Used Nc Rotary Table for sale (89,324)

Condition: new, table diameter 550 mm table load 500 Kg swivelling range 135 Grad tilt adjustment: manually/mechanicall motorisch turning speeds max. 5 U/min stufenlos table load capacity 250 kg. vertikal Kedpfx Afsh D Svkjfjfa total power requirement 0,8 kW weight of the machine ca. 245 Kg dimensions of the machine ca. 820 x 730 x 710 m

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90 Grad turning speeds 0,2 - 2,5 U/min bore 90,0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90,0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Kfsdpfsxabl Sex Affoa Scope of delivery: - control (integrated) - foot switch

Year of construction: 1972, condition: ready for operation (used), Table Ø: 300 mm Overall height in horizontal position: 155 mm Width: 500 mm Kfedpfod Rlifjx Affea Depth: 500 mm

Year of construction: 2015, condition: used, workpiece diameter 300 mm workpiece weight 999 kg workpiece height 145 mm Features: -Digital display vertical axis Kjdpfxexflcls Affsfa -Automatic feed -Programmable automatic end stop -Grinding spindle drive with infinitely variable electronic speed control -Infinitely variable cross feed and table rotation -24V magnetic clamping plate 300 mm -Various occupational safety devices, e.g. protective cover monitoring, operating status display via traffic light -Lubricating oil level monitoring -The machine was completely overhauled in 2015, at which time the entire electrical system was replaced with PLC control and 24V control voltage -Paper belt filter system specially designed for this machine The following work has now been carried out: -Replacement of bellows and belts -New bearings for grinding spindle -Grinding carriage bed and rotary table bed scraped by hand to restore better and more precise running characteristics -Grinding carriage and cross table lifted from machine body and all tracks cleaned, lubrication checked -Various wear parts, such as rubber caps and switching elements, replaced -Detailed functional check -Modernisation of feed arm -Paint touch-up work, machine colour: light grey RAL 7035 and RAL 7012

Condition: good (used), Year of construction: 1993, machine/vehicle number: D206311, Offer 23344 Technical data: - Load capacity 20 kg - Face plate diameter 320 mm - Face plate can be swiveled left + right with grid adjustment - Faceplate speed electr. infinitely variable Kjdsq Ev Stepfx Affjfa - Faceplate with right + left rotation - Hollow shaft with passage approx. 25 mm - Welding current transmission 300 A - Drive 400 V - Table height in horizontal position 820 mm - E. foot switch - Space requirement with table approx. W 600 x H 820 x D 500 mm - Weight approx. 100 kg

Condition: new, table diameter 700 mm table load 0,5 t swivelling range 0 - 135 Grad turning speeds 0,2 - 3 U/min height adjustment 400 - 900 mm Ksdpfofv Azlsx Affofa boring diameter 100 mm welding current max. 500 Ampere total power requirement 0,75 kW including remote control and welding current transmission.

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90 Grad turning speeds 0,2 - 2,0 U/min turning speeds 1,2 - 12,0 U/min bore 20,0 mm weight of the machine ca. 50 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Kjdpexaatnjfx Affsfa Scope of delivery: - control (integrated) - foot switch

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Kfjdpfx Aocblc Ssffja Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Condition: new, Table dimensions 1000 x 1000 mm Kedpfxsvn Uzte Affsfa table load 4000 Kg swivelling range 105 Grad turning speeds 0,15 - 1,5 U/min height adjustment 1010 - 1836 mm hollow spindle diameter mm welding current 1000 Ampere max. torque on the faceplate 8000 Nm total power requirement 6,0 kW dimensions of the machine ca. m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0,6 - 6,0 U/min spindle bore 60,0 mm swivelling range 0 - 90 Grad weight of the machine ca. 62 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. Kfedpfjxaafqox Affsa - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: used, machine/vehicle number: 2414-0075 bzw. 2314-0703, table clamping surface: 520 x 1000 mm 6 clamping grooves: 16 mm groove spacing: 90 mm Ksdpfx Afeb Hmbpofsfa Clamping plate horizontally rotatable to the right and left by: 45° each tiltable from/to the machine by: 15° each swivelling to the right and left: 15° each permissible load movable approx.: 1000 kg permissible load rigid table approx.: 1500 kg weight: 376 kg Suitable for milling machines DECKEL: FP 3 L; FP 3 LG; FP 3 LV

Condition: new, table diameter 1400 mm table load 2,0 t Kfodpsfv Aw Tjfx Affea swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 6000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,1 + 2,2 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right).

