Used Measuring Tools for sale (40,339)

Condition: ready for operation (used), T&S ConturoMatic T2 Contour Measuring Device Optical-incremental measuring system Measuring speed 0.1...3.0 mm/s Nodpfx Aewak Nvjh Hewb Positioning speed up to 25 mm/s Measuring point spacing 0.5...25 µm Accuracy ±(0.9+L(mm)/100) µm Radius accuracy ±0.005% of the nominal value at R 12.5 mm Distance accuracy ±(1.2+L(mm)/100) µm Angle accuracy ≤ 30'' Technical data has been adopted. You are welcome to visit us for a viewing. We would be happy to arrange a cost-effective shipping service for you. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: used, x-travel 300 mm y-travel 275 mm z-travel 200 mm spindle tunring speed 40 - 2.000 U/min Nodpfox Uru Aox Ah Hjwb tool taper ISO 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Stud welding machine with shielding gas and lift ignition HBS Type ARC 804 Serial No. 610652 Welding current up to 800 A at 5% duty cycle Welding voltage 30 V Open circuit voltage U0: 95 V Maximum stud diameter 10 mm Rated power 15 kVA Power supply 400 Volt, 50 Hz, 32 A plug Rated current 27 A - Welding current adjustable in 4 steps - Continuously variable welding time setting - Shielding gas connection with continuously adjustable time - Welding gun with lift ignition PMH70 - Hose package length 4.5 m - Ground cable with two leads and two ground clamps - Digital display for current welding time in ms Nwedox Urcaepfx Ah Heb - Indicator lights for external conductor failure (phase failure) - At maximum stud diameter, approx. 3 studs per minute - 1 piece stud holder Ø 8 mm (fitted), 1 piece stud holder Ø 10 mm, 1 support tube - Mobile on transport trolley - Approx. 20 kg welding studs M8 and M10 in steel and stainless steel, including 12 kg M8 x 25 in stainless steel Required space (L x W x H) 500 x 325 x 305 mm Weight of welding machine 60 kg Total weight with transport trolley 145 kg Good condition

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns, with 4-digit code -Mounting: Bolt Ø 38 mm -Die stamp: see photos Njdpehb N Atjfx Ah Hjwb -Dimensions: 450/265/H305 mm -Weight: 94 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: TN52120936-08, total width: 1,000 mm, total length: 1,700 mm, total height: 1,800 mm, overall weight: 700 kg, TESA TESASCAN 52 length measuring device - Measuring range up to approx. 300 mm Attention: The item must be collected between 18 and 26 February 2026 on a binding, to-be-agreed date. Nwsdpjx T Anqjfx Ah Hob FCA D-78087 Mönchweiler – loaded onto truck

Condition: ready for operation (used), MAHR Digimar 816 CL Height measuring device Measuring device Measuring device: Measuring range: 350mm Space requirement measuring device: 350mm x 280mm x 730mm Nedpfx Aevbf I Doh Hswb further technical data see picture no. 2 Measuring plate: Dimensions: 630mm x 400mm x 70mm ( L x W x H ) Degree of accuracy: DIN 876/1 Perm. deviation: 0,016mm Actual deviation: 0.00505mm You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: ready for operation (used), MAHR Digimar 816 CL Height measuring device Measuring device Measuring device: Measuring range: 350mm Space requirement measuring device: 350mm x 280mm x 730mm further technical data see picture no. 2 Measuring plate: Dimensions: 630mm x 400mm x 70mm ( L x W x H ) Nsdpfxovbbr Ss Ah Hswb Degree of accuracy: DIN 876/1 Perm. deviation: 0,016mm Actual deviation: 0.00465mm You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2412306110, total height: 500 mm, total length: 800 mm, type of input current: three-phase, overall weight: 50 kg, power: 0.15 kW (0.20 HP), input voltage: 230 V, warranty duration: 12 months, control voltage: 230 V, volume flow: 600 m³/h, Electrostatic filter for oil or emulsion Nsdpfeybbrcex Ah Hewb

Condition: used, Geldmacher MST / Deckel FP4M Milling Machine, Tool Milling Machine Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions: Reference value: approx. 2,500 × 2,700 × 2,100 mm (Length × Depth × Height) Travels: X-axis: approx. 500 mm Njdpfxexcldks Ah Hjwb Y-axis: approx. 400 mm Z-axis: approx. 400 mm Spindle taper / Tool holder: SK 40 Quill stroke: Vertical quill: approx. 90 mm travel; additionally, the vertical milling head is movable on the spindle head Spindle speed range: Approx. 50 - 2,500 rpm Feed rates: Feed: approx. 8 - 630 mm/min; Rapid traverse (max. feed rate): approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange an inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, we can issue a net invoice (VAT-free) provided you supply a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. The stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data as well as mistakes in the article description may occur and are subject to change.

Condition: used, Formosatool Power Shrinking Device, Tool Shrinking Device Nsdpfeybbndsx Ah Howb Rated Power: 4 kW 230 V 16 A You are welcome to arrange a viewing. We are happy to organize affordable shipping for you. You will receive a proper invoice. For foreign customers, a net invoice can be issued, provided you supply a valid VAT Identification Number. Subject to prior sale. Visit our shop and have a look at our other offers as well. The specified company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data or errors in the item description may occur and are subject to change.

