Used Multiple Boring System for sale (44,845)

Condition: used, This listing is for the Agilent Cary 1260 infinity HPLC system The units are in full working condition and are ready for immediate use The Agilent Cary 1260 Infinity HPLC system is a robust and versatile high-performance liquid chromatography platform engineered for reliability, high throughput, and analytical precision. It's widely used in pharmaceutical, environmental, food, and chemical analysis The system's modular architecture allows for tailored configurations, enabling users to select components such as pumps, detectors, and sample managers to meet specific analytical needs. This flexibility facilitates upgrades and maintenance, ensuring the system can evolve alongside technological advancements and changing laboratory requirements. This combination includes the following part Nos. G7111A Quat Pump G7111 Purge Valve G7129A Vial Sampler G7115A Diode Array Detector G7115 Preparative Flow Cell Hsdpfoxv A Slox Adxjfl 160 Infinity R1 Detector Pressure Range: Up to 600 bar, accommodating smaller particle size columns for higher resolution and faster separations. Supports a wide flow range, up to 10 mL/min at 200 bar, suitable for standard to semi-preparative applications. Injection Volume: Flexible injection volumes ranging from 0.1 µL to 1800 µL, depending on the configuration and options selected. Column Capacity: Supports up to four columns with direct access to each column through a Quick-Change switching valve, enhancing flexibility and eliminating the need to disconnect and reconnect columns. Temperature Control: Features efficient column handling and temperature control, with options for multiple temperature zones, ensuring optimal conditions for various applications.

Condition: used, Year of construction: 2021, functionality: fully functional, Extraction ducting, purchased on March 24, 2021, for the wood workshop extraction system. Piping/ducting system for connecting multiple woodworking machines to a central or decentralized extraction system. Total length of ducting (approximate dimensions): 300 mm pipe diameter → approx. 20 m 250 mm pipe diameter → 1.5 m + approx. 7 m hose 200 mm pipe diameter → approx. 2 m 160 mm pipe diameter → approx. 18 m 140 mm pipe diameter → approx. 1.5 m 120 mm pipe diameter → approx. 5 m 100 mm pipe diameter → approx. 6 m Extraction flaps: 300 mm → 1x 250 mm → 1x 160 mm → 4x 140 mm → 1x 120 mm → 2x 100 mm → 2x Key technical data: - Machine type: Extraction ducting / piping system for chip and dust extraction - Application area: Connection of woodworking machines, extraction points, and extraction system - Function: Collection and removal of wood chips and dust from the workshop - System components: Pipes, elbows, branches, dampers, brackets, and connecting pieces Hfsdpfszuyz Isx Adxel - Material / design: Workshop ducting for stationary extraction technology - Use: Connection of multiple machines such as saws, planers, milling machines, and sanding machines - Advantage: supports a clean, safe, and efficient workshop operation - Particularly interesting in combination with an extraction system or for workshops under construction/renovation - Relevant accessory package for multiple stationary machines - Useful addition for woodworking shops, carpentry shops, training workshops, and makerspaces No warranty

Condition: used, System Overview A complete, cGMP-compliant Water for Injection (WFI) generation and storage system. Produces high-purity, endotoxin-free water for pharmaceutical and biotech applications via multiple-effect distillation. This item can be crated and shipped internationally. Please contact us for a quotation Hjdpfxjxqq Dxs Adxefl ----- Main Components - Finn-Aqua 200-S3 Distillation Unit – three-effect evaporator/condensers with falling-film design, pyrogen separation, and continuous blowdown. - 600 L WFI Storage Tank – 316L stainless steel, atmospheric vent filter, level and temperature sensors. - 600 L Jacketed Holding Tank – 316L stainless steel, insulated, steam/hot water jacket for temperature control. - WFI Distribution Pump – sanitary centrifugal pump for loop circulation. - Utility Connections – plant steam (3–8 bar), cooling water, feed water, condensate return, and instrument air. - Instrumentation – pressure, temperature, conductivity, and level transmitters with safety and relief valves. - Control Panel – PLC-based automatic operation, alarm handling, data logging, and local/remote control. ----- Key Features - Multi-effect distillation for high purity and energy efficiency. - Degassing and three-stage separation for endotoxin removal. - Fully stainless, drainable, and sanitary construction. - Compact, skid-mounted design with integrated utilities. - Designed for validation and GMP compliance (USP/EP WFI quality).

