Used Milling Turning for sale (15,541)

Condition: new, Year of construction: 2025, This machine meets expectations where accuracy is key, perfect for school and industrial training workshops. Drilling, milling and turning done taking only a small amount of space. 2 x autofeed- longitudinal and cross. Technical data Swing over bed 320 mm Maximum working length 750 mm Swing after bridge removal 210 mm Spindle bore 38 mm Spindle taper MK5 Tool holder size 16x16 Transverse travel 160 mm Longitudinal travel 100 mm Metric thread 17 Metric thread pitch 0.5–4 mm Inch thread 20 Inch thread pitch 9–40 1/n'' Longitudinal feed 0.135–1.80 mm/turn Cross feed 0.025–0.34 mm/turn Tailstock quill extension 70 mm Tailstock quill taper MT3 Number of spindle speeds 6 Spindle speed 75–1900 rpm Motor power 1.1 kW, 230V 50 Hz Drilling and milling machine Spindle bore MK3 Number of spindle speeds Codpfx Adjricx Sekorh 4 Spindle speed 240–2700 rpm Maximum drilling diameter 16 mm Swivel head 360° Motor power 370 W Dimensions 1500×635×1200 Weight 390 kg Standard equipment - stand, - 2 dead centres, - set of gears, - set of soft jaws, - drilling chuck 16mm, - 3-jaw lathe chuck, - tools

Condition: used, _____ Description: Year of manuf. : 2009 Control : Siemens C200-4D SL In General: Codpfx Aevxmy Njdkorh Year of construction:2009 Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up Bar loader interface:Electrically prepared Tool monitoring:Drill breakage monitoring

Condition: like new (used), Year of construction: 2015, functionality: fully functional, turning length: 1,200 mm, spindle bore: 67 mm, PREPARATION for in-cycle steady rest, consisting of base carriage, unbored steady rest support bracket, and device for attachment to the Z carriage. Complete with steady rest 8–101 mm. Cedpfx Adjw Udk Uskerh

Condition: used, Year of construction: 2007, turning diameter 470 mm turning length 2500 mm control Siemens Sinumerik 840 D work height max. 1300 mm swing diameter over bed slide 750 mm swing over bed 780 mm diameter of quill 160 mm taper bore MK 5 tool numbers 48 weight of tools max. 15 kg tool length - max. 500 mm total power requirement 123 kVA weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 3,3 m C-axis: - Speed range - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis mm/min - Z-axis - mm/min Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle drive with 2-stage gearbox: - Drive power at 100/60% duty cycle: 37/45 kW - Total speed range: 10–2,500 rpm - Number of speed ranges: 2 - Speed range I: 10–775 rpm - Speed range II: 20–2,500 rpm - Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm) Csdpfow Rf Tisx Adkerh Equipment/accessories: - Forkardt power chuck with one set of hard and soft jaws each - Hydraulic steady rest - Tailstock with center point - Chip conveyor - Coolant device - 5 HSK 100 A holders - Technical documentation

Condition: good (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 450 mm turning length 800 mm control CELOS mit Siemens 840D sl total power requirement 74 kVA weight of the machine ca. 10 t Additional information Net purchase price at the time: €457,500 Max. turning length: 800 mm Main spindle, drive power: 25/32 kW Speed range: up to 5,000 rpm C-axis Draw tube inner diameter: 67 mm Top cross slide with turning/milling spindle Power: 19/22.5 kW Speed range: up to 12,000 rpm Tool holder: HSK-A 63 DIN 69893 Y-axis +/- 100 mm B-axis +/- 110° 24-station tool disc magazine Counter spindle Drive power: 12.5/14.5 kW Speed: up to 6,000 rpm Hydraulic partial hollow clamping device Draw tube diameter 52 mm Reamstock function for the counter spindle Absolute direct position measuring systems CELOS CNC control with Siemens 840D sl Hinged belt chip conveyor Fine chip package Coolant system 8/20 bar Chuck flushing system Coolant supply through the counter spindle Coolant spray gun Mechanical oil mist separator TC60 workpiece measuring probe, BLUM MPC 1.0 Machine Protection Control Automatic work area door Standard Profibus electrical interface for Robo2Go Energy meter Complete machining of shaft parts without process interruption on lathes with counter spindle DMG MORI NETSERVICE DMG MORI Io Tconnector DMG MORI Service Agent DMG MORI Messenger V2 Credpfxew Rfa Ao Adkoh SK 2017-5465 connection to the automatic loader SPANNTOP collet chuck GR-80 Automatic workpiece loader ILS-TBL-8012

