Used New Bench Drill for sale (25,992)

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Gsdsu Ng Ncepfx Akyokc Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: used, This listing is for the This listing is for the Epindorf New Brunswick I/O Module The unit is in full working condition and is ready for immediate release The Eppendorf New Brunswick I/O Module is an analog input/output interface module designed to work with Eppendorf’s New Brunswick and bioprocess control systems. It provides a way to connect external sensors, actuators, and control devices to your laboratory process equipment to acquire analog signals and control external hardware. Analog Inputs & Outputs: The module accepts analog signals from external devices (such as sensors measuring temperature, flow, pH, etc.) and can output analog control signals to external actuators (like pumps or valves). Typical signal formats it supports include 0–5 V and 4–20 mA ranges, which are industry standards for process instrumentation OPC Server Interface: It can interface with OPC-compatible software such as Eppendorf’s BioCommand® SCADA for real-time monitoring and advanced control. OPC (OLE for Process Control) is a standard communication protocol that lets control software talk to instrumentation hardware. Process Integration: By connecting to process control systems, it helps in monitoring and controlling bioprocess parameters during fermentation, cell culture, or other controlled experiments How It’s Used Laboratory and bioprocess engineers use this module to: Integrate external sensors and actuators with New Brunswick or BioFlo systems. Godpfx Akexwc Hljyokc Capture analog data (such as voltage or current tied to physical parameters). Provide control signals to devices like external pumps or valves based on process logic. Link equipment to process automation software for data logging or control strategies. Eppendorf Typical Features Although detailed manufacturer technical specs are limited in published catalogs, typical features include: Configurable input/output ranges (e.g., 0–5 V and 4–20 mA). Eppendorf Compatibility with OPC communication standards for integration with software like BioCommand. Eppendorf Robust lab design to handle use in controlled environments. QuestPair

Condition: used, This listing is for a Benchmark Scientific BV1000 BenchMixer Vortex Mixer. The unit is in full working condition and is ready for immediate release. The Benchmark Scientific BV1000 BenchMixer Vortex Mixer is an essential laboratory instrument designed for both gentle shaking and rapid vortexing of samples, including full 50 mL tubes. With a wide variable speed range of 200 to 3,200 rpm, this versatile vortex mixer adapts to various mixing needs, making it suitable for biochemical, microbiological, and other laboratory applications. The BV1000 features advanced functionality that allows it to operate in touch or continuous mode, enhancing user convenience and flexibility. Key Features: Variable Speed Control: Adjust the mixing speed from 200 to 3,200 rpm to accommodate different sample types and desired mixing intensities, ensuring optimal results. Versatile Mixing Options: The mixer comes equipped with a rubber cup head for mixing single tubes and can be fitted with a 3" flat head (sold separately) for multiple tube mixing or an optional combination head (sold separately) that accommodates up to 60 small tubes or a microplate. Q-Drive Counter-Balance System: This innovative system maximizes vortexing efficiency while minimizing noise and vibration, providing a quieter and more stable operation. Cold Room and Incubator Compatible: Designed for use in a range of environments, including cold rooms or incubators, expanding its versatility in various experimental conditions. Spill-Proof Electronic Controls: The mixer features robust electronic controls that are protected against spills, ensuring reliable performance and ease of maintenance. Suction Feet: Equipped with suction feet to prevent walking during operation, ensuring stability and safety during high-speed vortexing. Specifications: Speed Range: 200 to 3,200 rpm Mixing Capacity: Compatible with standard rubber cup head; can be fitted with 3" flat head or combination head (sold separately) Orbit: 3 mm Operating Temperature: 4 to 65 °C (39 to 149 °F) Electrical Rating: 115V, 60Hz Gedpfx Aoxx Adaekyskc Dimensions: 17 x 13 x 16 cm (H x W x D) / 6.7 x 5 x 6.3 inches Weight: 3.8 kg (8.4 lb)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Bacci Lignum horizontal drilling machine with oscillation, pneumatic table, adjustable Godpfx Ajwyghbjkyjkc

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1250 workpiece height max.: - mm distance column till spindle centre: 1250 mm Godpfxewid Auo Akyskc drill head horizontal traverse: 980 mm vertical adjustment of arm: 800 mm distance table - lower edge spindle: 2,05 x 9,2 x 2,85 mm spindle taper MT: MK4 bore spindle stroke: 280 mm range of revolutions per minute - continous: 28-1.195 3 Steps U/min swivel range of the arm: 90 Grad feed: 0,1/0,2/0,3/0,4/0,8/1,2 6 Steps mm/U column diameter: 300 mm base plate surface area: 1.370 x 750 mm weight of the machine ca.: - t dimension machine xH: 2,05 x 9,2 x 2,85 m Cooling water system with feed Table with clamping surface 1,370mm x 750mm incl. drilling cube *

Condition: used, Technical details: bore capacity in steel (diameter): 40 mm throat: 360 mm bore stroke: 280 mm spindle taper MT: MK 5 spindle speed:: 32 - 1400 U/min feed: 0,11-1,73 mm/U Godpjwid Uwsfx Akyokc connected load: 6 kW Distance spindle/table max.: 750 mm table clamping surface:: 780+650 mm drill table adjustment: verical 800 mm column diameter: Größe: 230 x 950 mm dimension machine xH: 1,1 x 0,8 x 2,8 m weight of the machine ca.: 1,5 kg for thread cutting clockwise and counter clockwise operation *

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm throat: 320 mm bore stroke: 250 mm spindle taper MT: MK 4 spindle speed:: 63 - 710 / 8step U/min feed: 0,07; 0,13; 0,254; 0,42 mm/U Godpfjwcygcsx Akyjkc Distance spindle/table max.: 600 mm table clamping surface:: Ø 450 mm table rotating: 360 ° clamping table - swivable: ja Grad drill table adjustment: 600 mm column diameter: 215 mm total power requirement: 2,2 kW weight of the machine ca.: 730 kg dimension machine xH: 1,0 x 0,58 x 1,4 m Equipment: Quick-action drill chuck RÖHM Supra 16mm Coolant tank with pump Socket for 220V *

Condition: new, Year of construction: 2021, New 4 Head Automatic Capper & Cap Feeder Never Used / New Model RCP-141 To include Capper Feeder & automatic capper machine Gsdpfx Akjv R I D Hjyskc

Condition: as good as new (ex-display), Year of construction: 2013, machine/vehicle number: I1305008, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, spindle mount: MK 3, drilling depth: 130 mm, height adjustment type: mechanical, throat depth: 250 mm, overall weight: 320 kg, drilling capacity: 25 mm, column diameter: 110 mm, spindle speed (max.): 2,880 rpm, spindle speed (min.): 125 rpm, Dear Sir or Madam, We are offering a demonstration pillar drill "HXMC model Z5025" with paint damage. We are happy to answer any questions. Gkodpfxjv T Anro Akyec This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. No returns accepted.

Condition: as good as new (ex-display), Year of construction: 2013, machine/vehicle number: F130507, functionality: fully functional, input voltage: 400 V, spindle mount: MK 3, drilling depth: 135 mm, height adjustment type: mechanical, total width: 510 mm, total length: 870 mm, total height: 2,050 mm, throat depth: 320 mm, table width: 450 mm, table length: 500 mm, drilling capacity: 30 mm, column diameter: 120 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 65 rpm, Dear Sir or Madam, We are offering a demonstration pillar drill "HXMC model Z5030A" with paint damage. We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Gjdsv T Atnjpfx Akyskc Please check the information in the PDF. No returns accepted.

Condition: excellent (used), Four-head paper drill. Several pieces available !!! Brand Hang Model 106DTK4 Details 4-head paper drilling machine With adjustable drilling heads Operation Electric foot switch, 2 speeds Available directly This additional information is standard for this model. Always check the details carefully during your visit. Godjudl Ikopfx Akyokc The 1975 Hang 100DTK4 printing machine is an iconic and reliable piece of equipment that has made a significant impact on the printing industry. Manufactured by Hang, the machine offers advanced features for its time and set the standard for high quality and efficient printing. The Hang 100DTK4 features a robust and durable design, ensuring stability and consistent performance during the printing process. Its printing technology, although conventional by today's standards, allowed for precise and sharp prints with satisfactory resolution for its era. Equipped with user-friendly controls and mechanical automation, the machine offered programmable settings for various printing formats and configurations. Its operation required skilled operators who were able to achieve accurate and repeatable printing results. The printing machine's capabilities extended to a variety of substrates, including paper, paperboard and lightweight cardboard, satisfying a range of printing applications common at the time. Launched in 1975, the Hang 100DTK4 presented a technological advance for its era. Its sustained performance and contribution to the printing industry are remarkable. While newer printing machines with advanced digital technology have emerged, the Hang 100DTK4 remains a historic symbol of performance and innovation in the printing industry in the 1970s. The machine has collector's value and serves as a testament to the evolution of printing technology over the decades.

Condition: excellent (used), I sell a HANG 106DTK paper drill, operational in good condition. There are several Hang drills on offer. Gsdpfxoudpc Ss Akyekc

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37: Ø 65 mm Drilling capacity in cast iron: Ø 75 mm Spindle mount: MK 5 Overhang: 1250 mm Spindle stroke: 400 mm Spindle speeds: 22.4 – 1800 rpm Feed range: 0.056 – 0.56 mm/rev Column diameter: Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Gkedpetwzk Djfx Akyec Clamping area, base plate: 1320 x 1000 mm Dimensions L x W x H (with motor!): 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!): 2250 x 1000 x 2800 mm Weight: 5100 kg Accessories / Special features: • Square table L x W x H 650 x 500 x 500 mm • Central clamping device • Feed mechanism • Right-left operation • Motorized vertical movement • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Horizontal drilling machine gomad unit one piece horizontal drilling .Net price fv.Year of production 2004 very good condition machine operational and complete Gkjdpfotxabwex Akyoc

Condition: used, Technical details: bore capacity in steel (diameter): 30 mm throat: 260 mm bore stroke: 160 mm spindle taper MT: MK3 feed steps: 0,1; 0,2; 0,3 mm/U und manuell spindle speed:: max. 1800 stufenlos U/min Distance spindle/table max.: 750 mm table clamping surface:: L: 280 x B: 355 mm table rotating: nein ° clamping table - swivable: 360 Grad drill table adjustment: vertikal: 600 mm column diameter: 130 mm threading: Nein / no total power requirement: 1,1 kW weight of the machine ca.: 570 kg dimension machine xH: 0,9 x 0,9 x 1,9 m Gksdpsva Higsfx Akyec This machine has 2 tables. Drilling table LxW: 370 x 500 mm Attachment table: LxW: 420 x 750 mm Clamping surface = 320 x 600 mm, transverse displacement (X-axis) 250 mm possible Ejection of tool via ejector wedge accessories: vice machine base *

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately – Godpfxsxdttio Akyekc

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills Godsxdh Hqjpfx Akyskc • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Year of construction: 2025, operating hours: 12 h, condition: new, Front drilling machine – automatic for drilling legs at various angles, with a pendulum table. Triple drilling with chip extraction. The machine can operate in different settings and configurations. Designed for through-hole drilling. Gedpfx Akexb Elxoyekc

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Gksdpfxsxlqxfj Akyoc Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: used, Double grinding pedestal AEG type DWS DWS 301/1100 No: 87 154303 Year of manufacture: approx. 1970 Grinding wheel diameter: max. 300 mm Grinding wheel width: max. 40 mm Motor power: 1.1 kW Grinding wheel speed: 1500 rpm Power connection: 380 Volt, 50 Hz - Fitted grinding wheels Ø 260 mm - Motor newly fitted with bearings Required space (L x W x H): 650 x 450 x 370 mm Weight: 64 kg Gkedpfxexrgtxe Akyoc Good condition

