Used Nail Tie for sale (8,533)

Condition: good (used), Note: The grating may show signs of damage, scratches, dents and welds. The scope of delivery includes: 01x inserted shelf grating, used Material color: hot-dip galvanized Total width: approx. 1,640 mm (crossbar direction) Total depth: approx. 1,183 mm (bearing bar direction) Gsdjqwzvcopfx Afiouh suitable for Post depth: 1,200 mm Clear span: approx. 1,090 mm Truss support: approx. 50 mm Support bar spacing: 30/1.8 mm Frame height: approx. 45 mm Mesh width: approx. 68 x 47 mm Internal designation: GR-45 Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Year of construction: 2003, Labelling machine Krones Prontomatic Type 12-6/6-4, year of manufacture 1994 - reconditioned. Capacity: 13500 bph Swing-top label Voltage: 400 V Frequency: 50 Hz Length: 2450 mm Width: 2000 mm Height: 2500 mm Formats: Crown cap returnables: 0,33l, 0,5l NRW; crown cap one-way: 0,33l; swing-top: 0,5l, 0,58l Machine partitioning: 180mm Running direction: Right - left Operation / Control: Simatic S7-300 Gedpfx Aexbpggofisuh

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 106546-11, total height: 3,550 mm, total length: 7,185 mm, total width: 4,720 mm, overall weight: 8,000 kg, The drilling method used by the deep hole drilling machine is single-lip gun drilling. Drilling Unit Information: - Number of spindles: 1 - Spindle speed, infinitely variable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Max. drilling depth: 1,000 mm (in one pass, no retraction required) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter / indexable inserts: 40 mm - Max. thread cutting: M27 - Milling material removal rate: 250 ccm/min Travel Paths: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steadies) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Coolant supply: deep drilling oil - Tank capacity: 1,200 liters - 1 x scraper-belt chip conveyor - 1 x screw conveyor system - 1 x hydraulic unit and pneumatic unit/equipment - 1 x central lubrication system Gjdpfexdm Awex Afiouh - 1 x submersible pump: Pump delivery: 200 l/min - 1 x low-pressure pump: Pump delivery: 100 l/min Drive power: 2.2 kW - 1 x compact band filter: Filtration rate: 175 l/min For machining steel and non-ferrous metals - 1 x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1 x air cooler (heat exchanger): 22.5 kW - 1 x oil mist extraction unit: Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with tool holder SK 40 Tool Changer Magazine comprising: - Tool magazine with intermediate gripper - Tool holder SK 40 - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Number of tool storage positions: 80 - 2 x swiveling tool steady rests for guiding and supporting long drilling tools, with automatic positioning to home position. Clamping Table with B-Axis and NC Rotary Table: - Length / width: 800 x 600 mm - B-axis: 360° - Positioning accuracy, B-axis: +/- 30 seconds - Table travel: 800 mm - Payload (centered): 1,500 daN Electrical Equipment Information: - 1 x CNC control system, Heidenhain iTNC 530 - 1 x drilling process monitoring - 1 x RENISHAW touch probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Condition: ready for operation (used), functionality: fully functional, Automatic hydraulic press with GANG–NAILS connectors for trusses. Hydraulic press for pressing metal connectors and manufacturing trusses and other structural elements. Machine dimensions: 5.0 x 1.30 m – Left roller table 12.95 x 3.9 m – Right flat table 12.00 x 3.90 m – Pressing area 400 x 130 x height 20 cm – Total length 26.30 m x depth 3.90 m (tables) and 5.0 m (press). Includes a large batch of cartons of GANG–NAILS connectors. Gusdpfx Afexdiuceish The right table is used for assembly and preparation of trusses and for distributing GN plates. Then, stepwise feed and clamping in the press. Finished elements are received on the left roller table. Manual removal of the item. In good technical condition.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: P190029694, total length: 1,200 mm, input voltage: 220 V, input current: 380 A, Deze snijtafel (oplegmachine) kan meerdere lagen opleggen. Deze machine wordt voornamelijk gebruikt voor orders met aantallen. Dit kunnen zijn voor textiels, sier- en slaapkussens,matrashoezen, boxspringhoezen, Pu-hoezen(incontinentie hoezen) etc. die bedoelt zijn voor particulier, winkelketens, hotels, campings, zorgcentra's en webwinkels. Je kan de gewenste patronen tekenen en grote partijen in één keer uithalen. Gjdpfx Afewrpr Tjijuh

Condition: good (used), Panel size: 1500 x 4000 mm panel height: 370 mm Thickness of the top plate: 50 mm Working height when assembled: 870 mm Gujdodzln Uepfx Afioh Weight: 6,8 t

Condition: good (used), The scope of delivery includes: 01x depth bar frame, used Material color: sendzimir galvanized Total length: approx. 1,250 mm for shelf depth: 1,200 mm Clear span: approx. 1,100 mm Cross beam support: approx. 50 mm Support bracket: L: approx. 80 x 80 mm Total width: approx. 860 mm Inner width: approx. 855 mm Material thickness: approx. 3 mm Side frame: Length: approx. 1,2450 - 1,070 mm Sloping at the front Width: approx. 200 mm Height: approx. 195 mm Gjdpfxor Dr Sus Afiouh End stop: Width: approx. 200 mm Height approx. 195 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This is a used item, there may be scratches, dents and signs of use. This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which will be charged separately depending on the place of delivery or scope of delivery.

Condition: used, Flash pasteurising to stabilise beverage quality. The product is heated via a plate heat exchanger and held at pasteurising temperature for a defined amount of time, after which it is then cooled down again. Capacity: 350 hl/h Operation / Control: Excluding control cabinet with software. Software can be delivered by agreement Features: 1x plate heat exchanger, 1 tube heat exchanger, 1x hot water pump, 2x beer pump Gsdpfx Afoxbn Ucsijuh

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 106729-11, total length: 8,880 mm, total width: 6,360 mm, total height: 4,700 mm, overall weight: 34,000 kg, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 0 - 8000 rpm - Spindle drive power: 17 kW at 100% ED S1 operation / 20 kW S6 operation - Maximum drilling depth: 1800 mm / 2100 mm with pilot drilling without drill bush holder - Minimum/maximum drilling diameter: 4 - 40 mm based on ST 60 - Maximum thread cutting: M30 - Milling material removal rate: 475 cc/min Traverse Axes: - X-axis travel: 2000 mm - Y-axis travel: 1000 mm - Z-axis travel: 2200 mm Gujdpfx Afow Htirjijh Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil, type HSD 400 - Total capacity: 2400 liters - 1x hinged belt chip conveyor - 1x screw conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x oil mist extraction unit - 1x central lubrication: Central lubrication unit for oil impulse lubrication - 1x submersible pump: Pump flow rate: 200 l/min Pump drive: 1.1 kW - 1x submersible pump: Pump flow rate: 500 l/min Pump drive: 2.2 kW - 1x submersible pump: Pump flow rate: 100 l/min Pump drive: 5.5 kW - 1x compact band filter: Filtering capacity: 175 l/min For machining steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x water cooler: Cooling capacity: 30 kW Milling and Drilling Spindle Unit: - Spindle housing with AC motor spindle - The position of the machining unit on the Y-column enables true 4-side machining at table center - Swivel axis device, swivel range: -30°/+15° 2x manual steady rests: - On guide rails with manual positioning - Can be swiveled away and manually opened and closed Drill bush holder: - Precise changeover between deep hole drilling with drill bush and conventional machining, or deep hole drilling with pilot drilling - Automatic drill bush holder change via standard tool magazine Pickup Tool Magazine: - For standard tools - 36 tool storage positions - Max. tool holder: HSK 63 / Max. permitted tool diameter: 100 mm / Max. permitted tool length: 300 mm - Tool transfer from magazine to spindle via NC-controlled spindle positioning - 1 slot for drill bush holder Clamping Table with X-Axis and NC Rotary Table: - Length/width: 1250x1250 mm - 360° rotary workpiece table - Load capacity (centered): 10 t - Workpiece swing diameter: 2000 mm Electrical Equipment Information: - 1x CNC control Sinumerik 840D SL (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 40 kW

Condition: good (used), Measuring volume X = 2356 mm Y = 1000 mm Z = 1250 mm The machine can be upgraded to customer specification with new software. Price: On request! Setup and commissioning possible! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! (Changes and errors in the technical data, information Gujdpfxedfdcts Afijh and prices and subject to prior sale!)

Condition: good (used), The scope of delivery includes: 6x steel panels, used Manufacturer: SSI Schäfer Total depth: approx. 960 mm Inner depth: approx. 955 mm for stud depth: 950 mm Total width: approx. 300 mm Material thickness: approx. 2.50 mm Guedpfov R T Epjx Afioh Material color: Sendzimir galvanized Frame profile: approx. 300 x 40 x 20 mm Weight per piece: approx. 7.940 kg Your contact persons: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Flash pasteurising to stabilise beverage quality. The product is heated via a plate heat exchanger and held at pasteurising temperature for a defined amount of time, after which it is then cooled down again. Godpfx Aoxbn Tfofijuh Additional title: Years of manufacture: 1993 - 2011 Capacity: 600 hl/h Beer with 6,0 g/l CO2 Hot water: 750 hl/h Material: EPDM HT/NBR/1.4439; EPDM HT/1.4439 Features: Product plate heat exchanger; Water heater plate heat exchanger; Heat holder piping; Beer pump; Booster pump beer; Hot water pump; Measurement and control sensors

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 105220 / 105221, Technical data Manufacturer: ZEISS & Stiefelmayer Type: SMM C Year of construction: 1999 Measuring plate Length = 6000 mm width = 2500 mm Weight = approx. 10 t Equipment 2 SMM stands incl. RDS heads Control cabinets 2 ZEISS Dynalog P3 control panel Climbing aid left and right The machine can be upgraded with new accessories according to customer requirements. Price: on request! Installation and commissioning possible! We would be happy to provide you with a detailed offer. Godpfofrbg Iex Afisuh Please note: Our offer is directed exclusively to professional customers. (Changes and errors in the technical data, information and prices and subject to prior sale)

Condition: good (used), The scope of delivery includes: 08x steel panel with support angle, used Manufacturer: SSI Schaefer material color: hot-dip galvanized total depth: approx. 960 mm Guodpfx Aoppt N Sefijh for frame depth: approx. 950 mm total width: approx. 300 mm total height: approx. 50/40 mm contact surface: approx. 16 mm weight | pcs.: approx. 7,650 kg 01x steel panel end termination, used Manufacturer: SSI Schäfer material color: hot-dip galvanized total depth: approx. 960 mm for frame depth: approx. 950 mm total width: approx. 300 mm total height: approx. 50/40 mm weight | pcs.: approx. 7,830 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: used, Year of construction: 2005, Additional title: cold paste application Nominal capacity: 18000 Fl/h Control range: 25000 Fl/h Current: 16 A Voltage: 400 V Formats: 0,5 l NRW, 0,5 l Euro and 0,5 l clip-lock Machine partitioning: 8 glue palettes, sixes gripper for labels, 16-piece bottle table (diameter: 640 cm) Running direction: parallel (from right to right) Operation / Control: Siemens S7 SPS Features: 2 cold glue units, each with one glue pump, electric height adjustment, breakage detection, operating hours counter, preparation for integration of an inkjet dating system, mechanical adjustment for clip-lock bottles Gusdpfx Afexbn Sbeioh

Year of construction: 1984, condition: excellent (used), Technical data Manufacturer: Stiefelmayer Type: C-MAN S/N: 432309901 Year of manufacture: 1990 Column cross section 160/160 cross arm 80/80 Measuring range X = 4400 mm Y = 1600 mm Z = 1800 mm The machine can be modernized with new accessories according to the customer's requirements. Price: on request! Assembly and commissioning possible! Guodpfohpzbcox Afioh We will be happy to provide you with a detailed offer. Note: Our offer is intended exclusively for professional customers. (Changes and errors in the technical data, specifications and prices and prices as well as subject to prior sale).

Condition: good (used), The scope of delivery includes: 01x Pressed grate, used Material color: hot-dip galvanized Total depth: 995 mm (bearing bar direction) Total width: 1,190 mm (cross bar direction) bearing bar dim.: 40/2,0 mm frame height: 40 mm Guodpfxoncbgzs Afioh Mesh size: 100 x 100 mm Weight: approx. 11,44 kg | pcs. Internal designation: K Remark: - The gratings may have damages, scratches, dents, welds etc. General information about the item: This item is offered for pickup only. A beyond desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: excellent (used), Various dice head extensions similar to the figure in the offer. Data and price: On request! Guedpfx Afody Apnoijh We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! (Errors and omissions in the technical data, information and prices and subject to prior sale!)

Condition: good (used), The scope of delivery includes: Gsdpfx Asrfx Hzefijuh 01x Locking bracket, used Material color: sendzimir galvanized Total length: approx. 1,640 mm Leg "A" approx. 39 mm (flanged) Leg "B" approx. 63 mm Support surface: approx. 60 mm Leg "C" approx. 13 mm Material thickness: approx. 1.50 mm Weight / piece: approx. 2.330 kg General information about the article: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. depending on the place of delivery or scope of delivery.

Year of construction: 1989, condition: excellent (used), machine/vehicle number: 563006941, Technical data Manufacturer: Stiefelmayer Type: C 160 Year of construction: 1989 Double stand CMG (2 x double stand --> 4 measuring stands) Serial number: 563006941 Software: Metrosoft CM SP2 Measuring plate (2x) X = 6000 mm Gjdpegm Tybjfx Afieuh Y = 3000 mm The machine can be modernized with new accessories according to customer requirements. The machine can be assembled together (2 x 6 meters --> see photos) or separately. Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer. Note: Our offer is directed exclusively at specialist customers. (Changes and errors in the technical data, information and prices as well as and prices as well as subject to prior sale).

Condition: good (used), Note: The grating may show signs of damage, scratches, dents and welds. The scope of delivery includes: 01x inserted shelf grating, used Material color: hot-dip galvanized Total width: approx. 1,340 mm (crossbar direction) Total depth: approx. 1,183 mm (bearing bar direction) suitable for Post depth: 1,200 mm Clear span: approx. 1,090 mm Truss support: approx. 50 mm Support bar spacing: 30/1.8 mm Frame height: approx. 45 mm Mesh width: approx. 68 x 47 mm Internal designation: GR-40 Your contact person in our company: Guodpfx Aeqntf Esfish Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Miscellaneous marking tools on sale. (Image) Godpfx Afedy Ankeijuh Data and price: On request! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! (Errors and omissions in the technical data, information and prices and subject to prior sale!)

Year of construction: 1987, condition: excellent (used), machine/vehicle number: 31700987, Technical data Manufacturer: Stiefelmayer Type: SMM-C Year of construction: 1987 Measuring range X: 2500 mm Y: 1000mm Z: 1200mm Miscellaneous Measuring counter: MZ200 (retrofit in 2014) Column cross-section: 100 x 100 Cross section cross arm: 60 x 60 The machine can be upgraded with new accessories according to customer requirements. Price: on request! Gusdefd Dr Hspfx Afieh Assembly and commissioning possible! We would be happy to provide you with a detailed offer! Please note: Our offer is directed exclusively to professional customers! (Changes and errors in the technical data, information and prices as well as prior sale reserved)

Year of construction: 1990, condition: excellent (used), machine/vehicle number: 432309901, Technical data Manufacturer: Stiefelmayer Type: C-MAN S/N: 432309901 Year of manufacture: 1990 Column cross section 160/160 cross arm 80/80 Measuring range X = 4400 mm Y = 1600 mm Z = 1800 mm Guedpfx Aohpza Uofish The machine can be modernized with new accessories according to the customer's requirements. Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer. Note: Our offer is intended exclusively for professional customers. (Changes and errors in the technical data, specifications and prices and prices as well as subject to prior sale).

Condition: excellent (used), machine/vehicle number: 26720686, Measuring plate X = 3000 mm Gujdpfjff Ea Hox Afish Y = 6000 mm Price: on request! We would be happy to provide you with a detailed offer! Please note: Our offer is directed exclusively to professional customers. (Changes and errors in the technical data, information and prices as well as prior sale reserved)