Used Montage Hall for sale (771)

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Fgjdpfx Akjzd Rmgsyoh Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2020, operating hours: 19,409 h, functionality: fully functional, number of ink cartridges: 8, color channels: CMYK + Primer + Clear + White + White, number of print heads: 2, resolution (max.): 1,200 dpi, paper width (max.): 2,500 mm, paper height (max.): 1,300 mm, total length: 4,400 mm, total width: 2,450 mm, total height: 1,250 mm, counter reading (black): 3,023, year of last overhaul: 2026, type of input current: three-phase, input current: 16 A, input voltage: 400 V, Mimaki JFX200-2513 UV-LED Flatbed Printer (Model 2020) Professional UV-LED flatbed printer from a single owner – in top condition & serviced annually by a specialist company. Fgedpfx Ajzt Dmrokyeh For sale is a well-maintained Mimaki JFX200-2513 UV-LED flatbed printer from 2020. The machine comes from a single owner and has only been used in a professional environment. It was exclusively used to print on glass using printing stencils. To guarantee maximum operational reliability and perfect print quality, the system has been serviced annually by the renowned specialist company ESC. All print heads are in good condition (see nozzle test). The last check, including the replacement of wear parts, was carried out by a specialist company in July. Technical data & operating hours (values read from the interface): Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Operating hours (Use Time): 19,409 h Printed length: Print Length: Only 3,023 m, Print Area is currently only 5142m² UV lamps (LED): 2 UV-LED lamps (Note: Extremely long-lasting UV-LED technology) Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Ink configuration & special features: Ink type: Mimaki LUS-120 (Excellent adhesion and flexibility on rigid and flexible media) Color configuration: CMYK + Primer + Clear (Varnish) + White + White Your advantage: The double white configuration provides extremely high opacity and speed when printing undercoat or overcoat. The integrated primer and clear varnish enable smart finishing options (spot varnish/textures) and printing on demanding materials such as glass, metal, or acrylic. Accessories & highlights included in the scope of supply: Including a powerful suction fan (vacuum add-on): Keeps even uneven or lightweight sheet materials perfectly flat on the printing table. Transport securing device available: The original transport securing device for safe shipping is fully available. Location & removal: Easy logistics: The hall has a large roller shutter door, which makes the removal for a specialist shipping company or a service company easy and straightforward on the ground floor. Inspection and test print can be arranged at the location. Price is net, plus VAT. Errors and prior sale reserved. This offer is exclusively aimed at commercial businesses and freelancers.

Condition: like new (used), Year of construction: 2014, type of input current: three-phase, total width: 1,200 mm, total length: 1,600 mm, total height: 3,850 mm, filter area: 120 m², suction capacity: 7,200 m³/h, Dust extraction unit, fume extraction unit, self-cleaning filter from the renowned NEDERMAN brand. The FilterMax DX, designed by Nederman, is a modular filtration system capable of serving extraction points throughout the entire production hall. The FilterMax DX is designed to operate with dry dust that may pose an explosion hazard. The unit is equipped with a reinforced, double-grounded housing with a panel designed to withstand extreme loads that occur during an explosion. The unit is like new – it has never been used (stock surplus). Fgodpfx Akezf Hn Aoysh Brand: Nederman Model: FilterMax DX 6000 TR Year of manufacture: 2014 Designation: EX II 1/3 D T=125°C Capacity: 7200 m3/h Filtration area: 120 m2 Filter cartridges: 12 pcs Fan power: 11 kW Inlet diameter: 300 mm ATEX panel to relieve explosion pressure ATEX check valve Unit dimensions: Width: 1.20 m x 1.60 m Height: 3.85 m Base: 1.10 m x 1.40 m Stock number: 0008

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 977 h, load capacity: 2,526 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, total length: 3,830 mm, drive type: Diesel, construction width: 1,810 mm, Rigid telescopic handler Speed class: 25 Technical condition: good Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repair – you can get everything you need from a single source. Lease-to-own options, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The Manitou MT 625 is a versatile telescopic loader for construction sites, agriculture, and lifting and material handling tasks. With a lifting height of up to 5.85 m, a lifting capacity of 2,500 kg, and all-wheel drive, this machine is ideal for working on uneven terrain and in confined spaces. Narrow design for tight access routes and halls. High maneuverability and off-road capability. Robust, powerful, and easy to operate. You can find more information and submit a non-binding inquiry on our website – Safe working at any height. Fgjdswlxh Rspfx Akyjh

