Used Mfh 5000 for sale (2,163)

Condition: used, Year of construction: 2017, Used 2014 XYZ SMX 5000 CNC / Manual Bed Milling Machine. Supplied with ProtoTRAK SMX Control, Electronic Handwheels, TRAKing & DXF File Reader, Power Drawbar, Fully Programmable Spindle Drive and Custom-Made Splash Guards. SPECIFICATION: TRAVELS: X Axis: 1,524 mm Y Axis: 596 mm Z Axis: 540 mm Maximum Daylight Under Spindle: 610 mm Quill Travel: 140 mm TABLE: Length: 1,930 mm Bodpfx Aezgwq Dedrodd Width: 356 mm T-Slot Width: 15.9 mm Maximum Table Load: 850 kg SPINDLE: Motor Power: 5.75 kW (7.5 HP) Speed Range: 40 - 5,000 rpm Taper: ISO 40 Quill Diameter: 116 mm Programmable Spindle Drive HEAD: Head Tilt Left: 45° Head Tilt Right: 45° CONTROL: ProtoTRAK SMX Conversational CNC Control Electronic Handwheels TRAKing Function EQUIPMENT: Power Drawbar Splash Guards GENERAL: Machine Weight: 3,100 kg

Condition: good (used), MARK ANDY XP 5000 / 13"  Year: 2008  Webwidth: 330mm / 13" Equipment:  UNWINDER  7 x FLEXO PRINTING  Add. 1 x WATER COOLING  2 x DIE-CUTTING  LABELSHIFTER  BST CAMERA  UV-DRYER  REWINDER  Web edge Control Bdodpetubz Asfx Adrjd  Control Panel  Optican for Sheeter  Lot off Printing/Magnetic Cylinder  Anilox

Condition: good (used), Year of construction: 2013, MARK ANDY XP 5000 / 13" - 4-color  Year: 2013  Webwidth: 330mm / 13" Bsdpfetubz Ujx Adredd Equipment:  UNWINDER  4 x FLEXO PRINTING  BST CAMERA  UV-DRYER  HOT AIR  1 x DIE-CUTTING GAPMASTER  1 x DIECUTTING GAPMASTER  100% TUBE SCAN CONTROL  REWINDER  Web edge control  Control Panel  Lot off printing/magnetic cylinder  Anilox Please contact me if you have any questions. Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: excellent (used), Year of construction: 2008, operating hours: 12,100 h, lifting height: 4,500 mm, fuel type: gas, mast type: duplex, color: yellow, BAUMANN sideloader Year of manufacture: 2008 12,100 operating hours Fork spread adjustment New tires Lifting height: 4.5 meters Maximum load capacity: 5,000 kg Cevoman bv. Lenskensdijk 5 2200 Herentals Bdjdpfx Adszhvc Usrjd Belgium

Condition: ready for operation (used), * Brand: Svedala Bdodezgf Aujpfx Adrod * Model: vibrating chute * Dim: length 5000 mm - width 1000 mm * incl.: steel construction and grizzly bars.

Condition: new, Manufacturer: Festo Product type: Energy efficiency module Type: MSE6-E2M-5000-FB33-AGD Part number: 3850287 Series: MS6 Communication interface: PROFIBUS DP Nominal flow rate: 5000 l/min Connection size: G 1/2 Bdodpozgaxdefx Adred Operating medium: Compressed air according to ISO 8573-1 Function: Monitoring, diagnostics, and optimization of compressed air consumption Function: Recording of flow, pressure, and consumption data Function: Leakage detection Function: Automatic pressure shut-off during production downtime Supply voltage: 24 V DC Protection class: IP65

Condition: excellent (used), Year of construction: 2021, operating hours: 4,236 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: FANUC, controller model: FANUC 31i-MB5, workpiece height (max.): 450 mm, workpiece diameter (max.): 550 mm, workpiece weight (max.): 400 kg, total height: 2,900 mm, total length: 3,400 mm, total width: 2,700 mm, table load: 400 kg, rotary table diameter: 500 mm, overall weight: 7,500 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2,102 h, coolant supply: 70 bar, distance table center to spindle nose: 550 mm, spindle motor power: 11 W, spindle nose: ISO 40, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 75 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used 5-axis vertical machining center with FANUC CNC, optical scales on the x-y-z axes, 60-place tool magazine and 70 bar pump and TS27R tool pressure probe + MP60 probe Bdedjzfp U Espfx Adrod

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Ricoh IP5000 AD3/AD4 128m Counter A: 100 million Bodpfjwk Eilox Adrsdd Counter B: 80 million Includes Hunkeler UW6 and RW6 with tight web control!! Hunkeler POPP6 Roll2Roll Pictures are available upon request. All of the equipment mentioned is not for sale/resale in Russia, or in any country subject to an EU embargo.

