Coordinate Measuring Machine

Coord3 Hera

Condition: used, Gehrungs cold-cut circular saw KALTENBACH, type KKS 400 NA Machine no. 101701, year of manufacture 1983 Saw blade diameter 400 mm Cutting range at 90° round Ø 130 mm Cutting range at 90° square 120 x 120 mm Cutting range at 90° rectangular 305 x 20 mm Ncodpfx Aed N H A Njlnju Cutting range at 45° round Ø 130 mm Cutting range at 45° square 110 x 110 mm Cutting range at 45° rectangular 245 x 30 mm Clamping range of the jaw feed 30 to 140 mm Working height 1000 mm Miter cut 0 - 180° Feed stroke 600 mm Saw blade speed 10 + 20 m/min, 2 speeds Motor power 1.7 and 2.6 kW Hydraulic motor 1.5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material jaw feed with infeed roller track on the left, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Miter cut - saw angle with manual adjustment - Hydraulic feed control, cutting speed can be adjusted manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant system with electric pump in the machine base - Hydraulic unit permanently mounted on the base machine - Piece counter with zero reset Space required for the saw 2600 x 1200 x 1900 mm Weight of the saw approx. 1400 kg in good condition

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Nedpfx Aljd N Sm Denocu +++++

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load Njdpfx Aljlz Rvljnocu 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Press brake tool/upper punch for Trumpf press brake H256mm, L500mm, L550mm in segment Ncodjiimz Rspfx Alnsu

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Nedpfx Alef Dwa Ujnjcu Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Nsdpfxsvf D Ans Alnecu

Condition: good (used), Year of construction: 1990, 4-Axis Machining Centre Table dimensions 1200 x 660 mm Travel paths X 1050 mm, Y 650 mm, Z 660 mm Max. table load 1600 kg Feed speeds 15000 mm/min. Ncsdjfbml Nspfx Alnju Tol magazine with 31 tool places, partly equipped with BT 50 tool holders. 4th axis (controlled) NIKKEN CNC 250, clamping chuck diameter 250 mm Dimensions in mm: about 3000 x 5000 x 2900 Weight in kg: about 13000

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips/lippings (Min/max) mm 3 / 10 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Ncodpfxed Nt Rqo Alneu Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system) Distance (center-axes) of the Disappearing Dogs (mm) 1080 SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x kW 8) Free Space (for Milling unit) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 04.1570 + 283.205 Band Pressure zone - Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) speed 30 m/min (0° - 25) Fine Trimming unit 08.055 (2 x Kw 1) / 0° - 30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) with servo-motors Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (4 x Kw 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270°

Condition: excellent (used), Year of construction: 2001, operating hours: 8,155 h, functionality: fully functional, feed length X-axis: 1,800 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, table width: 850 mm, table length: 2,000 mm, overall weight: 13,500 kg, power: 30 kW (40.79 HP), CME FS-2 bed milling machine with only 8155 hours Ncedpfx Aoquqq Aelnsu control Heidenhain 426B incl measuring probe and complete set of manuals

Condition: excellent (used), pneumatically operated, water-cooled spot welding tongs for industrial applications Type DALEX 3427 D Nominal power at 50% duty cycle: 35 kVA Secondary short-circuit current: 20.5 kA Electrode force: 580 daN with double-acting cylinder - long stroke 62 mm - pre-stroke 40 mm Working stroke with stroke adjustment 0-22 mm Njdpfegibv Esx Alnecu with universal joint suspension and suspension bracket 10 m connection cable and control cable Electrode arms 350 mm Arm spacing 170 mm with synchronous welding control 15036