Used Mchale 991 Bc for sale (603)

Condition: good (used), 12-head drilling machine for sale, Cpedpfx Acjpy D Dws Nsu Table size: 400 x 360 mm

Condition: new, Year of construction: 2022, functionality: fully functional, working width: 750 mm, area performance: 5,100 m²/h, warranty duration: 24 months, tank capacity: 110 l, total height: 1,315 mm, total width: 975 mm, total length: 1,695 mm, water tank capacity: 110 l, gradeability: 10 %, noise level: 59 dB, Technical Specification Drive type: Battery powered Traction drive: Traction motor Brush working width: 750 mm Working/suction width: 950 mm Clean/dirty water tank capacity: 110 / 110 l Theoretical maximum area performance: 5,100 m²/h Practical area performance: 3,600 m²/h Battery voltage: 24 V Maximum battery operating time: 4 h Charger supply voltage: 100 – 230 V / 50 – 60 Hz Climbing ability: 10 % Brush rotation speed: 180 rpm Brush pressure: 40 g/cm² Maximum water consumption: 5.7 l/min Sound pressure level: 59 dB(A) Rated power: up to 2,350 W Permissible total weight: 650 kg Dimensions (L x W x H): 1,695 x 975 x 1,315 mm Cedjw Id H Nepfx Ac Nepu Side scrubbing module for time and cost savings: - Enables cleaning of areas near walls or shelves close to edges. - Retracts under the unit upon contact with obstacles, preventing damage. - Eliminates manual edge cleaning, reducing associated costs. Height-adjustable seat: - Provides a comfortable working position regardless of the operator's height. - Ensures a particularly comfortable posture during operation. - Allows extended and uninterrupted working intervals. Speed-dependent water dosing: - Reduced water consumption when negotiating curves or during slow movement. - Water-saving function increases the effective area coverage. - Shorter floor drying times and lower risk of residual water left in corners or turns. Suction bar made of die-cast aluminium: - Equipped with tear-resistant and durable Linatex® squeegee blades for excellent vacuuming results. - Quick and easy replacement of squeegee blades. - Retracts upon wall contact to prevent damage.

Year of construction: 2022, condition: ready for operation (used), A fully automatic horizontal tunnel stretch wrapper Bang & Co for securing products on corrugated cardboard blanks is available. Turntable speed: 100rpm, max. conveyor speed: 18m/min, carton width range: 70mm-650mm, min. product length: 200mm, max. spool diameter: 140mm, max. spool height: 125mm, film roll inner diameter: 38mm, film thickness range: 18µm-40µm. Machine dimensions X/Y/Z: approx. 1600mm/1250mm/1650mm, weight: approx. 500kg, operating hours: approx. 6851h. Dokumentation vorhanden. An on-site inspection is possible. Cpjdpjxwyvqofx Ac Nou

Year of construction: 2025, condition: new, functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 3,520 kg, total length: 5,825 mm, total width: 1,705 mm, total height: 2,914 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO SD Compact with Bunker and Drum Extension is ideal for recycling and material processing, efficiently screening soil, gravel, wood chips, and various waste types. Its modular design and adjustable drum speed deliver high flexibility, enabling faster throughput, better fraction separation, and easy adaptation to different sites. Key Features: • Modular drum with adjustable rotation speed for precise screening • Supports up to four material fractions per drum segment • Optional bunker expansion increases input capacity by up to 50% • Quick drum and bunker changes for versatile operations • Built-in cleaning brushes and adjustable screen inclination Cjdpfx Acjwyu Eus Nspu Tech Highlights: W 1.81 m · L 5.83 m · H 2.00 m · W max 2.91 m · Drum length 3.10 m (usable 2.50 m) · Qmax 60 t/h · Power 5.5 kW (400 V) · Drum Ø 1300 mm · Mesh Ø 6 - Ø100 mm · Hopper opening 2.47 m x 1.57 m · Filling H 1.81 - 2.91 m · Weight 3520 kg