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4304, rotary table diameter: 600 mm, grinding height: 450 mm, overall weight: 14,500 kg, Machine is equipped with 3 spindles, surface grinding, external grinding, bore grinding Hedpfx Asvt A Rtsdxofl Turret head B-axis with 1° division Belt filter system included

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, spindle speed (max.): 3,250 rpm, overall weight: 7,600 kg, controller manufacturer: Heidenhain, TECHNICAL DETAILS Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Turning length: 1,050 mm Maximum spindle speed: 3,250 rpm Spindle bore: 76 mm Torque at 40% duty cycle (ED) max.: 630 Nm Hfsdpfxez Apduo Adxol Torque at 100% duty cycle (ED): 420 Nm Number of tool positions in tool turret: 12 stations Chuck diameter: 250 mm Maximum workpiece weight between centers: approx. 350 kg MACHINE DETAILS Control system manufacturer: Siemens Spindle power at 40% duty cycle (ED): 33 kW Spindle power at 100% duty cycle (ED): 22 kW Electrical connection: approx. 50 kVA Mains connection: 400 V Frequency: 50/60 Hz Dimensions & Weight Dimensions with chip conveyor: approx. 5,300 × 1,900–2,200 × 1,700–2,000 mm Machine weight: approx. 7,500 kg EQUIPMENT Chip conveyor

Condition: good (used), Year of construction: 1995, CNC Wire EDM Machine AGIE AGIECUT 270 SF+F HSS Year of manufacture: 1995 Travel in X-axis: 350 mm Travel in Y-axis: 250 mm Travel in Z-axis: 256 mm Travel in U/V axes: ±70 mm Positioning resolution: 0.0001 mm Positioning accuracy: approx. ±3 µm Machining data Max. taper: 30° at a workpiece height of 100 mm Surface finish: up to approx. Ra 0.2 µm with multiple finishing passes Workpiece data Workpiece size, max. dimensions: 750 × 550 × 250 mm Workpiece weight, max.: 450 kg Wire system Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Wire tension: CNC-controlled MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Dimensions & Weight Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Hjdpfx Adjzzyhnsxjfl Machine weight: approx. 3,600 kg EQUIPMENT Fully automatic wire threading

Condition: excellent (used), Year of construction: 1991, Keyway broaching machine Elmass, suitable for keyways up to 14 mm wide. Maximum working stroke 200 mm. Thanks to the bore-guided tool, this Elmass system can also be used to broach extra-long keyways. Tools for standard bores with diameters of 6-50 mm and keyway widths of 2-14 mm are available. Hodpfeld S S Sox Adxjfl This tool system is also suitable for blind hole drilling. Thanks to the 400 mm rotary table, multiple keyways can also be broached.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, L & Z Lathe / Bickenbach LE-20-10-S incl. 3-axis digital display -Very well-maintained, original condition from an educational institution -CE marking -Year of manufacture 2008 -Three-axis digital display -Turning diameter 420 mm -Turning diameter over the carriage 250 mm -Turning diameter in the crotch 580 mm -Turning length 1000 mm -Spindle speed range (gearbox) 20 - 2000 rpm -Spindle bore 58 mm -Tailstock taper MK 4 / quill travel 130 mm -Röhm 3-jaw chuck 250 mm & quick-change jaws -Fixed steady rest -Multifix base holder & 3x inserts -Coolant system -Folding protective device for tool holder Hedpozvpxxjfx Adxjfl -Electric chuck guard -Foot brake -Swivel machine lamp -Follower (Röhm) -Machine feet -Bed stop -Chip guard -Emergency stop -Operating tool Dimensions: L x W x H 2.1 x 0.8 x 1.7 meters / Weight 1600 kg Errors and omissions excepted.

