Used Metalski Zavod Tito Skopje for sale (116)

Condition: used, Year of construction: 1984, functionality: unexamined, machine/vehicle number: B30157, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, table length: 600 mm, table width: 380 mm, table load: 300 kg, spindle mount: MK 3, total height: 2,545 mm, total length: 1,700 mm, table height: 965 mm, total width: 1,330 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 900 m/min, rotational speed (min.): 30 rpm, rotational speed (max.): 2,500 rpm, drilling capacity: 30 mm, type of input current: three-phase, quill stroke: 140 mm, quill diameter: 85 mm, spindle diameter: 100 mm, spindle motor power: 8,200 W, workpiece weight (max.): 300 kg, rotary table diameter: 200 mm, Additional specs: Resolution: 0,001mm Max. capacity of boring: 220mm Machine weight: 2500kg Dwedpfx Adsungrgouec Additional equipment: - One rotating table with two rotating axis. - Collets, clamping elements miscellaneous, tool holders. - Documentation for machine

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 1321500165, Year of construction: 2023, operating hours: 10 h, load capacity: 3,000 kg, lifting height: 4,800 mm, free lift: 1,520 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,225 mm, power: 24 kW (32.63 HP), gearing type: automatic, battery capacity: 560 Ah, battery voltage: 80 V, DGUV certified until: 08/2025, fork carriage width: 1,228 mm, fork length: 1,070 mm, overall weight: 4,830 kg, total height: 4,095 mm, total length: 3,640 mm, total width: 1,298 mm, color: original, Equipment: cabin, lighting, sideshift, Technical data: Type: EP CPD30L1 (S) Load capacity: 3000 kg Load center of gravity: 500 mm Forks: on request Drive: electric Lifting mast: Triplex‑4,800mm Equipment: Full cabin with heating Side shift and fork adjustment Non-marking SE tires LED headlights Bluespot Warning lights Display Lifting height: 4800 mm Height: 2225 mm Free lift without/with LSG: 1520 mm/ 1130 mm Battery: 80V/560AH Li-ion (large battery) Charger: 80V/200A Application: The L1 series is more powerful than many competitors thanks to the built-in Li-ion technology. With their waterproof design, these forklifts can be used outdoors, even in the rain. They are particularly effective when loading and unloading loads. Dwedpovmyz Nsfx Adusc Features: Revolutionary Li-Ion technology: The L1 series is considered the world's first true Li-Ion forklift. By eliminating combustion engines and bulky lead-acid batteries, the truck has been designed from the ground up with ergonomics and performance in mind. Fast charging and high performance: The compact size of the battery allows for optimized truck sizing for maximum stability and safety. The L1 forklift can be charged in just 2.5 hours and offers the impressive ability to take up to 7% of charge in just 10 minutes. Waterproof design (IP54): All L1 series forklifts are water and dust resistant to IP54. This waterproof design allows for outdoor use, even in adverse weather conditions, which is not possible for many electric forklifts. AC motor performance improvement: The optimized 20L1S now has all AC motors, resulting in increased performance. This increases the efficiency and performance of the forklift. Large cabin with maximum legroom: Thanks to the completely redesigned chassis, the L1 forklift offers the most legroom in the industry. The compact battery creates sufficient space for the drivers' legs, which significantly improves driver comfort during long work shifts.

Year of construction: 1997, condition: good (used), Used fully serviced and good condition Trumpf 500r cnc punch press for sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale Fully serviced Machine capable of taking multi tool Complete with tool holders and tools including multi tools Complete with Retractable clamps 3metre x 1.5metre sheet without reposition. Additional extras with the machine: Cabinet full of tooling Multitool Multiset – tool setter Dwodpjhtfp Tofx Aduec Quickload Quick sharp tool grinder Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1997

