Used Mobile Edge Anleimen Machine for sale (87,438)

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. Itedpfx Ajfbr S Reffer • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), functionality: fully functional, De Stefani MVT Edge Sander 1 sanding unit Maximum workpiece height: 80 mm Sanding unit motor: 1.5 kW Sanding belt speed adjustable via inverter Self-tensioning sanding unit Manual adjustment of the sanding unit Manual adjustment of the unit angle Sanding unit with oscillation Itjdox H Si Djpfx Affsr Feed speed adjustable via variator Feed motor power: 0.74 kW

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 The upper section is of heavy cast construction with an integrated three-phase motor, 380 V, 2.2 kW, 2850 rpm. The machine is equipped with a built-in switch-plug combination; motor protection switch and main switch in accordance with VDE regulations. Dimensions of the sanding belt backing: 850 x 150 mm. The steel table height is adjustable via spring pressure. Belt size: 150 x 2280 mm. The sanding belt backing is coated with a graphite glide pad. The machine is delivered with an assortment of sanding belts. Additionally, the scope of delivery includes a mitre and angle guide. When connected to a central extraction system and with a minimum air speed of 20 m/s, the machine is dust-tested (GS) by Holz-BG-Stuttgart. Standard features: - Swivel range 90–180° - Motorized belt oscillation - Small support table at the deflection roller - Pneumatic belt tensioning Technical data: Motor power: 2.2 kW Belt size: 150 x 2280 mm Belt speed: 22 m/sec Table size: 750 x 350 mm Space requirement: 1000 x 800 mm Weight: from 180 kg Extraction connection diameter: 100 & 80 mm Availability: short-term Location: Flörsheim Iedew I Uqxjpfx Affetr

Condition: used, Year of construction: 1996, Plate running direction: from operator to the left Max. edge thickness: 8.0 mm Min. workpiece width: 70 mm Feed speed: 11 m/min Heating-up time: 4.5 min Automatic roll magazine: Yes Cutting shears up to: 0.2 - 3.0 mm Individual edge feed: Yes Automatic gluing: Glue pot with granulate on top Cut-off saw: fixed at 90° Flush-milling unit: Yes Combination milling unit: Yes Aggregate display: glue display Isdpfxsxwdp Uo Affetr Control type: manual Operation: selector switch / push buttons Travel device: Yes Protective hood: Yes Working height or infeed table height: 870 mm Approx. weight: 670 kg Dimensions: 3600 x 1400 x 1200 mm Motor power: 11 kW Extraction diameter: 120 mm Storage location: Supplier

Condition: good (used), Year of construction: 1991, Edge banding machine for shaped parts, edge bander, edge banding machine Itsdpjb A Ninofx Affer -Workpiece thickness: 10-85 mm -Heating fan: 6 kW, pre-coated edges -Cutting knife -Edge plate -Transport dimensions: 900/700/H1080 mm -Weight: 135 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 98 h, machine/vehicle number: 17000-23051522412, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, laser source manufacturer: Epilog, laser hours: 97 h, laser power: 60 W, table length: 1,003 mm, table height: 673 mm, working length: 610 mm, working width: 305 mm, workpiece weight (max.): 63 kg, type of cooling: air, overall weight: 63 kg, total length: 1,003 mm, total width: 673 mm, total height: 455 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Laser engraver in excellent condition, supplied with a professional extraction unit and professional compressor. The system is totally complete and fully functional, virtually like-new (97 hours of operation). Business closed due to bereavement. Dimensions & Capabilities Working area (X × Y × Z): 610 × 305 mm Machine dimensions (L × W × H): approx. 1003 × 673 × 455 mm (39.5 × 26.5 × 17.9 in) Weight: approx. 63 kg (138 lbs) Laser Options Available type: CO₂ (metal/ceramic tube, air-cooled, 10.6 µm) with 60 W of power Speed & Precision Max. speed: 120 IPS (≈3.05 m/s) with 5 G acceleration Resolution: adjustable from 75 to 1,200 dpi Software & Memory Software interface: Laser Dashboard™ and Epilog Job Manager™ Internal memory: up to 1 GB, allows for jobs of any file size Control Features & Mechanical Construction Operation modes: raster, vector, or optimized combined mode Motors: DC brushless servo motors with rotary encoders for precise positioning Guide structure: * X-axis: polished stainless steel bearings with Teflon coating * Belts: double-width Kevlar type B for high accuracy Camera & Display Isdpsw Hg Nfofx Affjtr IRIS™ system: integrated overhead camera for visual job placement directly onto the laser table 7″ LED touchscreen on the machine for job selection and direct autofocus Connectivity & Power Supply Connections: USB, Ethernet and optional wireless (Wi-Fi), compatible with Windows 7/8/10/11 Electrical supply: auto-switching 100–240 V, single-phase 50/60 Hz; max amperage ≈13 A (or ≈6.5 A depending on region) Ventilation & Safety Extraction requirements: external venting or internal filtration unit, airflow of 350–400 CFM (≈595–680 m³/h), single 4″ (102 mm) exhaust *Safety standard: Class 2 laser product (≤1 mW, 600–700 nm)