Condition: used, Year of construction: 1998, x-travel 1700 mm y-travel 400 mm z-travel 400 mm table surface area 2x 1100 x 420 mm table load 500 Kg Cpodoxddq Sjpfx Ac Neu tool taper SK 40 control Sinumerik 810 D Siemens turning speed range - spindle 30 - 6000 U/min tool piece magazine with 20 Plätzen Working speed 1 - 30000 mm/min rapid traverse x / y / z axis 30 / 30 / 30 m/min total power requirement 20 kW weight of the machine ca. 5 t dimensions of the machine ca. 3,8 x 2,8 x 3,1 m

Year of construction: 2006, condition: excellent (used), Dispensing hot food products is normally associated with a number of health and safety risks. These risks are minimized with a fully automated dispensing system. The controls make sure that the operator avoids any direct contact with the 90°C hot product. The automatic bag-packing unit seals the bags once they are filled. Furthermore the need for lifting products over long distances is reduced since the ready packaged dishes are transported from the filling station to the operator via a small conveyer belt. This prevents inappropriate working positions. HOT-FILL DOS 3 ensures uniform portions. The quantity is controlled via the touch- screen display. The display also controls how quickly the product is to be dispensed allowing for flexibility in the workflow. The fully automated HOT-FILL DOS 3 sucks the product directly from the kettle and is fitted with a temperature alarm consistently ensuring the correct temperature of the product. Cpjdpfxjh A Hbxs Ac Neu

Condition: used, Year of construction: 1995, x-travel 1700 mm y-travel 400 mm z-travel 400 mm Control Siemens 480 D Cjdjvf Rhwopfx Ac Nspu Number of axles 4 St. table width 500 mm table length 2000 mm tooltaper DIN 2079 SK 60 SK 40 total power requirement 16,25 kW weight of the machine ca. 4750 kg dimensions of the machine ca. 3000x 2500x 2800 m Machine number 9599 - 4th axis / horizontal / diam. 315 mm - Chip conveyor - tool changer for 20 tools

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 1,000 mm, table length: 4,150 mm, table load: 4,000 kg, Magnum: powerful machining in machine construction and tool making Sk50 with extremely powerful spindel 50kw Glas scales in X/Y/Z Chip conveyor and coolant system X - Travel: 3500mm Y - Travel: 1000mm Z - Travel: 770mm Table Length: 4150mm Table Width: 1000mm Table load: 4000 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 50ISO/Bt/Mk Cjdpfx Acowycmme Nspu Power on spindle: 50kW Speeds / ranges: 4500Rpm ATC / revolver: 50 Number of controlled axis:3 Chip conveyor: yes Coolantsystem: yes Length: 8000mm Width: 5000mm Height: 3700mm Weight: 30000kg

Condition: used, Year of construction: 1997, I have a lot of Comec Berco Sunnen Az kwik-way machines for sale please write I will reply immediately whatshapp Cedjv Suvlopfx Ac Njpu

Condition: new, Producer: SERVOTECH Model: 200 Type: Bowl cutter Dimensions: 2350 x 2200 x 1910 (mm) Power supply: 400V 50Hz 3N Main engine power: 45/52 kW Total power: 57 kW Bowl capacity: 200 l Number of knives: 6 Shaft speed: Adjustable (200/1800/3600 rpm) Bowl speed: Adjustable (7.5 / 10 / 15rpm) Knife cover and loading: hydraulically lifted Weight: 3000 kg Cpedpjqlah Tjfx Ac Nou