Condition: ready for operation (used), Year of construction: 2002, operating hours: 11,676 h, functionality: fully functional, machine/vehicle number: KM-1148, punching force: 22 t, workpiece weight (max.): 230 kg, laser power: 3,200 W, punching diameter: 76 mm, workpiece length (max.): 1,650 mm, workpiece width (max.): 2,585 mm, sheet thickness (max.): 8 mm, No reserve price - guaranteed sale at the highest bid! Machine including SheetMaster and TrumaGrip TECHNICAL DETAILS Punching force: 22 tons Control: Siemens Sinumerik 840 D Punching working area: 3,085 x 1,740 mm Combined working area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono tool holder, 360° rotation Holder: Programmable for repositioning processes Chip handling: Chip bucket Laser unit: High-frequency excited CO₂ laser TruFlow Laser working area: 3,085 x 1,650 mm Laser power: 2,700 Watt Laser cutting heads: 5" lens, 7.5" lens, cutting head quick-change device Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg Switch-on time: 59,2344 h Laser cutting time: 11,676 h EQUIPMENT - Parts chute 500 x 500 mm, sensor-monitored - 2 good parts boxes - AutoLas - Ejection cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - 2nd lubricant container - Multi-beam Light barriers - Quick shutdown hydraulics - Extraction and compact dust extractor - MultiTool function - Thread forming function - Vibration-damped installation - Brush tables Dwodpfev Am Twsx Adusc - Chip conveyor with tilting container - Standard equipment SheetMaster 1606 - Loading station with spreading magnets - TRUMAGRIP scrap skeleton disposal unit with scissor lift table - Sheet thickness gauge for double sheet control - Suction plate module - Parts conveyor belt A deposit of EUR 7,500 is required for transport security.

Year of construction: 2025, condition: as good as new (ex-display), Our mobile winder, is one of our demonstration machines, condition good, slight scratches on the housing and on the chassis, Warranty 12 months, completely checked and serviced. On request with optional accessories such as a wide feeler strap. Warranty: 12 months (single-shift operation), The advantages at a glance: - Working area of only 750 mm around the pallet - Extremely compact design - Patented steering system - Compared to its competitors, it takes up to 40% less space - Easiest handling - German support - Upgrades are also optionally available later The LEO only needs 75cm (about a shoulder width) around the pallet to be wrapped. WORKSPACE Pallet size: Height: min. 500 mm / max. 2,000 mm Length: min. 600 mm / without limit Width: min. 600 mm / without limit Dwedpfx Adshfc Risusc Machine dimension: Height: 1,950 mm Length: 980 mm Width: 700 mm Pallet weight: min. 50 kg (optionally also lower possible) FILM DATA Wrapping programs: - Foot and head wrapping - Cross and one-way winding - with stop for cover sheet support Film width max. 500 mm Core diameter max. 76 mm Outside diameter max. 220 mm MACHINE DATA Tension: - Battery: 2x 12 volts - Charger integrated 220 volts - Drive: 2x 24 volts - Foil slide: 1x 24 volts Foil carriage: - own parameters for up and down movement - Mechanical film brake - stepless adjustment Control: - Touch panel with digital display - Speed dial buttons - Drawbar with navigation buttons - Pallet detection via tactile belt - Emergency switch - 6 storable working modes - Double collision protection Mast: Stationary construction Weight: 195 kg CE marked machine the wrapping of black products or the use of black stretch film. and can be charged with any cable with a Euro mains plug at a 230V household socket. Such a charging cable is of course part of the scope of delivery.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: MOO-297-150, measuring range X-axis: 2,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 900 mm, Equipment: documentation/manual, Excellent characteristics at measurements in the scanning mode with heads of the Leitz brand are also provided in KIM of the new Leitz Reference Xi and Leitz Reference XT series. In these of machine new series it is provided an impressive possibility of the choice of various systems of measuring heads - from a LSP-X1 model head in combination with a robot wrist with continuous movement of the TESASTAR-m model, motionless measuring head of LSP-X3c and to a head of the LSP-X5 model which remains functionally unsurpassed even when using with very long measuring tips or heavy cluster sets of replaceable measuring tips Dwjdpfxsvwl I Ao Aduec Accuracy of measurements is provided in any situation irrespective of whether measurements with application of the indexed motorized or motionless measuring heads are carried out. With use of the multitouch controller of the car of the Leitz Reference Xi and Leitz Reference XT series can be also equipped additionally with sensors of measuring systems of technical sight. The additional element "Xi" is entered into designation of cars of the Leitz Reference Xi series chosen from the term "fleXible" that indicates universality of the car. In addition, cars of the Leitz Reference XT series are cars which different the increased resistance to influence of temperatures: cars of the Leitz Reference XT series differ in reliable operational parameters in expanded (eXTended) the range of temperatures from 15 to 30 degrees Celsius due to application in their unique system of temperature compensation. This major operational quality for the production equipment.