Condition: excellent (used), Year of construction: 1995, Hello. I am offering a GILDEMEISTER CTX400 CNC LATHE for sale. TECHNICAL & VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX400 Credpfx Aew Trvvsdkjh Control: Heidenhain 1190 Country of manufacture: Germany Year of manufacture: 1995 Machine Specifications: - Turret: 12 tool positions for VDI-30 holders - Max. spindle speed: 5,000 rpm - Hydraulic tailstock - Finished part catcher - Max. turning diameter X-axis: 290 mm - Max. turning length Z-axis: 600 mm - Coolant system - 3-jaw hydraulic chuck, 200 mm - Spindle bore: Ø66 mm - Through spindle - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5.5 tons - Loading onto truck included in price The machine has undergone a full inspection. 100% operational. Connected and ready for work. For 17 years, Stal-Com company has been engaged in the sales, service, and training for CNC machines from the DMG group. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All our machines undergo thorough technical inspections. In addition to customers from Poland, our machines are purchased by clients all over Europe and parts of Asia. Every machine can be inspected under power during production, as we also provide contract machining services. After purchasing a machine from us, we provide operator training and can also assist in setting up part production at the customer’s site. We maintain long-term cooperation with many companies, supplying them with additional machine tools.

Condition: used, Year of construction: 2018, Technical details: turning diameter: 356 mm turning length: 705 mm control: CELOS M730 UM MAPPS swing dia.: 742 mm standard turning diameter: 275 mm travel -x axis: 260 mm travel -y axis: 100 (+-50) mm travel -z axis: 795 mm rapid travel - longitudinal/face: 30 / 30 m/min rapid traverse Y-axis: 10 m/min Rapid travel B-axis (parts transfer subspindle): 734 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 4500 1/min Spindle 2 power: 11 / 7,5 kW turret stations / rotary tool stations: 20 / 20 BMT40 : 5.5/5,5/3,7 kW speed of driven tools: 10000 1/min total power requirement: 38 kVA weight of the machine ca.: 6,3 t dimensions of the machine ca.: 4 (9) x 2,1 x 2,2 m Accerories Chip conveyor Barfeeder Interface Parts catcher Parts and total counter Signal lamp 3 colors Credpow Av T Sefx Adkoh Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) Conveyor for partsdisposal Automatic door Robot interface High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by CELOS-MAPPS 4 Control. Very low cutting hours. Machine is like new. All existing toolholders and life tool holders come with the machine. *

Condition: excellent (used), Year of construction: 2020, Distance between spinles 800mm, Y axis (+/-105mm), C axis 0.001 degrees, B axis -30/+210 degrees, main spindle speed 5,000rpm, sub spindle speeds 6,000 rpm, milling speed 12,000rpm, bar capacity 65mm, 38 station ATC, Crsdpew Nwfbsfx Adkjh spindle power 22/18.5 kw, Siemens 840D control, tool setter, through spindle coolant, magazine barfeed, robot loader,

Condition: good (used), Year of construction: 2003, For sale: Zayer 30KCU700AR (year 2003) with Heidenhain iTNC 530. - x, y, z = 7000, 2000, 1250 mm - CTS 15 bar - Controlled milling head (positional accuracy) Tools - 37 kW spindle motor - Rapid traverse 20/10 m/min - 4500 rpm - ISO50 - Renishaw RPM - Chip conveyor - Additional milling head (spare) Cjdpfx Aew Nqx Usdksrh

