Used Multispot M8 for sale (596)

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 11 drill bits -1x drill bit: Right-hand rotation, 32 mm spacing Fsdpfx Ajb A R H Tekyjpn -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Number: 4 drill heads available -Price: per piece -Dimensions: 350/100/H90 mm -Weight: 5 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 11 drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm Fpedpsb A R Iajfx Akyen -Number: 4 drill heads available -Price: per piece -Dimensions: 350/95/H85 mm -Weight: 6 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 19 drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Number: 2x drill heads available Fedpfx Aob A R Igokyepn -Price: per piece -Dimensions: 635/75/H100 mm -Weight: 10 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 3x drill bits -Recording: M8 -right/left: rotating alternately Fjdpsb A R N Rofx Akyspn -Drill bit spacing: 26 mm -offset: 7 mm -Number: 4 drill heads available -Price: per piece -Dimensions: 85/70/H120 mm -Weight: 4 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 5x drill bits Fpodpsb A R Rcsfx Akyon -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Dimensions: 160/95/H90 mm -Weight: 4 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 9 drill bits -Recording: M8 Fedpsb A R Rhefx Akyopn -right/left: rotating alternately -Drill bit spacing: 32 mm -Dimensions: 140/125/H120 mm -Weight: 4 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 3x drill bits Fpodeb A R Rispfx Akysn -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Dimensions: 145/70/H80 mm -Weight: 4 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 7x drill bits -Recording: M8 -right/left: rotating alternately Fpodpfx Akeb A R Rreyen -Drill bit spacing: 32 mm -Number: 2 drill heads available -Price: per piece -Dimensions: 240/70/H80 mm -Weight: 6 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 6x drill bits -Recording: M8 -right/left: rotating alternately Fpedob A R Rxopfx Akyon -Drill bit spacing: 32 mm -Dimensions: 210/60/H100 mm -Weight: 8 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 7x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Number: 2 drill heads available Price: per piece -Dimensions: 245/70/H90 mm Fpodpsb A R R Iofx Akysn -Weight: 8 kg

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 12x drill bits Fedpsb A Im Eofx Akyopn -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Dimensions: 320/100/H100 mm -Weight: 8 kg

Condition: used, Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers Fedpfsdbhlqsx Akyspn -Diameter roller: 80 mm -Transport roller width: 800 mm -Total length: 830 mm -Sprocket: 1/2 "x 11 teeth -Thread: M8 -Number: 41x rolls available -Price: per piece -Weight: 4.1 kg/piece

Year of construction: 2012, operating hours: 0 h, condition: new, machine/vehicle number: 01312012-5, 7 axes simultaneous, control Fanuc 32i-A Manufacturing origin Taiwan Voltage 400/50/3 Netweight 2400 kg Custom position 8458.11 20 Dimensions 2605 x 1420 x 2150 mm TECHNICAL DATA : - max turning dia of main spindle 20 mm - max turning dia of sub spindle 20 mm - max turning length (fixed guide bush) 200 mm - max turning length (rotary guide bush) 85 mm (option : 150 mm) - max turning length (non guide bush) 45 mm - max drilling capacity of main spindle 10 mm - max drilling capacity of sub spindle 10 mm - max tapping capacity of main spindle M8 - max tapping capacity of sub spindle M8 - max cross drilling capacity 10 mm - max cross tapping capacity M6 - number of external turning tools 8 pcs - number of internal turning tools 5 pcs - number of cross drillings 4 (option : 7) - face tool holder (sub spindle) 4 pcs - size of tool 12 x 12 x 90 mm - number of axis controls 7 (X1/Y1/Z1/X2/Z2/C1/C2) - bore of spindle 29 mm - spindle speed range 200 ~ 8000 t/min - rapid traverse X / Z 24 m/min - main spindle motor 3.7 kW - sub spindle motor 2.2 kW - motor axis X1 / Z1 0.5 / 0.75 kW Fpjdpfod Hr Imex Akyon - motor axis Y 0.75 kW - cross drilling motor 0.75 kW - end drilling motor 0.75 kW - motor axes X2 / Z2 0.5 / 0.5 kW - coolant motor 0.375 kW - power requirement 15KVA errors and omissions excepted data gived without obligation Inventory nr. 1120009, standard accessories Spindle servomotor External tool holder (8-tool) Internal tool holder (5-tool) Parts catcher Tools & toobox Lighting device Non guide bushing holder Cutting coolant (pump 4T6-6) Lubrication device Operational manual Pressure pushing shank 2 sets Guide bushing x 1 (TD-25S type 16°) Collet chuck x 2 (TF-25 type 16°) Side drilling tool holder (7 tools) Sub-spindle Part conveyor Double C axis Fixed drilling tool holders for sub-spindle x2 Drilling and milling tool holder for sub-spindle External turning tool holder for sub-spindle Sub-spindle tool holder for 4-position excentric end drilling Cutting coolant inspection Formal CE Fixed guide bush holder (TD-25 S type 16°) Chip conveyor with cart Transformer Coolant chiller High pressure coolant blocks