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning Itjdpfx Asc Tmygeffjr edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 2014, operating hours: 50,000 h, functionality: fully functional, machine/vehicle number: 2014.03.23, total length: 8,000 mm, total width: 2,200 mm, total height: 1,700 mm, type of input current: AC, input voltage: 400 V, space requirement length: 800 mm, power: 40 kW (54.38 HP), working width: 60 mm, product height (max.): 60 mm, 2 machines availible for narrow, longitudinal piece sanding construction: 3x left & 3x right - horisontal, paper sanding 360' vertical radius corner sanding 1x left & 1x right brushing speed approx 5m/min Isdpfev T U A Ujx Affjtr

Condition: excellent (used), Catalogue number: 7531 TECHNICAL DATA Equipment: - Disc - Tape feeder - Guillotine - Glue tank (granulate) Isdpovtl Tqefx Affjtr - 3 pressure rollers - Trimming unit with final saws - 2 milling units for edge shaping (radius cutters) - 2 polishers Minimum length of workpiece: 140mm Minimum width of workpiece: 60mm Thickness of the edged workpiece: 10-55mm Edgebanding tape thickness: 0.4-3mm Extendable support from the table Motor power: 5.6kW Extraction port diameter: 120mm Dimensions (L/W/H): 3480x1050x1020mm Weight approx.: 900kg - Not repainted - Austrian manufacture - Year of production: 2007 - Condition: very good - Used edgebander Net price: 18,900 PLN Net price: 4,500 EUR Net price calculated with an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1000023523, Biesse Stream B MDS 2.0/15.0 is a single-sided edge banding center with automatic device with manual feeding to dimension and square panels in flexible way bу 4 run. Main technical data Сhаin advance speed: 10-25 m/min Panel length: 250-2700 mm Panel width: 120-1200 mm Panel thickness: 10-60 Panel weight: 75 kg Edge thickness: 0,3-3,0 mm Gluing unit: PU gluing kit, installed in place of to the standard device(EVA). Iedpfepz Shkex Affjtr The machine is equipped with a tool for processing edges with a radius R=1/1.5/2.0mm and a chamfer of 25 degrees. Technical condition: the machine is currently used in production.

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2022 Features and technical data: - Continuously inclinable sanding unit (0 - 90°) for vertical and horizontal sanding - Oscillating sanding belt for improved sanding results and increased belt service life - Fast and easy sanding belt change via quick-release system - Standard sanding pad with graphite coating for increased belt service life - Height-adjustable, robust worktable made of cast iron with T-slot, supported by spring suspension Iedpfx Aex Hbrzoffetr - Smooth height adjustment of the table by means of gas pressure springs - Including lateral sanding sleeve device for sanding curves and radii - Including continuously adjustable mitre fence - Two extraction ports Ø 100 mm - Sanding sleeve device including three rubber rollers (Ø 38/50/76 mm), three sanding sleeves (sanding width: 100 mm), four insert rings and height-adjustable table with extraction device - Table insert with slots for optimum dust extraction - Continuously tiltable sanding unit from 0 - 90° - Indexing at 0°/22.5°/45°/67.5°/90° - With rubberised sanding roller and graphite coating on the sanding pad - Standard with second emergency stop switch on top of the sanding unit - The continuously inclinable sanding unit enables a wide range of sanding applications, e.g. vertical and horizontal sanding - Sanding belt length: 2,270 mm - Sanding belt width: 150 mm - Belt speed: 16 m/s - Sanding area length: 770 mm - Sanding area width: 150 mm - Longitudinal table length: 680 mm - Longitudinal table width: 310 mm - Longitudinal table height adjustment: 130 mm - Cross table height min.: 920 mm - Extraction port diameter: 100 / 100 mm - Supply voltage: 400 V - Phases: 3 Ph - Mains frequency: 50 Hz - Power requirement: 2.1 kW - Fuse protection: 10 A Dimensions: 1,350 x 585 x 1,210 mm Weight: approx. 162 kg Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Year of construction: 2004, condition: used, 0-8 mm length 4.770 mm Itodpfen N H A Nox Affer feed 11 m/min

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Glue application with fin nozzle Itodpfx Asbahd Eoffsr Air pressure 6 bar length 3750 mm

Year of construction: 2009, condition: good (used), KAL 210 with ZHR05 Itodpfx Afom Udzrefsr The machine is still built and can be demonstrated if needed. The machine is maintained and is still in use and produces a good quality. To be sold due to new acquisition. Available after arrangement. Further information gladly at any time. The machine is located in Nuremberg.

