Used Multispot M8 for sale (680)

Year of construction: 2017, condition: used, Wolf Bucket Separator TSP.124 is designed for heavy-duty continuous operation on construction sites, storage yards, or landfills. The bearings are maintenance-free and the chain boxes are filled with semi-fluid grease, which is distributed by the movement of the bucket and running of the chain to ensure lubrication at all points. This means the Terra-Star does not require re-lubrication and is maintenance-free. Ledpfx Abow U Utas Uoah The machine is equipped with M80X mixing shafts, and the tools in the wear zones are reinforced with hardfacing wire. Combined use on excavators and wheel loaders is easily possible. The adapter is not included in the price. For excavators from 18 t For wheel loaders from 10 t Weight in kg: 1850 Throughput: 52 - 77 m³/h Required drain line: 1 Series: TSP.124.022

Condition: good (used), Year of construction: 2011, Injection Moulding Machine Krauss Maffei KM 850-12000 MX Krauss Maffei LRX 500 Robot Year of Manufacture: 2011 Machine Description: Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV-controlled injection unit. MC 5 control system with color monitor, integrated control panel, and USB data storage. Plasticizing Unit: Complete plasticizing system for thermoplastics with a 135 mm diameter screw, Lsdpfsw Rdlqsx Ab Ujah shut-off nozzle, and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm Technical Specifications: Clamping Unit: Clamping force: 8,500 kN Mold opening force: 560 kN Platen size (H x V): 1600 x 1600 mm Tie bar spacing (H x V): 1140 x 1140 mm Mold opening stroke: 1600 mm Mold height (min–max): 500 – 1100 mm Daylight opening: 2100 mm Ejector stroke: 300 mm Ejector force: 200 / 100 kN Injection Unit: Screw diameter: 135 mm Injection pressure: 1389 bar Injection volume: 8588 cm³ Shot weight (PS): 6098 g Injection rate: 1414 cm³/s Electro-Hydraulic Equipment: Pump motor power: 132 kW Dry cycle time (Euromap 6): 965 cycles/h Oil tank capacity: 2440 l Dimensions and Weight: Net weight with control cabinet: 49 t Footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Condition: excellent (used), Year of construction: 2001, Injection Moulding Machine: Krauss Maffei KM 800-5000 MC Ledpsw U D I Tsfx Ab Ujah Year of manufacture: 2001 Software language: German Operating hours: 70,000 Clamping Unit Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Mould platen size (H x W): 1,610 mm x 1,530 mm Tie bar spacing (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector – stroke: 250 mm Injection Unit Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and Weight Dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tons

Condition: ready for operation (used), Year of construction: 2004, operating hours: 90,000 h, functionality: fully functional, machine/vehicle number: 90063, clamping force: 800 kN, screw diameter: 75 mm, clearance between the columns: 1,120 mm, displacement volume: 3,756 cm³, injection weight: 3,400 g, mold height (min.): 500 mm, opening stroke: 1,250 mm, plate height: 153 mm, total length: 11,100 mm, total width: 3,200 mm, total height: 2,580 mm, overall weight: 63,000 kg, input voltage: 400 V, input current: 308 A, Equipment: documentation/manual, 2-K, double nozzle, machine without handling Laedpsw U A Ufsfx Ab Uoh

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036943, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, is the perfect entry-level solution for all-electric injection molding, enabling fast and innovative responses to market demands. It combines high performance, straightforward operation, and short delivery times. This machine can be applied in a wide range of industries, such as packaging, electrical and electronics, medical technology, and automotive. Your benefits: – Optimized price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to the all-electric machine design – Fast delivery times enabled by the basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670020) CONTROL SYSTEM • MC P1 with 15" TFT color touchscreen with multitouch functionality CLAMPING UNIT • Clamping force: kN 800 • Max. mold opening force: kN 120 • Clearance (h x v): mm 470 x 420 • Mounting platen (h x v): mm 610 x 560 • Mold installation height min. - max.: mm 150 - 400 • Opening width: mm 750 Laedpsw Ur I Usfx Ab Uoh • Max. mold opening stroke: mm 350 • Ejector drive: electric • Ejector stroke: mm 100 • Ejector force forward/back: kN 22 / 22 • Ejector speed forward/back: mm/s 300 / 300 • Max. mold weight: kg 600 INJECTION UNIT • Screw diameter / type: mm 40 / Standard • Effective L/D ratio: 20.0 • Injection pressure: bar 1860 • Shot volume: cm³ 201 • Shot weight at max. stroke for PS: g 183 • Injection speed: mm/s 200 • Injection flow: cm³/s 251 • Screw drive / speed: rpm 334 • Plasticizing rate (standard): g/s 24.7 • Nozzle contact force: kN 34 ELECTRICAL PARAMETERS • Connected load: kW 20.6 • Installed heating power: kW 11.5 • Power supply: V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: t 5.6 • Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT • Low-wear plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Electrical interface for cascade control, 4-fold • Euromap interfaces for handling: E18, E63 • Euromap interface (central computer): E67, E77 • Water manifold, 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression molding function • Graphic analysis package The machine is located at our factory in Parsdorf and is available at short notice. Further additional options can be offered upon request. We look forward to your inquiry.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, actuation type: electric, bending force (max.): 80 t, working width: 2,500 mm, input voltage: 380 V, Equipment: foot remote control, safety light barrier, Well-equipped machine with touchscreen CNC control Ledpfx Aew Ulq Neb Usah