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Speed class: 4 Technical condition: New Fgedezvkaqspfx Akyoh Battery condition: New Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repair – you can get everything you need from a single source. We also offer lease-to-own options, financing, and the purchase of used machines. Our team will be happy to provide you with competent and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The Genie GS-1932m E-Drive is a compact electric scissor lift for working at height indoors and on solid surfaces. With a working height of up to 7.55 m, a narrow design, and a modern electric drive, this machine is ideal for maintenance, assembly, and installation work in halls, warehouses, or confined work areas. It is quiet, energy-efficient, and easy to operate. Further information and a non-binding inquiry can be found on our website – safe working at any height.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 211 h, load capacity: 227 kg, empty load weight: 763 kg, construction height: 1,780 mm, fuel type: electric, total length: 1,350 mm, drive type: Elektro, construction width: 750 mm, working height: 5,450 mm, Special aerial work platform Speed class: 4 Fgjdpoya Smuefx Akyjh Technical condition: good Description: Our equipment is regularly serviced and inspected. We offer rentals, sales, service, and repairs – you can get everything you need from a single source. Lease-to-own options, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The Genie GRC-12 is a compact aerial work platform for working at height indoors and in confined spaces. With a working height of up to 5.45 m, a narrow design, a movable platform, and emission-free electric drive, this machine is ideally suited for maintenance, assembly, and installation work in halls, storage areas, or shopping centers. It is easy to operate and particularly maneuverable in tight working areas. You can find more information and submit a non-binding inquiry on our website – Safe working at any height.

Condition: new, Year of construction: 2026, CORMAK WRHS 1610 Mast Pallet Truck is a professional device designed for fast and efficient lifting and transporting of heavy loads in warehouses, production halls, and other industrial environments. Thanks to its advanced construction and high-quality components, this mast pallet truck provides reliability, efficiency, and safety during daily operations. Its main advantages are a high load capacity and significant lifting height, making it an ideal solution for handling pallets and working as a pallet stacker in various industrial applications. Main advantages of the WRHS 1610 mast pallet truck The WRHS 1610 mast pallet truck has been designed for demanding users who require durability, high performance, and operational safety. Its robust construction and functional solutions make it an essential tool for warehouse operations. Key benefits: High load capacity – a maximum lifting capacity of 1000 kg allows the truck to handle heavy pallets and large-sized loads efficiently. Lifting height of 1600 mm – enables convenient storage of goods on warehouse racks, helping to optimize available storage space. Polyurethane wheels – high-quality wheels provide smooth movement, quiet operation, and long service life, even under demanding warehouse conditions. Ergonomic design – the mast and handle are designed for operator comfort, allowing easy handling while reducing physical strain. Durable and stable construction – the strong steel mast ensures stability during lifting and lowering operations, guaranteeing reliable and safe performance. Construction and technology of the WRHS 1610 mast pallet truck Fjdpfxsricgaj Akysgh The WRHS 1610 mast pallet truck combines high-quality workmanship with modern technical solutions. Mast construction The mast is made of high-quality steel, providing excellent resistance to mechanical damage. Its rigid design ensures load stability and safe transportation during lifting operations. Wheels and rollers The truck is equipped with durable polyurethane wheels with dimensions of 180 × 50 mm and fork rollers measuring 74 × 70 mm. These components ensure smooth, quiet, and stable movement on various types of surfaces. Ergonomic operator handle The manual control handle has been designed to provide comfortable operation and easy maneuvering, even in narrow warehouse aisles. Advanced lifting system The WRHS 1610 features: Two lifting options: manual and foot-operated lifting Stepless fork lowering speed adjustment Truck locking system Brakes on both steering wheels for improved safety and stability during operation Standard equipment Load capacity: 1000 kg Lifting height: 1600 mm Steel mast with reinforced construction Polyurethane steering wheels Fork rollers for smooth movement Manual and foot-operated lifting system Adjustable fork lowering speed Locking system and brakes on both steering wheels Ergonomic operating handle Technical specifications Parameter Value Load capacity 1000 kg Lifting height 1600 mm Fork dimensions (L × W) 1150 × 145 mm External fork width 550 mm Distance between forks 230 mm Height with lowered forks 1970 mm Height with raised forks 1970 mm Minimum fork height 90 mm Overall length 1630 mm Overall width 740 mm Turning radius 1400 mm Steering wheels 180 × 50 mm Fork rollers 74 × 70 mm Weight 181 kg

