Used Multi Spindle Boring Machine for sale (98,988)

Condition: excellent (used), Multi-spindle & bar-turning lathes Ibjdpfx Ajwc Aqdefioc TRAUB TK 42 * Spindle power 5.5 - 9 kW * Maximum workpiece length 206 mm * Spindle bore 42 mm * Length L - R 2500 mm * Width V - H 900 mm * Height 1700 mm * Tool changer holder 4 slides

Condition: good (used), Year of construction: 2015, I sell the multiple boring machine Detel M-21, year 2015. Available immediately. Isdpfotmwnisx Afiebc

Condition: good (used), Year of construction: 2001, I sell the multiple boring machine DETTEL M2232 22-spindle x distance 32mm Turning head 0-90° Isdpfoq H H Naex Afiobc screw-quick-change bushes included. Type Vitap. 2 pcs. side fences included Good condition. Available immediately.

Year of construction: 2004, condition: good (used), I sell the multiple boring machine SCM TOP 35, Year 2004. Number of spindles 35 Offset 32mm 6 positions for pre-set drilling depths Iedpoiu Urpofx Afiobc 2 Aluminium fences 2 x 1500mm 4 stoppers for Aluminium fences 4 material pressures pneumatic 2 electromotors 2 x 2,2KW Tilting 0-90° full servomotorical Two-step drilling with pneumatic active piston / max. Drilling depth140mm ! Max. Element width over the drilling head 1280mm. Total weight 693kg. Very good condition. Available immediately.

Condition: used, BLX 130 – mașină de alezat (boring machine). Mașină de alezat BLX 130 📌 Date generale Model: BLX 130 Tip echipament: Mașină de alezat si frezat orizontal . Utilizare tipică: Prelucrare de mare precizie a componentelor voluminoase (corpuri de utilaje, matrițe, componente pentru energie, structuri sudate etc.) Ibedsw Hpxcepfx Afisc 📐 Capacități de lucru (cursă pe axe) AxaCursă (mm)Descriere X10.000 mmCursa longitudinală (deplasarea mesei pe lungime); indică o capacitate de prelucrare a pieselor mari, lungi (ex: carcase, șasiuri) Y3.000 mmCursa verticală a capului de alezat (ridicare/coborâre pe coloana principală) Z1.000 mmCursa transversală a capului de alezat (mișcare înainte/înapoi față de piesă) W1.000 mmCursa pinolei (bară de alezat) – avansul axial al sculei (esențial la alezare profundă) ⚙️ În mașinile de alezat, W este mișcarea de avans axial a barei de alezat (boring bar), care poate ieși sau intra din capul principal, independent de axa Z. ⚙️ Caracteristici structurale (tipice la această clasă de mașini) ComponentăSpecificații (tipice pentru clasa BLX 130) Diametru pinolă (bară alezare)130 mm (de aici vine „BLX 130”) Sistem de ghidajGhidaje prismatice sau liniare, pe axele X/Y Cap standard de alezat + opțional cap universal sau cap unghiularPutere motor principal30–50 kW (în funcție de variantă)Turații ax principal10 – 3.000 rpm (reglaj variabil, transmisie cu cutie automată sau servomotor)

Condition: ready for operation (used), functionality: fully functional, The MPFSH-075-01 Multi-Fill dosing machine is an ideal solution for the precise dosing of various food products. Thanks to its versatile design, it can handle a wide range of products, such as cooked pasta, rice, vegetables, cut fruit, surimi, chilled salads, and even cooked meats. Indeed, this machine stands out for its ability to precisely dose difficult-to-handle products while ensuring uniform distribution in different types of containers. Furthermore, the machine is designed to operate efficiently, with optimized air and water consumption, reducing operating costs while ensuring consistent performance. Furthermore, its integration into a production line improves productivity and guarantees high-quality results. Furthermore, this robust machine is suitable for demanding industrial environments, offering a durable solution for the needs of the food industry. In short, the MPFSH-075-01 Multi-Fill dosing machine is essential equipment for companies looking to improve the efficiency of their dosing processes while ensuring consistent product quality. Technical Specifications: Model: MPFSH-075-01 Brand: Multi-Fill Year of Manufacture of this Multi-Fill Filling Machine: 2006 Air Consumption: 60 CPM > 80 PSI / 30-35 Cubic Feet/min / 5.5 Bar / 51-60 Nm/hour Water Consumption: 0.75 – 1 Gal/min / 2.8 – 3.8 Liters/min Total Required Frequency with Air Vacuum = 0.45 kW Products Filled: Cooked pasta, rice, cut vegetables and fruits, surimi, chilled salads in a variety of containers, cooked meats. Ibodpfx Aowf D Rwsfisc HTwLg8C1

