Used Milling Turning for sale (15,317)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 1,540 mm, turning diameter: 660 mm, Swing over crosslide: 660 mm Turning length: 1540 mm Spindle bore: 91 mm Spindle speed main/sub: 4000/5000 rpm Tool magazine: 76 positions Taper in milling spindle: Capto C6 Milling spindle speed: 12000 rpm Spindle motors: 26/22 kW Max power supply: 200V/255A Year of manufacture: 2013/9 Length: 5825 mm Width: 2850 mm Height: 2750 mm Weight: 15860 kg Full B-axis Coolant through milling spindle: 70 Bar Knoll 110/700 Part picker & outfeed belt Automatic presetter for lower turret & milling spindle Robot interface (no robot), automatic door & prepared for barfeeder Spindle 2 tailstock function Fjdpfox A E U Nox Afnepb Renishaw OMP60 probe MAPPS-IV CNC 5-axis simultaneous control 5 extra M-codes

Condition: good (used), Year of construction: 2005, turning diameter over cross slide: 430 mm, turning diameter: 600 mm, spindle bore: 65 mm, rotational speed (max.): 5,000 rpm, feed length X-axis: 270 mm, feed length Y-axis: 100 mm, feed length Z-axis: 750 mm, High-pressure pump for both tool changers. Chip flushing for main and counter spindle. The tool changer for the counter spindle is as new, replaced about 2 years ago. Fodpfx Afox A Dnhonepb

Condition: excellent (used), Year of construction: 2000, EMCO VMC 600, Siemens Year of manufacture: 2000 Fsdpfjxxakwex Afnjpb

Condition: good (used), Year of construction: 2015, operating hours: 5,381 h, functionality: fully functional, machine/vehicle number: AS0211, total height: 2,400 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, Equipment: documentation/manual, Technical specifications: - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 80 A - Control system: FANUC SERIES 31 i-MODEL A Travel ranges: - X1 / X2 axes: 180 mm each - Y1 axis: ±45 mm - Z1 axis: 704 mm - Z2 axis: 620 mm - E2 axis: 720 mm - Rapid traverse X/Y/Z axes: 30 m/min Spindle 1: - Max. speed: 5,000 rpm - Spindle nose: A6k - Spindle bore: 65 mm - Bore in clamping cylinder: 65 mm - Chuck diameter: 210 mm - Drive power: 24 kW Spindle 2: - Max. speed: 7,000 rpm - Spindle nose: Ø 110 mm - Spindle bore: 42 mm - Bore in clamping cylinder: 42 mm - Chuck diameter: 140 mm - Max. chuck jaw weight: 1.25 kg - Output power: 16.5 kW Tool carrier: - 1x 10-station tool turret Fodpfxsv Uh Ndo Afnspb - 1x 12-station tool turret - All stations driven (12 stations each) - Max. speed of driven tools: 8,000 rpm Accessories: - Chip conveyor from KNOLL - Tool holders (as shown in the photos, included)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,567 h, functionality: fully functional, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 678 mm, bar passage: 70 mm, controller model: Fanuc 310i, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X1 travel: 165 mm Y1 travel: 80 mm (+50/-30 mm) Z1 travel: 678 mm X2 travel: 165 mm Z2 travel: 640 mm Main spindle Max. speed: 5,000 rpm Max. bar capacity: 70 mm Draw tube bore: 75 mm Torque: 191 Nm Power: 20 kW Sub-spindle Max. speed: 5,000 rpm Draw tube bore: 42 mm Torque: 108 Nm Power: 17 kW Turret 1 & 2 Tool stations per turret: 12 live Live tools: 4,000 rpm MACHINE DETAILS Control: Fanuc 310i Number of controlled axes: 8 Dimensions & Weight Machine dimensions: 4,400 mm x 2,000 mm x 2,300 mm Machine weight: 8.8 t Fpodpfx Afox Af Dkjnsb Chip conveyor weight: 750 kg Operating Hours Automatic mode: 23,567 h Power-on hours: 51,273 h EQUIPMENT Chip conveyor 2 x collet chucks Parts conveyor Extraction unit Bar feeder FMB Turbo 8-80 / 3200

