Used Messersi Tch 1500 for sale (22,983)

Year of construction: 2009, condition: ready for operation (used), Screw diameter: 40mm, screw stroke: 160mm, displacement volume: 201cm³, shot weight: 184g, injection pressure: 2000bar, shot volume: 168cm³, clamping force: 1500kN, opening force: 350kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, tie bar distance: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, weight: approx. 5000kg, operating hours: approx. 60000h. Documentation available. An on site inspection is possible. Itedpfxjx E Ac Ss Affjr

Condition: used, New: No Empty weight: 255 kg Isdpfx Afox Au I Eefjtr Dimensions (LxBxH): 100 x 120 x 185 cm Cargo space capacity: 1.540 l VAT/margin: VAT qualifying -Inox parallepipedique 1544 litres Tare 255 kg / epreuve 0,65 bar Palettisable et gerbable Trappe superieure diamètre 450 mm hermetique Vidange d.50 Agréé transport Encombrement : 1000 x 1200 x ht 1850

Condition: ready for operation (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, turning length: 1,540 mm, travel distance X-axis: 495 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,560 mm, swing diameter over bed slide: 660 mm, controller model: MSX-711 (MAPPS IV), Partially overhauled machine with only approximately 3,000 spindle hours! TECHNICAL DETAILS Turning length: 1,540 mm Max. turning diameter: 610 mm (Turret 2: 274 mm) Swing diameter over bed: 660 mm Swing diameter over cross slide: 660 mm (Turret 2: 300 mm) Turning/Milling Spindle X-axis travel: 495 mm Y-axis travel: 125 mm Z-axis travel: 1,560 mm B-axis: 120 degrees Spindle speed: 12,000 rpm Drive power: 18.5/11 kW (10 min./continuous operation) Tool Magazine Magazine positions: 76 Tool holder: Capto C6 Lower Turret Number of tool stations: 10 Tool change time: 0.19 s Main Spindle Spindle speed: 5,000 rpm Main spindle drive power: 22/18.5 kW (30 min./continuous operation) Sub Spindle Spindle speed: 5,000 rpm Sub spindle drive power: 22/18.5 kW (30 min./continuous operation) Isdex An Uxopfx Affotr MACHINE DETAILS Control system: MSX-711 (MAPPS IV) Operating hours Spindle hours: 3,006 h Operating hours: 4,526 h EQUIPMENT Spindle 2 with tailstock option Electronic handwheel Interface for high-pressure coolant system Chip conveyor Air nozzle for chuck and tool tip Automatic tool measurement system for upper and lower positions Bar feeder interface Hobbing function

Condition: like new (used), Optical glass sorting machine, virtually new demonstration machine. Vibratory feed hopper included Belt width: 1500 MM Sorting grain size: 5-50 MM Itsdpfx Afovdqh Iefor Worn parts will be fully operative Software will be upgrated to letest version

Condition: like new (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, film width: 1,640 mm, pressure: 6 bar, total width: 5,406 mm, total length: 6,840 mm, total height: 3,808 mm, heating capacity: 9 kW (12.24 HP), pump capacity: 60 l/min, + 2x pressurized water units up to 95°C, for table-mounted tools; 60 l/min pump capacity, 6.3 kW cooling capacity, 9 kW heating capacity + Automatic heating control + Fully automatic central lubrication + Loading machine, standard right position + Ejector device for molded parts + Fully automatic central lubrication BSM Isdpfx Aexmwl Ijffetr + 2 component magazines + Cooling system with floor-mounted central blower and 6 adjustable air nozzles + Hardware interface for external device