Condition: used, Year of construction: 1968, functionality: unexamined, travel distance Z-axis: 950 mm, spindle speed (max.): 1,900 rpm, spindle speed (min.): 38 rpm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, table length: 1,000 mm, table width: 1,000 mm, table load: 2,000 kg, spindle mount: MK 5, total height: 3,500 mm, total length: 2,750 mm, table height: 850 mm, total width: 2,280 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, distance between stands: 1,575 mm, spindle diameter: 120 mm, spindle motor power: 11,000 W, spindle stroke: 300 mm, Additional techical specs: - Distance between pilars - 1575mm - Spindle speed: Nr.of gears: 18, Range 1:50: 18 to 1900 RPM, Stepup: 1,26 - Spindle feed: Drilling feed, nr. of gears: 15. Range: 0,03 to 0,8 mm/rev. Frictional feeds, nr.of gears: 3. Range: 2, 3 to 4 mm/rev. - Performance: Largest drilling diameter into solid material: 55mm for cast iron with feed: 0,6mm/rev. Largest drilling diameter approx.: 300mm Largest facing diameter: 620mm Largest cutting diameter (for steel,cast iron) approx.:120mm Dwodpfx Ajunhd Rjdusc Largest milling-cross section (with table feed): 150mm2 at a milling feed of: for cast iron- 400mm/min, for steel: 200mm/min Power of drilling motor: 6 HP Power of lifting motor: 5 HP Connected load of the machine: 11kW Extras: coilets, tool holders, other additional equipment, documentation for machine

Condition: as good as new (ex-display), Year of construction: 2015, operating hours: 3,700 h, functionality: fully functional, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, workpiece weight (max.): 5,000 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 150 mm, table length: 4,500 mm, operating speed: 1,000 mm/s, table width: 2,100 mm, tank capacity: 8,000 l, pressure: 4,200 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, table height: 1,100 mm, operating pressure: 4,000 bar, warranty duration: 6 months, input current: 60 A, year of last overhaul: 2024, water pressure: 4 bar, compressed air connection: 7 bar, pump pressure: 4,200 bar, overall weight: 5,000 kg, input frequency: 50 Hz, power: 45 kW (61.18 HP), 3D waterjet cutting machine used by stone customer. Completely reconditioned in 2024 / 2025 ( still in progress ) by official CMS dealer. Pictures are before / during the overhaul, machine condition when delivered is like new ( last picture is an example of how we supply reconditioned machines ) Cutting head full 3D with 150 mm Z-axis range. Rotating axis range +/-274 degrees. Tilting axis +/- 62 degrees Fully 3D operated with intelligent Kerf Compensation ( IKC ) , no 2,5D head like most competitors We have been official CMS dealer since 13 years in the Benelux Rental / Lease / all in lease possible depending from geographical area. Electronic sand doseage with vacuum control 60HP Jetpower Evo pump with 3 cilinders, bringing 5 L/min at maximum 4200 bar ( L/min determine cutting speed, not the pressure ) Dodpfx Adjvdnn Esujwc The machine will be delivered fully reconditioned with official warranty. Off course with 100% technical performance. Installation and training possible.

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 15,971 h, laser hours: 15,971 h, laser power: 4,000 W, sheet thickness (max.): 8 mm, overall weight: 22,500 kg, Application by the end of 2024 - submission of bids obliges timely collection. Machine including special equipment and automation TECHNICAL DETAILS Working area: 2500 x 1250 mm Laser: TruFlow 4000 Laser power: 4000 W Punching Max. sheet thickness: 8 mm Max. Workpiece weight: 200 kg Max. Punching diameter: 76.2 mm Liner arm magazine: 22 tool positions with 3 clamping claws Punching force: 220 kN Parts flap: 500 x 500 mm Control system Control type: Rexroth IndraMotion MTX Positioning accuracy: 0.1 mm Operating data Operating hours: 80,968 / 81,053 / 15,971 h MACHINE DETAILS Length: 8070 mm (basic machine) Width: 8550 mm (basic machine) Height: 2730 mm (basic machine) Weight: 22,500 kg (basic machine) EQUIPMENT - Standard - Adjustment device with programmable hold-down device - Foot switch for closing clamps - Ball tables - 2 good parts containers - Chip container - Transport and assembly device - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - Liftable laser cutting support - LensLine - High-frequency excitation - Cooling unit - Laser control TASC 4 - Electro-hydraulic punching head - Tool length compensation - Adjustable hold-down force - Spray lubrication punch - Bulge detection - Level monitoring Thread forming and tool lubrication - Laser cutting head with 170 mm focal length - Universal cutting head quick-change device, UTI with bus connection - ControlLine - USB interface and RJ45 network connection - CE marking - Dual-beam light barriers - Protection against stray radiation - Compact dust extraction system EQUIPMENT - extended - TruFlow 4000 including LensLine - Active die - Spray lubrication die - MultiTool function - Thread forming function - Marking function - Engraving function - Rolling technology function - Adaptive stroke calibration - StripLine - Repositioning cylinder - Vibration-damped installation - Chip conveyor with container Dwsdpfx Adou Rbg Ejujc - Table extension - Special thin sheet machining - Brush tables - Blow-out device for small parts AUTOMATION SheetMaster 2500 x 1250 mm - Suction cup frame with 36 suction cups (y-axis = 400 mm) - Movable suction cup bars (v-axis = 120 mm) - Peeling suction cups - Suction cup plate module - Vacuum sensor system - Central lubrication - Sheet thickness gauge for double sheet control - Automatic clamp closing SheetMaster Loading and unloading parallel to production time Peeling system Unloading monitoring GripMaster 2500 x 1250 mm - Residual skeleton grippers with sensors - Residual skeleton pallet can be tilted ToolMaster with 40 stations Main time parallel set-up Trolley systems (2500 x 1250 mm on rails) Loading/unloading double trolley incl. storage interface Including 1 set of set-up cassettes with die plates (21 pieces)

Condition: used, Year of construction: 1981, functionality: unexamined, machine/vehicle number: 2172, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 300 m/min, table length: 1,120 mm, table width: 630 mm, total length: 2,760 mm, table height: 2,800 mm, total width: 3,306 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 1 m/min, drilling capacity: 30 mm, Dimensions of the working surfaces: - Maximum stroke of spindle - min.270mm - Spindle extension - 710mm - Distance from spindle end to working table - least 200mm greatest 750mm - Internal spindle cone acc.to GOST 15945-70 - metric 45 - Machine weight (without electrical equipment and accerssories) - 6890kg Table and skids: - Nr.of table slots - 7 - Securing the table and sleds - mechanical - Screen counting method - optic - Screen resolution value- 0,001mm Dwodpfx Adounrhaeuoc Spindle: - Boring capacity: 250mm - The accuracy of processing a given size at a feed rate no more than 150mm/min - 0,2mm - Force allowed by the feed mechanism - 600kgs - Spindle RPM limits (within two gears): 1st gear- 32-400 RPM, 2nd gear - 160-2000 RPM - Maximum vertical mechanical displacement - 330mm Extras: coilets, tool holders, other additional equipment, documentation for machine

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 1404, total width: 1,690 mm, total length: 3,410 mm, total height: 1,915 mm, overall weight: 3,000 kg, TECHNICAL DATA Capacity - Height of centres: 125/175mm - Distance between centers: 400mm; 700mm; 1025mm - Max.travel of longitudinal slide: 400mm; 700mm; 1025mm Table - Table speed steplessly adjustable: 0.5 - 5.5 m/min. - Reversal dwell of table: 0-6 sec. - Minimum automatic stroke approx.: 1.5mm - Maximum swivel of table: 400 deg.- 12 ; 700 deg. -10; 1025 deg.- 8 - Travel per revolution of handwheel: 25mm Workhead - Swivel towards grinding wheel: 90 deg. - Spindle speed, steplessly variable: 30 - 675 RPM - Spindle nose taper: Morse 5 - Collet shank diameter: 25mm Dsdpfxeupiyce Adujwc - Diameter of 3-jaw chuck: 160mm Wheelhead - Grinding wheel L.H. or R.H.: - Diameter (special exec. 6.25kW/8.4 HP): 400 (450) mm - Maximum width: 50 (80) mm - Bore: 127 (203) mm - Spindle speeds (3-step Vee-belt pulley) - Grinding wheel dia 400: 1500/1625/1800/2000/2200/2400 RPM - Grinding wheel dia 450 (8.4HP): 1340/1500/1625/1800/2000/2200 RPM - Grinding wheel motor approx.: 3kW - Grinding wheel motor, special for 450 dia wheel approx.: 6.25kW - Rapid travel of wheelhead: - Hydr.approach and retraction: 40 mm - Additional adjustment with hand leveler: 210 mm - Swivel of the whole cross slide L.H. and R.H.: 45 deg. - Interminent feed, steplessly adjustable (on dia) at left or right hand table reversal, or both: 0.001 - 0.05 mm/sec. - Plunge feed, steplessly adjustable (on dia): 0.0002 - 0.1 mm/sec. - Maximum depth of plunge on dia: 1.7 mm Motor rating - Wheel spindle, standard: 3 kW - Wheel spindle special rating: 6.25 kW - Workhead: 0.55 kW - Hydraulics: 0.55 kW - Coolant pump, standard: 0.17 kW - Coolant pump, inteclon: 1.1 kW Workpiece weight - Maximum between centers: 80 kg Extras: grinding wheels, coilets, other additional equipment, user manuals

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 70.0961.000.253, TECHNICAL DETAILS: Turning diameter: - Over bed: 800 mm Dwsdpfx Aoup A Rzeduec - Over carriage: 560 mm - Diamter of face plate: 750 mm Height of centers: - Over flat ways: 380 mm - Over Vee ways: 358 mm Gap, bed and gap piece: - Turning diameter in gap: 980 mm - Width of gap in front of face plate: 380 mm - Swing in gap: 1040 mm - Width of gap in front of face plate within swing diamter: 330 mm - Width of bed: 560 mm Headstock spindle: - Diameter of spindle bore: 90 mm - Spindle diamteres in front bearing: 145 mm - Taper in spindle: 6 Morse Spindle speeds: - Number: 18 - Spindle speed ranges: 7,1 - 355 RPM 9,0 - 450 RPM 11,2 - 560 RPM Power required: 7,5 - 14 kW Feeds: - Number: 32 - Sliding feeds per revolution: 32 longitudal feeds: 0,071 - 2,5 mm/rev. 32 cross feeds: 0,04 - 1,4 mm/rev. Extras: additional equipment, manuals for machine

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, table width: 420 mm, table length: 1,200 mm, spindle mount: MK 4, total height: 2,310 mm, total width: 1,900 mm, total length: 2,650 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, workpiece weight (max.): 405 kg, quill travel distance: 150 mm, power: 6 kW (8.16 HP), Equipment: rotational speed infinitely variable, Type control: Heidenhein 150 Dsdpfx Aeunhy Seduswc System resolution: 0,001 mm Documentation for machine

Condition: repair required (used), Year of construction: 1983, functionality: limited functionality, total height: 2,650 mm, total width: 3,640 mm, total length: 4,620 mm, overall weight: 6,800 kg, Technical details: X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 800 mm Dwodpfxsunwd To Adujc Rapid traverse: 6 m/min Working feed: 1- 400 mm/min. Rotary axis resolution (degrees): 0,001 Control unit: Philips 432 Spindle revolutions: 20-2000 RPM Spindle stroke: 125mm Spindle taper: ISO 50 Spindle power: 15kW Feed force axis X and Z: 8000N Feed force axis X and Z: 24000N Table size 1250 x 800 mm Table load: 800kg Programing resolution: 0,001mm Documentation for machine Note: Defect electronic card should be replaced. The machine is mechanicaly in excellent condition, and could easily be retrofitted with modern CNC controls.

Condition: used, Year of construction: 1983, functionality: unexamined, machine/vehicle number: 02.056.00, overall weight: 11,000 kg, space requirement length: 2,420 mm, space requirement width: 2,040 mm, space requirement height: 3,220 mm, TECHNICAL DATA: - Pressing force (infinitely variable): 1000 kN - Max.ejector force: 30 kN - Retraction force: 300 kN - Pressing speed: 8 mm/sec. - Rapid traverse: 48 mm/sec. - Opening speed: 44 mm/sec. - Retraction speed: 23 mm/sec. - Press travel (stroke): 600 mm - Spray nozzle stroke: 70mm - Max.spray volume: 5 dm3 - Surface Ram top: 1000 x 1200 mm - Surface Ram below: 998 x 1280 mm - Distance between columns: 1130 mm - Plane parallelism between upper and lower plate: +/- 0.1 to 600mm lenght with uniform load distribution - Maximum mould weight: 7000 kg - Load capacity of swivel plate: 3500 kg Djdpjupy Abjfx Adujwc - Power connected load: 30 kW - Motor power: 7.5 kW - Sprays pressure max-min.: 4 - 10 bar - Max.flow pressure: 190 bar - Return pressure: 190 bar - Air comsumption injection: 20 - 50 Ndm3 - Tank: 140 l

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: F310Y, total height: 3,210 mm, total length: 4,640 mm, total width: 3,340 mm, Technical details: - Spindle diameter (axially fixed): 120mm - Variable spindle speeds: Range 1 - 10 to 465 RPM, Range 2 - 45 to 2150 RPM Dwjdsun Siwjpfx Aduoc - Nominal power at the spindle: 8kW (temporary overload permissible up to 11kW) - Nominal torque at the spindle: 98 kpm (temporary overload permissible up to 134kmp) - Max absorbed power: 25kW - Dimensions of the standard tableL 840 x 1000mm - Max recommended load: 1200kg - Table rotation in both directions: continious through 360 degrees - Transverse stroke of the table (X axis): 900 (+20) mm - Longitudinal stroke of the table (Z axis): standard Z - 760 (+20)mm, increased Z - 975mm (+20 outside the graduation) - Min.and max. distance spindle flange/table centre (without spindle adaptor): standard Z - 430/1190 (+20)mm, increased Z - 455/1430 mm (+20 outside the graduation) - Vertical stroke of the headstock (Y axis), min. and max. height of the spindle axis above the table: standard Y - 50-710 (+20)mm, increased Y - 50-960 (+20)mm - Hydraulic infinitely variable working feeds in manual mode - 6 to 630mm/min - Rapid traverse - 6m/min - Precision of optical reading: linear axes - 0,001mm, manual rotary axis - 1 sec.arc - Positioning accuracy refered to built-in master scales +/- 0.0015mm; +/- 2 sec.arc - Weight of the machine: 12 t Extras: Includes various tool holders, rotating table, user manuals