Year of construction: 2018, condition: excellent (used), TOMRA T-705 BC Single, used selective waste collection device, MFG: Feb. 2018, serial: 606657-90162001-60642, German language menu, German and English user guide, service history, made in Norway This is a device dedicated to commercial spaces or locations where large volumes of single-use or reusable containers are collected, as well as shuttles with such containers. The TOMRA T-705 selective collection device is fast, being specially designed for heavy traffic and a high demand for the collection of recyclable or reusable containers. SPEED Instant recognition of barcodes and security markers without stopping the rotation Reduced waiting times when inserting containers one after another Increased availability during peak hours CLEANING Requires less time dedicated to cleaning compared to other RVMs Cleaning the device is easier and takes less time Less time dedicated to cleaning the device, a more attractive device TWO MODELS Device designed for both the collection of reusable and non-reusable containers Device designed for both reusable container crates and non-reusable container crates Both models feature touch display and TOMRAPlus interface Price: 5600 Euro + VAT, negotiable , ExWorks Oradea /Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Cjdpfx Acowz Rtke Nopu Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana.

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, working width: 350 mm, area performance: 1,540 m²/h, overall weight: 80 kg, warranty duration: 12 months, water tank capacity: 15 l, battery capacity: 25 Ah, GHIBLI WIRBEL FR 15 M 38 BC SCRUBBER NEW SONNENSCHEIN GF 12 025V GEL BATTERIES (2x) 2022 production year 380mm cleaning head (TB380) equipped with a new pad holder and a medium-hard pad, allowing work on any surface. Built-in battery charger facilitates daily use Polyurethane rubber bands, resistant to contact with oil liquids, greases and petroleum derivatives. New, efficient suction turbine ensures high water suction power from the squeegee The device is equipped with a new, durable suction hose Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Working width (mm): 380 Squeegee width (mm): 450 Efficiency (m²/h): 1,540 Number of brushes (pcs.): 1 Capacity of the clean water tank (l): 15 Capacity of the dirty water tank (l): 17 Weight without batteries (kg): 40 Weight of the machine ready for operation (kg): 80 Dimensions (L x W x H) (mm): 865 x 430 x 1,160 INCLUDED: NEW SONNENSCHEIN GF GEL BATTERIES 12 025V (2x) NEW suction turbine 24V 250W NEW pad holder with red pad NEW suction hose Suction bar with oil-resistant rubbers Tenzi Normal fluid 5 liters - FREE Cpedpfxowmc E No Ac Nju

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 5,000 kg, Bale clamp Load center: 800 Cpodpow Egpcefx Ac Nou ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2021, ISO 3A (51 cm), capacity 5,000 kg, sideshift, opening range 550-2,770 mm, width 2,000 mm, clamps 1,600 mm, ID OS1613

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 5,000 kg, Bale clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Good Description: Year 2021; ISO 3A (51 cm); Capacity 5,000 kg; Sideshift; Opening range 550-2,560 mm; Width 2,000 mm; Clamps 1,550 mm; ID OS1546 Csdpfx Acsw Dwrlj Njpu

Condition: new, Year of construction: 2024, Aluminum circular saw BC 450 HA, semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swivel range of 45° to the left and 22.5° to the right and an automatic mitre adjustment via stop functions. The saw stroke runs automatically and the material is clamped pneumatically. The saw blade (450 x 30 mm) runs horizontally. can also be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood! Equipment Double mitre machine with powerful drive motor Two-button control for triggering the saw cut (optionally also available as one-button control) Cjdpfepa Nxaex Ac Nspu Large mitre range from -22.5° to +45°, Swivel range 67.5° - 0° - 45° Automatic miter adjustment, fixed stop functions at -45° / 90° / +45° and two variable stop functions adjustable to the desired angle! Two horizontal pneumatic clamping cylinders Clearly arranged control panel Large protective hood covers the entire working area, is lifted pneumatically Adjustable blade and cutting feed Connections for extraction system Minimal lubrication system Air gun for cleaning the machine Saw blade ø 450 mm Work sequence 1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed 4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8. 8. at the end of the cycle, release both SAW buttons and press the STOP button 9. 9. open the clamping vice and remove or advance the material Plantec Maschinen GmbH