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 410798, type of input current: three-phase, The Kraft VPS100/1500 is a high-precision, fully automatic carton cutting machine designed for flexible and efficient production of shipping and protective packaging from continuous corrugated board – ideal for companies with a wide range of small batch series or on-demand production. Its patented multi-tool system allows for creasing, perforating, and cutting in a single pass, both longitudinally via the processing roller and transversely via the integrated cutting bar. 🎛 Processing & Tools 6× multifunction tools for longitudinal processing 1× multifunction tool for transversal processing Creases are applied gently using creasing skids – reduces carton cracking Perforation via oscillating cutting knife, intensity adjustable Cutting with a serrated knife on a rubberized roller → low-fiber, tactile cut edge ⚙ Drive & Mechanics Maintenance-free, high-dynamic linear drives for precise feed Segmented top pressure for reliable carton feed 2 rubberized rollers as counter-cut and transport medium 📐 Technical Specifications Max. working width: 1,500 mm Min. working length: 380 mm Board thickness: min. 1.5 mm (E-flute 1.3) max. 7.0 mm (BC-flute 2.7) Tool width: approx. 45 mm ➕ Carton Feed (Feed Stand) Max. stack height: 2,100 mm + 120 mm pallet Max. feed rate: 100 m/min Min. web width: 300 mm Max. web width (VPS 1500): 1,500 mm Total width "side by side": max. 1,350 mm 💻 Control & Software Hardware BECKHOFF industrial PC C6930 (Intel® Core™ i5-7500T, 2.7 GHz, 4 cores) 16 GB RAM, 240 GB SSD Windows 10 IoT Enterprise 21" multi-touch panel Control cabinet integrated into base machine Software features Multi-stage cut optimization Dynamic tool management Bidirectional multi-line processing User management (user, service, admin, Kraft) Comprehensive production, carton, and design management Message statistics, manufacturer documentation, training videos, service portal, etc. Documentation Operating manual in local language Circuit diagrams in German or English Spare parts drawings Other Equipment Standard interface for barcode scanner, file import (XML), database import Control panel mounted on swing arm, left side 🔄 Setup Times & Performance Changeover time with automatic carton changer: approx. 4.5 seconds Tool repositioning only: approx. 2.5 seconds The machine is delivered with multiple FEFCO formats and is production-ready immediately (e.g. 0201, 0331, 0403, 0410, 0412, 0421, 0401 incl. perforation) 🚚 Assembly, Transport & Year of Manufacture Demo and test machine year of manufacture 2019 Single-shift operation since 2022 Dismantling, packaging and delivery handled by seller Unloading requires 3.5-ton forklift with long forks 🎨 Colour Scheme Base machine: RAL 7015 (Slate Grey) & RAL 7035 (Light Grey) Safety fence: RAL 7015 Safety fence posts: RAL 7035 Iedpfxex Emgue Affotr 💡 Key Advantages of this Machine Very short setup times → ideal for flexible packaging production Low-fiber cut edges → reduced risk of injury & improved appearance Intuitive user interface Fully automatic, high-precision operation Immediately ready for use with included design templates Low-maintenance linear drives High process stability due to segmented top pressure

Condition: ready for operation (used), Vibratory finishing system, Slide Grinding Machine,Circular trough vibratory finishing machine, Used Machine Manufacturer: Gránit-Ex Kft Type: FM-10, 1500 x 1500 Year: 2020 Weight: 600 kg d: 550 mm, Circumference: 1670 mm D: 1350 mm, Circumference: 3650 mm Ijdpexdfabjfx Affjtr Torus: 350 mm

Year of construction: 2000, condition: used, Manufacturer : Dumoulin Model : TD 1500 Itjdpjx Auuxjfx Affor Year: 2000 Type: coating machine Classification: ATEX motorisation and sensors Operating unit: from 4 to 15 kg of mass to be impregnated. Coater type: solid drum for impregnation Turbine diameter: Ø 600 mm Turbine depth: 400 mm Removable mixing blades Materials: 304 L stainless steel Unloading: automatic by reversing the rotation of the cylinder Driven by 0.37 kW geared motor, electronic variable speed drive from 2 to 25 rpm. T°C recorder Timer Rotor speed indicator Ventilation unit integrated into the frame : 1 x EU 13 air filter (absolute filter) 1 x 0.37 kW electric fan 1 x ADF electric heater (heating element) 1500 W with temperature regulator (sensor) 1 x stainless steel nozzle and blower in the drum      