Condition: good (used), Solar Fence | Solar Frame, used Total length: approx. 3,530 mm Total height: approx. 1,510 mm Modular system: The frame can be individually configured and adapted to the size of your solar modules, and can be extended at any time with additional elements. Consisting of EACH: 04 x A - Shelf upright, used Shelving system: Dexion Type: Speedlock P90 Material color: Sendzimir galvanized Frame profile: 100|25 Profile dimensions: 100x100x2.5 mm Adjustment grid: 50|50 mm Includes transverse and diagonal bracing, Base plates (182x147x6 mm) The uprights are pre-assembled (bolted truss) 1,510 mm high 610|200 mm deep 08 x Dexion leveling plate, new Type: P90U/PL120STD Material color: Sendzimir galvanized Dimensions: 167 x 182 x 1 mm 08 x Pallet racking crossbars, used Shelving system: Dexion Type: Speedlock P90 Material color: Sendzimir galvanized Box profile: 89 x 50 mm Crossbar type: SLO 089|2 Grapple: 5 HK 1,140 mm clear width 16 x Dexion locking pin, used Type: Speedlock P90 Material color: Sendzimir galvanized 04 x Square tube, new Design: hot-dip galvanized Customs tariff number: 73066192 Steel grade: S 235 / S 275 Cross-section: 50x50x2 mm Weight: 3.25 kg | per meter Length: 950 mm Notch on both sides: 50 mm 08 x Plastic distance sleeves M8, 20x30x8.5 mm, white, new 08 x Steel plate, new Dimensions: 42x50x1.20 mm Material color: Sendzimir galvanized 01 x Screws and fasteners Upon request, you will receive a completely coordinated photovoltaic system from our trading partner Erneuerbare Energien Ostfriesland with the following accessories: Growatt Neo micro-inverter 800 Watt incl. Wifi, incl. 5 m AC connection cable, new Growatt battery Noah 2000 Watt incl. Wifi (stackable up to 8 KW), new Fedezvlyxepfx Akyjpn Solar module DAS Solar Bifacial Full Black 450 Watt, new Photovoltaic cable 2 x 3 m 6 sq mm red/black incl. MC4 connector, new We will gladly establish contact for you. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: ready for operation (used), Year of construction: 2018, total height: 2,414 mm, total width: 1,110 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 500 mm, overall weight: 800 kg, product length (max.): 1,266 mm, number of axes: 3, This 3-axis Hexagon Tigo SF 05.06.05 was manufactured in 2018. It features a measuring volume of 500 x 580 x 500 mm and a granite measuring plate with high-precision linear ball bearing guideways. The machine supports a maximum workpiece weight of 150 kg and operates without the need for compressed air. If you are looking to get high-quality measurement capabilities, consider the Hexagon Tigo SF 05.06.05 CMM machine we have for sale. Contact us for further details. - Machine Structure: Cantilever design with steel frame construction- Overall Dimensions (X x Y x Z): 1110 x 1266 x 2414 mm- Table Specifications: Granite measuring plate (fixed desk) with M8 x 1.25 threaded inserts, flatness according to DIN 876/II- Guideways: High-precision linear ball bearing guideways- Measuring System: METALLUR scale, resolution 0.039 µm- Pinion/Ram Counterbalance: Steel spring- Max. Workpiece Weight: 150 kg- Compressed Air Requirements: No compressed air required (does not require compressed air, meaning no air compressor is needed!)- Dynamics (3D Speed): Max. 520 mm/s- Dynamics (3D Acceleration): Max. 1750 mm/s²- Scanning Speed: Max. 300 mm/s- Temperature Range for Guaranteed Uncertainty: 15 to 30 °C- Operating Temperature Range: 10 to 45 °C- Relative Humidity: 40% - 70% non-condensing- Temperature Compensation: Multi-sensor temperature compensation technology- Probe / Sensor Systems Compatibility: Equipped with LSP-X1c touch probe system (Max. probe weight: 33g; Max. probe length: Axial 125 mm, Lateral 60 mm); also compatible with TESASTAR-m M8 / TESASTAR-mp- Controller & Operating System: All-in-one system with integrated PC and controller in the base, adjustable arm mount for screen, keyboard, and lightweight jogbox- Advanced Software Modes: Fly2 Mode (trajectory optimization), Eco Mode (automatic shutdown) Fodpszufkbjfx Akyjpn