Condition: excellent (used), Year of construction: 2021, Great opportunity to buy an outstanding Doosan horizontal turning center built in december 2021 and first used in 2022. In excellent condition with subspindle, B- and Y-axis and less than 5000 spindle hours! Available for immediate purchase and can be inspected under power upon appointment in West-Flanders (Belgium). Optional: Cobot H2017 (Y2021) with 20 kg payload en 1700 mm reach. Schunk gripper (head jgz 100-1) - 2 grippers Cnc control SIEMENS Sinumerik 828D Max turning length 1245 mm Max turning diameter 376 mm Bar working diameter 102 mm X-axis travel distance 260 mm Y-axis travel distance 105 mm Z-axis travel distance 1350 mm B-axis travel distance 1350 mm C-axis travel degree 360 Turret BMT65 Number of tool stations 24 Max spindle speed main spindle 2800 rpm Max spindle speed subspindle (Built-in) 4500 rpm Machine dimensions (LxWxH) 4438 x 2049 x 2163 mm Machine weight 7950 kg Crjdpsw S I E Defx Adkeh Extra features and benefits: - 7 Bar Cooling Pump - Oil Skimmer - Part Catcher Conveyor Type - Bar Feeder Interface - Automatic Door - 3 Colour Signal Light - EasyLoader with Stainless Steel Grid Plate - Hardened jaws - Workpiece ejector - Robot interface - Bmt65 with 24 positions - Eppinger driven holder type 7173600 (3x) - Automatic tool setter - Tool load monitoring Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Year of construction: 2020, condition: ready for operation (used), X1-/ X3-axis: 180mm, X2-axis: 180mm, Y1-/ Y3-axis: ±45mm, Z1-/ Z3-axis: 704mm, Z2-axis: 620mm, E2-axis: 720mm, rapid traverse X, Y, Z-axis: 30m/min, spindle 1: max. speed: 5000/min, spindle bore: 65mm, chuck diameter: 210mm, spindle 2: max. speed: 7000/min, spindle bore: 42mm, max. chuck diameter: 140mm, spindle nose diameter: 110mm, max. chuck jaw weight: 1.25kg, number of stations: 2x12, number of driven tool stations: 2x12, max. speed: 8000/min, power S3 25%: 4.3kW, torque S3 25%: 13.6Nm. Length: 2880mm, width: 2130mm, height: 1990mm, weight: 7.5t, operating hours: 16,597.7h. Including bar feeder Top Automazioni X-FILES S, year of manufacture 2020, 4x tool holders, straight, left-right square mount, external coolant, 4x machine interface: BT45A, 1x milling head 90°/BMT 45 Spinner, angled milling head/ BMT45/ ESX-25 right and left twin-spindle, Spinner flat coupling, ER25 max. speed: 6000/min, i=1:1, raised design with center distance 85mm, 1x cut-off holder, rotation direction universal, external coolant. Regularly maintained, maintenance records available, an on-site inspection is possible. Codpew Sxx Uefx Adksrh

Condition: used, Year of construction: 2010, functionality: fully functional, turning length: 300 mm, turning diameter over cross slide: 20 mm, turning diameter: 20 mm, spindle speed (min.): 10,000 rpm, spindle speed (max.): 10,000 rpm, spindle bore: 20 mm, rotational speed (max.): 10,000 rpm, power: 30 kW (40.79 HP), Turning and milling center complete with bar feeder LNS HYDROBAR MINI SPRINT bar loader(Maximum bar length 3,000mm) DMG MORI SPRINT 20-8 Control: Fanuc 310i Main spindle speed: 10.000 rpm Power: 5,5 kW Csdpoq Nmm Ejfx Adkjrh torque: 14 Nm bar passage: max. 20 mm C1 axis: 0.001 travel Z1 axis: 80 mm Counter spindle speed: 10.000 rpm power: 5,5 kW torque: 14 Nm C2 axis: 0.001 Travel X2 / Z2 axis: 240 / 300 mm rapid traverse in X2 / Z2 axis: 40 m/min Tool carrier I (X/Y) Technology: Linear slide Internal machining: 6 stations tool holder: 20 mm External machining: 6 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck, ESX 16 Travel in X/Y axis: 50/350 mm Rapid traverse in X/Y axis: 40/30 m/min Tool carrier II (Y) Technology: Linear slide internal machining: 4 stations tool holder: 20 mm External machining: 4 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck , ESX 16 Travel in Y2 axis: 120 mm rapid traverse in Y2 axis: 40 m/min MACHINE DETAILS weight: 4200 kg Connected load: 30 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Chip management: chip conveyor Coolant management: Coolant pump Fire extinguishing system: Kraft + Bauer Oil mist extraction: Interface prepared Further equipment: Signal lamp

