BIESSE Rover PLAST A FT 1536

BIESSE Rover PLAST A FT 1536

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Bsdpjt Hal Djfx Amrodh Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Bdjdpfjxaxr Nsx Amrsh Very low running hours - 1351 run hours Complete with three filter set

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Bdedpfx Amsy Iplforjh Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: good (used), Code: 0120 Brand: ORMAMACCHINE Model: NPC/3000S - CE Standard Hot press with diathermic oil for wood, veneer, wood panels, coated panels, veneer, composite materials, cork, aluminium and various materials - CE Standard Platen dimensions mm 3000 x 1300 Thrust ton 70 N° 6 pistons Opening mm 400 Motor Hp 2 Heating with diathermic oil by electric boiler Bjdpfx Aezil Ipsmrjdh Mylar-coated platens Overall dimensions: mm 3600 x 1550 x 1900 h Weight kg 3500

Condition: used, Year of construction: 2022, SCM Morbidelli N100 22-31 PROSPACE Year of manufacture: 2022 Condition: Used, recently serviced Machine type: CNC machining center Model: 22-31 PROSPACE Machine weight: approx. 4,000 kg Work table: Complete nesting table Technical data 3-axis CNC machining center 9.5 kW electric spindle HSK tool clamping system 13-position linear tool changer, automatic Drilling unit Complete work table for nesting applications 2 vacuum pumps Automatic tool length measurement TECPAD control panel SCM Maestro software 3 software licenses: Maestro Base Maestro Nesting Maestro Freeform Application areas Nesting Drilling Milling and contour machining Freeform machining Complete CNC machining of panels and components Included in the scope of supply Complete nesting table 9.5 kW electric spindle Drilling unit Bdjdpfxszwfivs Amrjh 2 vacuum pumps TECPAD control panel 13-position HSK linear tool magazine Automatic tool length measurement system SCM Maestro software with Base, Nesting, and Freeform licenses

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg Bdodpfxjw D T Dkj Amreh - available immediately -

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Bedpowuz Ekefx Amrodh Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: new, Year of construction: 2025, Motorized planer table with two speeds Digital display for work height Planer table made of gray cast iron The planer table is supported on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller pressure adjustable Front infeed roller with helical teeth Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planing cutter shaft Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Work table The work table is supported on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting device, the table position is maintained perfectly even without locking Helically toothed steel infeed rollers for a constant and uniform wood feed Second, rubber-coated feed roller at the outfeed Solid anti-kickback devices prevent workpiece kickback A 4-cutter shaft ensures an optimal planing result Dimensions and weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter, thickness 150 mm Drive power Main motor 9 kW Installation information Space requirement, length 1305 mm Space requirement, width/depth 1080 mm Space requirement, height 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Explanation of work area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 630 mm Planer table width 1000 mm Work height min. 3.5 mm Work height max. 300 mm Work length min. 210 mm Chip removal max. 8 mm Bdodsff Efajpfx Amroh Electrical data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Planing cutter shaft Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 630 mm Feed Speed 5/8/12/18 m/min Location: In stock, 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2007, machine/vehicle number: AA1/016112, functionality: fully functional, overall weight: 3,900 kg, table length: 3,050 mm, table width: 1,240 mm, Equipment: CE marking, documentation/manual, SCM RECORD 100 AL. 4 axis • 4 controlled axis: X, Y, Z y C X: 60 m/min Y: 45 m/min Z: 30 m/min • Aluminiun working table, nesting type: X: 3.050 mm Y: 1.240 mm • 2 working areas • 6 perimetral pneumatic reference cylinders • Vacuum pump BECKER: 250 m3/hour • Telecomand • XILOG PLUS software. Allows importing DXF files • Security fences • Security carpets • CE rules • Year 2007 ROUTER UNIT 8,5 kW / 11,5 HP 0 to 24.000 rpm Automatic Tool Change System HSK F-63 12 positions rotative tool magazine MULTIDRILL UNIT 7 vertical boring heads 1+1horizontal boring heads X 1+1horizontal boring heads Y 2.000 to 6.000 rpm SAW UNIT Cutting in X Diameter: 120 mm Bdjdpfx Ajzg H Sdemrsh 3.500 to 7.500 rpm

Condition: excellent (used), Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C, A axes: available Swivel machining: 2 working areas for swivel machining Work table: ATS-HTS-EPS Automatic console positioning system EPS 10 automatically positionable consoles 2 locating pins per console 5-axis milling spindle: Power: 9 kW / 11 kW at 60 Hz Speed: up to 24,000 rpm Tool holder: HSK-F63 Liquid-cooled Drilling head BH 26 16 vertical drilling spindles 4 horizontal drilling spindles in the X direction 2 grooving units for grooves in the X and Y directions Vertical drilling spindles 16, Horizontal drilling spindle X = Tool changer: Chain tool changer with 21 tool positions Clamping systems: Uniclamp clamping system - 6 pieces Bdsdpfx Aozxbhwomroh Control system: BIESSE XP 600 Chip removal: Motorized conveyor belts for the removal of chips and machining waste Vacuum pump BECKER: Motor power 5.5 kW Conveying capacity: 244/286 m³/h Additional equipment: Numerous vacuum suction cups; 6 UNICLAMP clamping systems; Numerous HSK 63 tool holders; 2 large saw blades in the tool magazine Compressed air: 7-7.5 bar Total power: 25.3 kW Weight: 4200 kg