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,560 mm, travel distance Z-axis: 378 mm, number of axes: 3, spindle motor power: 13,200 W, spindle speed (max.): 24,000 rpm, This 5-axis BIESSE Rover PLAST A FT 1536 was manufactured in 2020, featuring a robust electro-welded base and high-precision movement systems. It boasts a main electrospindle power of 13.2 kW, a programmable rotation speed up to 24,000 RPM, and an 8-position revolver tool magazine. Ideal for intricate woodworking, it includes a 21.5" LCD monitor and Industry 4.0 integration. Consider the opportunity to buy this BIESSE Rover PLAST A FT 1536 CNC Wood Machining Centre. Contact us for more information. • Maximum piece clearance: 170 mm • Axis speeds: X 85 m/min, Y 60 m/min, Z 20 m/min • Base: Electro-welded closed-circuit structure with high-thickness steel plates • Axis drives: X with two independent brushless motors and helical rack & pinion; Z with preloaded ballscrew, ISO5 precision • Work table: Phenolic laminate with 30 mm grid vacuum system; vacuum steps every 150 mm; M8 threaded inserts for templates/fixtures • Main electrospindle: 13.2 kW (17.7 HP), HSK F63, air-cooled, 1,000–24,000 rpm • Tool magazine: 8-position revolver on Y-carriage; max tool diameter 110 mm; max tool weight 7.5 kg (32 kg total magazine) • Tool measurement: Digital presetter for tool length measurement up to 130 mm diameter • Control system: BH660 PC-based with Windows Real Time (WRT); CPU Intel Core i5 or better; 8 GB RAM; 128 GB SSD or better; 21.5" LCD monitor • Power supply: 380/400/415 V, 50/60 Hz • Automatic lubrication system for moving parts • Software: bSolid 3D CAD-CAM for design, simulation, and process management • Connectivity: Industry 4.0 integration via TCP/IP and OPC-UA Additional equipment • Vacuum pump: 250 m³/h, dry-running • Air conditioner for the electrical cabinet • Safety guarding: 2 m high protection nets and front vertical photocells Fjdpfx Akjzug N Sjyspn

Condition: new, thread dia. M5 - M24 turning speeds 70 - 200 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W Fpjdpfxoxaaybe Akyon weight 65,0 kg - with micro spray system for constant cooling & minimal Cooling lubricant consumption - Includes blow-out device to remove chips, ensuring optimal visibility on the borehole - Includes quick-change chuck for using taps for Through and blind holes - Swivel motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting, thread is guaranteed right angle (90°) - high productivity, significant time savings compared to manual Threading - Quick-change chuck with integrated slip clutch prevents breaking of the tap - Includes large radius swivel arm for easy positioning tap on the workpiece - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals scope of delivery - Operation via touchscreen - Digital drilling depth display - Micro spray system - Blow-out device - Quick change mount - Quick-change chuck according to DIN - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame 900 x 600 mm (Art. No.: Mounts: DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Fjdpfx Asw U Tlzskyspn Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 22,000 h, functionality: fully functional, Miyano BX-26S CNC Lathe – Double Spindle with Driven Tools TECHNICAL SPECIFICATIONS: Machining Capacities: - Maximum diameter: Ø 26 mm - Maximum working length: 67 mm (max. 250 mm) - Distance between centers: 330 mm - Bar capacity: Ø 28 mm Spindle System: - Configuration: Twin spindle (L-SP + R-SP) - Variable speed: 80 – 8,000 rpm - Both spindles feature identical specifications Tool System: - 2 linear turret-type tool slides - Slide No.1: 18 tool stations - Slide No.2: 7 tool stations - Total: 25 tool positions - Integrated driven tools - Drilling capacity: Ø 12 mm - Tapping capacity: M8 Performance: - Rapid traverse: 24 m/min (all axes) - Travels X1/Y1: 135/260 mm - Travels X2/Y2: 180/238 mm Fpodpfx Asxcp I Hjkyon - Travels Z1/Z2: 70/238 mm - Maximum push force: 3,325 N KEY FEATURES: ✓ High-precision Japanese Miyano technology ✓ Double spindle for maximum productivity ✓ Ideal for series production ✓ Integrated driven tools for complete machining operations ✓ Perfect for small to medium-sized precision components ✓ Excellent for bar stock machining Ideal applications: Precision components, special fasteners, automotive parts, connectors, electronic components, medical parts. A perfect machine for workshops seeking high productivity and precision in the machining of complex, small-sized components.

