Used Mk5 for sale (197)

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-40 mm/Ø 0-40 mm/Ø ±6,5 ° longitudinal feed of the table 1530 mm table speeds 0,02-6 m/min 130 kg cross travel max. 270 mm 130 inkl. Spannung kg 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of machine already delivered with special options -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Hnjdpfx Aouxftrsitju Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: good (used), Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, clip-on holders, 4 pieces -Recording: MK5 Hnjdszbiq Topfx Aitou -Type/Sizes: see photos -Submission/Price: complete -Transport dimensions: 530/320/H60 mm -Weight: 18.4 kg

Condition: used, Year of construction: 1981, Table size: 1200 x 1000 mm Hjdpfxjx It Auj Aitsnu Table height: 850 mm Swivel range: -5° to +45° Milling speeds: 3000/4000/5000/6000/8000/10000 rpm Vertical adjustment: 120 mm Tool holder: MK5 Includes: integral stop Includes: 3-roller feed mechanism Weight: approx. 1000 kg Location: Nattheim

Condition: good (used), Reamer, twist drill, drill bit Hnedpfx Aiex R Sz Iotju -Twist drill: Ø 75 mm -Recording: MK5 -on request: different sizes/quantities available from further stock -Dimensions: Ø 75 x 600 mm -Weight: 8.6 kg

Condition: good (used), live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper Hnodpfsx H Ivgex Aitou -Traversing centering tip: MK5 mount, 2 pieces -Type: 1x without type designation / 1x IAMU-BLAJ-CM5-STAS-7628-74 -Price/Fee: complete -Transport dimensions: 267/180/H90 mm -Total weight: 7.6 kg

Condition: excellent (used), mileage: 78,049 km, power: 368 kW (500.34 HP), gearing type: automatic, fuel type: diesel, overall weight: 60,000 kg, empty load weight: 60,000 kg, axle configuration: 10x8, first registration: 08/2007, operating hours: 4,584 h, total length: 16,650 mm, total width: 2,550 mm, total height: 4,000 mm, number of cylinders: 6, fuel: diesel, nominal power: 368 kW (500.34 HP), Equipment: crane, electric window regulation, retarder, Key Features Internal Reference: 26096M Chassis Number: W09 550 000 7EL 050 58 Serial Number: 925.594.805 Vehicle Model: MK100-UMK500 / Swiss-Vehicle Vehicle Make: Liebherr Product Category: Mobile Construction Crane, Crane Carrier Condition: Used Mileage: 78049 Hours: 4584 Date of Initial Registration: 08.08.2007 Last Inspection (MFK or TÜV): 25.08.2022 Fuel: Diesel Overall Vehicle Condition: very good Engine Power: 500 Transmission Type: Fully Automatic Cylinders: 6 Suspension: Steel-Steel Hydraulic System: Additional Hydraulics Retarder / Intarder: Yes Cab Vehicle Equipment: Electric Windows, Crane, Radio Number of Seats: 2 Air Conditioning: No air conditioning Axles & Tires Axle Configuration: 10x8 Axle 1: 385/95 R22.50 Hnedpfx Aiez Hpxkotou Axle 2: 385/95 R22.50 Axle 3: 385/95 R22.50 Axle 4: 385/95 R22.50 Axle 5: 385/95 R22.50 Number of Axles: 5 Weights & Dimensions Gross Vehicle Weight: 60000 Unladen Weight: 60000 Vehicle Height: 4000 Vehicle Length: 16650 Vehicle Width: 2550 Superstructure Superstructure Manufacturer: Liebherr Superstructure Model: MK Superstructure Year of Manufacture: 2007 Superstructure Equipment: Cabin Control Superstructure Note: Upper carriage hours: 14,000 Maximum Lifting Capacity: (at short radius): 8t Capacity at Maximum Radius: 1.6t Maximum Radius: 52m Maximum Hook Height (horizontal): 33m Maximum Hook Height (inclined): 58m Gross Vehicle Weight: 60 tons Carrier Engine: Liebherr D836 A8 / D 846 A7 Transmission: ZF Ecogsplit 16S/152 Crane Crane Equipment: Gas extension, Start Stop Crane Manufacturer: Liebherr Crane Type: MK100 Crane Lifting Moment: 100 tons Crane Year: 2007 Crane Reach (m): 52.00 Crane Winch: Yes Crane Remote Control: Yes

