Used Milling Turning for sale (15,502)

Condition: good (used), Year of construction: 2020, operating hours: 12,500 h, functionality: fully functional, turning length: 1,530 mm, turning diameter: 670 mm, spindle bore: 91 mm, travel distance Y-axis: 300 mm, rotational speed (min.): 4,000 rpm, Equipment: rotational speed infinitely variable, DMG NTX2500 / 1500mm 2nd Generation Spindle Standard Spindle 1 turnMASTER FANUC specification. Power output: 18.5 / 18.5 / 15 (25%ED / 50%ED / continuous) kW Maximum spindle speed: 4,000 rpm Maximum torque: 599 / 505 / 409 (25%ED / 50%ED / continuous) Nm Spindle through-hole diameter: ø91 mm Kjdpfxjxp H Rro Adqjnd Bar capacity: ø80 mm Standard Spindle 2 turnMASTER FANUC specification. Power output: 18.5 / 18.5 / 15 (25%ED / 50%ED / continuous) kW Maximum spindle speed: 4,000 rpm Maximum torque: 599 / 505 / 409 (25%ED / 50%ED / continuous) Nm Spindle through-hole diameter: ø91 mm Bar capacity: ø80 mm Control Control F31iB5 with CELOS CELOS - ERGOline Touch panel Chuck for Main Spindle KITAGAWA 12-inch Hollow Power Chuck B-212A821H Chuck for Counter Spindle (Spindle 2) KITAGAWA 10-inch Hollow Chuck BB210A821 Tool Spindle Standard tool spindle, 12,000 rpm, 23/22.2 kW (FANUC) Capto C6 Standard full indexing specifications Maximum torque: 116/89 (40%ED/continuous) Nm Tool Magazine Tool storage capacity: 76 tools (Capto C6) Coolant Supply Knoll KF1100/700 compact filter system 7.0 MPa Special Configuration Through-tool spindle air blow (Lubricator added, spindle can rotate, switching between coolant and air) Long tool stocker (3 tools, ø63mm×L600mm, C6, 8 kg each, above sub spindle/tailstock) • Tool magazine capacity: 3 tools • Max. tool diameter: ø63 mm • Max. tool length: L600 mm • Max. tool weight: 8 kg • Max. tool moment: 7.84 Nm (from gauge line) Automatic door Highlights - Simultaneous 5-axis machining with Direct Drive Motor (DDM) on the B-axis. - The compactMASTER, the world’s shortest tool spindle in its class (350 mm), offers a large working envelope for higher productivity. - Wide machining area with X-axis travel of 675 mm (-125 ~ +550 mm) and Y-axis travel of 300 mm (±150 mm) - Y-axis travel of ±40 mm on Turret 2 extends machining range - Minimal footprint of 16.5 m² (5,825 × 2,830 mm) in its class for workpieces up to ø670 × 1,530 mm - 6-sided machining with Spindle 2 enables complete component machining in a single setup

Condition: new, Year of construction: 2025, Z-MaT DT500E-S, Siemens 828 D ShopTurn 15" Touch CNC Turning Center, with Sub-Spindle, Driven Tools, and True Y-Axis, 35° Slant Bed Max. Swing Diameter: 650 mm Max. Turning Diameter: 320 mm Max. Turning Length: 550 mm Linear Roller Guides on All Axes Rapid Traverse X/Z/Y: 20/20/12 m/min Y-Axis Travel: 140 mm, +/- 70 mm Turret: 12 Stations BMT55 — 12 Driven Positions Max. Turret Speed: 4000 rpm, 3 kW Main Spindle: Chuck Diameter: 254 mm Spindle Nose: A2-8 Max. Bar Capacity: 75 mm Spindle Bore Diameter: 86 mm Spindle Drive Power, Direct Drive: 15/16 kW Max. Spindle Speed: 3500 rpm Sub-Spindle: Chuck Diameter: 152 mm Spindle Nose Standard: A2-5 Max. Bar Capacity: 46 mm Drive Power: 11 kW Ksdpewwvldjfx Adqond Max. Speed: 3000 rpm Dimensions (W x D x H): 3.1 x 2.0 x 2.25 m Weight: 5.3 t Standard Equipment: Parts Catcher (Preparation) Hinged Belt Chip Conveyor Oil Skimmer Coolant System 3-Color Warning Light Work Area Lighting Centralized Lubrication System Programmable Tailstock Set of Soft Jaws Tools and Toolbox CE Conformity Operating Manual The machine will be exhibited at EMO, Hall 12/D10 and will be available immediately afterwards. A wide range of automation options is available, such as bar loaders and loading robots.

Condition: used, MAZAK Integrex 100 III ST CNC: MAZATROL 640 MT PRO Swing over Cross Slide: 545 mm Maximum Machining Diameter (Milling Head): 545 mm Maximum Machining Diameter (Lower Turret): 400 mm Maximum Machining Length: 753 mm X-Axis Travel: 410 mm Z-Axis Travel: 805 mm Y-Axis Travel: 140 mm X2-Axis Travel: 220 mm Z2-Axis Travel: 780 mm W-Axis Travel: 795 mm Rapid Traverse (X/Z-Axis): 30/33 m/min Rapid Traverse (X2/Z2-Axis): 30/33 m/min Rapid Traverse (Y-Axis): 26 m/min Rapid Traverse (W-Axis): 30 m/min Main Spindle Bore Diameter: 51 mm Sub Spindle Bore Diameter: 51 mm Main Spindle Speed Range: 35 – 6,000 rpm Kedpfxexl Eq Ae Adqsnd Sub Spindle Speed Range: 35 – 6,000 rpm Main Spindle Motor Power: 11 kW Sub Spindle Motor Power: 11 kW Main Spindle Maximum Torque: 16.4 kgf·m Sub Spindle Maximum Torque: 16.4 kgf·m Tool Magazine: 40 tools, KM63 Milling Spindle Speed: 15–12,000 rpm Lower Turret Stations: 8 C-Axis on Main Spindle C-Axis on Sub Spindle C-Axis Indexing: 0.001 degrees Driven Tools Main Spindle Chuck: KITAGAWA B-206, Ø170 mm Sub Spindle Chuck: KITAGAWA B-206, Ø170 mm Tool Presetter Chip Conveyor Machine Weight: 7,600 kg

Condition: excellent (used), SPECIFICATIONS Ksdpfx Aowbnqtsdqend Swing over bed 528 Swing 370 Distance between centres 810 X Axis 290 Z Axis 650 Control Fanuc O-T Tool changer 1 2 Tail stock Yes Dodswbf Dkomblxx Isur Chip conveyor yes DIMENSIONS Length 3600 mm Width 1950 mm Height 1820 mm

Condition: used, Year of construction: 2002, Technical details: turning diameter: 370 mm turning length: 200 mm Spindle 1 RPM: 4000 1/min control: Siemens 840 D Spindle 2 RPM: 4000 1/min power capacity: L / R 18/24 kW max. torque on the spindle: 630 nM C-Axis: 0,001° Turret No.1 stations / rotary tools: 12/12 VDI 40 Turret No.2 stations / rotary tools: 12/12 VDI 40 turning speed range - milling: 3000 1/min power capacity - milling spindle: 8,8 kW torque rotary tools: 28 Nm Bar capacity spindle 1: 85 mm total power requirement: 65 kVA weight of the machine ca.: 13 t dimensions of the machine ca.: 5,7x2,4x2,1 m Travel x1: 260 mm Travel x2: 260 mm Travel Y1: 600 mm Travel y2: 600 mm Accerories Chip conveyor ls Parts and total counter Automatic separation wall Standard set of tool holders Power Chuck 2 x 250 mm manual tool eye l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools. Kjdpfx Aexlrkcsdqjnd *

Condition: good (used), Year of construction: 2004, operating hours: 19,400 h, functionality: fully functional, turning length: 750 mm, turning diameter over cross slide: 250 mm, turning diameter: 190 mm, spindle bore: 49 mm, travel distance X-axis: 270 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 880 mm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 24 m/min, milling spindle length: 60 mm, rotational speed (max.): 6,000 rpm, Equipment: bar feeder, chip conveyor, Multi Axis Mori Seiki ZT-1000Y Year 2004 8-axis turning milling machine With LNS bar feeder Many tool-holders and live-tools included Max. workpiece turning diameter: 250 mm Max. distance between spindles: 750 mm Max. turning diameter: 190 mm Max. turning length: 190 mm Standard bar diameter: 170 mm Knedjw H Dnfjpfx Adqed Max. bar capacity: 120 mm X-axis travel: ±135 mm Z-axis travel: ±440 mm Y-axis travel: ±40 mm B-axis (spindle 2) travel: 510 mm Spindle speed range: 60–6000 rpm Spindle bore: 49 mm Spindle nose diameter: 80 mm Min. spindle indexing angle: 0.001° Turret type: 12 stations Tool shank diameter: 20 mm Max. live tool speed: 6000 rpm Live tool machining capacity: Ø13 mm drill / M12 tap Live tool motor power: 3.7 / 2.2 kW Rapid traverse speed: X1/X2: 18000 mm/min, Z1/Z2: 24000 mm/min, Y: 6000 mm/min Main spindle motor power: 7.5 / 5.5 kW Machine dimensions (L×W×H): 2797 × 2010 × 1995 mm Machine weight: 5000 kg Power requirement: 46 kVA

Condition: used, Year of construction: 2005, Lot consists of: (1) Tire Testing Machine Knjdpfxjxf Avie Adqed Technical details: Test wheel: 67", max. speed: 320 km/h, max. load: 2,500 kg, camber angle: 0–5° (2005)

Condition: used, Year of construction: 1999, max. bar material dia. 42 mm max. turning diameter 180 mm turning length 350 mm control FANUC 18i Main-/Counter -spindle turning speeds 6.000 U/min Ksdsxlugmjpfx Adqjnd number of tapers in turret head 2 x 12 tool taper VDI 25 travel -x axis 170 mm travel -z axis 350 mm CNC Turning- and Milling Center | SCHAUBLIN - 42S TM-6 with main and sub-spindle, 2x turrets aligned for driven tools and equipped with a bar feeder. The machine has 7.856h running hours. The machine is in good condition and can be inspected under power. For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 42STM-6 | 42STM | 42STM6 | 42 S TM-6

Condition: excellent (used), With C-axis With Y-axis With driven tools SIEMENS 840D SL ShopTurn control Turning diameter max 700 mm Turning length -3065 mm Swing Diameter -900 mm Spindle speeds -2'500 rpm C-axis Dividing 0.001° Knedew S Iq Hopfx Adqed Bar diameter 105mm Top turret tool holders 12 driven positions Y-axis travel 160 mm Tool breakage control system Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1990, Used 20 mm Cold Forming Machine Kodsxlac Hepfx Adqond Manufacturer: Asahi-Okuma (Japan) Year of manufacture: 1990 Model: AF-2020-5 Station No.: 5 Cutting diameter: Max. 20 mm (tensile strength below 70 kg/mm²) Cutting length: 210-15 mm Projection length: Punch side projection: Max. 52 mm Main die x depth: 115 mm diameter x 250 mm Punch die x depth: 85 mm diameter x 150 mm Cutting die x depth: 80 mm diameter x 80 mm Ejector die diameter: 30 mm diameter Cutting die diameter x thickness: 80 mm x 40 mm Die center distance: 140 mm Crank stroke: 380 mm Transfer stage length: 210 mm Head piece net diameter: 45 mm diameter. Punch net diameter: 100 mm diameter. Force: 250 tons Production capacity: 100 units/min (max.) Main motor: 75 kW (6/8/12 poles) Machine weight: 75 tons Machine dimensions: 9.1 x 3.45 m

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Knsdswbuyzopfx Adqsd

Condition: used, Year of construction: 2008, turning diameter 250 mm Ksdpfexiy Dfjx Adqjnd turning length 1185 mm control Siemens 840 D total power requirement 21 / 28 kW

Condition: good (used), Year of construction: 2008, turning length: 1,500 mm, turning diameter: 420 mm, Manufacturer: MAZAK Type: QTN 350 II MY Control: Mazatrol Matrix Nexus Year of Manufacture: 2008 Specifications Metric US Standard Ksdpfx Adjwaikxeqjnd Max. Turning Diameter 420 mm X-Axis 257 mm Y-Axis 152 mm Z-Axis 1607 mm Spindle Bore 102 mm Speed 3300 rpm Spindle Power 30 kW Tool Changer 12-Speed Driven Tool Power 4000 rpm Driven Tool Power 7.5 kW Quill Mount 5 Mk Quill Stroke 200 mm Dimensions (Estimate) Length 5000 mm Width 2100 mm Height 2200 mm Weight 8600 kg Please note: The information on this page has been compiled to the best of our knowledge and belief, and where possible, by the manufacturer. This information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you review all important details.

Condition: new, Year of construction: 2022, operating hours: 173 h, functionality: fully functional, machine/vehicle number: TJPM1003, turning length: 640 mm, turning diameter over cross slide: 215 mm, turning diameter: 215 mm, spindle motor power: 15,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 51 mm, travel distance X-axis: 190 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 12 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, bar diameter (max.): 51 mm, Equipment: documentation/manual, rotational speed infinitely variable, Japanese Takisawa TM-2000 Y2 turning center with two turret, and Y axis (both), sub spindle and Fanuc 0iTF Plus controller. Demo machine with 173 h running time. Options: Kitagawa BB206 3 jaw chuck for main spindle Kitagawa B206 3 jaw chuck for sub spindle SMW (Mario Pinto) PPBE-42 collet chuck for main spindle SMW (Mario Pinto) collet chuck for sub spindle Raku-Raku monitor controller option Abnormal load detection function Knjdpfx Asxn Sapjdqed 9 bar high pressure coolant Bar feeder interface Remaining bar discharge device Tool setter (manual) Workpiece unloader with conveyor Chip conveyor Static toolholders 2 pcs axial rotary toolholder

Condition: excellent (used), Sub-spindle, C-axis FANUC 18i-TB control Turning diameter max 300mm Kodpfx Ajwufdqedqond Turning length -366mm Spindle speeds main spindle 30-5000 rpm Spindle speeds sub spindle 30-6000 Turret head: 12 driven positions C-axis Dividing 0.001 degrees Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW max. torque on the spindle 410 Nm no. of tools in turret 1 12 BMT 65 Kodpfx Adoww Nazoqjnd driven stations 12 BMT 65 speed of driven tools 5000 U/min drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure

Condition: good (used), Year of construction: 2008, Parts shown by hand not come. Kodpfx Ajxhg Eysdqjnd

Condition: used, Year of construction: 2003, turning diameter 190 mm Knedpjxiy Aujfx Adqod turning length 620 mm control Fanuc Series 18i-TB total power requirement 15 kW weight of the machine ca. 13,5 t dimensions of the machine ca. 5350X3350x2395 m

Condition: excellent (used), Machine in very good condition. It has worked to the end, now it is on warehouse not connected to power. Machine in 100% completed Hu3Nhjg Kodpfxevllbrj Adqond Parts conveyor, chips conveyor, bar feeder available. Spindels bore 42 mm IRCO feeder bar All manuals and documentation available

Condition: used, _____ Description: Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mm Turning length : 1000 mm Main spindle: Technology:Motor spindle Speed:4,200 rpm Power:22 kW Torque:427 Nm spindle bore:91 mm Hollow clamping cylinder:86 mm C-axis:High precision package Chuck:SMW KNCS-N 275-86 K8 Kodpfswu I Irjx Adqond Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:22 kW Torque:420 Nm spindle bore:80 mm Hollow clamping cylinder:77 mm C-axis:High precision package Chuck:SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Technology:Milling spindle Speed:12.000 rpm Power:22 kW Torque:120 Nm Tool holder:HSK 63 Y-axis:250 mm (+/- 125 mm) B-axis:240° Tool magazin: Number of stations:80 Equipment: Measuring systems:Direct in X/Y/Z axis (glass scales) Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Deltatherm E4 Chip rinsing:working area, manual gun Accuracy package:C-axis high accuracy Software package:5-axis auto-tuning Software option:Multifunction tool Gear cutting software package:Gear hobbing, gear peeling Control extension:Dialogue programming Workpiece measurement:Renishaw measuring probe Tool measurement:Tool setter Tool breakage monitoring:Renishaw TRS2 B-axis:NC function and turning function Bar loader:LNS Quickload Servo III+ Automation preparation:Robot interface Work area door:Automatic Set-up mode:Electronic handwheel

Year of construction: 2003, condition: good (used), Sub-spindle, Y-axis, B-axis SIEMENS 840D Powerline Turning diameter max 200mm Turning length -635mm Swing Diameter -250mm Spindle speeds main & sub-spindle 20-7000 rpm Turret head 1+2: 12 driven positions B-Axis, upper turret head +135/-45° Misc. accessories Knodpfx Aeglf A Hsdqed MARCELS MASCHINEN CH

Condition: used, Year of construction: 2009, turning diameter 410 mm turning length 800 mm greates pass round over bed 700 mm Kodpfxeurngge Adqsnd control Heidenhain TurnPlus IT CNC Pilot spindle passage Ø 65 Teilhohlspannung mm spindle speed: 25- 5000 U/min spindle motor 25 kW max. torque on the spindle 280 Nm no. of tools in turret 1 12 VDI 40 driven stations 12 VDI 40 speed of driven tools 4000 U/min drive milling spindle 5,6/ 11,3 kW y-axis +/- 60 mm sup spindle 15 kW Spindlespeed subspindle 20- 6000 U/min rapid traverse 30/22,5/30 m/min tail stock Gegenspindle/Subspindle range L-W-H 4,7 x 2,7 x 2,0 mm weight of the machine ca. 6,5 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck SMW 315 BH main spindle - 3 jaw chuck SMW 250 BH sub spindle - chipconveyor - oil mist collector LTA - automatic door - coolant pistol - partly hollow spindle Ø 65 x 840 mm

Condition: excellent (used), Year of construction: 2018, Sub-spindle, Y-axis, C-axis FANUC 31i B-NT-SmartX control Turning diameter max 225 mm Turning length -656 mm Chuck Diameter -210 mm Main-spindle speeds 4'500 rpm Sub-spindle speeds 6'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Kedpfovwkirjx Adqjnd Robot for workpiece loading Tool presetting device Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2006, turning diameter 325/220 mm turning length 532 mm turning diameter over slide 220 mm control Fanuc 0 spindle passage 65 mm spindle nose A2-6 Knsdpfxov D Rgde Adqsd number of spindle speeds 3500 U/min spindle motor 18,5 kW Number of tools 12 BMT driven stations 12 BMT speed of driven tools 5000 U/min power of driven tools 3,7 kw rapid traverse 30 m/min tail stock MK 4 Ø 80 x 100 mm range L-W-H 6,1 x 1,7 x 1,72 m weight of the machine ca. 5,4 t CNC- lathe with driven tools, bar feed magazin and box way system - short barfeed magazin - parts cacher - tool measuring - 3 jaw chuck Ø 250 - chip conveyor - oil dust collector - tailstock - 1 + 1 driven toolholder - some fixed toolholders

Condition: used, Year of construction: 2019, turning diameter 230/300 mm turning length 452 mm greates pass round over bed 700 mm control Siemens 828 D Shop turn spindle passage 65 mm spindle speed: 4500 U/min spindle motor 15/11 kW max. torque on the spindle 179 Nm no. of tools in turret 1 12 BMT 55 driven stations 12 BMT 55 speed of driven tools 5000 U/min drive milling spindle 5,6/3,7 kW y-axis +/- 60 mm sup spindle 7,4/4,9 kW Spindlespeed subspindle 6000 U/min rapid traverse 36/36/10 m/min tail stock Gegenspindle/Subspindle range L-W-H 3,9 x 1,65 x 2,0 mm weight of the machine ca. 4,7 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Ø 210 mm main spindle - 3 jaw chuck Ø 135 mm sub spindle - chipconveyor - parts catcher with box in door - Tool measurung Knodjww Nanopfx Adqsd - 2 + 2 driven toolholder - some fixed toolholder - signal lamp 3 colours - 15 bar coolant - double coolant filter