Condition: like new (used), Year of construction: 2022, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 13322, Edge grinding machine for straight edges model MUSAnext for processing natural stone Grinding and polishing of straight edges with upper and lower chamfers, Calibration and regrinding of workpiece surfaces, Milling of water grooves and grooves on the face, Milling of half or quarter round bar profiles Torsion-resistant steel frame as a monoblock for installation on a stable hall floor Sandblasted machine frame, cathodically galvanized, primed with epoxy zinc paint and painted with polyacrylic paint Electrical control cabinet integrated into the machine frame Machine components painted using the cataphoresis process for optimum corrosion protection Stainless steel splash guards Service water drip tray with side drains Automatic central grease lubrication 2 water valves for automatically controlled water supply for end faces and bevel grinding supports Conveyor belt with wedge for precise longitudinal guidance, width 600 mm Conveyor belt support on the machine frame made of stainless steel Adjustable conveyor belt speed 0 - 250 cm/min on the operator panel Dynamic conveyor belt speed for increased feed rate when feeding in and out workpieces Flushing device for inside and outside of conveyor belt Workpiece stop roller bar at the belt infeed for precise alignment of the workpieces Belt running direction from left to right Table working height 780 mm Table extension console can be swiveled manually, rollers offset in two rows arranged with additional extension of 1.5 meters Pneumatically height-adjustable workpiece pressure rollers, which enable processing of different workpiece thicknesses without additional manual adjustments Operator panel with 8" touchscreen Programming of switch-on and switch-off times for each support Programmable machining length of end faces and chamfers Workpiece length measurement with automatic spiral step system Magnetic sensor for detecting the workpiece thickness, for automatic positioning of each support with automatic height adjustment MAT sensor for cross reinforcements, automatically detects the height and number of cross reinforcements and controls the pneumatic pressure cylinders Itjdpotzp T Hsfx Affor

Condition: used, Edgebanding machine Tempora F 60.06 - Year of manufacture: 2018 - Jointing cutter, radius cutter, scraper for radii and surfaces - Cleaning and release agents - Spray device - Edge thickness: 0.4-6 mm - Installation length: 3220 mm Iodpfxox Ha I Uj Affotr - Sawing/trimming unit

Condition: used, Compact Hebrock EURO 3001 edge banding machine for precise edge banding of panel material. The machine enables clean edge processing thanks to automatic glue application, pressure rollers, and finishing units. Ideal for furniture and interior design. Technical specifications subject to change. Iedpfjxdc D Rox Affotr Unit 1: Glue application Unit 2: caps Unit 3: Flush milling workpiece height: approx. 10 – 40 mm edge thickness: max. approx. 12 mm feed rate: approx. 10 m/min

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips/lippings (Min/max) mm 3 / 10 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system) Distance (center-axes) of the Disappearing Dogs (mm) 1080 SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x kW 8) Free Space (for Milling unit) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 04.1570 + 283.205 Band Pressure zone - Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) speed 30 m/min (0° - 25) Fine Trimming unit 08.055 (2 x Kw 1) / 0° - 30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) with servo-motors Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Isdpfed Nt Rqsx Affotr Buffing unit 08.617-4 (4 x Kw 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270°

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg Iedpfx Afshy Tlrsfstr total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Thicknesser or planing machine for smoothing and flattening (planning) of woods including adjustable angle fence, protective devices and accessories. Isdpfxox Eykgo Affetr working width: 500 mm Knife system: planer blade Z4

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Ijdpfx Aju Ekbneffjtr Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm Isdpfx Aec S Di Rsffjtr brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: excellent (used), Edge trimming machine Ijdpfxowiwnqe Affetr Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: new, Hebrock Model F 2 next Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special offer price and full manufacturer warranty. The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm milling depth), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touch screen) Hot melt glue application to the workpiece for edgebanding material up to 3 mm jointing cutter (incl. slide - tool) up to 2 mm milling depth maintenance-free glue basin with change basin pre-equipment incl. glue discharge device HF crosscut saw station (approx. 12000 rpm) HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version) robust chain drive ball bearing mounted double roller top pressure viewing window from rear side of machine extractable workpiece support Including special equipment: F2/12 surface scraper (incl. pneum. lift) F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling) F2/27 Nesting for milling stations Itedpsl D Rp Eefx Affer

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine Itsdslc Ewiopfx Affor milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg