Used Mould Press for sale (28,990)

Condition: excellent (used), Machine is in a very good condition, works with no problem at all! Feel free to come and inspect machine under power upon appointment! Ijdpfx Ajim Si Rednea

Condition: good (used), Year of construction: 1996, Max. package thickness: 82 mm. Max. pane/frame size: 2700 x 4000 mm. Working direction: from left to right. Dimensions of the goods: Width: 3750 mm. Height: 3650 mm. Weight: approx. 4800 kg. Condition: good, second-hand Iedpfx Aexz Rv Njdnja

Condition: ready for operation (used), Very well-known and reliable Cauhe die-cutting machine, format 1200x1600 mm, year of manufacture 1996, from second owner. Iodpfx Adsxz Ncbonja

Condition: excellent (used), Year of construction: 1993, Müller Weingarten blanking line Isdsxz Hxaepfx Adnsa Pressing force 5,000 kN Stroke rate 15-60. rpm Stroke 255 mm Stroke adjustment 140 mm Installation height 930 mm Table surface 4,000 x 2,500 mm Plunger area 4,000 x 2,500 mm Belt conveyor Belt width 500-2000 mm Belt thickness 0.5-2.0 mm Reel load capacity 30,000 kg

Condition: used, Year of construction: 1988, from training workshop, public authority pivotable for long workpieces used, in good condition machine cleaned, overhauled greased, function tested, trial run manufacturer Gea type Kapre 3000 year of manufacture 1988 one-sided from below press cylinder 1 heating rail working length 3000 mm pneumatically operated mobile New parts: mist lubricator compressed air lines 2 pot seals for press cylinder 2 pot seals for clamping cylinder plug for heating rail Storage location 97447 Gerolzhofen, loaded free on truck, unpacked Handover in current condition as inspected, without warranty or liability Iodowbi Exopfx Adnja

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length Ijdpfxswag Rie Adnea 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,089 h, General Data Machine weight 6400 kg Measurements height 2810 mm Measurements depth 2140 mm Main Drive Number of axis 6 Bending length 3060 mm Iodoxyl Nnjpfx Adnoa Stroke 300 mm Pressing force 1000 Kn Movement X-Axis Movement 600 mm Y-Axis Movement 300 mm Dimensions Machine Length 4175 mm This servo-electric SAFAN E-Brake 100-3100 press brake was manufactured in 2021. It offers a pressing force of 1000 kN and a bending length of 3060 mm. The machine is equipped with a CNC-controlled backgauge with X, R, Z1, and Z2 axes. If you are looking for high-quality bending performance, consider the SAFAN E-Brake 100-3100 that we have for sale. Contact us for more information Application Types Bending

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 7,500 h, machine/vehicle number: 963, Universal Walking Vibropress for Multilayer Production: For efficient mass production of: - Small-format elements such as paving stones and blocks in multilayer production - Special elements such as curbstones, palisades, culverts, manhole rings, and relieving rings in single-layer production The machine is designed for the manufacture of large-scale vibropressed components. Production on vibrating table: Iedpfjxz Egcex Adnja Maximum production area: 1,240 mm x 1,000 mm Maximum product height: 650 mm Maximum product height in multilayer production: 250 mm Minimum product height in multilayer production (on pallet): 40 mm Maximum height (transportable) of multilayer package including pallet: 640 mm Production on the ground: Maximum production area: 1,240 mm x 1,240 mm Minimum product height: 250 mm Maximum product height: 1,200 mm

Condition: used, Heidelberg KSB Cylinder Iedpjxz D Daefx Adnoa Automatic die cutting machine Max Sheet Format: 40 x 57 cm (approx. 15.75 x 22.44 inches) Min Sheet Format: 12.5 x 15.0 cm Speed: Approx. 5,000 sheets/hour Weight: ~3,500 kg

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality checked. Isdpfx Asxz Dwtsdnea FLITS Rental & Sales service: with every machine we include a bundle of baling wire (120 wires). Do you require additional bundles of baling wire? Please request a complimentary quote. At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are very welcome to view the machines at our premises. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to advise you thoroughly and present the most suitable machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, total height: 2,700 mm, total length: 3,900 mm, total width: 900 mm, We are selling the machine due to a new purchase. Viewing is possible by prior appointment. Iodpfoxqqpbex Adnja

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50 /92-NG 600/15 kW/32Liter, pressing force: 130 t, operating speed: 80 mm/s, overall weight: 3,500 kg, Hydraulic straightening press Manufacturer: G +K Year of manufacture: 1992 Max. pressing force: 130 t Lower table size: 800 x 500 mm with T-slots Upper table size: 800 x 500 mm with T-slots Installation dimension: 1000 mm System pressure: 250 bar Electric motor: 15 kW Weight: 3400 kg Isdpfx Adoxr Rnaonea Operating voltage: 380 V AC, 24 V DC

Year of construction: 2016, condition: ready for operation (used), General Data Machine weight 10500 kg Movement Y-Axis Movement 400 mm This Warcom DINAMICA 100.30 press brake was manufactured in 2016. It features a maximum force of 100 Ton, a working length of 3200 mm, and a motor power of 11 kW. Weighing 10,500 kg, it operates with a maximum working pressure of 250 bar. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 100.30 machine we have for sale. Contact us for more information about this machine. Application Types Bending Isdpfxoxyl Rre Adnoa

Condition: excellent (used), functionality: fully functional, I am selling this line, which consists of the following press, decoiler, straightener, and Rebenda VP 205 CNC roller feeder. The line has been dismantled and stored in a warehouse. Excellent condition, regularly maintained. Isdpfx Adjxz Dnxonea

Condition: used, Year of construction: 1999, functionality: fully functional, One color Ijdpjxz Dufjfx Adnja Front panel 11 mios impressions NP device DDS dampening

Condition: used, Year of construction: 2012, Applicable material: Wood Auction item. Pellet mill is new never used. Was left under a roof for about 10 years. Iedpjxz Dm Iefx Adnea Cap is missing, visible in photos. Sold as seen in pictures.

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. Ijdpfedx R Tfsx Adnea - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: new, Year of construction: 2024, functionality: fully functional, TRtech Prime 31100 Press Brake 1 EUR 52,500.00 EUR 52,500.00 Bending Force: 100 ton Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 265 mm Daylight: 490 mm Throat Depth: 410 mm Table Height: 900 Table Width: 110 mm Free Fall Speed: 120 mm/s Pressing Speed: 10 mm/s Return Dpeed: 110 mm/s X Axis Stroke: 750 mm Engine Power: 11 kW Width: 1780 mm Height: 3960 mm Length: 2850 mm App. Weight: 8500 kg Number of Axis: X, R, Z1, Z2, Y1, Y2 Safety Cages with Switch CNC Controlled Hydraulic Dynamic Crowning System Control Unit: STEP Rock 22 Servo Motor Backgauge: X, R, Z1, Z2 Segmented Die Segmented Punch Sliding Front Arms ( T-Slot and stopper ): 2 pieces Payment conditions: BY SWIFT: %40 pre-payment in advance, rest before loading TOTAL EUR 52.500,00 Delivery time: EX-Works OSM Makina, 12 weeks after the reception of order SEAL AND SIGNATURE PROFORMA INVOICE Isdpfx Adevd Aavensa Bill To Frank Pelka Maschinen GmbH Dorfstr. 11 57271 Hilchenbach Germany

Year of construction: 2020, condition: ready for operation (used), This TRUMPF Trubend 5130 press brake was manufactured in 2020. It includes a comprehensive set of tooling valued at €30,000 and programming software with a license transferable from Trumpf. Features include a CNC BendMaster, extended Y-axis stroke, 4-axis backgauge, and air-conditioned electrical cabinet. Ideal for precision bending with low operational hours. Contact us for more information about this machine. Iedpfxoxyl S Aj Adnsa Application Types Bending

Condition: excellent (used), Year of construction: 2016, LAMELLA – CASE CLAMP PRESS GANNOMAT “CONCEPT 70 ECO” Complete in standard configuration including: - Sturdy, torsion-resistant steel frame, constructed with welded and bolted assemblies - UPPER lamella pressure beam with 6 elements, SIDE lamella pressure beam with 5 elements - Lamella pressure beams feature the tried-and-tested tolerance compensation system (Ganner system) for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance lead nuts with grease reservoir - Clamping is electromotor-driven, with two separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is continuously adjustable electronically using two potentiometers and regulated via frequency inverters, providing a completely wear-free press force control - Pressing force for horizontal beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for vertical beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) Isdsw Td A Ijpfx Adnoa - Press and adjustment speeds of the pressure beams with fine positioning, switchable via 3-stage selector: 5 / 10 / 25 mm/sec - Extremely user-friendly operation - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Overhauled by Ganner, with 6-month parts warranty Location: ex stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic Manufacturer: Hess Type: Export Maximum workpiece size: 2,500 x 1,500 mm Press force: 1,400 kp pressing capacity per pressure unit at 15 bar Vertical cylinders: 2 + 2 pressure cylinders Horizontal cylinders: 2 + 2 pressure cylinders Dimensions: 3,900 mm x 2,500 mm x 600 mm Weight: 1,060 kg Hess Corpus Press Export, pneumatic 2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar 2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator Anodized measuring scales, detachable feet Isdpfjxgvwpox Adnsa Location: Ex works customer site - Immediately available -

Year of construction: 2025, condition: new, Vacuum membrane press VPR-3500 is a universal Press for the wood processing and thermoforming. The VPR-3500 press is also adjustable and mobile. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components Vakkumsystem: work surface with vacuum channels for a uniform Unterdruckauch for large workpieces. Becker Vakkumpumpe / oil free / tank capacity 100 l Work surface: 3500x1500mm Pump output: KW 0.75 Vacuum pump flow rate: 40 m3/h Rubber membrane Dimensions exterior: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Off the shelf 54634 Bitburg -free load- Iodpfxsd Ecc Tj Adnea

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this Isdpelht H Eefx Adnsa machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2024, Technical data: Slat carcass press from our showroom; Working range: width from 150 - 2.550mm, height from 150 - 1.400mm; depth from 150 - 700mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 dN(kg) of the lateral pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 dN(kg) of the upper pressing bar Simple operation via 6 separate push buttons, Freely adjustable pressing time preselection with automatic opening, Charging height 300 mm Iedpeb Eln Dofx Adnsa Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, TECHNICAL DATA Pressing force 30t max. load prism jaw 7.5t piston stroke 160mm piston travel 550mm Dimensions and weights Iedpfx Aji Amnpednsa length (product) approx. 1240mm width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Location: Ex works - available at short notice -