Condition: reconditioned (used), Year of construction: 2011, operating hours: 1,554 h, functionality: fully functional, overall weight: 1,500 kg, HAKO JONAS 1200 E Sweeper New Hawker Perfect Plus 24V 420 Ah (7PZS420) traction battery New Neos 24V 50A charger New air filter Year of manufacture: 2011 Machine operating hours: 1,554 Built-in warning light and full front/rear road lighting A new, innovative cylindrical brush combined with a new anti-static side brush (mixed-bristle) ensures excellent sweeping results A high-performance dust extraction turbine and new sealing skirts around the main brush prevent fine dust from rising during sweeping The machine features a large-debris flap for collecting larger waste items The unit has undergone a comprehensive, meticulous overhaul; operating fluids and components—such as bearings, drive belts, and sealing skirts—have been replaced with new ones. Each unit we offer features actual photos; you are buying the exact machine shown. TECHNICAL DATA: Model: Jonas 1200 E Sweeping width (mm): 800 Sweeping width with one side brush (mm): 1150 Coverage with one side brush (m²/h): 9300 Sweeping speed (km/h): 8 Hopper capacity (l): 130 Filter area (m²): 5 Dimensions L x W x H (mm): 1998 x 1142 x 1520 Weight ready for operation (kg): ~1500 INCLUDED: NEW HAWKER PERFECT PLUS traction battery 24V 420 Ah (7PZS420) Fjdpfx Aksz D D Nxjyegh NEW NEOS charger 24V 50A NEW air filter NEW anti-static cylindrical brush – mixed bristles NEW anti-static side brush – mixed bristles NEW cylindrical brush skirt/seals Built-in warning light Full front/rear road lighting Waste hopper (130L) KEY FEATURES: Ergonomically designed cockpit and centrally positioned operator seat ensure excellent visibility of the cleaning area. The Jonas 1200 E sweeper is the perfect machine for efficient, cost-effective sweeping of multi-level parking garages, warehouses, production facilities, and outdoor areas. Battery power ensures high flexibility, allowing for operation in enclosed spaces and buildings. warehouse halls A large working width (1,150 mm) ensures high area coverage. Highly legible and intuitive control panel.

Condition: new, working width: 610 mm, area performance: 2,745 m²/h, overall weight: 208 kg, warranty duration: 12 months, water tank capacity: 55 l, I-DRIVE 65 PROFESSIONAL FLOOR SCRUBBERS - 2745m²/h TECHNICAL DATA: Model: I-Drive 65 Type: Compact Scrubber Series: Professional Condition: NEW Wheel Drive: Yes Battery Charger Included: Yes Power Supply: Battery Battery Type: 6 i-power 14 Batteries Number of Brushes Included (pcs): 2 Brush Working Width (mm): 610 Squeegee Working Width (mm): 790 Water Tank: Clean / Dirty (l): 55 / 55 Theoretical Area Performance (m²/h): 2745 Weight (kg): 208 I-MOP LITE PROFESSIONAL FLOOR SCRUBBERS FLOORS - 1400m²/h TECHNICAL DATA: Model: I-Mop Lite Type: Compact scrubber Series: Professional Condition: NEW Charger included: Yes Power supply: battery Battery type: i-power 12: 18 V, 12 Ah Number of brushes included (pcs): 2 Brush working width (mm): 370 Squeegee working width (mm): 370 Water tank: clean / dirty (l): 3 / 3 Theoretical surface efficiency (m²/h): 1400 Weight (kg): 16.8 WHY CHOOSE THE I-DRIVE 65 + I-MOP LITE SCRUBBERS The combination of the I-Drive 65 and the I-Mop Lite is a concept developed by I-Team. A 2-in-1 solution – an efficient ride-on scrubber for large areas with the ability to immediately use the compact I-Mop for thorough cleaning in areas inaccessible with a traditional machine. This allows a single operator to thoroughly clean the entire facility without having to change equipment. One machine for multiple surfaces – the I-Drive 65 effectively cleans large, open spaces such as halls, warehouses, shopping malls, and airports. When narrow passages, corners, or under furniture need cleaning, the operator simply removes the I-Mop Lite from the rear handle and continues working without changing positions. ADVANTAGES OF THE I-DRIVE 65 Easy to use - Clear icons and a simple control panel. One-button activation of the brushes and suction system. Automatic fill system - Stops at the fill line, preventing water from splashing or dripping into the battery compartments. Hidden safe - For storing a wallet or phone. Adjustable foot pedal - Easily adjust settings to suit operator preferences. Clear front view while driving. Easy squeegee removal with the push of a button. The ramp can be quickly assembled for loading and unloading. Fsdpfxezkr Dtj Akysgh I-MOP LITE BENEFITS Easy to use - Only 4 buttons, no training required. Super lightweight - Improved ergonomics and increased job satisfaction for cleaners. Microban® antibacterial tank - Prevents bacterial growth for long-lasting hygiene and protection. No trip hazard - Operates on portable lithium batteries instead of a long cord. Brushless motor - Low noise and longer runtime. Efficient cleaning of all hard floor surfaces - 500 RPM high-speed brushes.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 612200, total length: 11,700 mm, total height: 6,200 mm, total width: 3,130 mm, warranty duration: 12 months, type of input current: AC, product height (max.): 2,900 mm, product height (min.): 500 mm, product length (max.): 2,400 mm, product width (max.): 1,200 mm, input voltage: 400 V, compressed air connection: 6 bar, working height: 3,200 mm, input frequency: 50 Hz, transport length: 3,900 mm, throughput speed: 32 mm/s, air demand: 6 m³/h, workpiece weight (max.): 1,500 kg, Equipment: documentation/manual, safety light barrier, Brand new, never used, packaged by the manufacturer, delivered and stored in a temperature-controlled hall in Hungary. Fgodpfoyrnr Rox Akyeh

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Fgodpfeh Ek H Sox Akyoh Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Year of construction: 2010, condition: used, Year: 2010 Condition: good Configuration: - concept with one knife - automatic feeder - automatic vertical unloader - fully automatic adjustment Fodpfex H Su Tjx Akyogh - machine without tooling required - two knives Technical parameters: - max. size (before trimming) - 330 x 241 mm - max. size (after trimming) - 305 x 229 mm - min. size (after trimming) - 148 x 102 mm - max. thickness - 51 mm - min. trimming on all sides - 2.5 mm - number of working programs - 99 - adjustment time - approximately 10 s - max. speed - 200 bindings / h - weight - 680 kg - dimensions - 1520 x 1320 x 1450 mm - connection - 230 V, 50/60 Hz, 3-phase, 20 A or 380/415VAC, 50 Hz 3-phase

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06000511/001, These two vertical lift storage systems, model Kardex Shuttle XP 250-2150x864, version H/N55/N22D11B/N75D15/20, manufactured in 2006, with a permissible total load capacity of 2 x 32,900 kg and a permissible shelf load of 245 kg, will be auctioned off in our complete online auction "Kardex Vertical Lift Storage". Further details: Description Year of manufacture: 2006 Used Technical data Manufacturer: Kardex Produktion Deutschland GmbH Model: Shuttle XP 250 Type: Shuttle-XP-250-2150x864 Year of manufacture: 2006 System 1 • Serial number: 06000524/001 • Permissible shelf load: 245 kg per shelf • Permissible total load capacity: 2 × 33,250 kg System 2 • Serial number: 06000511/001 • Permissible shelf load: 245 kg per shelf • Permissible total load capacity: 2 × 32,900 kg Fjdpjz Eqatefx Akysgh Electrical data (per system) • Mains connection: 3/N/PE 400 V • Frequency: 50/60 Hz • Rated current: 17.0 A • Connection power: 8.6 kVA • CE marking available These systems are ideal for space-saving, safe, and efficient storage of tools, spare parts, small parts, as well as production and operating materials. The storage systems operate according to the proven "goods-to-man" principle. The requested shelves are automatically transported to the retrieval opening, which reduces search and travel distances and significantly increases efficiency in storage and production operations. The vertical design makes optimal use of the available hall height and achieves a high storage capacity in a small footprint. Condition An on-site inspection is recommended. Dismantling, loading, transport, and recommissioning are the responsibility of the buyer or will be arranged separately. As pictured Without any other items or components shown in the images Content, condition, and completeness are unverified Functionality is unverified