Condition: new, table load 1000 kg table diameter 900 mm turning speeds 0,12 - 1,2 U/min swivelling range 0 - 135 Grad speed Kipp 0,35 U/min welding current 500 A dimensions of the machine ca. 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Kfjdpfexaac Aex Affea Furnishing : - 1 control (integrated) - 1 wired remote control

Condition: used, with mounted three-jaw chuck Kfjdpfx Afoda I Rvsfsa table-Ø: 200 mm bore approx.: 18 mm overall height: 100 mm total height with chuck: 165 mm width: 270 mm length: 320 mm

Condition: new, table diameter 1400 mm table load 3,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 6000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,1 + 2,2 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. Kodpfefv Axbjx Affefa • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: as good as new (ex-display), Year of construction: 2024, weight max. in kg max. 1000 kg turning speeds 0,18 - 0,58 U/min height 976 - 1436 mm inclination 0 - 115 ° table diameter 895 mm voltage 380 V Kfedpew U U R Ejfx Affoa total power requirement 2,0 kW weight 685 kg range L-W-H 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW!! Special price on request The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: - Continuously variable speed adjustment - Freely movable foot switch - Hand-held remote control with 5 meter cable - Freely movable control panel with digital speed display - Analogue angle display * Manufacturer video (identical rotary table): ?v=Vayw8Ny64nc

Condition: used, machine/vehicle number: 7173, Platform Ø: 1500 mm Kodpfx Aecg Rn Ujffsfa Winding height approx.: 1800 mm Reception length for the winding rolls: 400 mm drive motor: 380 V space requirement: 2400 x 1500 x 2100 mm

Condition: new, table diameter 700 mm table load 0,6 t swivelling range 0 - 90 Grad turning speeds 0,2 - 2,0 U/min 900 Nm total power requirement 0,37 / 0,37 kW Kfodpfefv Axuex Affsa • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: ready for operation (used), Outside Ø: 350 mm Kfodpfxeg Hzazo Affea Bore: 40 mm Construction height: 115 mm including three-jaw chuck AROWA, 250 mm Ø, bore: 75 mm Total weight:

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission Kjdsfv Aykopfx Affofa

Condition: new, table diameter 495 mm table load 300 / 150 Kg swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall manuell turning speeds 0,5 - 3,2 U/min Kfodpfxsl R Nnve Affoa spindle bore 65 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt Welding turntable with hollow shaft 300kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal

Condition: new, table diameter 690 mm table load 500 / 250 Kg turning speeds 0,5 - 3,2 U/min Torque Drehen 1200 Nm spindle bore 100 mm swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall maschinell Kippen 1500 Nm welding current 500 Ampere Kodpfx Afol R Nnyefjfa connected load frequency 230 Volt Welding turntable with hollow shaft 500kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal

Condition: new, table diameter 800 mm table load 600 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 2,0 U/min height adjustment 850 - 1300 mm max. torque on the faceplate 900 Nm engine output 0,37 / 0,37 kW welding current 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. Kfodefv Aynepfx Affja - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 1000 mm table load 1200 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 1,0 U/min max. torque on the faceplate 900 Nm welding current 500 Ampere Kfjdpfjvn Uwuox Affoa total power requirement 0,75 + 0,75 kW weight of the machine ca. 0,8 t Welding rotary tilting table - Remote control - 2 x welding current transmission

Condition: new, Table dimensions 1000 x 1000 mm table load 2500 Kg swivelling range 105 Grad turning speeds 0,15 - 2,0 U/min height adjustment 1010 - 1836 mm hollow spindle diameter mm welding current 700 Ampere max. torque on the faceplate 5000 Nm total power requirement 6,0 kW dimensions of the machine ca. m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design Ksdpfx Asvn Uypoffofa • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)