Condition: good (used), portable oxygen breathing apparatus for tunnel boring -for: Herrenkecht tunnel boring machine -System-No: 009-07-06 -in: 2x aluminum cases -various hoses -Transport weight: 100 kg Hodpfxob A Ibzj Adxjfl

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Hodpjyzc Rujfx Adxsfl

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning length: 196 mm, turning diameter over cross slide: 130 mm, spindle speed (min.): 6,000 rpm, bar diameter (max.): 36 mm, overall weight: 1,900 kg, Equipment: documentation/manual, Yamazaki Mazak QT-6T CNC Turning Center – Excellent Condition We offer for sale a well-maintained Yamazaki Mazak QT-6T CNC Turning Center, manufactured in Japan and kept in excellent mechanical and operational condition. The machine is currently under power, in production, and available for inspection and testing upon appointment. Machine Information - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of Manufacture: 1999 - Serial Number: 39178 - Country of Origin: Japan - CNC Control: Mazatrol - Configuration: 2-Axis CNC Turning Center (X / Z) - Machine Weight: Approx. 1,900 kg Main Features - 6" Chuck - Collet Chuck - Complete Set of Collets Included - Bar Capacity up to 36 mm - 8-Station Turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant System - Fully Operational Included Equipment - Fedek Bar Feeder - Bar Feeder Length: 1.5 m - Pneumatic Bar Pushing System - 6" Chuck - Collet Chuck - Complete Set of Collets - Full Set of Tool Holders - Original Manuals and Documentation - Various Accessories Additional Equipment Included The machine is supplied with the complete set of spindle protection plastic tubes (bar guide tubes), allowing safe operation with bar stock and minimizing vibration, noise, and bar whipping during spindle rotation. This contributes significantly to machining stability, surface finish quality, and spindle protection when running long bars. Technical Specifications - Maximum Turning Diameter: Approx. 130 mm - Maximum Turning Length: Approx. 196 mm - Spindle Bore: Approx. 45 mm - Maximum Spindle Speed: Up to 7,000 rpm - Bar Capacity: 32–36 mm - X-Axis Travel: Approx. 80 mm - Z-Axis Travel: Approx. 200 mm - Rapid Traverse X/Z: Up to 30 m/min Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ Machine under power ✔ Ready for immediate production ✔ Inspection and test run possible Hjdpfx Ajzal Rajdxofl ✔ All manuals and documentation available Additional Information This machine is offered as a complete production package and is ideal for precision machining of bar stock, small and medium batch production, and high-accuracy turning applications. The machine comes with extensive tooling, collets, holders, automatic tool setting, automatic parts catcher, bar feeder, and spindle guide tube system, allowing immediate integration into production with minimal additional investment. Loading assistance is available. Videos of the machine running can be provided upon request.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, spindle bore: 40 mm, turning diameter over bed slide: 330 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, overall weight: 700 kg, TECHNICAL DETAILS Center distance: 635 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 210 mm Swinging diameter in the gap: 480 mm Toolmaker's accuracy: DIN 8605 Main spindle bore: 40 mm Spindle mount: DIN 55029 D1-4 Speed steps: 12 Speed range: 40–2,500 rpm Taper in tailstock: MK 3 Tailstock quill travel: 110 mm Longitudinal feeds: 0.03–2 mm/rev Cross feeds: 0.015–1 mm/rev Metric threads: 0.2–14 mm Whitworth threads: 2–56 threads per 1" MACHINE DETAILS Hodpfx Aszz Rm Iedxsfl Drive power: 2.2 kW Dimensions & Weight Dimensions (L × W × H): 1,700 × 1,000 × 1,400 mm Weight approx.: 700 kg EQUIPMENT 2-axis digital read-out ACU-RITE® DRO 203 Quick-change tool holder MULTIFIX Chip collection tray with front opening flap Adjustable tool holder guard Rear splash and chip guard Chuck guard Spindle cover Removable bridge Coolant system Work area lighting Threading dial Foot brake with brake pedal over the entire length Operating manual with CE declaration of conformity

Year of construction: 2014, condition: used, This listing is for a 3M Zeta Plus 16EZA Encapsulated System Holder The unit is in excellent working condition and is ready for immediate release. The 3M Encapsulated System Holder is engineered to support Zeta Plus depth filtration and related downstream purification processes with optimal ergonomics, hygiene, and operational efficiency. It is specifically designed for biopharmaceutical and biotechnology applications where sterile, high-throughput filtration is required. This system holder accommodates encapsulated filter capsules—eliminating the need for a stainless-steel housing—and offers a pivoting, ergonomic frame that enhances operator safety and eases filter change-outs. Key Features Pivoting Holder Design – The housing pivots between horizontal (waist-height) for loading/unloading and vertical for filtration mode, reducing operator strain and minimizing fluid spills during replacement. Vertical Flow Path Retained – Preserves the proven vertical flow design ideal for depth filtration with 3M Zeta Plus filters and compatibility with 3M polisher or chromatographic clarifiers. Torque-Limiter Sealing – Built-in torque limiter ensures the capsule shell is properly sealed before operation, protecting against leaks or misassembly. Encapsulated Shell Architecture – Eliminates the need for an external stainless-steel cartridge housing, thereby reducing facility clean‑in‑place (CIP) or validation overhead. Shell Options – Offers translucent polycarbonate shells for visual liquid level monitoring or polyphenylene oxide shells capable of sterilization and sanitization. Multiple Flow Configurations Supported – Enables Bottom-In / Bottom-Out and Top-In / Bottom-Out modes to optimize media usage and filter performance. Scalable Modules – Available in pilot and full-production configurations, facilitating scale‑up from lab to manufacturing scale within a unified system design. Technical Specifications Parameter Description Hfjdpfx Asxl Dy Njdxsl Model / Part No. Housing 16EZA1 Flow Path Vertical flow design, compatible with multiple flow directions Shell Materials Polycarbonate or polyphenylene oxide options (sterilizable) Holder Orientation Pivoting between horizontal (load/unload) & vertical (operational) Sealing Mechanism Torque‑limiter style sealing indicator Operational Scale Supports systems from small pilot scale up to production scale (0.5 L to >2,500 L) Filtration Compatibility 3M Zeta Plus depth filters, 3M Polisher ST, 3M Emphaze AEX Hybrid Purifier, 3M Harvest RC, etc. Footprint Compact vertical footprint; reduced spatial demand in filtration suites Applications Clarification of mammalian cell cultures prior to downstream purification Protection of downstream membranes and chromatography resins via depth filtration Clarification of bacterial, yeast, or insect cell lysates Removal of host cell proteins (HCP), DNA, endotoxins, and particulates Pre‑polishing or polishing after capture chromatography Viral clearance modes in downstream workflows Benefits & Value Proposition Enhanced Ergonomics & Safety – The pivoting design reduces the need to lift used capsules overhead, lowering risk of spills and operator fatigue. Lower Validation Burden – Because the system is fully encapsulated, no external housing cleaning or validation is needed in the customer’s site. Operational Versatility – Flexibility in shell types, flow configurations, and scale continuity from pilot to production. Visual Process Monitoring – Translucent shell...

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Hfjdjz Abkyopfx Adxsl

Condition: used, Year of construction: 2015, Colour: White Weight: 4.000 kg - Year: 2015 - Documentation available: Yes - └ Type Documentation: Technical data, Assembly manual, User manual, Operating system - CE marking present: Yes - CE certificate present: No - Serial number: AE/034421 - Main motor power [kW]: 9.0 - Software: Wincut 12.2.9 - Saw blade bore diameter [mm]: 80 - Max. saw blade diameter [mm]: 320 - Max. cutting length [mm]: 4150 - Max. cutting width [mm]: 2200 - Max. cutting height [mm]: 67 - Spindle speed: - └ Min. spindle speed [rpm]: 1000 - └ Max. spindle speed [rpm]: 5000 - └ Spindle speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 21 - Fuse [A]: 32 - Power [kW]: 8.4 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Hfjdjzzb I Nspfx Adxol Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2018, spindle bore: 140 mm, turning diameter over bed slide: 1,100 mm, center width: 4,000 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 4 rpm, overall weight: 14,500 kg, Turning lathe, manufacturer: FAT HACO, type: TUR SMN 1100 x 4000 Year of manufacture: 2018, serial number: 180529, control system: SIEMENS 840 D SL, distance between centers: 4,000 mm, swing diameter over bed: 1,100 mm, swing diameter over cross slide: 790 mm, max. workpiece weight between centers: 4,000 kg, spindle speed: 4 to 1,200 rpm, spindle bore: 140 mm, drive power: 33 kW, machine weight: 14,500 kg. The standard equipment of the machine includes an 8-position VDI turret, a hydraulic steady rest, an automatic gear change, a coolant system, a hydraulic unit, an automatic lubrication system, work area lighting, a USB port, and CE-compliant design. Hfsdpfxezvwmqe Adxjl

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: AB-216795, functionality: fully functional, planing width: 230 mm, spindle diameter: 40 mm, number of spindles: 5, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of spindles: 5 pcs. Min. planing width: 25 mm Max. planing width: 230 mm Min. planing height: 6 mm Max. planing height: 120 mm Infeed table length: 2,470 mm Spindle 1 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 2 Spindle type: Right Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 3 Spindle type: Left Motor power: 7.5 kW Spindle diameter: 40 mm Hjdpfszxchlex Adxjfl Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 4 Spindle type: Top Motor power: 9 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 5 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 140 mm Feed rate: Automatic Min. feed rate: 5 m/min Max. feed rate: 25 m/min Feed rate control: Variable Conveyor motor power: 3 kW Conveyor drive: Cardan shaft drive Diameter of feed rollers: 140 mm MACHINE DETAILS Lubrication system: Manual Diameter of dust extraction nozzle: 120 mm Voltage: 400 V Current consumption: 57 A Fuse rating: 63 A Power: 10 kW Dimensions & Weight Dimensions (L x W x H): 4,150 x 1,650 x 1,750 mm Dry weight: 2,600 kg Transport packages: 1 pc. EQUIPMENT CE marking Documentation Cardan shaft drive Manual lubrication system

Condition: ready for operation (used), Year of construction: 1973, functionality: fully functional, machine/vehicle number: 162 026, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, table load: 15,000 kg, TECHNICAL DETAILS Hfsdpez Ahabsfx Adxjl Travel range, X-axis: 3,000 mm Travel range, Y-axis: 2,000 mm Travel range, Z-axis: 1,250 mm Travel range, W-axis (spindle stroke): 700 mm Table size: 2,000 × 1,500 mm Table load capacity: 15,000 kg Table rotation: 360° Table indexing: 1° Spindle speed: 8–800 rpm MACHINE DETAILS Position measuring system: Heidenhain linear scales EQUIPMENT Heidenhain linear scales

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,500 rpm, position of the milling head: Testa ad assi ortogonali indexati - TTL2 25 360, spindle diameter: 180 mm, travel distance W-axis: 1,000 mm, table load: 100,000 kg, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, table length: 3,000 mm, table width: 3,500 mm, quill travel distance: 2,500 mm, quill diameter: 180 mm, spindle stroke: 1,000 mm, workpiece weight (max.): 100,000 kg, torque: 9,050 Nm, CNC BORING MACHINE PAMA mod. SPEEDRAM 2000 Hydrostatic CNC Control: Siemens Sinumerik 840D Axis X: 13,000 mm Axis Y: 5,000 mm Axis Z: 1,200 mm Axis W: 1,000 mm Total axial travel (Z+W): 2,200 mm Working feed on all axes: 8,000 mm/min Rapid traverse on all axes: 20,000 mm/min Spindle: Hfsdpfjyxg Hbsx Adxel Boring spindle diameter: 180 mm Spindle carrier ram dimensions: 400 x 440 mm Spindle speed (3 ranges) max: 2,500 rpm Spindle power (S1): 91 kW Spindle nominal torque (S1): 9,050 Nm Spindle internal taper: ISO 50 DIN 69871 AD-Type Big Plus Orthogonal axis indexed head – TTL2 25 360 Tool taper: ISO 50 DIN 69871/2 AD-Type Big Plus Max spindle power: 25 kW Max spindle speed: 2,500 rpm Speed ratio: 1:1 Spindle indexing: +/- 100°, 200 positions per 1° Head indexing: +/-180°, 360 positions per 1° Max spindle nominal torque: 1,000 Nm TH 100 rotary-travelling table: Table dimensions: 3,000 x 3,500 mm Table load capacity: 100 Ton Central T-slot size: 36h7 mm Lateral T-slot size: 36h12 mm T-slot pitch: 320 mm Longitudinal travel V-axis: 2,500 mm Feed/rapid traverse V-axis: 10,000 mm/min Chain-type tool magazine with 80 tools (capacity CU 145 R80) Machine weight approx. 160/165 Ton Complete with: - Hinged belt chip conveyor - No. 02 side chip conveyors for rotary table - Fixed closed accessory magazine with 2+1 positions - Fixed tool rack (ISO50, 6 positions) - Internal and external tool coolant system, 30 bar - Wireless workpiece probe (Renishaw) USED MACHINE YEAR: 2009