Condition: new, functionality: fully functional, Year of construction: 2025, fuel type: diesel, overall weight: 4,500 kg, color: green, Diesel forklift at a fair price Fodpfx Aksw Ew N Heysgh Perfectly suited for daily pallet transport as well as for loading and unloading. Capacity: 3500 kg Own weight: 4500 kg - Triplex mast - Side shifter Perfect for smaller commercial halls as well due to its excellent maneuverability.

Condition: new, functionality: fully functional, Year of construction: 2025, fuel type: electric, overall weight: 4,500 kg, color: green, Electric forklift at a fair price Perfectly designed for daily pallet transport as well as for loading and unloading. Fgodpfx Aew Ew R Rjkysh 3,500 kg lifting capacity 4,400 kg own weight - Triplex mast - Side shifter - 260Ah battery (430 kg) Perfect for smaller industrial halls due to its maneuverability.

Condition: used, machine/vehicle number: 0940, without hall piping Fsdpfxjrz Iq Ho Akyjgh

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 942 h, machine/vehicle number: GS3211C-829, load capacity: 227 kg, lifting height: 9,900 mm, platform length: 2,260 mm, platform width: 810 mm, overall weight: 1,984 kg, transport length: 2,400 mm, transport width: 810 mm, construction height: 7,900 mm, next inspection (TÜV): 01/2027, fuel type: electric, color: yellow, Equipment: UVV, Compact, battery-powered scissor lift for work in halls, warehouses, and buildings. With a width of 81 cm, it can pass through standard doors and be operated at full height. The proportional control allows for precise positioning. The tires leave no marks. Fsdsz Hm Rdepfx Akysgh

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Description (detailed specifications): o 5-axis stage o Modern, expandable user interface with EDX integration and image montage o SE detector o Scintillator-BSE detector o In-lens detector o Low-vacuum system with BSE detector o Fully software-integrated JEOL EDX system o In-column current measurement o Navigation camera o Live camera o Control panel o Desk, PC with Windows OS, 2 x 24" monitors, keyboard Fgedpjzn Ihpsfx Akysh

Condition: excellent (used), For sale: Professional Schneider Electric Masterpact NW25 H1 circuit breaker equipped with a Micrologic 5.0 A protection unit. This device is used in industrial power distribution systems—such as low-voltage switchboards, manufacturing plants, industrial halls, and power installations. The Masterpact NW series circuit breakers are designed for demanding industrial environments and provide reliable protection against overloads and short circuits. The unit is in very good visual and technical condition—the exact condition can be seen in the photos. Technical Specifications: Manufacturer: Schneider Electric Series: Masterpact NW Model: NW25 H1 Protection unit: Micrologic 5.0 A Rated current: 2500 A Insulation voltage: Ui 1000 V Impulse withstand voltage: Uimp 12 kV Operating voltage: up to 690 V AC Breaking capacity Icu: 65 kA Ics: 100% Icu Standard: IEC 60947-2 Frequency: 50 / 60 Hz Utilization category: AC23A Year of production: 2011 Assembly location: Schneider Electric Venray (Netherlands) The circuit breaker protects installations against overloads and short circuits, and allows for adjustment of protection parameters thanks to the Micrologic unit. Applications: • Low-voltage switchboards • Industrial facilities • Power installations • Energy distribution systems • Large machinery and production lines ✔ Robust industrial construction ✔ High breaking capacity ✔ Adjustable Micrologic protection settings Fjdpfx Asyua Amokyogh ✔ Equipment from the renowned manufacturer Schneider Electric

