Used Mk5 for sale (196)

Condition: good (used), face driver, face driver, face driver, driver tip, face driver, face driver, roller tip -Manufacturer: Neidlein, face driver mount: MK5 -Type: OEX 5 -Front dimension: Ø 39 mm -Dimensions: Ø 75 x 185 mm -Weight: 2.6 kg Itodpfju Tlg Eox Ahbjn

Condition: good (used), revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center center -Manufacturer: Röhm, rotating centering tip type 110 H -Barrel tip: shaft-mounted Iodsrp Ilaepfx Ahbetn -Recording: MK5 -Quantity: 1x centering tip available -Price per piece -Dimensions: Ø 90/257 mm -Weight: 4.4 kg

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Standard Equipment and Accessories - Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point) * Capability to store up to 1000 programs with associated images * Capability to store up to 1000 different tools with associated images * USB port * Ready for network connection - Operator aid on the electronic control, including: * Tool database management * Display of coordinates at 3 points on the tool for new reference (zero) point determination * Management of tool edge speed * Operator support for common machining tasks - "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable. - Aluminium fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface - Electrical pre-wiring for a power feed unit - Spindle rotation direction: right/left - Automatic motor start - Version M-E includes: * Electrospindle with max. performance from 3,400 rpm * Electrospindle power 7.5 kW (10 HP) [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling guard, max. tool diameter 160 mm - Electronic motor brake effective even without mains power - Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder - Electropneumatic spindle lock - Microsafety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - Control circuit 24V - CE Declaration of Conformity - Frequency 50 Hz - Base - MACHINE LANGUAGE: German - Standard safety regulations Isdpex Nbzuofx Ahbetn - Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table. - Voltage 400 V, EU - Quick tool clamping system "T-SET" Allows clamping/unclamping of tools via easy application with a compressed air gun. - L'invincibile TI 5 CE version - "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - Milling spindle diameter 30 mm Availability: short-term

Condition: new, Year of construction: 2026, functionality: fully functional, New KAO MING hydraulic radial drilling machine, year of construction 2026. Specifications: Maximum distance between spindle center and column face: 1250mm Minimum distance between spindle center and column center: 360mm Column diameter: 350mm Column height: 2685mm Base floor space: 2035x840mm Total floor space: 2335x1140mm Base height: 188mm Spindle head longitudinal travel: 890mm Vertical arm travel: 700mm Spindle travel: 300mm Spindle taper: MK5 Table work area: 1393x820mm Main spindle motor: 3.7kW (5hp) Spindle speeds: 25–1310rpm (12 steps) Feed range: 0.06mm/rev to 1.12mm/rev (12 steps) Ijdpfx Ajykkhxehbstn Drilling capacity in cast iron: 60mm Drilling capacity in steel FC20/S45C: 50mm Weight: 3460kg

Condition: like new (used), as-new centers and sleeves, MK5 (sleeves and centers with carbide insert) Iodpfx Ajzv Sd Dshbotn

Condition: used, grinding diameter 350,450 mm grinding length 600 mm centre height 175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±10 ° longitudinal feed of the table 900 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Foto von bereits gelieferter Maschine mit eventuell anderen Optionen. Maschine hat Zentralschmierung und Rollenführung in der Flachbahn der x-Achse sowie Luftabhebung im Schleifspindelstock serienmäßig. BEMA Standard serienmäßig: -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my -Drehzahlanzeige Schleifspindel -Stufenlose Drehzahl Schleifspindel 70-100% -Stufenlose Drehzahl Innenschleifspindel 70-100% -Werkstückspindelantrieb durch Drehstrommotor stufenlos regelbar über Frequenzumrichter Mögliche Optionen gegen Aufpreis: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Sinuslineal Itedpfxed Ih D Eo Ahbon -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel Inklusive: -Bedienwerkzeug -Spannrohr für Futter Natürlich erhalten Sie auf unsere generalüberhalten Maschinen 12 Monate Gewährleistung. (Nur Anrainerstaaten) weiteres Zubehör auf Anfrage. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln

Condition: used, grinding diameter 250,350,450 mm grinding length 1500 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ± 6 ° longitudinal feed of the table 1750 mm table speeds 0,02-6 m/min 130/150 kg 130 inkl. Spannugkg kg 80 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 5,6 x 2,0 m Overhauled with geometric KELLENBERGER protocoll. Pictures of a similar 1000mm machine. -New electrical cabinet -Modern workhead -Modern tailstock -Modern hydraulic power unit -air lift for grindingwheeel head -modern internal grinding device Extension of the upper table swivel to 10° Optional: -Swivel angle digital read out upper table -Swivel angle digital read out workhead -Swivel angle digital read out grindingwhell head -Splash protection door z-axis -Splash protection housing x-axis etc. ADDITIONAL: -we can offer service for the machines -we can offer technical advice -we can offer training -we have spare parts Itsdpsd Ih Dwofx Ahbjn -we have accessories

Condition: used, grinding diameter 250,350,450 mm grinding length 600 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±10 ° longitudinal feed of the table 900 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm Iedpfx Asd Ih D Rohbstn total power requirement 6,5 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 3,1 x 2,0 m Compete overhauled machine according to Kellenberger new machine protocoll -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel Inklusive: -Bedienwerkzeug -Spannrohr für Futter -Spitze MK3 -Spitze MK5 -Futterflansch weiteres Zubehör auf Anfrage. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, grinding diameter 250,350,450 mm grinding length 1000 mm centre height 125,175,225 mm grinding wheel diameter 400 mm Itjdpfxjd Ih D Hs Ahbsn grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±8 ° longitudinal feed of the table 1300 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 4,2 x 2,0 m Foto von baugleicher Maschine in Spitzenhöhe 225mm Version R: Maschine hat Zentralschmierung und Rollenführung in der Flachbahn der x-Achse sowie Luftabhebung im Schleifspindelstock. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel -Papierbandfilter Inklusive: -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage.

Condition: used, Year of construction: 1979, taper MK MK5 round table ja weight of the machine ca. 1.200 kg +++++ Itsdpfof Ek Rijx Ahben Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 610 mm turning dia. over face-slide: 350 mm swing diameter over bed: 610 mm centre distance: 1390 mm control: Fanuc 0i-Mate TC x-axis: plan: ca. 305 mm z-axis: längs: ca. 1350 mm revolution per minute: 22 - 2200 U/min feed:: X + Z-Achse: 5 / 10 m/min. spindle bore: Ø 70 mm tool turret - number of stations: 6 tailstock quill taper MT: MK5 tailstock quill stroke: 150 mm Itedpfx Aheu Ix I Usben Weight approx.: 2,7 t total power requirement: 15 kW dimension machine xH: 3,7 x 1,7 x 1,7 m dimensions of hydaulic: 630 x 460 x 900 mm other features: -hydr. chuck TONFAU Ø 300mm -hydraulics -Coolant system -control panel -double foot switch accessories: -div. mold jaws -div. soft jaws -6 footrests *

Condition: used, Hidromek HMK520LC-5, lightly used demo machine (169 hours) The machine is equipped with: SMP105 quick coupler Hammer-Slope-Shear hydraulics Strigin safety glass C-lubrication system D-heater Side/Rear camera Additional equipment Variable-width undercarriage (transport width 3000 mm) AdBlue system Tank pump Air conditioning Radio/AUX/USB Smartlink GT Trading is the importer of Hidromek and Airman machines in Sweden. We always have used construction machines in stock and gladly accept trade-ins. Visit us: Iedpfx Ahsz Rpznobjtn Ullevivägen 30, Bro, Stockholm, 19740 Borrvägen 12, Nacksta, Sundsvall, 12853 Contact us for more information! Josef Said Henrik Törnblom Technical data: Year of manufacture: 2023 Operating hours: 169 h Weight: 55,000 kg Engine manufacturer: Isuzu Drive type: Diesel Location: Bro, Stockholm County, Sweden

Condition: used, RENTAL MACHINE – available for rent, not for sale. Hidromek HMK520LC-5 *For rent* Weight: 54 tons The machine is equipped with: SMP105 quick coupler Hammer-Slope-Shear hydraulics Strigin safety guard C-grease lubrication system D-heater Side/rear camera Iodpez Rpzuefx Ahbstn Extra Adjustable undercarriage (transport width 3000 mm) AdBlue Diesel pump Air conditioning Radio/AUX/USB Contact us for more information! Tomas Eriksson Technical data: Year of manufacture: 2023 Weight: 55,000 kg Engine manufacturer: Isuzu Emission stage: Stage V Drive type: Gas Location: Bro, Stockholm County, Sweden

Condition: new, Year of construction: 2026, Center distance 1500 mm Center height 210 mm Swing over bed 500 mm Swing over cavity 710 mm Swing over bed slide 300 mm Bed width 405 mm Spindle bore 82 mm (D8) Spindle taper 90-(1:20) Speed ​​range 9 – 1600 rpm Maximum tool size 25 × 25 mm Longitudinal feed range 0.028 – 6.43 mm Cross feed range 0.012 – 2.73 mm Metric thread 0.5 – 224 mm / 48 ranges Inch thread 56 – 1/4 TPI / 45 ranges Modular thread 0.5 – 112 mm / 42 steps DP 56 thread – 1/4 DP / 45 steps Center diameter 75 mm Center travel 150 mm Tailstock taper MK5 Motor power (S1/S6) 7.5 / 9 kW (10 HP) Pump power (S1/S6) 0.1 / 0.12 kW Machine dimensions (L × W × H) 2700 × 1150 × 1800 mm Itsdpfszr I H Hex Ahbjn Weight 2850 kg A larger model is available, 660 x 2000 mm, priced at €14,800 net.

Condition: used, Year of construction: 1970, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 1000 mm center height measured in bed: 250 mm centre distance: 1000 mm revolution per minute: 18...1800 / 21 step U/min spindle bore of work spindle: 56 mm tailstock quill adjustment:: 180 mm longitudinal feeds:: 0,08 - 3,26 mm/U cross feed: 0,04 - 1,63 mm/U Rapid feed X axis: 4,2 m/min. total power requirement: 7,5 kW weight of the machine ca.: 2,9 t dimension machine xH: 2,6 x 1,1 x 1,3 m Itsdpfsvvrpkex Ahben 4-jaw chuckØ 250mm with internal jaws live center in tailstock 4-fold quick-clamping tool holder coolant system Accessories: various reduction sleeves MK3-MK5-MK4 revolving tip "Clamping heart" 3-jaw chuck Ø 250mm with inner jaws The machine does not comply with APR (accident preventing regulations) *

Condition: used, grinding diameter 350 mm grinding length 600 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm Itedpfxjuxft Es Ahben MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-9,99 mm/Ø 0-9,99 mm/Ø ±10 ° longitudinal feed of the table 1100 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of already delivered machine in centre distance 1000mm. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Bruckner, rotating centering point centering cone Itodpfxsv T T Ipo Ahbon -Type: unfortunately without type designation -Recording: MK5 -Centering tip: Ø mm -Dimensions: Ø 95 x 295 mm -Weight: 6 kg

Condition: good (used), fixed point, fixed center point, fixed morse taper, fixed centering point, centering points Iodpfshfxl Hex Ahbotn -Manufacturer: WMW ABW, fixed center point -Adjustment: Morse taper MK5 -Number: 9x center points available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg / pc.

Condition: used, grinding diameter 250,350,450 mm grinding length 1500 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ± 6 ° longitudinal feed of the table 1750 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg Iodpfx Ahed Ih Dvjbotn 80 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 5,6 x 2,0 m Overhauled machine according to Kellenberger new machine protocoll

Condition: used, internal diameter 340/440 mm grinding depth 99999 mm grinding diameter 250,350,450 mm grinding length 600 mm centre height 125,175,225 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±10 ° longitudinal feed of the table 900 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.geometrical overhauled and repainted with: -Neuem CE konformem Schaltschrank. -Neuem Werkstückspindelmotor und Regler in Drehstromtechnik. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm Itsdjd Ih Dxepfx Ahbon -Drehzahlregelung für die Schleifspindel Inklusive: -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, year of last overhaul: 2026, Drill grinding machine suitable for grinding/sharpening twist drills, countersinks, etc. with 2, 3, or 4 cutting edges, with diameters from 5 to 75 mm. The machine has been mechanically and technically overhauled, wearing parts replaced, grinding spindle new, newly painted. The machine features automatic feed including end stop. Accessories: - Reducing sleeves MK5/MK4/MK3/MK2/MK1 including new quick-action chuck for small diameters Itjdpfxoydc Hto Ahbsn - Diamond dresser - Operating manual - Ejector tool for MK5 to MK1 - Coolant system, new including new coolant pump - Machine LED light, new The machine can be tested under power or inspected upon request. Operating voltage: three-phase current