Condition: used, Year of construction: 2014, total width: 2,500 mm, total length: 5,000 mm, total height: 2,500 mm, Empty weight: 2.500 kg Price: On request Itjdpfxowrr Hts Affjr Filter-area: 228m2 Capacity: 15.000 m3/h - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 22653 - Control type: Herding MP 12 - Control: CNC - Motor power: 55.0kW - Transport dimensions: 5000mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 6 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2020, operating hours: 4,930 h, functionality: fully functional, machine/vehicle number: 510-3888, rotor diameter: 370 mm, number of blades: 82, power: 75 kW (101.97 HP), WEIMA WLK 1500 / 75 kW V-Rotor Industrial Shredder Suitable for Paper, Wood, Plastic, Metal (Swarf), Textiles and General Waste Processing Summary Heavy-duty WEIMA WLK 1500 industrial shredder with a 75 kW V-Rotor, suitable for continuous processing across multiple waste streams including paper and cardboard, wood and biomass, plastics, metal swarf, textiles, and general waste reduction. The machine is supplied complete with its associated extraction unit. Key Specifications • Manufacturer: WEIMA • Model: WLK 1500 • Rotor Type: V-Rotor • Installed Power: 75 kW • Cutting Chamber: 1500 mm working width • Material Suitability: Paper, cardboard, wood, plastics, metal swarf, textiles, mixed waste • Feed: Conveyor-compatible • Running Hours: 4,930 hours • Condition: Operational and available for inspection Included with the Machine • New, unused replacement blade set • Dedicated extraction unit (multi-port extraction with collection bags, as shown in photos) Inspection and Condition This machine was originally purchased from Fercell. A recent inspection by Fercell identified several maintenance and condition items, which have been fully considered within the selling price. Inspection Findings • Hydraulic hose leaking • Screen door switch damaged • Screen door handle missing • Screen doors modified for reverse Ram operation (recommended to return to factory specification) • Control panel isolator switch damaged (replacement recommended – panel currently remains live/on) • Hopper dog box damaged (replace if required) • Rear hydraulic door – two damaged threads requiring repair • Hydraulic oil low due to hydraulic hose leakage (full service and oil top-up recommended) Full inspection notes can be provided to interested buyers. Applications • Paper and cardboard recycling • Wood recycling and biomass preparation Isdpex Eklnefx Affjtr • Plastic recycling and re-processing • Metal swarf reduction • Textile destruction and processing • General waste management and volume reduction Condition and Viewing • Operational condition • Available immediately • Available for inspection by prior arrangement Decommissioning and Removal Buyer to arrange full decommissioning, disconnection, dismantling, lifting and removal of the equipment. Seller will provide reasonable site access for inspection and collection. Additional Items Available (separate cost) Outfeed Incline Conveyor (1.75 kW) – Heavy-Line PVC Belt “L-Type” Conveyor Industrial conveyor transferring shredded material from the shredder to the extraction system. Key Features: • Durable PVC belt • L-shaped elevation design • Steel frame • Adjustable discharge height Price: £9,000 Screen Insert – WEIMA WLK 1500 (30 mm, t = 10 mm) Spare classification screen for controlling shred size from the WLK1500 shredder. Key Features: • 30 mm hole pattern • 10 mm heavy-gauge steel • Improves consistency of final product • Quick installation Price: £1,000 Pricing • WEIMA WLK 1500 Shredder with extraction unit: £55,000 (€62,960) • Outfeed Incline Conveyor (optional): £9,000 (€10,300) • Screen Insert (optional): £1,000 (€1,445) Reason for Sale Business closure. Location Haverhill, CB9 8QP, United Kingdom

Condition: used, mileage: 329,319 km, power: 162 kW (220.26 HP), first registration: 04/2014, fuel type: diesel, empty load weight: 6,180 kg, maximum load weight: 5,810 kg, overall weight: 11,990 kg, axle configuration: 4x2, wheelbase: 5,400 mm, next inspection (TÜV): 11/2025, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 7,100 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, cabin, central locking, compressed air brake, differential lock, immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, spoiler, tail-lift, traction control, * German vehicle * 1st owner * Full service history (dealer maintained) * Condition as shown in photos * Body: Tarpaulin frame with sliding curtain left side * Loading platform: Length 7,100 mm x Width 2,450 mm x Height 2,300 mm * Aluminum loading flaps * Central stanchions * Wooden floor * Dautel tail lift * Type: DL 1500L * Load capacity: 1,500 kg * Foot switch * Roll-off protection * Cab with 2 seats * Air conditioning * Multifunction steering wheel * Cruise control * Comfort driver’s seat, air-suspended * Seat heating * Air suspension raise/lower * ABS and ASR * Roof hatch * Electric windows * Electrically adjustable, heated mirrors * Manual transmission * Central locking with remote * Differential lock * Spoiler * Hands-free system * Daytime running lights * Sun visor * Wheelbase: 5,400 mm * Gross vehicle weight: 11,990 kg * Curb weight: 6,180 kg * Payload: 5,810 kg Itodpfoxtfx Nex Affsr If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and highly recommend viewing and inspecting the goods to avoid any misconceptions about the condition and suitability. Viewing and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 172459, center width: 1,500 mm, spindle bore: 105 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over bed slide: 660 mm, turning diameter over cross slide: 900 mm, overall weight: 2,800 kg, total height: 1,600 mm, total length: 3,210 mm, total width: 1,230 mm, feed length X-axis: 368 mm, We purchased the lathe at the end of January 2024, but due to the current order situation, it has not been put into operation. We are now looking to sell it as part of our business closure. The machine’s accessories can be seen below. Working Area Workpiece length: 1,500 mm Swing diameter over bed: 660 mm Swing diameter over cross slide: 440 mm Swing diameter without gap bridge: 900 mm Gap bridge length: 320 mm Bed width: 400 mm Main Spindle Spindle speed: 25 rpm – 1,600 rpm Spindle bore: 105 mm Iodpfjx Dy T Aox Affjtr Spindle mount: D1-8 Spindle taper: Ø 113 mm / 1:20 Rapid Traverse Rapid traverse X-axis: 2,000 mm/min Rapid traverse Z-axis: 4,000 mm/min Feed Feed rate X-axis: 0.022 mm/rev – 0.74 mm/rev Feed rate Z-axis: 0.044 mm/rev – 1.48 mm/rev Thread Cutting Metric threads: 0.45 mm – 120 mm Diametral pitch: 0.88 DP – 160 DP Module threads: 0.25 mm – 60 mm Whitworth threads: (54) 7/16 – 80 TPI Tailstock Quill diameter: 90 mm Tailstock taper: MT 5 Quill stroke: 235 mm Tailstock offset: ±12.5 mm Drive Main drive motor power: 7.5 kW Dimensions and Weight Dimensions (L x W x H): 3.21 m x 1.23 m x 1.6 m Weight: 2,800 kg

Condition: excellent (used), color: blue, lifting height: 30,000 mm, Year of construction: 2020, operating hours: 482 h, Drivetrain Drive: Wheel Make of engine: Honda Weights Empty weight: 3.500 kg Functional CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Itodpfx Ajxz E Hcjffer Delivery terms: EXW Production country: DE Additional information Please contact Michael Overmeer for more information Böcker AHK 30/1500 trailer crane construction year 2020 with only 482 hours from the first owner. Machine is like new (has always been stored indoors) and has among other things: Honda petrol engine, wheel drive, hydraulically support legs, hydraulic jip, remote control. Changes and typographical errors reserved.

Condition: excellent (used), Year of construction: 2009, Arburg 470C 1500-400 Year of manufacture: July 2009 Injection unit: Itodoxz Abwjpfx Affer Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cc Clamping unit: Clamping force: 150 t Type distance: 470 x 470 mm Clamping platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Core pull control Injection unit hardened - bimetal Screw diameter can be changed Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pumps/Motor: 18.5 kW Heating power: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2003, Netstal S-1500-460 (2003) Clamping force - 150 t Screw diameter - 45 mm Hours - 79.000 Distance between tie‑bars (tie bar spacing): 460 × 460 mm Mold platens size (fixed / moving platen): 757 × 757 mm Opening stroke (mold opening stroke): 450 mm Min. mould height: 250 mm Max. mould height: ≈ 550 mm Max. daylight (max open platen distance): sometimes specified high (depending on configuration) Injection / Plasticizing Unit: Screw (barrel) diameter: 40 mm in common version. Itsdpowkg Txjfx Affjr Shot volume (max): ≈ 201 cm³ Shot (weight) for PS: often around ~193 g (depending on material) Injection pressure: varies by configuration (some data sources mention around 1750 bar or more) Machine Dimensions & Weight: 10 400 kg

Condition: reconditioned (used), -Drilling diameter 5~25 mm -Drilling depth 1500 mm -Tailstock -Tank -pump -Filter Isdpfxohuil Rj Affotr

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Caterpillar C32, General information Field of application: Construction Weights Empty weight: 11.481 kg Functional Generator capacity: 1.500 kVA CE mark: yes Iodpox Dqnkefx Affotr Other information Fuel consumption: 232.8 Liter / Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 6,669x2,45x2,789 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information RATING TYPE STANDBY: Output available with varying load for the duration of the interruption of the normal source power. Average power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year.

Condition: used, mileage: 9,404 km, power: 110 kW (149.56 HP), first registration: 06/1985, fuel type: diesel, axle configuration: 4x4, wheelbase: 2,650 mm, color: green, gearing type: mechanical, Year of construction: 1985, Equipment: all wheel drive, Number of cylinders: 6 Engine displacement: 5,675 cc Iedpfjvdq I Ijx Affjtr Curb weight: 6,095 kg Dimensions (L x W): 475 x 250 cm Interior: Black Number of keys: 1

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. Itjdjx Dmdhspfx Affor • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow

Condition: excellent (used), Year of construction: 2009, Arburg 470C 1500-400 Year of manufacture: July 2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cc Clamping unit: Clamping force: 150 t Type distance: 470 x 470 mm Clamping platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Itodpfx Afsxz Abqofer Additional equipment: Core pull control Injection unit hardened - bimetal Screw diameter can be changed Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pumps/Motor: 18.5 kW Heating power: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: used, Year of construction: 2003, grinding wheel diameter: 400 mm, helix angle: 45 °, wheel diameter: 1,500 mm, Used Höfler Rapid 1500, built in 2003 Mahr measuring system Interlit oil preparation system Itedpfxsv U D Tfj Affor Location: Australia

Condition: excellent (used), Year of construction: 2008, Arburg 470C 1500-400 with the Wittmann W711 robot Year of construction: 2008 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Metering volume: 254 ccm Clamping unit: Clamping force: 150 t Distance between tie bars: 470x470 mm Size of the clamping platens: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Euromap 67 Itjdpfsxz Abdjx Affjr Robot interface Air valve x 1 Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Robot Wittmann W711 Year of construction: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Travel in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 4900 kg Length/width/height: 4.44x1.63x2.09 m Drive: Pump/motor: 18.5 kW Heating output: 9.7 kW Total output: 28.2 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Arburg 470C 1500-675 Year of manufacture: 2004 Injection unit: Screw diameter: 60 mm Injection weight: 427 g Injection pressure: 1440 bar Metering volume: 508 ccm Clamping unit: clamping force: 150 t tie bar distance: 470x470 mm Itjdpfxoxz Aaye Affor size of clamping platens: 685x685 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Core pull control Injection unit hardened - bimetal Parallel movements Dimensions: Weight: 4660 kg Length/width/height: 5.00x1.93x2.22 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2006, Arburg 470C 1500-400 with robot Wittmann W721 Year of manufacture: 12.2006 Injection unit: Screw diameter: 40 mm injection weight: 184 g Injection pressure: 2000 bar Metering volume: 201 ccm Clamping unit: clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Itsdpfx Aexz Aatjffjr Injection unit hardened - bimetal Built-in conveyor belt and sorting flap Robot Wittmann W721 Year of manufacture: 2006 4-axis robot: 3 axes are driven by servo motors (electric); axis C - pneumatic Travels in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot for an additional charge Dimensions: Weight: 4900 kg Length/width/height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating power: 10,2 kW Total power: 28,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2005, Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of manufacture: 2005 injection unit: screw diameter: 25 mm injection weight: 49 g Injection pressure: 2500 bar Metering volume: 54 ccm Clamping unit : clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 685x685 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: 2K machine Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Itjdjxz Aagjpfx Affer Parallel movements The vertical injection unit - screw diameter fi 25 mm (49 g/hp) It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer: 30, 35 mm Dimensions: Weight: 5700 kg Drive: Pumps/motor: 30 kW Heating power: 2 x 9,4 kW Total power: 48,8 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request