Condition: excellent (used), For sale: Professional lifting set: DEMAG chain hoist + VETTER travelling beam – complete kit High-quality German-made equipment, designed for industrial use. TECHNICAL DATA: Lifting capacity: 2000 kg (2 tons) Beam length: approx. 242 cm Hoist manufacturer: DEMAG Beam manufacturer: VETTER Fördertechnik Power supply: 400V, 3 phases, 50 Hz Year of manufacture: 1997 Lifting speeds: 2-speed (slow + fast) Fgodjy A Tgcepfx Akyoh Control: pendant remote (up/down + STOP) Chain: original, in good condition Trolley: manual (moves along the beam) DEMAG hoists are known for their industrial durability and reliability. SET INCLUDES: ✔ DEMAG chain hoist ✔ VETTER travelling beam (approx. 2.4 m) ✔ Manual trolley ✔ Control pendant (remote) ✔ Wiring ✔ Safety hook TECHNICAL CONDITION: unit in working order normal signs of use ready for operation without additional investment APPLICATIONS: workshops warehouses production halls service stations assembly work

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. Fgjdpez Et E Ejfx Akyjh The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: excellent (used), Corner sealing machine with shrink tunnel For sale is a professional, semi-automatic corner sealing machine with an integrated shrink tunnel from the Italian quality manufacturer Pactur. It is ideal for quickly and professionally shrink-wrapping cartons, books, bottles, textiles or other packaged goods in shrink film. The Ladypack 80/SI model is characterized by its enormous flexibility and very large sealing frame. It combines the sealing and shrinking processes in a compact, mobile unit, which saves a great deal of space in the production hall. Impulse sealing system: The corner sealer uses a Teflon-coated sealing bar. It produces clean, extremely tear-resistant seams without smoke development. Efficient shrink tunnel: The integrated tunnel has a closed recirculating air system with adjustable air deflection plates. This ensures a completely uniform heat distribution and a perfectly smooth shrink result – even with demanding product geometries. Precise digital control: The clear control panel allows the sealing time, cooling time of the sealing bar and the tunnel temperature to be precisely adjusted to the film thickness used (PO, PE or PVC). Heavy-duty conveyor belt: The tunnel is equipped with a durable, heat-resistant metal grid belt. Fgedpjz Dtf Aefx Akysh It reliably transports even heavy packaged goods (e.g. printed materials, canned goods or wooden parts). Ergonomic infeed table: The separate, mobile preparation table enables quick loading of products into the half-tube film. The film unwinding is smooth and easy thanks to ball bearings. Perfectly suitable for printing companies, logistics centers, laundries or contract packers for shrink-wrapping: - Cartons and multi-packs - Books, catalogs and stacks of magazines - Textiles and household goods - Bottle carriers and cans Technical data & equipment: Manufacturer: Pactur (Made in Italy) Model: Ladypack 80 series Type: Corner sealer & shrink tunnel combination Sealing frame dimensions: approx. 560 x 800 mm (for medium to large packaged goods) Control: Digital control unit for precise adjustment of sealing time and tunnel temperature Transport: Robust and heat-resistant metal grid belt in the shrink tunnel Power supply: 380 V / 3 phases Max. power consumption: 11.5 kW Mobility: The entire system and the separate infeed table are mounted on stable swivel casters Max. film roll width 700 mm Max. film roll diameter Ø 250 mm External dimensions (length x width x height): approx. 1,800 mm x 2,000 mm x 1,120 mm Max. product height: approx. 150 mm (due to the design in the tunnel passage) Net weight: approx. 400 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2011, Overview This Krones AirCo is an air conveyor for empty PET bottles, built at the end of 2011. The bottles hang by their neck ring and are driven by air from fan units along the conveyor. The installation runs over a total length of approx. 60 m with seven fan units, curves, a diverter and several declining sections. The conveyor sections hang from stainless steel support stands and run at ceiling level across the hall, so the floor beneath stays free for traffic and other machines. Technical data - Manufacturer: Krones - Model: AirCo - Year of manufacture: 2011 - Machine type: air conveyor, neck handling of empty PET bottles - Total conveyor length: approx. 60 m - Declining sections: 10 sections at 10°, approx. 16.8 m in total - Curves: 8 with radius 750 mm - 90° 2 x left, 2 x right; 45° left; 30° left; 15° left; 15° right - Fan units: 7, each with filter housing - Diverter: 1 Conveyor sections In the order of the plant layout: - Fan unit - Straight section 3,500 mm - Straight section 500 mm - Curve 45° left, radius 750 mm - Straight section 400 mm - Straight section 2,000 mm - Straight section 2,000 mm - Fan unit - Straight section 2,000 mm - Straight section 1,000 mm - Straight section 400 mm - Straight section 300 mm - Curve 30° left, radius 750 mm - Straight section 2,000 mm - Straight section 600 mm - Straight section 400 mm - Curve 15° left, radius 750 mm - Straight section 1,500 mm - Straight section 600 mm - Straight section 500 mm - Fan unit - Straight section 1,500 mm - Curve 15° right, radius 750 mm - Straight section 2,000 mm - Straight section 500 mm - Straight section 600 mm - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Declining section 2,000 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Straight section 1,500 mm - Curve 90° left, radius 750 mm - Straight section 1,500 mm - Fan unit - Straight section 2,000 mm - Straight section 2,000 mm - Straight section 400 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 750 mm - Straight section 400 mm - Fan unit - Declining section 2,000 mm at 10° - Declining section 750 mm at 10° Fedez I Tbrspfx Akysgh - Declining section 2,000 mm at 10° - Declining section 1,000 mm at 10° - Declining section 2,000 mm at 10° - Fan unit - Straight section 1,000 mm - Diverter - Curve 90° left, radius 750 mm - Fan unit - Straight section 2,000 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 1,500 mm - Straight section 720 mm Equipment - Stainless steel conveyor channels with neck guide rails - Stainless steel support stands and ceiling suspensions - Fan units with air filters - Sensors and pneumatic components along the conveyor - Plant layout drawing of the installation Condition Used, currently installed in the plant. The bottle unscrambler visible in some photos is not included. Dismantling and the exact scope of delivery are agreed during the offer stage. Availability Available immediately. Location: Germany.