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1974, Mitsubishi Floor Borer MAF 200/135 Year 1974 Iedpfoxmr Auex Afiobc Fully Operational X Axis 10,000 mm Y Axis 3000 mm Z Axis 600 mm W axis 1,000mm Spindle diameter 200 mm Borer Diameter 135mm Max. spindle speed 810 rpm Spindle motor power 37 kW Table length 1,600 mm Table width 2,100 mm Table Load 15,000 kg Length x width x height (1750.0 × 2667.0 × 300.0) Weight 55,000 kg Immediate Delivery

Condition: good (used), Year of construction: 2002, Robust Tilting Spindle Moulder T 26, tiltable from -45 to +45 degrees with 2-axis position control Duocontrol Tilting spindle moulder in excellent specification A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Height adjustment max. 150mm, electric adjustment When adjusting the height, the correction factor for the tilting angle is shown in the upper display, which can then be set on the stop, allowing settings according to drawings Four spindle speeds: 3,000, 4,500, 6,000, and 9,000 rpm Spindle diameter 30mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of height and fence Fence with lifting device can be swung away (for curved milling work) Table opening adjustable via eccentric table rings, electric adjustment Table extension on right and left with pull-out workpiece support Support can be extended by up to 700mm Table length approx. 2400mm Hinged fence for plunge routing Original Martin aluminium fence jaws with two bridges Aigner Centrex workpiece pressure device 3-roller power feed HolzHer 1117, with 8 speeds, reversible, new rollers Power feed socket, switchable from the control panel Extraction port 2 x 120mm Compressed air connection 6bar Emergency stop switch Some parts of the machine have been newly painted Approx. 7,400 operating hours Operating instructions CE marking Ibedpfx Afevv H T Roijc Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier."

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control: SIEMENS 840D Solution Line (electrical overhaul 2017) x-travel: 7.000 mm y-travel: 2.100 mm z-travel: 1.500 mm z-travel vertical: 1.200 mm Universal milling head (orthogonal design) Swivel range of milling head holder: 340 °Grad Swivel range of milling head: 180 °Grad Mounting cone for tools with steep taper: SK50 spindle truning speed range: 22 - 2.240 U/min Feed rate x,y and z-axis: 2 - 12.000 mm/min Ibsdpfx Afexphm Ujisc Rapid traverse rate x,y, and z-axis: 12.000 mm/min Drive power 100% ED / 60 % ED: 31,5 / 39 kW Clamping plate dimensions of clamping plate: 6.000 x 1.500 x 300 mm Number of T-slots: 6 T-slot distance: 250 mm max. load: 10 t/m² Equipped with: NC dividing head PEISELER AWU 650 with vertical faceplate, diameter 650 mm automatic universal milling head, orthogonal, (Completely refurbished 2017, rarely used since then) SIEMENS electronic handwheel 3 support tables various prism support blocks MAYFRAN hinged belt conveyor Coolant system with paper belt filter Work platform moving in the X direction, protective cover with viewing window The machine is in exceptionally good condition and can be viewed while under power. In 2017, a new SIEMENS 840D Solution line control system was installed, all drive motors and the control cabinet were replaced at the same time.

Condition: good (used), Year of construction: 2004, Steuerung: Siemens 840-D Verfahrweg X: 6000 mm Ibjdpfx Aexn R Ncofisc Verfahrweg Y: 3000 mm Verfahrweg Z: 1000 mm Verfahrweg W: 700 mm Spindeldurchmesser: 150 mm Spindeldrehzahl: bis zu 2800 U/min Spindelleistung: 51 kW Werkzeugwechsler: 80 Werkzeuge Vertikalfräskopf CNC-Rundtischgröße: 2000 x 2500 mm Tischverfahrweg V: 1500 mm Tischtragkraft: 25 t 2 Stück Bodenplatten Späneförderer Automatischer Kopfwechsler KF-D4 vertikaler Einachsen-Fräskopf, 2,5° programmierbar

Condition: used, Year of construction: 2010, Technical data: - Wescott drill chuck 0-20 mm - Cross travel 250 mm - Depth travel 215 mm - Height adjustment 165 mm - Tiltable drilling unit 45°-90°-45° - Extraction connection 100 mm - Table size 600 x 320 mm - Working height 870 mm - Motor 2.2 kW (3.0 HP) / 400 V - Speed 2840 rpm - Single-lever operation - Drilling unit tiltable to both sides - Dowel drilling device with 4 index positions: 16-22-25-32 mm - Height adjustment via handwheel - Eccentric clamp - Extendable table extension - Mitre stop - Dimensions L=1160, W=750, H=1080 mm - Weight 260 kg Storage location: Nattheim Ibodpjxcmv Uefx Afioc