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading Hfsdpexwlmuofx Adxol - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle diameter: 130 mm, spindle speed (max.): 1,500 rpm, table length: 1,800 mm, table width: 1,600 mm, feed length W-axis: 600 mm, TOS Varnsdorf WHN 13 A table type horizontal boring mill (borer), year of construction 1982. The machine has been retrofitted with a FANUC CNC control; maximum spindle speed 1,500 rpm. Well maintained and in working condition. Technical data: - Table size: 1,600 x 1,800 mm - X travel: 3,500 mm - Y travel: 2,000 mm - Z travel: 1,000 mm Hodpfx Adoz An Ufexjfl - W travel (boring spindle / quill): 600 mm - Spindle diameter: 130 mm - Max. spindle speed: 1,500 rpm - Control: FANUC (retrofit) Available for inspection in our workshop and ready for immediate delivery.

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AK2-SCBS201, input current: 230 A, For sale is a used ELS labeler/labeling station with a conveyor belt. The machine was acquired by us after we installed our own labeling system on our thermoforming packaging machine. The labeler was subsequently completely overhauled and tested for functionality. The system is mounted on a sturdy stainless steel/aluminum frame and features an integrated conveyor belt. The photos show labeling heads, roll holder, control panels, sensors, and mechanical adjustment options for adapting to different products or packaging. Data / Features: Hfedpfx Aozkucfjdxol Manufacturer: ELS Type / Designation according to nameplate: AK2-SCBS201 Machine no. according to nameplate: 16615 / 2024 Labeling station with conveyor belt Height and position adjustment Stainless steel / aluminum construction Control panels on the labeling head Sensors included Completely overhauled Function tested Condition: used, ready for operation The machine is suitable for use in packaging lines, e.g., for labeling packaged products, trays, boxes, or similar items. Before use, the system should be adjusted to the specific product and adapted to the corresponding label format. Note: Technical data such as label width, label length, belt width, connection values, and exact dimensions can be requested separately if needed or checked on-site. Inspection and testing possible by appointment. Errors and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 730 mm, turning diameter: 400 mm, spindle bore: 66 mm, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS Travel in X-axis: 240 mm Travel in Z-axis: 640 mm Turning length: 730 mm Turning diameter: 400 mm Spindle speed: 4,000 rpm Spindle bore: 66 mm MACHINE DETAILS Control system: Siemens Machine weight, approx.: 5,500 kg EQUIPMENT Automatic tool changer (ATC) Hfedpfx Adoz Ahybsxsl Tailstock Parts catcher

Year of construction: 1967, condition: used, Swing over bed: 540mm, swing over carriage: 280mm, max. cross slide travel: approx. 410mm, max. compound slide travel: approx. 140mm, tailstock quill travel: 225mm, main spindle speed steps: 24, spindle speed: 9-1400rpm, 32 longitudinal feeds: 0.063-2.24mm/rev, 32 cross feeds: 0.032-1.12mm/rev, metric thread pitch: 0.25-560mm, module threads: module 0.1-50, diametral pitch threads: pitch 160-0.5, center height above flat guideway: 265mm, center height above top of V-way: 247mm, bed width: 403mm, main spindle with spindle nose according to DIN 55022: size 11, spindle bore: 103mm, internal taper: 1:20, largest diameter: 109mm, Morse taper of centers: No. 5, leadscrew pitch, standard: 12mm, tailstock quill diameter: 80mm, standard drive power: 18.5kW, rated speed of drive flange motor: 1400rpm, turning tool cross-section according to DIN 770: 25x25mm, max. faceplate diameter: 500mm, max. three-jaw and four-jaw chuck diameter according to DIN 6350: 315mm, weight: 3t, with work light, coolant system with chip tray, four-way tool post with face serration for one-hand operation on the compound slide, operating manual and fixed steady rest. An on-site inspection is possible. Hfodozzqblspfx Adxjl

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Hodpfxszwxz Ee Adxjfl Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.