Used Morbidelli U 550 for sale (48)

Condition: used, Year of construction: 1991, functionality: unexamined, Working area 3130 x 1100 mm Maximum processing height for door machining: 70 mm Extraction port diameter: 200 mm 1 main boring unit with 29 independent spindles, 32 mm spindle spacing Top milling units with LEUCO interface: 2 pcs Grooving unit: 1.1 kW Horizontal milling unit for lock cases Horizontal boring head with 2 spindles Horizontal boring heads for right and left side drilling: 3 pcs Converter: 17 kW Rodpexu Eyvofx Aafen Machine dimensions (LxWxH) approx.: 5000 x 3000 x 1800 mm Weight approx.: 3500 kg

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,385 mm, travel distance Z-axis: 180 mm, controller model: Xylog, milling spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis working area: 3,085 mm Y-axis working area: 1,385 mm Z-axis working area: 180 mm Programmable X-axis speed: 50 m/min Programmable Y-axis speed: 45 m/min Programmable Z-axis speed: 22.5 m/min Drilling unit Vertical spindles: 10 Rjdpsyf Ekkjfx Aafjn Horizontal spindles X-axis: 2 Horizontal spindles Y-axis: 2 Motor power: 2.2 kW Speed: 4,000 rpm Milling unit Electrospindle: 10 HP Speed: 18,000 rpm Engraving unit Motor power: 2.2 kW Speed: 6,000 rpm Worktable Number of worktables: 6 Vacuum suction cups: 18 Loading supports: 4 Vacuum pump Flow rate: 100 m³/h MACHINE DETAILS Control system: Xylog Installed power: 17/20 kW Compressed air: 6/7 bar Weight: 3,000 kg EQUIPMENT Automatic lubrication

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: AL/008514, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, controller model: PC mit Xilog Plus Software, workpiece height (max.): 60 mm, overall weight: 2,800 kg, TECHNICAL DETAILS Working area X-axis: 3,000 mm Working area Y-axis: 1,000 mm Workpiece thickness (processable): 60 mm Upper drilling and milling unit Electrospindles: 1 Vertical spindles: 24 Horizontal spindles X-axis: 2 Horizontal spindles Y-axis: 2 Grooving saw unit X-direction: 1 Grooving saw unit power: 2.2 kW Lower drilling and milling unit Electrospindles: 1 Vertical spindles: 24 Horizontal spindles X-axis: 2 Rjdpjydl Adjfx Aafon Horizontal spindles Y-axis: 2 Grooving saw unit X-direction: 1 Grooving saw unit power: 2.2 kW MACHINE DETAILS Control: PC with Xilog Plus software Weight: 2,800 kg EQUIPMENT Panel clamps Manual workpiece loading on Flotex table Automatic workpiece unloading Automatic central lubrication

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Rjdsvvi Nzjpfx Aafsn

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Redpfx Aaevvi Rfjfen

Condition: used, Year of construction: 2006, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel length X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Worktable TV with 10 supports L=1500 4 working zones 2 cross lasers Vacuum pump 250 m³/h PC control Windows Vertical milling unit ISO 30 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Dongle for XILOG software Rsdpfx Aox Twd Hsafon Location: Nattheim

Condition: used, machine/vehicle number: 008397, X axis working area: 3650 mm Rodpfx Ajx S Epbsafon Y axis working area: 1520 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 30 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 008340, X axis working area: 4400 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 36 Total number of tool changer positions: 30 Rjdpfxjx A Tg Ho Aafsn

Condition: used, Year of construction: 2001, Empty weight: 5.000 kg Rjdpfjxbzg Eox Aafsn What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AL/6222 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 18 - └ Vertical drilling spindles [pcs.]: 6 - Tool changer positions [pcs.]: 14 - System/software: Xilog plus - Safety feature: Bumper guard - Voltage [V]: 400 - Current consumption [A]: 32 - Power [kW]: 26.0 - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Operation in X, Y, Z axes Horizontal drills on X-axis – 10 pcs Horizontal drills on Y-axis – 2 pcs Vertical drills on Y-axis – 14 pcs Vacuum pump 3 kW Rjdpfx Aajx An Avsfsn Capability for dual-field operation 6 beams Milling unit 2 work zones 3000 kg Year of manufacture: 1992