Condition: used, Year of construction: 2002, Technical details: turning diameter: 250 mm turning length: 900 total mm turning length: 300 mm control: Sinumerik 840 D bar material dia.: 65 mm chuck diameter: 250 mm turning diameter: 100 mm turning speeds: 2x 25-8.000 1/min positive location each: 2xC-Achse, 0,001° Grad Sub spindle: ja/yes turret (x-stations): 2x 12-fach VDI 25 driven tools: 2x 12 turning speeds: 5000 1/min total power requirement: 50 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 4,8 x 2,2 x 2 m Credpfowlfytjx Adkoh Machine will be sold without bar feeder magazine. *

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, 1020mm max turning length, 5000rpm main spindle, Crsdpfx Adjw Npz Iekeh 5000rpm Sub spindle, 65mm bar capacity, 12 station lower turret, 12000rpm milling 18.5kW, 22kW spindle motors, FANUC 3iTB control, 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Condition: used, Year of construction: 2011, turning diameter 16 mm turning length 145 mm control Sinumerik 828 D number of spindle speeds 15000 gripping station 16 spindle speed: 15000 load magazine ILS-MUK 7012 Breuninger Irco high-pressure pump Knoll total power requirement 15 kW weight of the machine ca. 2,6 t dimensions of the machine ca. 2.1 x 1.1 x 1.9 +Irco ILS mm Turn-mill centre for maximum precision Benzinger DoLittle B3, built in 2011 with short barloader Irco ILS-MUK 7012 (bar length 1200mm) Excellent conditions! - Dolittle B3 main and counter spindle with linear tool structure Tool stations: Main spindle 10 tools + 1 stop (2 blocks 5 tools each + 1 stop) Counter spindle 11 tools (2 blocks of 5 and 6 tools) Driven tools via the swivelling axis 6 tools Machine ON/OFF: 1 shift There are 10 tool blocks in total. Codsvxa E Sepfx Adkorh Technical data - Traverse path X1 axis 320mm - Traverse path Z1 axis 145mm - Traverse path Z2 axis 90mm - Traverse path Y-axis 80mm - 2x C-axis - Rapid traverse speeds X/Y/Z 30 m/min - Water-cooled motor spindle 16 mm, 15,000 1/min - BENZINGER linear tool carrier system - Swivelling NC axis with 6 driven tools Accessories: Knoll high-pressure pump Hydra cooling system Suction channel Tool holder, collets 10 tool blocks

Condition: good (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning and milling machine - TX8 D control - Complete technical data see photos - Year of manufacture: 1994 - Hydrobar bar feeder magazine - Various driven tool holders Csdpfxsw D Df Es Adkorh - Tool holder - Three-jaw chuck - Complete documentation Subject to errors and input mistakes.

Condition: excellent (used), Year of construction: 2019, operating hours: 34,775 h, functionality: fully functional, machine/vehicle number: BDT5206F0124, turning length: 350 mm, turning diameter over cross slide: 260 mm, turning diameter: 150 mm, spindle motor power: 7,500 W, spindle speed (min.): 50 rpm, spindle speed (max.): 4,500 rpm, spindle bore: 55 mm, travel distance X-axis: 175 mm, travel distance Y-axis: 35 mm, travel distance Z-axis: 450 mm, tool mount: 20 mm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 18 m/min, rapid traverse Z-axis: 24 m/min, milling spindle length: 13 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, feed length X-axis: 175 mm, feed length Y-axis: 35 mm, feed length Z-axis: 450 mm, torque: 14 Nm, bar passage: 50 mm, feed rate X-axis: 18 m/min, feed rate Y-axis: 18 m/min, feed rate Z-axis: 24 m/min, total height: 1,800 mm, total length: 2,600 mm, total width: 1,950 mm, collet bore: 55 mm, bar diameter: 50 mm, quill travel distance: 450 mm, spindle nose: A2-5, swing diameter over bed slide: 260 mm, overall weight: 5,100 kg, spindle diameter: 55 mm, working range: 350 mm, tool length: 20 mm, turning diameter over bed slide: 260 mm, Capacity Swing Over Saddle: 260 mm Chuck Type: DIN 177E Max. Bar Turning Length: 150 mm Max. Turning Length: 350 mm Max. Turning Diameter: 150 mm Max. Turning Bar Diameter: Ø50 mm Max. Turning Bar Diameter: 175 mm (X1) Travel Z1 / Z2 Axis Travel: 450 mm (Z1) Y1 Axis Travel: ±35 mm X1 / X2 Axis Rapid Traverse: 18 m/min (X1) Z1 / Z2 Axis Rapid Traverse: 24 m/min (Z1) Y1 Axis Rapid Traverse: 18 m/min Spindle Spindle Nose: A2-5 Hole Through: 55 mm Spindle Speed: 50 – 4500 rpm Spindle Motor Type: β8 / 12000i Spindle Motor Power (Continuous/30min): 7.5 / 11 kW Turret Number of Tool Stations: 12 O.D. Tool Size: 20 mm I.D. of Boring Bar Holder: 25 mm Turret Indexing Time: 0.1 – 0.3 sec Tool Spindle Speed: 6000 rpm Tool Spindle Motor Type: α2 / 10000i Tool Spindle Power (Continuous/30min): 2.2 / 3.7 kW Tool Spindle Torque (Continuous/30min): 14 / 23.5 Nm Drilling Capacity: Ø13 mm Endmill Capacity: Ø13 mm Tapping Capacity: M8 mm Sub-Turret Number of Tool Stations: 8 O.D. Tool Size: 20 mm I.D. of Boring Bar Holder: 20 mm Cedpfxjw Sacze Adkorh Turret Indexing Time: 0.1 – 0.3 sec Tool Spindle Speed: 6000 rpm Tool Spindle Motor Type: α8 / 6000i Tool Spindle Power (Continuous/30min): 2.2 kW Tool Spindle Torque (Continuous/30min): 22 Nm Drilling Capacity: Ø13 mm Endmill Capacity: Ø13 mm Tapping Capacity: M8 mm X1 / X2 Servo Motor: 1.8 kW Z1 / Z2 Servo Motor: 1.8 kW Y1 / Y2 Servo Motor: 1.8 kW Turret Servo Motor: 0.75 kW Coolant Pump: 0.9 kW High Pressure Cutting Fluid Pump: 0.4 kW High Pressure Cutting Fluid Pump: 3.75 kW Parts Conveyor Motor: 0.03 kW Chip Conveyor Motor: 0.2 kW Lubrication Pump: 0.003 kW Oil Mist Collector: 0.75 kW Tank Capacity Hydraulic Tank Capacity: 55 L Lubrication Tank Capacity: 2 L Coolant Tank Capacity: 250 L Machine Machine Dimensions (W × D × H): 2600 × 1950 × 1800 mm Machine Weight: 5100 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter: 500 mm, DMG CTX Beta 1250 TC 2009 Cedpfxev N Hc So Adkerh

Condition: used, Year of construction: 2020, Technical details: turning diameter: 670 mm turning length: 1540 mm control: F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover: 700 mm Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm Rotation B-axis: -30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 20,2/18,8 kW Torque of milling spindle: 120 / 44 Nm tool taper milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool/tool, milling spindle: 1,25 s Csdpowl Ag Djfx Adkerh Spindle 1 RPM: 3000 1/min Spindle 1 Power: 36 / 30 / 25 kW C-axis spindle 1: 0,001 ° Bar capacity spindle 1: 102 mm Spindle 2 RPM: 4000 1/min Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 80 mm dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m Linear scales on axis: X, Y programmable steady: KLU-A530 & SLU-X3.2 Accerories Chip conveyor tool setting spindle load monitor Airblow system Airblow system internal to cutting tool Spindle 1 Chuck Kitagawa 250 (B 210) mm Spindle 2 Chuck Kitagawa 250 (B 210) mm Interface for coolant through the spindle 70 bar Tailstock specification for spindle 2 Measuring probe for work piece Renishaw OMP60 pendant hand wheel Parts and total counter Signal lamp 3 colors Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear window Quick fixed cycles Program restart Signal lamp 4 colours Ethernet I/P Interface manual tool eye Automatic door Air Filter Oil skimmer Tactile sensor for workpiece measuring Airblow system external Subspindel Spindle 1 coolant jet Spindle 2 coolant jet Coolant Gun Coolant through spindle 70 bar with filter Knoll High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock. It has automatic door and Matris robot R-2000iC/165F. *

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm, 22kW spindle motors, Crjdew I Tniopfx Adksh FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Year of construction: 2017, condition: ready for operation (used), A compact and high-precision Hyundai CNC turning and milling machine is available. Travel X/Z: 220mm/560mm, rapid traverse X/Z: 36m/min, max. turning diameter: 310mm, max. turning length: 521mm, spindle clearance: 65mm, speed: 4000rpm, spindle power: 15kW/11kW, tool positions: 12, coolant capacity: 200l. Machine dimensions X/Y/Z: approx. 4250mm/1700mm/2450mm, weight: approx. 4600kg, control: Fanuc F0i-A with Manual Guide, operating hours: approx. 3200h. Including chip conveyor CC-D230, extraction system LNS WS 2-500E with oil mist separator and transformer. Documentation available. On-site inspection is possible. Crsdpfx Adewkuzkokoh

Condition: excellent (used), Year of construction: 2019, operating hours: 25,649 h, functionality: fully functional, machine/vehicle number: BDT5206M0135, turning length: 150 mm, turning diameter over cross slide: 260 mm, turning diameter: 50 mm, spindle motor power: 8 W, spindle speed (min.): 50 rpm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 18 mm, travel distance Y-axis: 35 mm, travel distance Z-axis: 450 mm, milling spindle length: 350 mm, type of input current: three-phase, torque: 24 Nm, Swing Over Saddle: 260 mm Chuck Type: DIN 177E Max. Bar Turning Length: 150 mm Max. Turning Length: 350 mm Max. Turning Diameter: 150 mm Max. Turning Bar Diameter: Ø50 mm Max. Turning Bar Diameter: 175 mm (X1) Travel Z1 / Z2 Axis Travel: 450 mm (Z1) Y1 Axis Travel: ±35 mm X1 / X2 Axis Rapid Traverse: 18 m/min (X1) Z1 / Z2 Axis Rapid Traverse: 24 m/min (Z1) Y1 Axis Rapid Traverse: 18 m/min Spindle Spindle Nose: A2-5 Through Hole: 55 mm Spindle Speed: 50 – 4500 rpm Spindle Motor Type: β8 / 12000i Spindle Motor Power (Continuous/30min): 7.5 / 11 kW Number of Tool Stations: 12 positions O.D. Tool Size: 20 mm I.D. Boring Bar Holder: 25 mm Turret Indexing Time: 0.1 – 0.3 sec Tool Spindle Speed: 6000 rpm Tool Spindle Motor Type: α2 / 10000i Tool Spindle Motor Power (Continuous/30min): 2.2 / 3.7 kW Tool Spindle Torque (Continuous/30min): 14 / 23.5 Nm Drilling Capacity: Ø13 mm End Mill Capacity: Ø13 mm Tapping Capacity: M8 Tool Spindle Torque (Continuous/30min): 22 Nm Drilling Capacity: Ø13 mm End Mill Capacity: Ø13 mm Tapping Capacity: M8 X1 / X2 Servo Motor: 1.8 kW Z1 / Z2 Servo Motor: 1.8 kW Y1 / Y2 Servo Motor: 1.8 kW Turret Servo Motor: 0.75 kW Coolant Pump: 0.9 kW High Pressure Cutting Fluid Pump: 0.4 kW High Pressure Cutting Fluid Pump: 3.75 kW Parts Conveyor Motor: 0.03 kW Chip Conveyor Motor: 0.2 kW Lubrication Pump: 0.003 kW Oil Mist Collector: 0.75 kW Tank Capacity – DT52 Main Spindle Hydraulic Tank Capacity: 55 L Lubrication Tank Capacity: 2 L Crodpow R U D Rofx Adkeh Coolant Tank Capacity: 250 L

Year of construction: 1997, condition: ready for operation (used), Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Codpfxsu T Rgkj Adkorh

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300/ -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, turning lengths: 1500/2000/2500/3200/4000/4500/6500mm, swing diameter: 780/ 880mm, turning spindle bore: 92/123mm, main spindle speed range: min, max. Turning/milling unit speed: 5000/6000/10000/min, max. tool length: 900/600/1000/300/900mm, quill stroke: 160/170mm, connected load: 102kVA, control system: SINUMERIK ONE / SINUMERIK 840D sl, drive system control: SINAMICS S120, weight: 17t. On-site inspection is possible. Credpfjwbuyzsx Adkeh

Year of construction: 2004, condition: ready for operation (used), A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible. Credpfx Aewmdv Aedksh