 NV 400 / 690V 67.2 / 39A 50Hz 37kW 1475 1/min Condition: used (see pictures and nameplates) Scope of delivery: 1 pump

Condition: used, Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production Iiedpfx Ajgal A Dofijh -Length measuring device: used for slats/blinds production -Rotary encoder: Heidenhain ROD 426.003 - 1000 -Pneumatic components: Manufacturer Festo -Dimensions: 350/400/H1130 mm -Weight: 80 kg

Condition: excellent (used), Year of construction: 2010, Battenfeld HM 110/350 injection molding machine Year of production: 2010 Control: Unilog B6 Number of working hours - 35 0000 Injection unit: Screw diameter: 35 mm Injection pressure: 2083 bar Injection volume: 169 ccm Injection capacity: 153 g Closing unit: Closing force: 1100 kN Distance between columns: 470 x 420 mm Min mold height: 275 mm Opening: 500 mm Max mold height: 775 mm Ejector stroke: 150 mm General information: Machine dimensions (m) LxWxH: 4.0 x 1.5 x 2.1 m Weight: 4.500 kg Specification: Iedpfx Afswq D Nqjieih 1. Plasticizing system with a diameter of Ø35mm. 2. (06.X17) Europakiet UNILOG B6 consisting of: - 07.D00 adjustment elements, - 02.K02 air valve controlled in time function - 01.C01 hydraulic control of the NW 6 core on the closing plate - 06.B21 robot connection according to EUROMAP 67 - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet - 06.R20 2 CEE 16A sockets mounted on the side wall of the control cabinet 3. 06X06 UNILOG B6S package consisting of - extended functions of the control system with programs - APS system - cycle time analysis - user pages - visualization of graphic functions of actual values in the form of 16 curves - 4 surrounding curves - Alarm and logging protocol extended to 10,000 events - Quality Table function extended to 10,000 last cycles - additional USB ports for network connections - keyboard with foil buttons - Statistical Injection Process Control SPC function - injection speed, plasticization and hold-down pressure regulated by servo valve 4 machines in perfect condition are available.

Condition: good (used), Year of construction: 2000, Chipper with horizontal feed , but vibrating chute is not included working width 350 mm Motor rotor 30 kw Iisdpfok Twl Tsx Afieh

Year of construction: 2003, condition: excellent (used), SEALPAC 350 ID.NO. 2435 Sealpac 350 thread sealer vacuum / gas machine year mod 1999. Very nice condition little used since new! Tool dimensions 530 x 325 mm (Halfgastro) Dimensions 400 x 75 cm H 180 cm. Isdpfxsixqmne Afioih

Condition: used, Technical details: faceplate diameter: 350 mm width: 80 mm boring diameter: 50 mm weight of the machine ca.: 32,0 kg dimensions: 350x125 mm face slide with 4 internal/outer clamping chucks (clamping travel 80mm) clamping area internal: dia 110-350mm and external dia. 40 -300mm Iijdou Nk T Sspfx Afioh flange intake dia. 130mm *

Condition: good (used), Container turning device, welding turning device, roller stand -Roller stand: wheels Ø 125 x 35 mm Iisdsv A Sztepfx Afieh -Roller spacing: 140 mm -Quantity: 1 piece available -Dimensions: 350/80/H170 mm -Weight: 6.6 kg

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, Iiodedxxrqjpfx Afijh -2 pillars: punching tool -Admission: M20 fine thread -Dimensions: 270/350/H335 mm -Weight: 132 kg

Condition: excellent (used), Flat gear motor, gearbox, spur gear, angle gear, worm gear, Movigear, flat gear, flat gear -Gearbox: Parallel shaft gear box, without type designation SEW EURODRIVE Parallel shaft gear motor series F..DR.. -Drive: without electric motor -Part No.: M17 GH 3 250613 -Translation: i= 38 -Hollow shaft: Ø 90 mm -Recess for motor: Ø 250 mm -Bolt circle for engine: Ø 300 mm -Dimensions: 720/350/460 mm -Weight: 226 kg Iiodpfx Ast Sz Htofijh

Condition: used, Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Box tube punch: 50 x 30 mm -Round tube punch -Coordinates stop -Projection: 155 mm -various tool with you -Punch quick change system -Page and depth stops -Max. Punching capacity: 36 t -2x quick change tool carrier -Weight: about 2000 kg Ijdpob A I Hdefx Afijih

Condition: good (used), Core for crane traverse, adjustable traverse, crane traverse, hall crane, crane hook traverse, load traverse, heavy load traverse, -Heartpiece: for crane traverse, sheet metal upper traverse .: 1031 4140 G-12-02-02 -Dimensions: see photos -Quantity: 2 pieces available Isdpfx Afev Hm Szoisih -Price: per piece -Transport dimensions: 350/180/H310 mm -Weight: 17.7 kg/piece

Condition: used, Clamping angle for workpiece clamping, measuring device Isdpfxjcvpubj Afisih -Dimensions: 400/350/H230 mm -Thickness: 35 mm -Groove: 15 mm -Surface: milled -Weight: 48 kg

Condition: used, Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread Iijdsgtu Uuspfx Afioh -Load racks: 7 pieces, 220 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 4 pieces with shäkel -Price: complete -Dimensions: 450/350 / H220 mm -Weight: 42 kg / pc.

Condition: used, Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel Ijdpfxegtu Uqo Afijih -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

Condition: good (used), T-slot plate, clamping plate with dovetail slots, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press Iiedpfjmydncjx Afieh -Opening: 150 x 100 mm -Groove width: 18 mm -Hole spacing: 200 x 250 mm, Ø 14 mm -Dimensions: 480/350/H60 mm -Weight: 66 kg