Condition: excellent (used), Keyence Here we offer a 3D profilometer. Technical specifications: Observation and measurement range: Horizontal: mm 24.0 12.0 8.0 6.0 7.6 3.8 2.5 1.9 Vertical: mm 18.0 9.0 6.0 4.5 5.7 2.9 1.9 1.4 Measurement resolution 0.1 μm: Height measurement: Height measurement range, without image composition in Z: 10 mm 1 mm With image composition in Z: 50 mm 30 mm Repeatability (σ)*1, without image composition in Z: 0.4 µm With image composition in Z: 1.0 µm Bdedpfx Adozd Uhzsrjd Width measurement: Measurement accuracy*1, without image composition in Z: ±2.5 μm With image composition in Z: ±4.0 μm Repeatability (σ) *1 1 μm 0.5 μm Measurement accuracy*1 ±5 μm ±2 μm XY travel: 184x88 mm Z travel: 73 mm Includes control unit VR-5000 + software with licenses Type: VR-5200 + VR-5000 For sale from our location! Condition: fully functional + no signs of wear For further technical information, please refer to the manufacturer. Scope of supply: (As shown in the picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2010, Duplo booklet maker System 5000 Bedpfx Adjx Ir Ensrodd offer consists of: - 2x collators DC-10/60 - lifting unit LUL-HM - bookletmaker DBM-500 - trimmer DBM-500T - preset kicker DBM-K - conveyor DBM-400LS Duplo System 5000 booklet maker 2xDC-10/60: collator - number of bins: 20 - paper size: width: min. 120mm, max. 350mm length: min. 148mm, max. 500mm - paper weight: 0-300g/sqm - loading volume: 60mm - feeding system: belt suction feed system - conveyance system: roller belt conveyance system - power supply: 120 to 240 V 50/60 Hz - power consumption: 9.5A (120 V 60 Hz), 4.5A(220-240V, 50Hz) DBM-500: stitcher folder - paper size: min. 120x170mm; max. 350x500mm - process speed: >5000 pcs/h, A5 >4600 pcs/h, A4 >4000 pcs/h, A3 - No. of stitches 0 to 2 - stitch thickness within 5mm - wire diameter #25 to #27 - folding capacity: below 25 sheets - dimensions: 2,230 (W) x 865 (D) x 1300 (H) - ratings: 120 to 240 V 50/60Hz 6.5-3.8A - weight: 412kg DBM-500T: Trimmer - booklet size: min. 85x120mm; max. 250x356mm - trimmed booklet size: min. 75x120mm - speed: ut to 5000 sets per hour - power consumption: 120V 690Hz 10A - dimensions: 700mm x 635mm x 1094mm - weight: 532 lbs (241kg) We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 5,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, technical inspection anytime after appointment Technical data: Bdsdpfx Aowk Iq Eedrod - distance between centers/turning length: 5000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 1800 mm height: 1800 mm total weight: 7300 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 5,000 mm, total length: 7,500 mm, total width: 2,130 mm, total height: 1,550 mm, rotational speed (max.): 630 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B1/5M universal lathe has been comprehensively rebuilt and modernized and has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. Bdodpfx Adova Elajred The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: in stock, under power, ready for technical acceptance. Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - Power feed on compound slide for machining tapers, conical parts, 1°- 90°, up to 450 mm - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 22/41 (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 2130 mm height: 1550 mm total weight: 13200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, chip tanks Additional equipment available for price upgrade: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: reconditioned (used), modernized machine with new LTG StoreControl P control system External dimensions: Overall height: 5000 mm Overall width: 2650 mm Overall depth: 1250 mm plus 300 mm discharge table 34 carriers, each with a payload of 140 kg in the clear internal dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch: 254 mm Bdjdpfxednfdle Adred Discharge table at 1000 mm above the top edge of the machine frame, with a wooden worktop Color: GRAY, surfaces cleaned, signs of use possible Motor power, drive: 1 x 1.8 kW / 400 Volt Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: used, Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Bodszg Hvpepfx Adrsdd Length: 2600 mm Width: 2200 mm Height in horizontal position: 1700 mm Weight: approx 4 T