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Rjdpfex Tqg Ujx Aafjn Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 4,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 180 mm, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: esa, controller model: kvara 6, workpiece length (max.): 4,500 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 180 mm, total height: 2,750 mm, total length: 7,000 mm, total width: 3,000 mm, table width: 1,200 mm, table height: 950 mm, table length: 4,500 mm, rotational speed (min.): 24,000 rpm, rotational speed (max.): 24,000 rpm, overall weight: 5,000 kg, spindle speed (min.): 24,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 7,500 W, number of spindles: 2, number of slots in tool magazine: 10, mount diameter: 200 mm, tool length: 200 mm, tool diameter: 150 mm, tool weight: 5,000 g, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Electronic control with PC Office Software Xilog Plus Remote control device to manage the main functions of the machine Working area: 4.400 x 1.300 x 180 mm​. Rodpfx Aeufgg Roafjn Working table “Nesting” aluminum Reverse flow system Nr. 6 Back stops Nr. 6 Drowned intermediate stops at 620 mm. from backside Nr. 1 Electrospindle 7,5 KW – HSK 63 Tool changer RAPID at nr. 10 positions Motor 2 manual tool change HSK63F Disc unit 0-90 4 hp Boring unit: Nr. 18 independent vertical spindles Nr. 3 Independent horizontal spindles with double outlet, nr. 2 in “X” direction and nr. 1 in “Y” direction Nr. 2 Vacuum pump of 250 m3/h Automatic lubrication Aspiration system optimized Safety nets and bumper CE Marks

Year of construction: 2009, condition: ready for operation (used), Main Drive Number of axis 3 This 3-axis MORBIDELLI UNIX KBT was manufactured in 2009. It features a CNC control system, a working area of 3000 × 1000 mm, and a maximum panel thickness of 60 mm. Equipped with multiple drilling and milling units, including 24 vertical and 4 horizontal spindles, it also has a fixed saw unit and supports both manual and automatic panel handling. Consider the opportunity to buy this MORBIDELLI UNIX KBT CNC Wood Machining Centre. Contact us for more information. Rsdpjx Nr Urofx Aafjn Application Types CNC Wood Machining

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head. Horizontal position of the panel (workpiece) Numerical Control Xilog Plus 2 (Software Xilog Plus 2) Safety cabin (enclosure) of the working head. Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) With pushing system to automatically infeed the workpiece In-feeding table (with motorized belts) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 250 x 70 x 10 (2 x 5 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1300 x 80 (2 x 40 mm) Two (2) panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) Rsdpfefz I Ufex Aafen Inserting nozzle and glue injectors. Storage tanks for automatic feeding of the dowels

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Rodpfjxzfx Eox Aafsn Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Year of construction: 2013, condition: excellent (used), Technical design: Console table 3050 x 1200 mm with manually movable 6 consoles , each console 2vacuum suction cups and a pneumatic lifting rail point laser set-up aid, vacuum pump CNC control XILOG Plus main spindle 8,5 kW (12 HP) HSK 63F with C-axis , 1500 - 24.000 rpm tool changer plate 12-fold 1 adapter unit swiveling saw drilling head with: 12 vertical spindles, 4+2 horizontal spindles, grooving saw bumper safety system The shown tools, HSK- tool holders, drills etc. are not included in delivery! Redskqyizspfx Aafen

Condition: excellent (used), Year of construction: 2014, Drilling line consisting of: 1. MAHROS - BRUSH CF loading system 2. MORBIDELLI - ZENITH F2 CDM through-feed drill 3. MORBIDELLI - ZENITH F2 CDM through-feed drill 4. MAHROS - BRUSH SF unloading system Machine connected - works daily in one shift. The first drill has: upper vertical heads - 3 pcs Rjdegb D Afepfx Aafsn lower vertical heads - 6 pcs horizontal heads L + P- 2 pcs The second drill has: upper vertical heads - 3 pcs lower vertical heads - 6 pcs horizontal heads L + P- 2 pcs rear horizontal heads - 6 pcs Below are details of the machine and a video The possibility of seeing the machine every day. Line availability August 2021

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Redpfsxg Izajx Aafsn Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: used, Bar Machining Center 3-Axis Rsdpfowh A Hiex Aafon

Condition: ready for operation (used), Technical characteristics Rsdpfxjtqkbqs Aafjn 6 beam console table 3-axis ISO 30 electrospindle 10 hp 24 spindle drilling group (12 in X, 6 in Y, 6 horizontal X and Y) Control panel Machine to be restarted Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics 3 axis Capacity: 3470 mm in X 1300 mm in Y 250 mm in Z Workpiece height max 180 mm Electrospindle HSK63 6.6 kW Rsdpfjubgkbsx Aafjn 10-position tool changer 6 SCHMALZ consoles Drilling group 10 vertical spindles 4 horizontal spindles Groove group Vacuum pump 100 m3 / h Control cabinet WINDOWS PC Data transfer Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Lenght: 6000 mm Width: 4050 mm Height: 2400 mm Weight: 3500 Kg

Condition: used, Complete high productivity flexible drilling line with automatic loading and unloading system General technical data: Panel width min 250 mm, max 3000 mm Panel depth min 100 mm, max 900 mm Panel thickness min 12 mm, max 60 mm Max weight per panel 50 kg Worktop height mm 1060 Linear speed of panel conveyor with inverter m/min 20 -95 With panels weighing more than 50 kg the speed must not exceed 50 m/min Production capacity of the line up to 25 pieces \ minute Technical data of numerical control and line management: Numerical Control TPA - Albatros - CNC 2000 EASYTOOL software for creating and modifying machine equipment. It allows you to define within a single file the arrangement of the tools mounted on each drilling machine. The files created by Easytool will be reworked from the machine plant optimizer in order to divide the workloads along the production line. Line composed of the following machines: * MAHROS brand double cell automatic loader, BRUSH model - with motorized pre-loading rollers * MARHOS brand panel turner * MORBIDELLI brand flexible drilling machine, POWERFLEX model - no. 5 split lower vertical drilling heads automatic flexible with NC control - with 26 independent spindles each drilling head - n. 3 drilling heads automatic flexible split upper vertical drilling with NC control - with 26 independent spindles each drilling head - n 2 horizontal drilling heads with split heads and 28 + 28 spindles (for each side) each independent (arranged on two levels) * MORBIDELLI brand flexible drilling machine, POWERFLEX model - no. 5 split lower vertical drilling heads automatic flexible with NC control - with 26 independent spindles each drilling head - n. 3 drilling heads automatic flexible split upper vertical drilling with NC control - with 26 independent spindles each drilling head - n 2 horizontal drilling heads with split heads and 28 + 28 spindles (for each side) each independent (arranged on two levels) * Automatic thorning machine brand MORBIDELLI * MARHOS brand panel turner * MAHROS brand double cell automatic unloader, model BRUSH - with motorised unloading rollers and system for the management of martyr panels Rsdjv N Hifspfx Aafen

Condition: used, Year of construction: 2008, PC based Numerical Control with XILOG PLUS software Mobile pine cone with command functions Working range on the X axis is 4400 mm Working range in Y axis 1360 mm Working range in Z axis mm. 180 Z axis travel 200 mm N° 2 work camps in X No. 8 manually adjustable panel support bars with positioning LEDs N° 3 suction cups for holding the panel for each bar N° 4 pneumatic Bakelite bars for lifting the panel (helping with loading and unloading) N° 1 Vertical electrospindle with Vector axis with automatic tool change, HSK 63 connection cones Automatic tool changer with 12 positions on the operating head Drilling head composed as follows: No. 8 vertical X-axis spindles Rsdpjpvai Dofx Aafsn N° 5 Y-axis vertical spindles N° 4 horizontal spindles in X axis N° 2 horizontal spindles in Y axis Safety system with bumper system on the operating head N° 1 vacuum pump 100 m3\h Automatic lubrication

Condition: excellent (used), Year of construction: 2012, CNC Drilling Machine SCM Morbidelli Uniflex HP - Precision and Efficiency in Woodworking We offer for sale a used CNC drilling machine SCM Morbidelli Uniflex HP from 2012. This technologically advanced device is ideal for precise and efficient drilling in wood and wood-based materials. The SCM Morbidelli Uniflex HP is an excellent solution for manufacturers of furniture, stairs, interior design elements, and companies involved in large-scale woodworking. Key Parameters and Features of the SCM Morbidelli Uniflex HP CNC Drilling Machine: ● Manufacturer: SCM Group ● Model: Morbidelli Uniflex HP Redpev Ezfyjfx Aafon ● Type: CNC Drilling Machine ● Year of Production: 2012 ● Condition: Used ● Working Area: ○ X: 3000 mm ○ Y: 1300 mm ○ Z: 80 mm ● Number of Separate Aggregates: 4 ● Drills: ○ Vertical: 96 ○ Horizontal X: 32 ○ Horizontal Y: 8 Additional Information: ● The machine is fully functional and ready for work. ● Possibility to view and test the machine. Keywords: CNC drilling machine, SCM Morbidelli Uniflex HP, CNC drilling, woodworking, wood machines, SCM Group, Morbidelli, CNC drill, furniture manufacturing. Please contact us for detailed information and to arrange a visit.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: AA2/003019, travel distance X-axis: 4,250 mm, travel distance Y-axis: 2,780 mm, travel distance Z-axis: 240 mm, number of slots in tool magazine: 10, TECHNICAL DETAILS Condition: Very good condition, little used Postprocessor: Available for Fusion360 CAM Machining size: 3,660 x 2,200 mm X-axis travel: 4,250 mm Y-axis travel: 2,780 mm Rodpsv E Hapjfx Aafon Z-axis travel: 240 mm Movement speed X-axis rapid traverse: 70 m/min Y-axis rapid traverse: 60 m/min Z-axis rapid traverse: 15 m/min Spindle and tool holder Electro-spindle motor power (S1): 8.5 kW Number of tool holders: 10 (without tools) MACHINE DETAILS Dimensions (L x W x H): approx. 7,000 x 6,000 x 2,700 mm Weight: approx. 5,500 kg Safety devices: Light barrier and barrier grid CE certificate: available Vacuum pumps: not included