Condition: used, Optacom VC-10 Universal Measuring System Surface Roughness Tester / Contour Measuring Device Device is sold without PC and software (hardware only). Resolution in X and Z axes: 0.002 µm Resolution at the probe tip: 0.003 µm VC-10 measuring range horizontal/vertical (X-axis/Z-axis): 225 mm Measuring system: optical, incremental, and non-contact in all axes (X, Z, T) Accuracy: +/- (0.5 + L/100) µm Maximum measuring force: 10 - 150 mN Measuring speed: 0.1 – 2 mm/sec (automatically optimized) Probe tip radius: 0.002 – 1 mm Measurable slopes: 78° upwards; 87° downwards VC-10 dimensions (W x D x H): 950 x 380 x 725 mm VC-10 weight (approx.): 150 kg Nodpfxeybbd Se Ah Hewb Description has been adopted as provided. You are welcome to arrange an on-site inspection. Upon request, we can organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: good (used), Year of construction: 2007, machine/vehicle number: 21207004, Offer 25434 Technical Data: - Working area of the axes - X (longitudinal) / Y (transverse) / Z (vertical): 750 / 380 / 380 mm - Table dimensions: 1300 x 300 mm Nwodpex Dl Hhjfx Ah Hob - Tool holder: ISO 40 - Automatic quill feed - Quill stroke - Tapping device: 140 mm - Distance vertical spindle – table: 20 - 540 mm - Spindle speeds: 80 - 3800 rpm - Feed X – Y and Z axes - Rapid traverse: 1400 mm/min - Tilting vertical milling head 45° left and right - Swiveling overarm: 360° - Coolant system - Drive: 400 V / 5.0 kW - Required space: approx. W 2000 x H 2500 x D 2100 mm - Weight: approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Condition: excellent (used), functionality: fully functional, • Hexagon measuring arm with protective cover and plastic transport case Nwsdpfx Ahsx Tvf Ae Hob • Table with grid holes and drawer base

Condition: used, overall weight: 221 kg, total length: 400 mm, total width: 400 mm, total height: 540 mm, Cross tooling column with Gressel Nwodpfsx Ttzzex Ah Hjb Mounting holes 4 Pitch fixing holes 320 mm Length 400 mm Width 400 mm Height 540 mm Weight 221 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, overall weight: 208 kg, total length: 400 mm, total width: 400 mm, total height: 470 mm, Erowa ER-051145 FL-AA0324 Double side tooling column with Erowa Njdpfx Asx Ttzbeh Howb Mounting holes System Erowa Length 400 mm Width 400 mm Height 470 mm Weight 208 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 1998, overall weight: 35 kg, Metal cutting Tooling REISHAUER - HF 330 Diameter: 330mm 3 Chuck: 3 chuck Spindle bore:80mm Connector: 8 Length: 330mm Width: 100mm Nodpfx Aox Ttiloh Hewb Height: 0mm Weight: 35kg

Condition: good (used), Year of construction: 1994, Diameter: 500mm 3 Chuck: yes Spindle bore:160mm Connector: CAMLOCK D-8" Max. speed: 1900Rpm Nwedpfex Ttc Eex Ah Hjb Length: 0mm Width: 0mm Height: 0mm Weight: 60kg

Condition: used, Year of construction: 2004, Operating hours: Control on: 3123 h Machine on: 2970 h Program run: 902 h Spindle runtime: 988 h Technical data: Travel X/Y/Z: 650 / 500 / 450 mm Clamping area: 1000 x 600 mm Spindle taper: SK 40 Nodpjwglapsfx Ah Hewb Spindle speed: 12,000 rpm Table load max.: 400 kg Number of tool magazine positions: 20 Power: 24 kVA Machine weight, approx.: 5,500 kg Equipment: - Heidenhain iTNC 530 control - 20-position tool changer - Heidenhain tool probe - Heidenhain workpiece probe - Heidenhain handwheel - Menzel minimal quantity lubrication system - Approx. 25 tool holders

Condition: used, Year of construction: 2000, RAUHEIS Hommel TKLT 1000 ja weight of the machine ca. 200 kg Nwedpjg Si Snofx Ah Heb +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Type: UTB Nodpox Tp Ahefx Ah Howb Year: 2005

Condition: excellent (used), Year of construction: 2006, Metal cutting Tooling KITAGAWA - 250 Horizontal: Yes Vertical: Yes Nwsdpfex Tpzkjx Ah Heb Diameter: 230mm Tailstock: 3Mk indexing: 360.000° Centre height:180mm Control system:MAZATROL 640 M Length: 500mm Width: 400mm Height: 300mm Weight: 50kg

Condition: good (used), Tool cabinet with sliding doors Width: 2000 mm Depth: 500 mm Height: 1200 mm Shelf depth: 400 mm Nwodpfx Aox Tphkjh Hsb Key included The cabinet is old but sturdy The sliding doors operate flawlessly!

Condition: excellent (used), Turning tools with rotating cutting plate Type: RRSDR 3232P12 Make Mitsubishi Length 165 mm Nwsdpfed Hflaex Ah Hsb

Year of construction: 2010, condition: excellent (used), Measuring column in suitable transport box Height 500 mm diameter 120 mm Nwodpfsfdzvaox Ah Hjb Weight 37 kg

Year of construction: 2014, condition: new, digital length measuring device make Heidenhain ID 355 533-04 Nwodpjb T Uqijfx Ah Heb measuring bar type LF 481 - signal 1Vpp - measuring length 200mm