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a CNC controled universal cylindrical grinding machine EMAG Weiss W 11 CNC. The machine is suitable for external-interna- face and cylindrical grinding. The W 11 CNC cylindrical grinding machine is perfect for one-offs- / prototype- and serial production. This cylindrical grinding machine is also used for sample production in the field of training and maintenance. CONTROL Eckelmann Hnsdpfx Aior Ey Huetou TECHNICAL DATA Workpiece length: max. 1.500 mm Center height: 200 mm | Option 320 mm Workpiece weight: 250 kg Workhead: MK 4 | Option MK5 / MK6 Tailstock: MK 4 TOOL CARRIER Single wheel straight / incliend, but also possible 2 wheels on B-axis combined with internal grinding spindle. Price, delivery time and equipment of the machine according to agreement.

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-9,99 mm/Ø 0-9,99 mm/Ø ±8 ° longitudinal feed of the table 1100 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of already delivered machine in centre distance 1000mm. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Hedpfx Aijuxfupetjnu Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hjdpfx Aioy Erzdotjnu Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines in stock, available for immediate export. For example: 10 units welding machines, CLOOS, ESS etc. 2x HITACHI SEIKI CNC lathes

Condition: used, mileage: 49,816 km, power: 85 kW (115.57 HP), first registration: 09/2022, fuel type: electric, empty load weight: 2,766 kg, overall weight: 3,500 kg, wheelbase: 3,924 mm, fuel: electricity, color: white, driver cabin: other, gearing type: automatic, number of seats: 3, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, parking heater, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, sliding door, traction control, J2A Acoustic ambient protection, H16 Heated driver's seat, W54 Rear doors, two-leaf, opening to the side wall, E07 Hill-start assist, LA2 Headlamp assistant, JA8 Crosswind assist, J65 Outside temperature display, F64 Electrically folding exterior mirrors, F68 Heated and electrically adjustable exterior mirrors, T77 Grab handle at the entrance to the cargo area sliding door on the partition, T16 Sliding door, right, SA5 Airbag, driver, E1D Digital radio (DAB), S23 Front passenger seat, single seat, S02 Driver's seat, D03 High roof, D50 Continuous partition, MK5 Speed limiter, 80 km/h, IL5 Left-hand drive, RM1 M+S tires, RS3 Steel wheels 6.5 J x 16, L65 Ceiling light(s) in the LD/FG area with door contact, LE1 Adaptive brake light, EY5 Mercedes-Benz emergency call system, IT4 3.5-ton vehicle, E6L AC charging 7.4 kW / DC charging 80 kW, Q00 Trailer load 0 kg/lbs, CE8 Higher body, W73 Step at the rear door, E1Q Selection of regeneration levels deactivated, IC1 Model series C907 / C910 Sprinter, IF0 Model series C910 VS30 FWD, RG8 Tires 225/75 R16 C, EW6 Digital extra: Remote Services Plus, B25 Electric parking brake, ME0 Electric motor 85 kW, Z4V Manufactured in Düsseldorf, Z7L Fleet cargo area package, J55 Seatbelt warning system for front passenger, J58 Seatbelt warning system for driver's seat, HH9 Semi-automatic controlled TEMPMATIC climate control system, E4T High-voltage battery (47 kWh), BH1 HOLD function, V43 Wooden floor, VA2 Interior paneling of the cargo area up to roof height (wood), ZM0 Box van, HI1 Climate zone 1 (cold/comfort), JH3 Communication module (LTE) for digital services, IK0 Complete vehicle, E8L Charging cable Mode 3 (Type 2, 3x20A) 8m, LC2 LED strip light in the cargo area, V95 Cable duct at the rear portal, V94 Cable duct on the side wall, Z2E Country version EU - EFTA - UK, Q11 Longitudinal member reinforcement, E1O MB audio system, XO9 Mercedes-Benz MobiloVan with DSB and GgD, XG7 Without uprating/downrating 3,500 kg, EY6 Breakdown management, Z3R Premium tire protection (3 years), IS3 Wheelbase 3924 mm, FR3 Rear view camera with display in the interior mirror, XU1 Signs / printed materials in German, LB1 Lateral marker lights, SK2 Driver's seat occupancy recognition, YK4 Lashing straps for lashing rails, IG4 Standard, JI6 Start-up mileage, maintenance interval 40,000 km, VF7 Fabric Maturin black, J10 Speedometer km/h, ED1 Fleece battery 12 V/70 Ah, JE1 Maintenance package Note: Hnsdpfxjzp R Eto Aitsu Despite careful checking of all our price indications, errors still occur. In some cases, these are caused by transmission errors in the systems of the various platform providers. However, errors on our part cannot be ruled out either. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. A price indication also cannot be declared as part of the contract. If you place particular emphasis on a specific feature of our advertisement, please let us know when concluding the contract. Thank you for your understanding!

Condition: used, Demonstration machine Hans Schreiner - metal lathe, 3-jaw chuck 315mm, 4-jaw faceplate 320mm, clamping disc 430mm, drive plate 250mm, steady rest, ride-on rest, magnetic brake, switchable automatically and with foot operation, coolant system, halogen lamp, splash guard, chip tray can be pulled out to the front, fixed punch, roller punch MK5 Hnjdpsvrvvaefx Aitsu removable bed, hardened and ground bed and gear wheels without oil filling incl. Multifix Set B and 3-axis digital display Technical data: Centre height 300 mm Centre width 2000 mm max. turning diameter 600 mm spindle mount Camlock 8 hollow spindle 80 mm tailstock taper MK5 spindle speed 24 to 1600 rpm Speeds 15 Main motor output 7.5 kW Max. diameter over cross slide 350 mm Max. turning diameter in the bridge 680 mm Longitudinal feed 0.07 - 4 mm/revolution Cross feed 0.02 - 1.35 mm/revolution Metric thread 0.5 - 28 mm pitch Inch thread 56 - 1 threads/inch Module thread module 0.5 - 3.5 Thread diametric pitch 56 - 8 Quill diameter/travel 65/120 mm Weight 2200 kg

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, For sale: radial drilling machine currently undergoing a complete overhaul in our facility. After completion, the machine will meet all technical standards and parameters comparable to a new machine. The machine will be fully operational and available for testing under power. ✅ 12-month full warranty covering all mechanical components and electrical system Technical specifications: Max drilling capacity steel / cast iron: 75 / 85 mm Max tapping capacity steel / cast iron: M56 / M68 Max distance spindle – table: 2000 mm Min distance spindle – table: 390 mm Spindle taper: MK5 Spindle speed range: 12.5 – 1600 rpm Spindle stroke: 350 mm Hnjdpfx Aioy D Sr Hetju Mechanical spindle feed Power supply: 400V / 3-phase Electrically raised/lowered arm Electric arm clamping Motor power: 5.5 kW Dimensions & weight: Weight: approx. 7000 kg Dimensions (L x W x H): 3275 x 1170 x 3280 mm Machine condition: Fully rebuilt and modernized Condition comparable to a new machine Available for inspection under power ✅ 12-month full warranty covering all mechanical components and electrical system Terms of sale: Location: Poland Delivery: FCA Bydgoszcz Loading included in price

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm Hjdpfeu Ng Npsx Aitsnu total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: used, centre distance 2.500 mm centre height 250 mm grinding wheel diameter 600 mm Total travel of the grinding support 320 mm spindle speeds 50 - 450 mm tool adaptor MK5 tail stock MK Hjdpex Avtcjfx Aitjnu Cylindrical Grinding Machine | NAXOS-UNION - W-500 the cylindrical grinding machine was overhauled in 2017 by KPS-Schleiftechnik (RETROFIT – see order confirmation). The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: W-500-2500 | W500 | W 500 | W 500 2500

Condition: good (used), Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Manufacturer: Kämpf, Mounting bracket type: MK5, 5 pieces -Type: A40 TGL 30-1226 2 pieces -Type: Ø 33 mm 3 pieces -Price/Fee: complete -Transport dimensions: 460/300/H63 mm Hsdpfxoucag Se Aitenu -Weight: 23.5 kg