Condition: used, Year of construction: 2012, functionality: fully functional, power: 800 kW (1,087.70 HP), nominal power: 640 kW (870.16 HP), rotational speed (max.): 1,500 rpm, type of cooling: air, color: blue, output voltage: 400 V, output current: 1,155 A, nominal power (apparent): 800 kVA, output frequency: 50 Hz, Rotary UPS System – 800 kVA – Marelli + Rotabloc Availability: In stock (2 units) Location: UK High-quality Rotary UPS System with integrated components: ✅ Marelli Generator – MJB 400 LB4 B2 ✅ Rotabloc Alternator – ALT-800 ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs Marelli Generator 800 kVA 400 V / 480 V – 50/60 Hz 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy (2012) Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Flywheel (ACC-1000) 800 kW Drum speed: up to 3000 rpm Weight: 5250 kg Made in Belgium Lajdpfx Aowuyzweb Ujh ✅ Advantages No batteries required – flywheel technology Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Condition: used, TECHNICAL DETAILS - part holder spindle speed : 1500 [Rpm] - tool holder spindle speed : 3000 [Rpm] - max part Ø : 50 [mm] - dimensions : 2820 x 2400 x 2500 [mm] - weight : 4200 [kg] EQUIPMENT Lasdouhbp Eopfx Ab Ueh - CN SIEMENS 840D - STAUBLI robot 6 axes TX60 with CS8C control - deburring device

Condition: used, Year of construction: 1988, Janssen biscuit machine with 2 biscuit rollers for Speculaas and Kipfel. Includes 10 baking trays. The machine has been overhauled. Stainless steel frame on wheels. With heating for the rollers. Tray width: 25 cm; lengths: 1 m, 80 cm and 60 cm. Lodpfx Absw T Rxcj Uoah

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 6,600 mm, total width: 1,000 mm, total height: 2,500 mm, input voltage: 380 V, I. SINGIP PERIPHERAL GLASS GRINDER MODEL SZM 8 Lsdpfxjw T Rpho Ab Usah Peripheral glass grinder manufactured by SINGIP (China), model SZM 8 (featuring 6 peripheral wheels), production date November 2021 – designed for grinding the edges of flat glass of various sizes and thicknesses. The first three diamond wheels are used for coarse and fine grinding, while the remaining three wheels are for glass polishing. Depending on the selected wheel set suitable for the glass thickness, the desired edge profile can be achieved (C-edge or Pencil edge). The grinder is in very good condition, ideal for rapid processing of glass with consistent thickness, currently dismantled. Model: SZM 8 Minimum workpiece size: 100 x 100 mm Glass thickness: 3–12 mm Processing speed: 0.5–2.5 m/min Dimensions (length*width*height): 6600 x 1000 x 2500 mm Installed power: 16 kW Power supply: 380V, 50Hz

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS Lodsuggb Djpfx Ab Uoah  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Year of construction: 2023, operating hours: 460 h, condition: like new (used), functionality: fully functional, Stokkermill M-80 Cable Granulation Plant – Year of Manufacture 2023 – Only 460 Operating Hours We are offering a near-new Stokkermill M-80 cable recycling plant for sale. The machine has been maintained regularly and has only 460 operating hours, thus it is practically in mint condition. Technical Data & Performance: Year of manufacture: 2023 Operating hours: 460 h Power: 147 kW (installed) Power supply: 400 V – 50 Hz Input capacity: 400–600 kg/h (copper-containing cables, depending on material quality) Main unit weight: approx. 6,300 kg Plant Components: Pre-shredder PS800/260R (22 kW) M80 Multiflex granulator with cutting system Zig-zag separator, turbo refiner, dry separation table Conveyor belts and screw conveyors Vibratory sieve for plastic fractions External dedusting and filtration system Special Features: Very low energy consumption due to power reserves Efficient copper/aluminum recovery Compact design with state-of-the-art separation technology Complete documentation and maintenance history available Serviced and immediately ready for operation Price: 160,000 EUR Location: Switzerland Ledpfx Abow T Rgto Usah Warranty: 2-year manufacturer’s warranty, valid until March 2026 Incoterm: FCA – Free Carrier (named place) – The machine will be loaded onto the buyer’s transport vehicle. From the point of handover, the buyer assumes all risks as well as transport and insurance costs.

Condition: like new (used), mileage: 84,000 km, Year of construction: 2022, FIAT DUCATO L3H3 YEAR 2022 TOTAL LENGTH 6 METERS KM 84000 ENGINE 2200 140HP AIR CONDITIONING REVERSING CAMERA STEERING WHEEL CONTROLS SINGLE OWNER SERVICED WARRANTY 1 YEAR Lasdpfxeu Dir Ae Ab Ush POSSIBILITY OF FINANCING

Condition: used, machine/vehicle number: 006530, Max. machining width: 1300 mm Lajdjwcybmopfx Ab Ueh Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 8 Nr

Condition: used, functionality: fully functional, Year of construction: 1991, Marini M80 Asphalt Mixing Plant Mixer: 1 t / approx. 80 t/h Mixing tower Elevators Drum dryer with gas burner Complete filter installation 10 x dosing units with conveyor belts 2 x bitumen tanks Lsdpfx Ajw Trpiob Usah Loading silo approx. 120 t Control system in container Immediately available!

Condition: used, Year of construction: 1982, Used machine Laodsw I Ulpspfx Ab Ueh Condition: good Equipment and technical data: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Main motor kW: 1.8 Pneumatic clamp Rear fence Weight approx. kg: 400 Location: Hochheim Availability: short term

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard Ledpfxoud H Dmo Ab Usah  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 20, warranty duration: 12 months, total height: 2,180 mm, total width: 3,060 mm, total length: 3,170 mm, SLIDING RACK FOR GLASS M80-20 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. Laodpjf S Hhaofx Ab Uoh M80-10 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -20 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 306 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 18 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 18000 kg Partitions inclination – left or right – depending on assembly Assembly time - 7 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-20 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: used, mileage: 140,204 km, power: 309 kW (420.12 HP), first registration: 06/2019, overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space volume: 8 m³, Equipment: ABS, air conditioning, Stetter AM 8 FHCBL concrete mixer with Theam Rotatheam T3D16 conveyor belt (year: 2019) Stetter with 500 l water tank Theam Rotatheam T3D16 conveyor belt, belt length from 6.3 m to 15.8 m, belt width 360 mm, maximum discharge rate 70 m³/h, belt rotation 310°, maximum discharge height 7 m. Truck Leaf suspension Reinforced engine brake 2x differential lock Steel fuel tank: 300 l Cabin equipment: Automatic climate control, Number of seats: 2, Manually operated sliding sunroof, Electric windows, Electrically heated exterior mirrors, Central locking, Refrigerator, Radio, Digital tachograph, Comfort driver's seat, heated Rear window heating in the cab, Lsdpfx Aewv Alzsb Ueah Exterior equipment: Sun visor, Fog lights, Warning lights (beacons): 2x, Toolbox Tyres: 1st axle: 385/65 R 22.5 2nd axle: 385/65 R 22.5 3rd axle: 315/80 R 22.5 4th axle: 315/80 R 22.5

Condition: excellent (used), Year of construction: 2014, Aerzen blower stage after complete overhaul. 12 months warranty. Lsdpev Rmnwofx Ab Usah

Condition: refurbished (used), Aerzen GM80L blower after complete overhaul. Lasdpfx Abew Smvnj Uoh

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,481 h, laser power: 60 W, working range: 1,300 mm, A CO2 laser cutting machine of the Eurolaser brand and type M-800 is for sale. This laser is suitable for both cutting and engraving The machine is fully functional with few operating hours Technical data: Materials to be processed: plastic, acrylic, wood, fabric, stone, composite materials, paper, cardboard, glass, ceramics Operating hours: 5481 Year of construction: 2018 x-stroke: 1300 mm y-stroke: 830 mm Cutting height: min. 15 mm, max. 55 mm Cutting speed: min. 0.001 m/s, max. 1.414 m/s Laser power: min. 60 W, max. 450 W On request, transportation and loading can be arranged at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website Ljdpfx Asup N Dhjb Usah

Year of construction: 2022, condition: new, ZIM 820 Concrete Pavers and Block machine can operated semi automatically with the control of the operator. Upon request, it can be manufactured fully automatic with PLC control. By changing moulds all kinds of pavers stone , curbs, block and precast concrete elements such as grass pavers series can be produced in a serial way. 20cm block can be produced 8 units in one press with the machine,or 20 interlock stones can be produced in a press. Machine is able to produce the insulated block upon demand. Our company’s special production vibrator is used. Thus, it can produce smoothly and quickly. Collector Robot (cuber) can be used to empty the dried products on the production pallets. Ljdpfx Aboia N Ids Ueah A model with a single hopper, ZIM 8, is also available for manufacturing single layer bricks/pavers, hollow block, and for special blocks/pavers.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit Ledpfx Ajr Axlvsb Usah working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: like new (used), Year of construction: 2020, Clamping force: 88 t Screw: 36 mm Laedpfx Aovx Uywjb Ueh Shot weight: 167g /PS