Condition: new, Year of construction: 2026, Nieuw in het programma van LTC, metaaldraaibank LTC DR 750 G. Geschikt voor werkplaats en hobby. Volledig tandwielgeschakelde aandrijving van hoofdas. Dit vergroot het over te brengen vermogen in de lage toeren t.o.v. variabel aangedreven hoofdas. Ook een voordeel is het wisselen van toerental. Dit gebeurt aan voorzijde schakelkast d.m.v. schakelhendels. Dus geen riem verleggen. Verder is de voedingskast compleet voorzien van tandwielen. Ook hiervoor geldt dat het wisselen van voedings snelheid of spoed schroefdraad gebeurt door schakelhendels aan voorzijde nortonkast. Dus geen gewissel met wisselwielen. Met inductiegehard en geslepen prismabed. CE uitgerust. Metaaldraaibank word standaard geleverd met: Drieklauw 160mm Vierklauw 160mm Ijdpfx Aoigkv Eohbjtn Spanenbak en achterscherm Onderstel Langsvoeding Dwarsvoeding 4-slag beitelhouder Vaste en meelopende bril Led verlichting Separate noodstop Toebehorenkist met wisselwielen, vaste centers, oliespuit etc. NIEUW: nu ook met koelinrichting Optioneel: Snelwisselbeitelhouder Digitale uitlezing Sino Draaibank is van prima kwaliteit. Machine is te bezichtigen op afspraak, met uitleg en demo. Met 1 jaar fabrieksgarantie. Verder verlenen wij prima service en zijn onderdelen van machine beschikbaar. Prijs is € 2550,00 ex btw Met Sino € 2850,00 ex btw Leverbaar in 230V en 400V. Motor 1,1kw Afstand tussen centers 750mm Opname losse kop MK3 Verplaatsing pinole 80mm Doorlaat hoofdas 38mm Spindelopname hoofdas MK5 Draadsnijden metrisch: 18 standen van 0,2 - 3,5mm/omw Draadsnijden inch: 39 standen van 4 1/2-48 1/n" Draadsnijden moduul: 18 standen van 0,2 - 1,5mm Draadsnijden pitch: 24 standen van 16 - 120 1/n" Draaidiameter over bed 320mm Draaidiameter support 195mm Dwarsverplaatsing support 200mm Toerental spindel 90-1800 omw/min Verplaatsing beitelsupport 120mm Voedingsbereik langs 0,05-0,35 mm/omw (12 traps) Netto gewicht 320 kg Voltage 230V en 400V Afmetingen (opgebouwd) LxBxH 1.46x0.75x1.28M (met Sino 1.52M hoog)

Condition: good (used), Year of construction: 1956, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Meuser, lead screw and feed screw lathe type M3A -Turning length: 1400 mm -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm Itsdpfx Ahjh Uuzysbjn -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm

Condition: used, Technical details: turning diameter over bed: 560 mm turning diameter over support: 280 mm turning length: 2000 mm centre height: 280 mm centre distance: 1600 mm spindle bore of work spindle: 65 mm range of revolution per miute: 9...1800 / 24 step U/min longitudinal feeds:: 0,025-0,09 mm/U cross feed: 0,012-0,045 mm/U tailstock quill adjustment:: 225 mm tailstock taper MT: MK5 total power requirement: 18 kW weight of the machine ca.: 3,8 t dimension machine xH: 3,7 x 1,6 x 2,05 m Three-jaw chuck D=320mm Top slide rotatable 45 degrees right and left Itsdpfjwa I Shjx Ahben *

Year of construction: 2000, condition: used, turning diameter 530 mm turning length 1500 mm control Fagor centre height 260 mm swing diameter 475 mm swing diameter over flat guideway 530 mm swing diameter over bed slide 315 mm bed width 350 mm spindle bore 80 mm spindle taper innen MK5 turning speeds 2 turning speed range 0-650/650-2500 U/min feed range 0 - 7000 mm/min rapid traverse 10 m/min diameter of quill 72 mm Itodjiu A Dajpfx Ahben quill travel 180 mm weight of the machine ca. ca. 3,5 t dimensions of the machine ca. L/B/H 3,50x1,50x180 m