Condition: new, Year of construction: 2025, functionality: fully functional, Traub TFT Monitor/Screen TX8D, TX8F, TX8H Replacement Monitor Replacement Screen Type: TFT (1) Item No.: 222549 (2) Item No.: 10892558 Condition: new Traub TFT monitor/screen TX8D, TX8F, TX8H Includes frame and cable, 1:1 interchangeable, 12" Plug and Play solution Not an original Traub spare part – 100% tested and compatible Manufactured by cnc-markt GmbH Fpsdpfxex Adb Ie Afneb

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: ML0107-000373, Doosan PUMA 2600 L Swing 780mm Fsdpexw Ilmefx Afnspb X-Axis 260 mm Z-Axis 1350 mm FANUC i Series Swarf conveyour Renishaw Toolsetter

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Working Area Fodpjxz E Uyjfx Afnepb Max swing diameter over bed: 500 mm Swing diameter over cross slide X: 375 mm Max turning diameter: 246 mm Max turning length: 445 mm Chuck diameter: 210 mm Bar capacity: 65 mm Cross travel (X): 213 mm Longitudinal travel (Z): 450 mm Feeds Rapid traverse X/Z: 24 / 30 m/min Main Spindle Spindle nose (flat flange): 140 h5 mm Front bearing inner diameter: 100 mm Spindle motor power (40/100% ED): 16 / 12 kW Torque (40/100% ED): 153 / 115 Nm Spindle speed: 25–6000 rpm Tool Turret Number of tool stations: 12 Motorized stations: 12 Shank diameter (DIN 69880): 30 mm Motor power (40% ED): 9 kW Max torque (40% ED): 20 Nm Max speed: 4500 rpm Tailstock Automatic tailstock travel: 450 mm Center taper: MT 4 Max tailstock thrust: 400 daN Year of construction: 2008 Machine equipment: • Chip conveyor • Preparation for fume extractor • Various fixed and driven tool holders • Instruction manuals

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 300 mm, TECHNICAL DETAILS Turning length: 300 mm Distance between centers: 800 mm MACHINE DETAILS Control: FANUC 16T Fpodjxz Apbepfx Afnjb EQUIPMENT 3 turrets Sub-spindle

Condition: excellent (used), Machine in very good condition. It has worked to the end, now it is on warehouse not connected to power. Machine in 100% completed Hu3Nhjg Parts conveyor, chips conveyor, bar feeder available. Spindels bore 42 mm IRCO feeder bar All manuals and documentation available Fpjdjvllbropfx Afneb

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, turning length: 800 mm, turning diameter over cross slide: 500 mm, turning diameter: 400 mm, rotational speed (max.): 4,000 rpm, INDEX GU800 CNC Lathe with C-Axis, Driven Tools & Chip Conveyor Description: For sale is an INDEX GU800 CNC turning/milling machine with extensive equipment. The machine is in full working order, runs smoothly, and shows no errors. Equipment & Details: - Siemens Sinumerik control with color display - Turning spindle with C-axis for milling operations - Turret with 16 tool positions, including driven tools - Tailstock available - 2-speed spindle gearbox (manual belt change) - Tool holder VDI40 - Forkardt 250 mm chuck - Maximum swing diameter: 500 mm - Maximum turning length: 1000 mm - Spindle bore: 65 mm Fpedoxzqccjpfx Afneb - LED interior lighting - Chip conveyor included - Documentation & programming manual available Condition: ✔️ Fully operational ✔️ Ready for immediate use Inspection & Collection: By appointment – the machine is currently connected and can be demonstrated in operation. Location: Wathlingen / Celle (Lower Saxony, Germany) ENQUIRIES BY EMAIL ONLY!!!

Condition: used, Year of construction: 2008, turning diameter 310 mm turning length 600 mm control Sinumerik 810 D PL Siemens turning diameter over bed 425 mm turning speed range - main spindle 500 - 4.500 min/-1 max. Torque 280 Nm power capacity - main spindel 16,5 kW Spindle diameter 100 mm C-Axis 360 ° chucking diameter 210-52 mm spindle bearing diameter 120 mm clamping cylinder 65 mm Bar feed max. 65 / (52) mm spindle nose A8 DIN 55026 x-axis 230 mm z-axis 740 mm rapid traverse X-axis 15 m/min rapid traverse Z-axis 24 m/min tool positions turret 12 pos. driven statition 12 pos. tool taper VDI 30 DIN 69880 Spindle speed driven tools 6.000 min -1 power capacity - driven tools 3,7 kW max. Torque 9,5 Nm dia. of quill MK 4 80 mm quill stroke 120 mm Fpedpetqmqhsfx Afnjb tailstock adjustment 475 mm tension force 500 daN weight of the machine ca. 4,2 t dimensions of the machine ca. 3,7 x 2,2 x 1,8 m CNC - Turning- and Milling Center SPINNER - TC 65 MC - Turret completely overhauld

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 480 mm, controller manufacturer: SIEMENS, controller model: 840D SL, rotational speed (max.): 20,000 rpm, Equipment: chip conveyor, 6-axis milling and turning centers from the renowned brand CB FERRARI, CTS model, spindle cooling and chip extractor. Machines for the precision molding, aerospace, medical, watchmaking, turbine blades, household appliances, automobile, precision mechanics and energy industries. Siemens and Heidenhain drives. Machines in excellent working order - Installation and start-up on a budget Fpodpfoh Elngjx Afnsb

Condition: like new (used), Year of construction: 2005, functionality: fully functional, turning length: 450 mm, spindle speed (min.): 25 rpm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 65 mm, Siemens 840 D CNC Working area Max. swing diameter on bed 505 mm Swing diameter on X-slide 375 mm Chuck diameter 210 mm Bar capacity 65 mm Transverse travel (X) 213 mm Longitudinal travel (Z) 450 mm Feed rates X/Z-axis rapid traverse 24/30 m/min Main spindle Fpodpew Adhwjfx Afnob Spindle nose (flat flange) 140 h 5 mm Internal diameter of front bearing 100 mm Spindle motor power (40/100% DC) 16/12 kW Torque (40/100% DC) 153/115 Nm Spindle speed 25 - 6.000 rpm Tool turret Number of tool stations 12 Of which motorized 12 Shank diameter (according to DIN 69880) 30 mm Motor power (40% DC) 9 kW Maximum torque (40% DC) 20 Nm Maximum speed 4.500 min-1 Tailstock Tailstock stroke, automatic 450 mm Center point attachment 4 CM Tailstock thrust, max 400 daN Machine equipment: • Chip conveyor • Provision for fume extractor • 2 axial motorized modules • 4 radial motorized modules • Fixed tool holders

Condition: good (used), Year of construction: 2021, MAZAK Integrex i-250H ST SmoothAi, year of manufacture 2021, HALTER loading portal with robot, bar feeder BREUNING-IRCO ILS-MUK, main spindle 8" Fpsdjxy T Dtjpfx Afneb sub spindle 8", machining diameter 670 mm Bar diameter 65 mm Spindle speed: Turning: 5,000 rpm Milling: 12,000 rpm Chain magazine: 38 positions, Turret: 12 positions

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 500522, spindle speed (max.): 3,500 rpm, overall weight: 6,500 kg, spindle diameter: 140 mm, counter spindle speed (max.): 3,500 rpm, TECHNICAL DETAILS Control: Siemens Sinumerik / Index C200-4D Main Spindle Spindle bore with collet clamping: 90 mm Spindle diameter at front bearing: 140 mm Spindle nose ISO 702/1 (Size): 8 Chuck diameter: 250/315 mm Fpedpfxexvq Rpj Afneb Max. rated turning diameter: 270 mm Max. swing diameter: 590 mm Speed: max. 3,500 rpm Counter Spindle Spindle bore with collet clamping: 90 mm Spindle diameter at front bearing: 140 mm Spindle nose ISO 702/1 (Size): 8 Chuck diameter: 250/315 mm Speed: max. 3,500 rpm Min. distance collet: 20 mm Rapid traverse: 22.5 m/min Turret Number of tools: 12 MACHINE DETAILS Dimensions & Weight Footprint: approx. 8/10.5 m² Height: 2,150 mm Machine weight approx.: 6.5 t EQUIPMENT Tailstock Automatic loading and unloading system

Condition: excellent (used), Year of construction: 1998, turning diameter over cross slide: 600 mm, For sale: CNC Lathe GILDEMEISTER CTX600E V3 with live tooling. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX600E V3 Fpodpfxoxy Tfde Afneb Control system: Heidenhain 3190 Country of origin: Germany Year of manufacture: 1998 Machine specifications: - Turret: 12 stations for VDI-50 tool holders (6 driven stations) - Max spindle speed: 3,600 rpm - C-axis - Live tooling - Hydraulic tailstock - Tool measurement probe - Max turning diameter X-axis = 600 mm - Max turning length Z-axis = 1,000 mm - Coolant system - 400 mm three-jaw hydraulic chuck - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 9 tons - Loading onto truck included in the price The machine has undergone a full inspection. 100% operational. Connected and ready for work. Stal-Com has been engaged in the sale, service, and training on CNC machines from the DMG group for 19 years. We specialize in all Gildemeister lathe models and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers from Poland, but also from across Europe and parts of Asia. Each machine can be inspected under production conditions, as we also perform subcontract machining. After purchase, we provide operator training and can assist with setting up part production at the customer’s site. We maintain long-term partnerships with many companies, supplying additional machine tools as needed.

Condition: excellent (used), With C-axis With driven tools Fpodpfxoq Dlt So Afnsb FANUC TXP-200 FA control Turning diameter max 360 mm Turning length -683 mm Swing Diameter -450 mm Spindle speeds -3'000 rpm Top turret tool holders 12 driven positions Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2019, Machine has 1500 spindle hours DMG Mori CLX 350 V 4, year of manufacture 2019, control DMG Mori Slim Line / Siemens Shoptrun, travel X/Z 185/540 mm, Y-axis travel 80 mm, 12-position turret, live tooling, C axis, Tooleye tool measurement, three-jaw chuck KNCS 225/66, collet chuck, VDI 30 tool holder, high-pressure cooling 12 bar, tailstock, Fpsdpfx Afjxy Hyzonsb chip conveyor, prepared for bar feeder,

Condition: used, DOOSAN S390L CNC LATHE Fsdpfx Afjxfa Ipjnjpb MAKE DOOSAN, MADE IN KOREA MODEL S 390L, YEAR 2000 CONTROL FANUC 21T SWING OVER BED 580 mm MAX TURNING DIA 390 mm DISTANCE BETWEEN CENTRES 800 mm CHUCK DIA 300 mm SPINDLE BORE 89 mm SPINDLE NOSE A1-8 SPINDLE SPEED 3500 RPM SPINDLE MOTOR 30 HP TURRET 12 STATIONS, RAPIDS X: 24m/min Z: 30m/min TAILSTOCK YES MACHINE DIMS L: 2800 mm W: 1880 mm H: 1800 mm MACHINE WEIGHT 5000 KGS PLUS TOOL SETTING PROBE COOLANT SYSTEM TURRET TOOLING

Year of construction: 2008, condition: ready for operation (used), A defective CNC turning and milling machine Index with main and counter spindles is available. Travel path X/Y/Z: 630mm/210mm/2000mm, turning diameter: 630mm, turning length: 2000mm, speed: 3000U/min/6000U/min, max. workpiece weight: 300kg, chuck diameter: 315mm/400mm, tool holder: HSK-63A, tool stations: 2x32. Machine dimensions X/Y/Z: approx. 6500mm/3200mm/2800mm, weight: approx. 23000kg, control: Index C200-4D (Siemens Sinumerik 840D). The ball screw of the machine is defective. Dokumentation vorhanden. An on-site inspection is possible. Fpjdpfx Afoxyzgcsnob

Condition: excellent (used), Year of construction: 2005, operating hours: 4,900 h, functionality: fully functional, turning length: 730 mm, turning diameter: 545 mm, spindle motor power: 11,000 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, rotational speed (max.): 12,000 rpm, type of input current: three-phase, feed length X-axis: 410 mm, feed length Y-axis: 140 mm, feed length Z-axis: 570 mm, total height: 3,100 mm, total length: 5,180 mm, total width: 2,550 mm, spindle nose: A6, overall weight: 9,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, 2005 Mazak Integrex 100-III S CNC Mill-Turn Lathe – Fully Equipped with Automation – Low Hours🔹 Make: Mazak Model: Integrex 100-III S Machine Type: CNC Mill-Turn Lathe with Automation Fpsdpfx Afjxyy Ixjnsb Year: 2005 Control: Mazatrol 640MT Pro Production Hours: 4869hrs Condition: Very Good We are pleased to offer this 2005 Mazak Integrex 100-III S, a high-precision CNC mill-turn center built for multi-tasking performance. Fitted with the powerful Mazatrol 640MT Pro control and only 4869 production hours, this machine delivers versatility, speed, and accuracy with minimal wear. Ideal for complex part machining, this machine features main and sub spindles, B-axis milling head, and a GL50F gantry loader for automated part handling, increasing your throughput without sacrificing precision. 🔧 Key Specifications: Max Turning Diameter: 545mm Max Machining Diameter: 350mm Max Turning Length: 730mm Bar Capacity: 52mm Main & Sub Spindle Power: 11kW each Main/Sub Spindle Speed: 6000rpm C-Axis Resolution: 0.001° indexing Milling Spindle: 5.5kW / 12000rpm B Axis Range: 225° Tool Changer: 40 ATC stations Tool Capacity: 4kg, 200mm length, 90mm diameter Control: Mazatrol 640MT Pro Tool Taper: KM63 🧰 Machine Travels: X1: 410 mm | Y1: 140 mm | Z1: 570 mm X2: 220 mm | Z2: 780 mm W-Axis: 790 mm ⚙️ Included Equipment: GL50F Gantry Loader with infeed/outfeed conveyors Automatic door for improved workflow Selection of tool holders FSE Swarf Conveyor OMF 1000 Filter System FSE Coolant Filtration & Sump Pump Chiller unit for thermal stability 📐 Footprint & Weight: Dimensions (excluding gantry): 2600 x 2200 x 2500mm Weight: 7,600kg 🚀 Why Choose This Mazak Integrex 100-III S? Low hours – only 4869 hours of production Fully automated with gantry loader Clean, well-maintained, and in very good condition High-end specs for multi-process machining Ready to go – excellent choice for job shops or high-mix/low-volume manufacturers *Specifications are given in good faith but not guaranteed* Mazak Integrex 100-III S for sale Used Mazak CNC lathe CNC mill-turn lathe with gantry loader Mazak Integrex Irish dealer Mazak 100-III S specifications CNC turning center with automation Used CNC lathe 2005 Mazak Mazatrol 640MT Pro machine CNC lathe with sub spindle Mill-turn lathe with B-axis

Condition: used, HANEX 17D SWISS TYPE LATHE MAKE HANEX, MADE IN KOREA MODEL 17 D YEAR 1997 CONTROL FANUC OT-CD MAX MACHINING LENGTH 210.0 mm MAX MACHINING DIA 17.0 mm MAX DRILLING DIA 7.0 mm SPINDLE RANGE 200 – 8,000 rpm SPINDLE MOTOR 1.1/3.7 kW SUB-SPINDLE 200 - 4000 rpm TOOL CAPACITY FOR OD MACHINING 8 TOOLS FOR ID MACHINING 3 TOOLS FOR BACK-END MACHINING 2 TOOLS SLIDE TRAVEL X AXIS: 32.0 mm Z AXIS: 210.0 mm T1, T2=105.0 mm B AXIS: 113.0 mm Fsdewidy Tspfx Afnopb MACHINE DIMS 1500 x 980 x 1500 mm MACHINE WEIGHT 1050 KGS PLUS 3000.0 mm FULL LENGTH MAGAZINE BARFEED RANGE OF TOOL HOLDERS RANGE OF COLLETS SET OF MANUALS

Condition: used, Year of construction: 1997, MORI SEIKI SL-35 TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-35 YEAR 1997 CONTROL FANUC MSC 516 CHUCK DIA 400.0 mm MAX. TURNING DIA 400.0 mm MAX. TURNING LENGT 780.0 mm SWING OVER BED 600.0 mm OVER CROSS SLIDE 425.0 mm MAX. SPINDLE SPEED 9-2500 rpm TURRET 12 STATIONS TAILSTOCK YES SPINDLE BORE 82.0 mm SPINDLE NOSE A8 RAPID TRAVERSE RATE X: 12,000mm/min & / Z: 15,000mm/min PLUS Fpjdsv N D Rtspfx Afnsb SWARF CONVEYOR TOOL SETTING PROBE GOOD RANGE OF TOOLING MACHINE MANUALS CLEAN

Condition: used, MAZAK A12 MEGA TURN CNC ELEVATING RAIL VERTICAL BORER MAKE MAZAK, MADE IN JAPAN MODEL A12 MEGA TURN YEAR LATE 1980 s CONTROL FANUC 6 TB TABLE DIA 1250.0 mm MAX SWING 1450.0 mm MAX CUTTING HEIGHT 1150.0 mm TABLE SPEED 1 - 350 RPM ATC 16 STATIONS PLUS 4 TABLE JAWS TOOL HOLDERS SWARF CONVEYOR Fpsdpfx Afov N Ek Usneb COOLANT SYSTEM GUARDING