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional cylindrical grinding machine EMAG W 11 Evolution. The conventional external-internal face cylindrical grinding machine fits perfect for single parts, prototypes and small batches. The basis of the EMAG W 11 Evolution machines is the established KARSTENS cylindrical grinder concept. Hedpfstmrlhex Aitonu No hydraulics, axis drives with servo motors and screw spindle drive, technology entry of the grinding parameters via touchscreen, automatic dressing with compensation, automatic axis release. TECHNICAL DATA Workpiece lenght: max. 1,500 mm Center height: 200 mm | Ooption 320 mm Workpiece weight: 250 kg External grinding wheel diameter: max. 500 x 80 mm Workpiece headstock: MK4 | Option MK5 / MK6 Tailstock: MK 4 Price, delivery time and equipment of the machine according to agreement.

Condition: good (used), Attachment holders, standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Mounted tool holder: 2 pieces -Recording: MK5 -Length: 495 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 495/160/H40 mm -Weight: 9.6 kg Hedpfxsucmp To Aitsnu

Condition: good (used), fixed point, fixed center point, fixed Morse taper, fixed center point, center points -Manufacturer: WMW ABW, fixed centering tip with mounting bore Hnsdsi Hmnlopfx Aitou -Recording: Morse cone MK5 -Bore: Ø 8 mm -Number: 2x centering tips available -Price: per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg/pc.

Condition: good (used), live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Bruckner, live centering tip, centering cone Hodjrlpn Ajpfx Aitenu Type: unfortunately without a type designation -Recording: MK5 -Centering tip: Ø 60 mm -Dimensions: Ø 120 x 315 mm -Weight: 9.6 kg

Condition: used, Hidromek HMK520LC-5, lightly used demo machine (169 hours) The machine is equipped with: SMP105 quick coupler Hammer-Slope-Shear hydraulics Strigin safety glass C-lubrication system D-heater Side/Rear camera Additional equipment Variable-width undercarriage (transport width 3000 mm) AdBlue system Tank pump Hnsdsz Rpznjpfx Aitsu Air conditioning Radio/AUX/USB Smartlink GT Trading is the importer of Hidromek and Airman machines in Sweden. We always have used construction machines in stock and gladly accept trade-ins. Visit us: Ullevivägen 30, Bro, Stockholm, 19740 Borrvägen 12, Nacksta, Sundsvall, 12853 Contact us for more information! Josef Said Henrik Törnblom Technical data: Year of manufacture: 2023 Operating hours: 169 h Weight: 55,000 kg Engine manufacturer: Isuzu Drive type: Diesel Location: Bro, Stockholm County, Sweden

Condition: used, RENTAL MACHINE – available for rent, not for sale. Hidromek HMK520LC-5 *For rent* Weight: 54 tons Hjdpfx Aiez Rpzustsnu The machine is equipped with: SMP105 quick coupler Hammer-Slope-Shear hydraulics Strigin safety guard C-grease lubrication system D-heater Side/rear camera Extra Adjustable undercarriage (transport width 3000 mm) AdBlue Diesel pump Air conditioning Radio/AUX/USB Contact us for more information! Tomas Eriksson Technical data: Year of manufacture: 2023 Weight: 55,000 kg Engine manufacturer: Isuzu Emission stage: Stage V Drive type: Gas Location: Bro, Stockholm County, Sweden

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 PRICE GREINER STACKING: € 6.500.- / LOT SWITZERLAND Hnjdpfxsq Nn Hcj Aiteu Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos Hedow E Nkiepfx Aitjnu -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Year of construction: 1997, condition: ready for operation (used), Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible. Hedpfxsua E Txe Aitonu

Condition: excellent (used), Year of construction: 1961, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Condition of machine bed: very good -Machine bed: hardened Hnsdpjwfpilsfx Aiteu -Manufacturer: Martin, lead screw and feed screw lathe type DLZ 502 -Turning length: 2200 mm -Turning diameter over bed: 580 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools (see photos) -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg