Used Mep Tiger 350 for sale (136)

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t Hjdsfg Rlcspfx An Aol dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Hsdpfx Ajfm T Hbjn Ael Price on request.

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Hjdpfx Ajfg E Hzen Asl Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 11900715/C, saw blade diameter: 350 mm, feed length X-axis: 180 mm, feed length Z-axis: 170 mm, total length: 2,210 mm, total width: 1,100 mm, total height: 1,550 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 120 mm, type of input current: three-phase, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, cutting height (max.): 170 mm, overall weight: 530 kg, saw blade speed: 90 rpm, input voltage: 400 V, cutting range square steel at 45°: 100 mm, cutting range square steel at 90°: 105 mm, saw drive: 2,200 W, cutting diameter: 120 mm, saw blade bore: 32 mm, 2000 MEP Cobra 350AX Automatic Circular Cold Saw – Efficient Metal Cutting for Industrial Production Available now: MEP Cobra 350AX, a robust automatic cut-off circular saw, perfect for industrial metal cutting applications. Manufactured in 2000 and in good working condition, this machine combines manual and automatic operation modes, adjustable cutting settings, and a 350mm blade to deliver consistent, high-quality cuts. 🔧 Key Features: Blade Size: 350 × 32 × 2.5mm Spindle Motor Power: 2.2kW Blade Speeds: 15 / 30 / 45 / 90 rpm Vice Opening: 160mm Clamping Type: Pneumatic Power Supply: 400V / 3 Phase / 50Hz Manual & Automatic Modes: Yes Cutting Depth & Stop Height: Fully adjustable Machine Weight: 530kg Dimensions (L×W×H): 2210 × 1100 × 1550mm 📏 Cutting Capacities: At 0°: Round: 120mm Rectangular: 180 × 170mm Square: 105 × 105mm At 45° Left: Round: 120mm Rectangular: 135 × 60mm Square: 100 × 100mm Hedpfx Aowtr Iyon Ael At 45° Right: Round: 110mm Rectangular: 135 × 60mm Square: 95 × 95mm ⚙️ Ideal Applications: Cutting steel profiles, tubes, bars Suitable for light to medium-duty industrial production Great for fabrication shops, stockholders, and manufacturing plants ✅ Why Choose the MEP Cobra 350AX? Versatile cutting angles and profiles Dual operation mode (automatic/manual) Compact, efficient, and easy to integrate into existing workflows Pneumatic clamping ensures safety and consistency Low investment cost means big savings on a high-value machine MEP Cobra 350AX for sale Used automatic circular saw Cold saw for metal cutting Pneumatic clamping cold saw 350mm circular saw machine Industrial metal cut-off saw MEP saw 2000 model Automatic metal saw Ireland Circular saw for steel profiles 400V industrial cold saw Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), functionality: fully functional, Blade inclination -45° / +45°. Maximum vise opening 180 mm Maximum non-feedable length 385 mm Disc size 350 mm Blade rotation speed 1700 / 3400 rpm - 2 speeds Hjdpfx Anex Hw Sqe Ael

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm Hodpfx Anjy Hu H Es Asl -Saw blade speed: 2x speeds -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg

Condition: used, total height: 1,750 mm, total length: 1,900 mm, total width: 1,200 mm, Empty weight: 500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Mitre cutting available: Yes - Round cutting capacity [mm]: 260 - Power [kW]: 1.5 - Saw blade length [mm]: 3150 - Saw blade width [mm]: 25.4 - Saw blade thickness [mm]: 0.9 - Saw speed [m/min]: 72 - Options: Digital readout - Transport dimensions: 1900mm x 1200mm x 1750mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Hedoy E Shwopfx An Ajl VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2013, functionality: limited functionality, cutting height (max.): 230 mm, cutting width (max.): 245 mm, total height: 1,680 mm, total width: 1,950 mm, overall weight: 1,000 kg, empty load weight: 1,000 kg, feed length Y-axis: 500 mm, saw band length: 2,950 mm, saw band width: 27 mm, section length (max.): 9,999 mm, space requirement height: 2,100 mm, space requirement length: 2,900 mm, space requirement width: 1,950 mm, table length: 2,800 mm, table width: 245 mm, working height: 890 mm, Further technical details can be found in the operation and maintenance manual, which will be provided upon sale. If you have any further questions, please feel free to contact us by phone or email. Best regards, Hedpfx Anex Dirzs Ajl Weber Geländersysteme

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Hodpfxsfg E H Te An Aol Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW weight of the machine ca. 0,210 t dimensions 0,9 x 1,4 x 1,4 m Manual circular saw machine for sawing aluminum, miter cuts 45° right to 45° left and saw head can be swiveled 0° to 45° to the left. At the Cobra 352 MA (automatic vice) the vices close automatically when the saw head is lowered. •Roller-bearing rotary table for quick and precise miter adjustment •Screw lock to lock the saw head in any angle position •Automatic saw blade lubrication •Clamping system consisting of two vices •Saw head locking in the upper position •Adjustable length stop for cuts of the same length •Vice opening 180 mm Hjdpfx Asfc T Ufon Asl

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Hjdpfsfg E H Usx An Asl Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. Hsdpjfg E Hyjfx An Ajl - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm Hedpfx Anefmck He Aol capacity 45 degrees: round 100 mm capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm clamping range 130 mm turning speeds 30 / 60 U/min dimensions of saw-blade 350 x 32 x 2,5 mm total power requirement 1,1 / 2,2 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Aktionspreis 2026 Inkl. base frame !!! Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Vice with adjustable guide bars Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Safety main switch Emergency stop button Speed switch Electric coolant pump for lubrication and cooling of the saw blade (attachment a micro spray device possible) Motor 1.5/1.8 kW - 400 volts

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Hjdpfx Ajfg E H Eon Aol Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts Hodpfx Aefg E H Sen Asl * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. Hjdpfxofg E Iao An Ajl 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.)

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Hodpfxjfg E H Ij An Asl Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm Hedpefg E H Rofx An Ael capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: good (used), Year of construction: 2019, machine/vehicle number: 562670-08-C, Offer 25488 Technical Data: Hodpoy E Hv Aofx An Ajl - Band saw blade dimensions: 3320 x 27.0 x 0.9 mm - Infinitely variable cutting speeds: 15 – 100 m/min - Hydraulic material vice - Mitre adjustable left up to 60°, right up to 45° - Cutting capacity at 90°: - Round: 280 mm - Square: 260 mm - Flat: 330 x 260 mm - Cutting capacity at 45° left & right: - Round: 250 mm - 45° left, flat: 270 x 200 mm - 60° left, flat: 170 x 170 mm - Drive: 400 V / 2.2 kW - Coolant system - Chip brush - Weight: approx. 1300 kg - Space requirement: approx. W 1800 x H 1900 x D 1950 mm

Condition: new, dimensions of saw-blade 350x32x4 mm vice 180 mm 1700/3400 U/min capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm Hedpfx Anjy Dh Nno Ajl capacity 45 degrees: square 100/95 mm capacity 45 degrees: flat 135x60 mm output 2,2 kw weight 225 kg

Condition: good (used), Year of construction: 2011, functionality: limited functionality, power: 1.93 kW (2.62 HP), input voltage: 400 V, cutting height (max.): 250 mm, overall weight: 370 kg, Equipment: CE marking, Brand: MEP Model: Shark 281 Year of manufacture: 2011 Hedpfxey A Ir Ts An Asl Serial number: 041593 Power (kW): 1.93 Voltage: 400 V Frequency (Hz): 50 Dimensions LxWxH (mm): 1600 x 800 x 2050 (excluding conveyors) Weight (kg) approx.: 370 (excluding conveyors) Stock quantity: 1 Manufactured in: Italy Cutting capacity (mm): 250 round / 230 square / 280 x 200 rectangular Comments: Fair used machine, ready to use.

Condition: good (used), Year of construction: 1997, Used bandsaw by MEP Hodpfx Anoy A Ecce Ajl Model: Shark 260 Capacity: 260 x 210 mm Includes 2 feeders

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min Hsdpfx Aoxabavon Ael automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the start of the cut position - Manually operated band tension control with indication on the display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed

Condition: new, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2 mm cutting diameter minimum 5 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MPE CNC total power requirement 2,2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left Hjdpfx Ansxaa Ewo Ael - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: used, Year of construction: 2009, Large, robust saw from the renowned manufacturer MEP SHARK CCS HYDRA - Fully semi-automatic - Cutting diameter for round stock: 300 mm - Capacity: 320x260 mm - Swivel LEFT/RIGHT - Saw band: 3320x27x0.9 mm - Coolant pump - Automatic vise pressure Hjdpfxey Ani Ee An Asl - Machine weight: 700 kg - Original roller table (100 kg) - Includes 3 new saw bands - Original documentation The machine is original, in very good technical condition, ready for operation. Can be viewed in Głosków near Warsaw.