Condition: used, Year of construction: 2013, SCHNELL Optibat 100/3/12 Cutting Bench Gjdpfx Ajvtp Uxokyjkc This cutting bench features 3 tracks. Length of 12 meters. It can cut materials up to 40 mm in thickness. Manufactured in 2001, it was revised in 2013. Number of tracks: 3 Length: 12 m Materiel Thickness: Cut up to 40 mm

Condition: reconditioned (used), Year of construction: 2020, operating hours: 15,000 h, Task drilling machine wu 5 units top ,two front two rear . Godpsuc Tqdofx Akyekc Automatic .Choice of units .No collision .Can be equipped with drilling heads

Condition: new, Year of construction: 2025, YB-1300E Year 2025.12 Available immediately in Europe Max Sheet Size 1300×1250mm Min Sheet Size 400×400mm Top Sheet Thickness 150-600g Bottom Sheet Thickness A、B、C、E、F (Corrugated paper), (Industrial paperboard) Max Speed 6000Sheets/hour Dimensions 11.5×2×2.4M Machine Weight 5000kg Machine Power 10KW/380V Gsdpfsy Iycusx Akyskc

Condition: excellent (used), Number of spindles 4 Drilling capacity -25 mm Throat 205 mm Quill stroke 120 mm Spindle speeds 150-2'000 rpm Table size 1400 x 275 mm With tapping device Godpfey Iz Sdex Akyjkc MARCELS MASCHINEN CH

Condition: new, Year of construction: 2026, CORMAK ZX7016 is a versatile drilling and milling machine that combines compact dimensions with impressive functionality. Designed to meet the requirements of DIY enthusiasts, it is perfectly suited for precision metalworking. Thanks to the MK2 spindle taper, the machine provides exceptional stability and accuracy during operation. Additionally, the digital readout of the spindle quill extension allows full control over the process, resulting in repeatable and precise results — both in a home workshop and when supporting production processes. Godpswvhmwefx Akyokc The machine has been manufactured in accordance with applicable European Union standards and is CE marked and supplied with an EC Declaration of Conformity. The control panel and safety systems comply with current occupational health and safety requirements. The spindle and gear cover is equipped with a microswitch, providing additional safety during operation. KEY ADVANTAGES OF THE MACHINE: Digital readout of drilling/milling depth Built-in workshop light integrated into the machine body Durable and professional construction ensuring a long service life Multifunctionality: drilling and milling capabilities in one machine Drive transmission via a reliable belt drive Spindle mounted on precision ball bearings Adjustable spindle height for different applications Through spindle with a thread for mounting work heads IP54-rated safety switch for enhanced user safety Quiet and efficient electric motor ensuring comfortable operation ✔ All mechanical components, including pulleys, are made entirely of metal for maximum durability and reliability ORIGINAL ZX7016 – PRECISION AND STABILITY AS STANDARD The machine is equipped with a solid, heavy-duty cross table, ensuring smooth and precise movement along two axes (X/Y), allowing accurate control of the machining process. A vice can be mounted directly onto the worktable (vice available as optional equipment). The cross worktable is an integral part of the machine's construction, ensuring rigidity and reliability during operation. Technical Specifications: Specification Value Max. drilling diameter 16 mm Max. vertical milling diameter 12 mm Max. face milling width 40 mm Motor S1/S6 0.55 kW / 0.75 kW Motor speed 1420 rpm Voltage / frequency 230 V / 50 Hz Table dimensions (L × W) 420 × 152 mm Table travel along Y-axis 115 mm Table travel along X-axis 230 mm Distance from column to spindle 180 mm Spindle nose height above table 155–355 mm Spindle quill travel 77 mm Spindle taper MK2 Spindle speeds 320, 400, 500, 650, 800, 900, 1350, 1450, 1800, 1900, 2700, 3300 rpm T-slot width and spacing 12 × 80 mm Weight 75 kg Note: The operating parameters provided are for reference only and may vary depending on the type of material being machined, the tool used, and its technical condition (e.g. degree of wear or bluntness). Standard Equipment Drill chuck 1–16 mm Drill chuck arbor Cross worktable Basic hand tools DTR / operating manual