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 31,411 h, TRUMPF Trumatic 3000 K03 Punch-Laser Combination Machine The punch-laser combination machine enables the flexibility of laser cutting to be integrated with the advantages of punching. The combination of these two technologies opens up a wide range of new possibilities, allowing the manufacturing of even the most complex sheet metal parts. Technical Specifications: Fpjdpfx Aeycuypokyjn - Punching force: 165 kN - Maximum sheet size: (X, Y) 2500 mm x 1250 mm - Max sheet thickness: 3 mm - Maximum tool diameter: 76.2 mm - Maximum forming height: 25 mm - Maximum bending length: 55 mm - Chipless thread forming: M2.5 – M8 - Laser power: 2000 W - Number of tool stations: 18 - Tool change time (per tool): 3.9 s - Tool change time (MultiTool): 2.2 s - Positioning accuracy: ±0.1 mm - Repeatability: ±0.03 mm For optimal surface quality of sheet metal parts, the machine is equipped with a brush table and rollers surrounding the forming tools. The MultiTool stations can hold up to 180 different forming tools. Thanks to reduced production times and lower energy consumption, this punch-laser combination system offers a lower cost per unit compared to flatbed laser cutting machines, ensuring higher economic efficiency. This equipment is perfectly suited for efficient, high-volume production of complex sheet metal components. The integrated laser cutting head enables the creation of intricate shapes, delivers high-quality cut edges, and can be used when a specific profile punching tool is unavailable.

Condition: used, MFC – Digitally controlled gas mass flow controller, mass flow controller Elastomer-sealed mass flow controller, flow regulation, flow meter, flow controller, valve MKS Type GE250A-34328 Serial No. STD Model No. GE250A013255T6V3020 Fpsdpfx Akoz Ek Svoyen STD Serial No. Year of manufacture 2019 (New / unused in original packaging) Power connection +24VDC (M8 connector, 5-pin, male) Power consumption

Condition: excellent (used), Year of construction: 2018, Manufacturer: TEKNA Model: TKE 984-6 Design: RFT Year of manufacture: 2018 Machine type: CNC machining center with moving gantry Axes: 4 Suitable for: Drilling, milling, threading, and machining of aluminum, PVC, light metal, and steel profiles X-axis travel: 6,700 mm Y-axis travel: 1,350 mm Z-axis travel: 610 mm Swivel range of machining head: -90° to +90° Positioning resolution of swivel axis: 0.01° Fpodoz Er Hhepfx Akyen Electro spindle: 9 kW Max. spindle speed: 24,000 rpm Max. torque: 14.3 Nm Tool interface: HSK 63F Spindle cooling: Water cooling with chiller Clamping devices: 6 clamps Automatic positioning of the clamps via the X-axis Tool magazines: 3 fixed magazines Tool positions: 14 per magazine / total 42 tool positions Chip conveyor: Rubber belt chip conveyor, design 6,700 mm Measuring system: 3D measuring system for multiple scanning Additional tank for lubrication system: 15 liters Integrated cabin Separate electrical control cabinet Glass scale on the X-axis Customer-specific clamping device system for profiles X-axis with 2 motors in master/slave configuration Laser length measuring tool instead of the standard version 2 feed pipes for lubrication Multi-part machining Double-mode operation / machining in two work areas Parallel machining of two profiles possible Drilling capacity aluminum AL99: max. Ø 20 mm Drilling capacity steel FE370 D FF: max. Ø 14 mm Straight milling aluminum AL99: max. 15 mm material thickness Straight milling steel FE370 D FF: max. 5 mm material thickness Thread cutting aluminum: up to M12 Thread cutting steel: up to M8

Condition: excellent (used), Year of construction: 1980, Hot chamber furnace Chamber: 65 x 39 x 22 cm Power: 15.3 kW Max temperature: 1000°C Fsdpfx Akey E Izyoyspn Operating mode: electric

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Container and carton conveyor technology for e-commerce: Itoh Denki ordered and implemented by Rollo-Teufel. The conveyor line contains 5 workstations equipped with a computer, barcode scanner, and weight scale. The transport system comprises 3 levels of conveyor rollers. Each level has a motor for transporting goods, located in the rollers (24V), and sensors for position detection. The conveyor line is assembled from modular units. The units are connected with 4 screws (M8). The drive motors are powered by central INTERROLL modules, 5 pieces: MC 1-4 DR1FA2 MC 5-8 DR1FA3 MC 10-13 DR1FA4 MC 14-20 DR1FA5 MC 21-24 DR1FA36 Fsdpfx Aezz Ir Iokyopn

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, machine/vehicle number: H32023/1001, Production line for manufacturing empty capsules Consisting of: • Mixing tank for preparing HPMC solution • Dipping process system for capsule forming with drying tunnel • Cutting machine for capsule cap • Cutting machine for capsule body • Assembly machine • Sorting system with camera inspection and freely programmable individual reject • Compressed air system with refrigeration dryer and filtration system • Purified water system (under 10ppm) Fpjdpfxsyyq Tbo Akysn • Clean air system • Enclosed room with several compartments and airlock, 210 m² Turnkey solution including know-how transfer, installation, training, long-term consultancy, and technical service The system is commissioned and calibrated on-site. The plant is currently fully assembled and in production. Requirements: floor that is easy to clean, sufficient electrical power supply, adequate water supply, sufficient floor load capacity.