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request Bdsdpfxoymqz Rs Adrod terms of payment: 100% prior to delivery

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,356 h, load capacity: 4,500 kg, lifting height: 5,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,500 mm, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,250 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200X50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,440 kg, empty load weight: 6,940 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ45G – 2017 | 1365 hours | LPG | DUPLEX 5000 mm | FORK POSITIONER Ready for use from day one – no investment, no risk ✅ Why choose this forklift? Need a machine that won’t disrupt your workflow? ⚙️ This HUBTEX DQ45G is fully serviced and ready for immediate operation – no hidden costs. ✔️ Full service (oils, filters, complete inspection) ✔️ Condition: like new ✔️ Only 1365 operating hours ✔️ New tyres – no additional investment required Key Specifications 🔹 Capacity: 4,500 kg 🔹 Drive: LPG 🔹 Mast: Duplex – 5,000 mm 🔹 Fork positioner: 1,250 mm 🔹 Forks: 1,250 mm 🔹 Cabin: fully enclosed, heated Technical Data 🔹 Year: 2017 🔹 Hours: 1,365 🔹 Weight: 6,940 kg 🔹 Load centre: 600 mm Mast & Lifting 🔹 Duplex mast 🔹 Lifting height: 5,000 mm Dimensions 🔹 Height: 2,600 mm 🔹 Length: 2,500 mm 🔹 Width: 2,250 mm Chassis 🔹 Superelastic tyres (100%) – new Equipment 🔹 Heated full cabin 🔹 Fork positioner 🔹 Lighting Condition ✔️ Technical: 5/5 ✔️ Visual: like new Perfect for 🏭 Narrow aisles Bjdpfszgxr Ajx Adrsdd 🌲 Timber/steel industry 📦 Long loads 🌍 Indoor & outdoor applications What you receive ✔️ Fully tested machine ✔️ Ready for immediate use ✔️ Online demonstration available ✔️ Delivery to your location Delivery & Service 🚛 Europe-wide transport 📦 Comprehensive logistics support 💼 Leasing options available 🔧 After-sales support Why FT LOGISTICS? ✔️ 100+ machines in stock ✔️ In-house service team ✔️ Extensive European experience ✔️ Trusted by numerous clients FT LOGISTICS – Forklifts that get the job done.

Condition: excellent (used), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analytical); 0.000 to 3.000 ml/min (capillary) Flow rate accuracy: < 0.1% Flow rate precision: < 0.1% Bodpfx Ajzdtlfodrodd Gradient dosing accuracy and precision: ± 0.5% at 2 ml/min (analytical only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analytical); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 24.1 kg (55 lb.) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus dual pump 6-port valve MXP9900-000 AFC-3000 automated fraction collector RFC-10 regulator Condition: used Scope of supply: (See pictures as shown) (Subject to change and errors in technical data and specifications!) We will gladly answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1970, grinding diameter: 1,200 mm, grinding length: 5,000 mm, Accurite digital readout Chuck diameter 900 mm Crank shaft head counter balance weight 2 x 4 different sizes  4 x steady rest dressing device  6 segment stone up to 1500 mm diameter In feed stone 0,0025 - 0,050 mm Bjdpfewrxqxsx Adredd Table feed rate 50 - 3975 mm/Min Coolant & Filtration system Centre height: 600mm Grinding Ø: 1200mm Grinding length: 5000mm Grinding stone dimensions:1600 x 100mm Grinding stone speeds: 1620Rpm Length: 17500mm Width: 5500mm Height: 2200mm Weight: 60000kg

Condition: like new (used), Year of construction: 2017, operating hours: 1,075 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: Fanuc, table width: 500 mm, table height: 500 mm, table load: 500 kg, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 70 bar, Horizontal Machining Center DMG MORI NHX 5000, 2nd Generation Control: M730UM Celos X: 730mm Y: 730mm Z: 880mm Milling Spindle Interface: HSK63-A Speed: 20-15,000/min Power: 37 kW Torque: 250 Nm Pallets Number: 2 Size: 500x500 Load capacity: max. 500 kg Type: Grid pattern Tool magazine Positions: 60 Type: Rotary Bdedpfszdllwox Adred Coolant system: Knoll system, 70 bar Mist extractor The machine comes from a research institute and has only run for approximately 1075 spindle hours to date. Condition: as new Availability: short notice

Condition: used, Year of construction: 2008, machine/vehicle number: DEPAL43, Used TMG VEGA 60 automatic Depalletizer 5000 BPHTechnical Specifications & Performance DataThis Automatic Depalletizer VEGA 60 is a robust solution engineered for reliable bottle handling in industrial packaging environments. Manufactured by TMG, it supports efficient unloading of bottles from pallets and integrates automatic interlayer management for streamlined operation. With a production speed of 5000 bph, it is well-suited for medium-capacity beverage production and used bottling line applications. Its design ensures consistent performance for Glass containers, particularly in 1.5L formats.Manufacturer: TMG Model:VEGA 60 Year: 2008Production speed: 5000 bphBottle formats: Compatible with 1.5L bottle formatsContainer types: Designed for Glass bottle handlingAutomation: PLC-controlled operationSafety: Electronic safety barrier Interlayermanagement: Tier-sheet magazine with automatic interlayer removal; can remove protective hoods from the same magazine Advanced Automation & Control Systems The VEGA 60 features PLC-based automation for precise and repeatable operation across shifts. The control logic enables smooth layer-by-layer depalletizing, coordinated motions, and clear fault diagnostics. The electronic safety barrier provides active operator protection, ensuring safe access during setup and maintenance while maintaining productivity. Quick settings allow fast adaptation to standard 1.5L bottle handling and efficient start-up after pauses.Production Line Integration CapabilitiesThis depalletizer integrates easily within new or second hand bottling equipment configurations. It can operate as a standalone depalletizing module or inline with conveyors, accumulation tables, rinsing machines, and downstream filling, capping, and labeling machinery. The automatic tier-sheet handling reduces manual intervention between layers, improving flow to subsequent packaging machinery. Its design supports Glass bottle logistics, making it a flexible choice for beverage production lines handling water, juice, beer, or wine in compatible formats.Machine Condition & Maintenance HistoryProfessionally engineered by TMG in 2008, this machine is presented as a second hand industrial packaging asset suitable for immediate integration once installed and commissioned. The PLC control and robust mechanical design contribute to predictable maintenance intervals and long service life.Operational Performance & VersatilityAt 5000 bph, the VEGA 60 is ideal for medium-output operations seeking dependable depalletizing performance. Automatic interlayer and hood removal minimize manual handling, reducing changeover time between pallet layers and enhancing workplace safety. The system is optimized for 1.5L bottles and supports Glass containers, aligning with a wide range of beverage production requirements and used bottling line upgrades.Installation Requirements & Site PreparationThe depalletizer requires adequate floor space for pallet infeed, tier-sheet magazine access, and discharge conveyor alignment. Power supply must match the PLC and drive requirements, and provision for compressed air may be needed for actuators and safety systems. A level, reinforced floor and clear operator access paths are recommended t... Bdjdezc Hqyepfx Adrjd

Year of construction: 2017, condition: ready for operation (used), travel distance X-axis: 900 mm, controller manufacturer: SIEMENS, controller model: SINUMERIC TOUCH DITTLE control, overall weight: 40,000 kg, total width: 2,700 mm, total height: 2,500 mm, spindle motor power: 31,000 W, product length (max.): 11,500 mm, spindle speed (max.): 2,000 rpm, number of axes: 4, This 4-axis WALDRICH KLEINKNECHT WS III C 6.00 X 5000 CNC was manufactured in 2017. It features a maximum grinding length of 5,000 mm and a roll diameter capacity of approximately 600 mm. The machine is equipped with a modern CNC control system and includes essential safety equipment. If you are looking to get high-quality grinding capabilities, consider the WALDRICH KLEINKNECHT WS III C 6.00 X 5000 CNC cylindrical grinding machine we have for sale. Contact us for further details. Bjdpfezcnikox Adredd - Control Voltage: AC 230 V 50 Hz, DC 24 V, AC 24 V- Network System: TN- Mains Voltage: 3 AC 400 V ±5%- Mains Frequency: 50 Hz ± 1%- Solenoid Valve Voltage: DC 24 V- Coupling Relay Voltage: DC 24 V- Control Voltage for Monitor and PCs: AC 230 V 50 Hz- Ambient Temperature: > 5 and < 35°C- Relative Humidity: < 85%- Altitude: < 1000 m above sea level- Noise Level (Machine): < 75 dB (A)- Max. Grinding Diameter (with Ø 915 mm grinding wheel): 1,100 mm- Min. Grinding Diameter (with new grinding wheel 915 mm): 0 mm- Min. Grinding Diameter (with abraded grinding wheel 580 mm): 300 mm- Max. Workpiece Weight (in steady rests, limited by headstock framework size): 6,500 kg- Max. Workpiece Length (retracted faceplate): 5,450 mm- Center Height: approx. 750 mm- Max. Clearance Width (retracted faceplate and tailstock quill): 5,450 mm- Barrel Length: 5,150 mm- Connected Load: approx. 200 kVA (Connection power listed as 123 kW)- Machine Length: approx. 11,500 mm[- Machine Width: approx. 2,700 mm- Machine Height: approx. 2,500 mm- Machine Weight: approx. 40,000 kg- Headstock Motor Power: 22 kW- Headstock Drive: V-belt- Headstock Torque: 208 Nm- Headstock Speeds: 1-100 min⁻¹- Tailstock Center Sleeve Taper: Metric 80- Tailstock Movement: Motorized- Tailstock Clamping: Spring clamping cylinder- Tailstock Quill Travel: 270 mm- Tailstock Quill Movement: Manual and motorized- Z-Axis (Longitudinal Axis) Max. Speed: 0-6,000 mm/min- Z-Axis Motor Type: Siemens 1FT7- Z-Axis Rated Torque: 28 Nm- Z-Axis Stall Torque: 50 Nm- Z-Axis Motor Speed: 3,000 min⁻¹- X-Axis (Infeed Axis) Speed: 0-1,000 mm/min- X-Axis Motor Type: Siemens 1FT7- X-Axis Rated Torque: 3.7 Nm- X-Axis Stall Torque: 6.0 Nm- X-Axis Motor Speed: 6,000 min⁻¹- X-Axis Travel: 900 mm- X-Axis Infeed Accuracy: 1.0 µm- U-Axis (Eccentric Spindle) Speed: 50 mm/min- U-Axis Motor Type: Siemens 1FT7- U-Axis Rated Torque: 2.0 Nm- U-Axis Stall Torque: 3.5 Nm- U-Axis Motor Speed: 6,000 min⁻¹- U-Axis Travel: 3.0 mm- U-Axis Max. Crown (Radius): 1.5 mm- U-Axis Infeed Accuracy: 0.1 µm- Grinding Spindle Motor Type: Siemens 1PH8165-1DD00-2FA1- Grinding Spindle Motor Power: 31 kW (Optional upgrade to 71 kW motor at 1000 min⁻¹ and 673 Nm supported)- Grinding Spindle Motor Speed: 1,350 min⁻¹- Grinding Spindle Speed: 80-2,000 min⁻¹- Grinding Spindle Motor Torque: 257 Nm- Max. Cutting Speed (with corundum wheels): 45 m/s- Max. Cutting Speed (with CBN wheels, min. diameter 700 mm): 65 m/s- Grinding Wheel Max. Diameter: 914 mm- Grinding Wheel Min. Diameter: 580 mm- Grinding Wheel Bore: 508 mm- Grinding Wheel Max.

Condition: good (used), turning length: 5,038 mm, spindle motor power: 80,000 W, spindle bore: 122 mm, travel distance X-axis: 490 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 5,038 mm, total height: 3,300 mm, total length: 16,000 mm, total width: 4,900 mm, overall weight: 30,000 kg, Multi-tasking lathe HEYLIGENSTAEDT - Heynumat 35/5000 MACH-ID 9642 Make: HEYLIGENSTAEDT Type: Heynumat 35/5000 Control: SIEMENS 840D Max. turning Ø: 890mm X-Axis: -10 to +490mm Bdodpfxozcmzxs Adrsd Y-Axis: -130 to +300mm Z-Axis: +180 to -5038mm Spindle bore: 122mm Speedrange: 2200Rpm Spindle power: 80kW B-Axis Toolsystem:Capto C8 Sandvik B-Axis Speedranges:2200Rpm B-Axis power: 28kW Length: 16000mm Width: 4900mm Height: 3300mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1990, cutting diameter 500 mm cutting length 5000 mm saw blade diameter 420 - 500 mm dimensions ca.6400 x 1500 x 1600 mm weight ca. 1600 kg feed stufenlos Bdedpfx Aev U Dluedred Motorized length adjustment with digital display manual and spare part list included

Condition: used, REDA RE 50 Cream Separator The REDA RE 50 Cream Separator is a high-performance dairy processing machine designed to efficiently separate cream from milk. Built with advanced technology, this separator ensures superior cream quality while maximizing yield. Key Features: Bdedpfx Aozfgbcsdred - Capacity: Designed for high volume, the RE 50 can process large quantities of milk, making it ideal for both small-scale and industrial dairy operations. - Efficiency: The separator operates with minimal energy consumption, ensuring cost-effective processing. - Durability: Constructed from high-quality stainless steel, the machine offers outstanding resistance to corrosion and wear, ensuring a long service life. - Easy Maintenance: With a user-friendly design, the RE 50 is easy to operate and maintain, saving valuable time for dairy processors. - Adjustable Settings:Users can customize the separation process to achieve the desired cream consistency and quality. The REDA RE 50 Cream Separator stands out in the market for its reliability, efficiency, and exceptional performance. It is the perfect choice for dairy farmers and processors looking to enhance their cream production. Capacity Skimming : 5000 Litres/ Hour Clarification: 7500 Litres/Hour Cream Skimming: 0.03% Tools: Included Control Panel: Included Water System and Pump: Included Base Plate: Included CIP: Yes Type: Automatic Cleaning Manuals: Included Export Packing: Included

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,356 h, load capacity: 4,500 kg, lifting height: 5,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,500 mm, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,250 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200X50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,440 kg, empty load weight: 6,940 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ45G – 2017 | 1365 hours | LPG | DUPLEX 5000 mm | FORK POSITIONER Ready for use from day one – no investment, no risk ✅ Why choose this forklift? Need a machine that won’t disrupt your workflow? ⚙️ This HUBTEX DQ45G is fully serviced and ready for immediate operation – no hidden costs. ✔️ Full service (oils, filters, complete inspection) ✔️ Condition: like new ✔️ Only 1365 operating hours ✔️ New tyres – no additional investment required Key Specifications 🔹 Capacity: 4,500 kg 🔹 Drive: LPG 🔹 Mast: Duplex – 5,000 mm 🔹 Fork positioner: 1,250 mm 🔹 Forks: 1,250 mm 🔹 Cabin: fully enclosed, heated Technical Data 🔹 Year: 2017 🔹 Hours: 1,365 🔹 Weight: 6,940 kg 🔹 Load centre: 600 mm Mast & Lifting 🔹 Duplex mast 🔹 Lifting height: 5,000 mm Dimensions 🔹 Height: 2,600 mm 🔹 Length: 2,500 mm 🔹 Width: 2,250 mm Chassis 🔹 Superelastic tyres (100%) – new Equipment 🔹 Heated full cabin 🔹 Fork positioner 🔹 Lighting Condition ✔️ Technical: 5/5 ✔️ Visual: like new Perfect for 🏭 Narrow aisles 🌲 Timber/steel industry 📦 Long loads 🌍 Indoor & outdoor applications What you receive ✔️ Fully tested machine ✔️ Ready for immediate use ✔️ Online demonstration available ✔️ Delivery to your location Delivery & Service 🚛 Europe-wide transport 📦 Comprehensive logistics support 💼 Leasing options available 🔧 After-sales support Why FT LOGISTICS? ✔️ 100+ machines in stock ✔️ In-house service team ✔️ Extensive European experience ✔️ Trusted by numerous clients Bjdpfx Aszff Stodrodd FT LOGISTICS – Forklifts that get the job done.