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Ibsdpou Dahnjfx Afiec Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: excellent (used), DETEL M9 Pneumatic Drilling Machine Pneumatic feed of the unit Adjustable drilling depth Pneumatic material clamping Capable of vertical and horizontal operation Head with 9 spindles Spindle pitch: 32 mm Ibjdpfx Afexnzxboiec Spindle motor: 1.1 kW

Year of construction: 2012, condition: excellent (used), YASDA YBM Vi40 CNC jig boring machine / machining center machine in perfect condition incl. accessories (see photos) For the complete photo gallery: See attached PDF file (from page 4) TECHNICAL DATA Travels X-axis: 900 mm Y axis: 500 mm Z axis: 450 mm Distance from the table surface to the spindle tip: 100 to 550 °. Ijdpfx Aopqx H Tsfijbc Rotary table diameter: 400 mm Pallet loading capacity: 200 kg Table surface configuration: 44-M12 thread C axis: 360 ° Table tilt axis movement range (B axis): +- 110 ° Distance between center of tilt axis and rotary table: 0 mm Rotary axis (C axis): 100 rpm Max. rotation of the inclination axis: 20 rpm Motor for rotary axis: 4,2 kW Motor for inclination axis: 4,5 kW Spindle type: SA40-24`000-18,5 Spindle speed range: 100 - 24`000 rpm Spindle speed range programming: Programming by direct input of a 5-digit S-command Number of spindle speed ranges: 1 Type of spindle conical bore: HSK-63A Inner diameter of spindle bearing: 65 mm diameter Rapid traverse Speed: X,Y,Z axis: 20`000 rpm Feed rate: X,Y,Z axis: Max. 5000 rpm C-axis: 100 rpm B axis: 20 rpm Smallest input increment: 0.0001 mm/deg Automatic tool changer: 60 tools Selection method: Any selection Tool shank type: HSK-63 A Max. tool diameter Tool diameter: 100 mm Max. tool diameter Tool diameter at full setting: 70 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool balance weight: within G2.5 Machine dimensions: 3220 x 3885 x 3515 mm Machine weight: 15`000 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: excellent (used), Year of construction: 2020, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions With Aigner integral fence and 3-roller power feed Iedpjxac Eyofx Afisbc - Machine in as-new condition - Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle assembly mounted on the table Especially sturdy design Smooth operation thanks to precision components and high dead weight Standard right/left spindle rotation with electronic lockout when changing direction 5 speeds from 3000 to 10,000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron table for lasting precision Easy operation thanks to controls and speed display on the front of the machine Standard fence with fine adjustment and aluminium fence jaws Powerful industrial motors Equipment details: Moulder fence Moulder fence adjustment with crank/wheel from the front With digital readout Quick-change spindle MK 4 quick-change spindle standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting work Scope of delivery: Manually tiltable spindle from +45° to -45° Speed indication via LED on the front Aluminium fence jaws Curved cutter guard Right/left rotation of the spindle MK 4 quick-change spindle Moulder fence with crank/wheel adjustment from the front with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model CASADEI F 25 LL FK Item no. 5220728 Technical Data Working table dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. profiling tool diameter: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5 steps: 3000/4500/6000/8000/10000 rpm Motor power: 400 V / 50 Hz / S6-40% 7 kW Weight: 480 kg Extraction port diameter at fence: 1 x 120 mm Extraction port diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 2010, Technical data: - Wescott drill chuck 0-20 mm - Cross travel 250 mm - Depth travel 215 mm - Height adjustment 165 mm - Swiveling drilling unit 45°-90°-45° - Extraction port 100 mm - Table size 600 x 320 mm - Working height 870 mm - Motor 2.2 kW (3.0 HP) / 400 V - Speed 2840 rpm - Single-lever operation - Drilling unit swivels to both sides - Dowel drilling device with 4 index positions: 16-22-25-32 mm - Height adjustment via handwheel - Eccentric clamp - Extendable table extension - Mitre fence - Dimensions L=1160, W=750, H=1080 mm - Weight 260 kg Ibsdpfjxcmv Ijx Afiec Storage location: Nattheim

Condition: new, Year of construction: 2022, Drilling depth 170 mm Drilling width 250 Speed 2800 rpm HOLZKRAFT long hole drilling machine LLB 30 Entry level long hole drilling machine with single hand lever, eccentric clamp, dowel drilling device and drill head height adjustment with handwheel and numerical display for fast and precise working working table (LxW): 580 x 300 mm drilling width: 250 mm drilling depth (at 90°): 170 mm drill head height adjustment: 200 mm working table rotation range: not rotatable tool holder: WESCOTT drill chuck tool clamping range: Ø 0 - 20 mm spindle speed: 2.800 min-1 motor power: 2,2 kW | 400 V - 50 Hz suction nozzle: Ø 70 mm dimensions (LxWxH): 1500 x 920 x 1400 mm Weight (net): approx. 160 kg Including dowel drilling device, eccentric clamp, numerical display height adjustment, Wescott drill chuck 0-20 mm HOLZKRAFT LLB 30 slot drilling machine - entry-level machine for professional slot drilling - Made in EU Easy operation via one-hand lever for fast and precise work Drill head with hardened prism guides and bearing with ball contact system Drill head height adjustment with hand wheel and numerical display Manual eccentric clamp Sturdy cast steel construction Powerful three-phase motor Dowel device with grid position 16 | 22 | 27 | 32 mm Clamping stops allow easy and quick adjustment of the drill head run Scope of delivery HOLZKRAFT LLB 30 slot mortising machine Drill head height adjustment with hand wheel and numerical display Dowel drilling device with grid Eccentric clamp Wescott drill chuck 0 - 20 mm Instruction manual with exploded views, spare parts lists and CE- Declaration of Conformity Iedpfjih H A Rsx Afiebc Location: Ex stock 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2018, Panhans Mortising Machine Type: 116/10 - Max. drilling depth: 145 mm - Max. drilling length: 240 mm Ibedpfjxgu Tvox Afijc - Height adjustment: 135 mm - Extraction nozzle diameter: 100 mm - Color: RAL 7035 Light Grey, RAL 5000 Violet Blue - Net weight approx. 200 kg Robust German engineering Professional long-hole mortising and precise dowel drilling Fixed table, smooth-running mobile drill motor Mobility kit for increased flexibility Cast iron table 700 x 380 mm, thick-walled and highly ribbed Smooth, backlash-free cross-slide with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length restriction via adjustable side stops left and right Drill motor output 1.3 kW/1.8 HP with motor brake and convenient tool tray Including emergency stop button High-precision three-jaw drill chuck, clamping range 5 – 20 mm Dowel drilling system for row drilling with indexing roller: 16, 22, 25, and 32 mm, high-precision machined indexing, fixing via spring-loaded indexing bolt Detachable frame stop with index pin for positions: center, left, right CE-compliant GS certified Including additional special accessories: - Single-lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2024, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Isder Eli Topfx Afiobc Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Ibsdev Trlmepfx Afioc Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: new, Year of construction: 2025, Sturdy cast steel construction With rigid milling spindle 3 spindle speeds 3500 to 10000 min¯¹ Milling spindle with right-left rotation Large dimensioned milling unit made of grey cast iron, directly mounted to the table With suction hood under the worktable for better extraction Solid and precise cast iron table Quick and easy speed change Powerful motor with 5,0 kW Standard arc milling protection hood Quality Made in Italy Equipment details Cast iron milling unit Directly mounted on the milling table Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life 3 milling speeds from 3500 to 10000 min¯¹ Powerful motors equipped with powerful three-phase motor Ibodpjhp Rcrsfx Afijc Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. The integrated suction connection ensures a clear view Milling table opening A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Curved milling protection hood Included as standard Reversible fence jaws versatile integratable stop for bridging the tool gap enables safe working even with narrow workpieces TECHNICAL DAY

Condition: new, Year of construction: 2024, Hoku Houfek long hole drilling machine LLB VD 20 R Top condition - Top machine - Motor 1,5/1,9 kW, Transverse displacement in Y-axis 250 mm, Longitudinal displacement X 340 mm, Vertical displacement z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel drilling device with pitch 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill bit height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, table rotatable +/- 45°, weight approx. 345 kg immediately ex stock 54634 Bitburg Subject to prior sale, Iedpju Agzxsfx Afisbc

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Iodpfsw Sgm Hox Afijbc Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT controller with: Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Available: short notice

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops Iodpfexdttiex Afiobc - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: as good as new (ex-display), Year of construction: 2025, Minimax ti 55es LL - spindle moulder Figure shows 55 i T s standard version elite The professional craftsman machine with Swivel Milling spindle and 4 speeds. M Digital: motorized height adjustable and Tiltable Stable steel-cast iron construction Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Display of the cutting speeds by LEDs Quick and easy change of speed of eccentric tension Right left rotation Display height and inclination 1/10 mm exactly Shaper fence heavy-duty professional: with fine adjustment via rack and pinion, with numerical display, ALU stop baking, 3-fold positioned for quick repeat of setting Scope of delivery: Aluminium milling stop baking Milling wheel arch guard Extension table left and right Model minimax ti 55es LL Item No. 5502252 Ibodpfx Ajdqzh Rsfisc Technical data Dimensions of the working table 2500 x 655 mm Formatschiebeschlitten commercial length of spindle dimensions 125 mm Max tool diameter 240 mm Max tool diameter lowerable 230 mm Max tool-Ø pin cutter 320 mm Spindle inclination 0-45 degree Speed 3500/6000/8000/10000 min-1 Engine power 400 V / 50 Hz / S6-40% 5.0 kW Suction nozzle diameter 2 x 120 mm