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 622 h, machine/vehicle number: GS4610C-381, load capacity: 454 kg, lifting height: 790 mm, platform length: 226 mm, platform width: 115 mm, overall weight: 2,469 kg, empty load weight: 2,496 kg, transport length: 241 mm, transport width: 117 mm, construction height: 168 mm, next inspection (TÜV): 01/2027, fuel type: electric, color: yellow, Equipment: UVV, Electrically powered Genie GS-2646 scissor lift from our rental fleet, manufactured in 2011, used. Compact and emission-free, suitable for indoor and outdoor use on solid ground, e.g., for assembly, installation, maintenance, or hall construction. Fsdpfjz Ix Rxox Akyogh

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, GREAT PRICE!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine parts, tubes, shafts, but also eccentricity, e.g., of cams on a camshaft, or journals of a crankshaft. It is certainly also of interest to motorsport and tuning companies. Fgedpfx Ajzcqy Eekysh The first photo is a "representative image" from a Taylor Hobson catalog, showing its basic structure, except for the computer, which is a newer, more modern HP model with a small form factor. Max. diameter 350 mm Max. test piece height 500 mm (higher measurements are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece +/- 5 mm Max. weight of the test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg, where it was used in a "medically clean environment"; it is extremely clean. It has never been in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measuring software is, of course, included and runs on the included HP computer (without a password...). It is also on the USB stick, perhaps to install it on another machine at your location. Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all wiring diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets by a freight forwarder. It is already well secured on the pallets. The Talyrond 265 and the desk will be wrapped very well with bubble wrap, etc., and secured with stretch film for transport; the system itself is fixed with "transport safety screws." Shipping is at the buyer's expense and will be done on two Euro pallets. The measuring system should definitely be set up and commissioned by a Taylor Hobson service technician, who will also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during setup and commissioning. For example, there are several locking screws installed for transport; if you forget them, the system could be damaged when it starts up. A truly well-maintained, very accurate system that will provide many more years of excellent service!!