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, workpiece weight (max.): 3,500 kg, spindle speed (max.): 7,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working Area X-axis travel: 2,500 mm Y-axis travel: 1,000 mm Z-axis travel: 770 mm Distance spindle nose: 890 mm Number of machining axes: 3 Table Clamping surface left-right: 3,220 mm Clamping surface front-back: 1,000 mm Workpiece weight: max. 3,500 kg Spindle / Head Speed range: up to 7,000 rpm Drive power: 40 kW Tool Magazine Number of tool positions: 50 Workpiece Automation Storage type: magazine Control Control type: CNC Control model: Heidenhain ITNC 530 MACHINE DETAILS Electrical connection data Connection voltage: 400 V Dimensions & Weight Required space left/right: 6,500 mm Required space front/back: 5,000 mm Overall height: 3,700 mm Cpodpfx Aewztphec Nju Total weight: approx. 22,000 kg EQUIPMENT Chip conveyor: yes High-pressure pump The magnetic plates are not included in the scope of delivery (can be purchased optionally for €15,000). Machine will be provided partially dismantled at shop floor level.

Condition: new, COLUMN DRILLING MACHINE IBERDRILL BC-50 VE TECHNICAL DATA - STANDARD max. drilling capacity for steel (St 60) at continuous power S1 Ø 50 mm max. drilling capacity for grey cast iron (GG 20) at continuous power S1 Ø 60 mm Max. tapping capacity for steel (St 60) at continuous output S1 M 42 max. tapping capacity for grey cast iron (GG 20) at continuous output S1 M 50 tool holder in spindle MK 4 max. spindle stroke (drilling depth) 200 mm motor power spindle 4 kW Drive 3-speed gearbox and V-belt Speed adjustment infinitely variable via potentiometer Speed range for 50 Hz motor, n = 1.500 rpm 30 - 300; 90 - 900; 190 - 1.900 rpm Feed automatic or manual Cpjdpjgy Halofx Ac Nou Number of automatic feeds 4 gears range of automatic feeds 0,1 - 0,2 - 0,3- 0,4 mm/rev Table dimensions (width x depth) 550 mm x 550 mm column diameter 175 mm distance spindle center / column 360 mm Machine weight net/gross 760 kg / 850 kg Dimension transport v. (length x width x height) 2,4 m x 0,7 m x 1,3 m STANDARD EQUIPMENT / BASIC MACHINE Gearbox with quality gears and automatic oil pump lubrication and V-belt 3 gear speeds preselectable via 1 front lever 3 speed ranges with infinitely variable speed adjustment by means of frequency converter digital speed display integrated in front panel 4 automatic feeds electromagnetic clutch ergonomic 4-fold handle cross with integrated feed buttons handwheel for fine manual feed scale with adjustable drilling depth

Condition: used, Year of construction: 2018, operating hours: 21,382 h, fuel type: diesel, Machine type: Container terminal tractor Production country: NL Csdpfew A N U Nsx Ac Njpu Please contact Theo Lelie for more information

Year of construction: 2014, operating hours: 7,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Csdpfx Aoh Tyzfsc Njpu BAUER MC 96 BAUER HDS 100 BAUER BC 40 More informations on require!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, MAKA BC 150t compakt, second-hand machine 5-axis CNC machining center for machining aluminium and plastic. Stand portal in 4-column design (bridge center), 2 x unit carrier Technical data: Working ranges in 5-axis operation, with tool Ø 160 / length 160 mm: 2 x each: Y-axis: 1,500 mm X-axis: 2,500 mm Z-axis: 650 mm / with 180 mm fixture height Couplable tables, for processing large components. Extended extension stroke, for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Rotation axis 540° / swivel axis 196° (+/- 98°) Table design: - 2 x aluminum flat table, size 2,500 x 1,500 mm - M10 threaded bushes and centering bolts in the table top. - 3 x vacuum clamping circuit per table. - 3 x pneumatic clamping circuit per table. Milling unit: - 2 x universal unit for 5-axis milling with 50° inclined head, HSF F63 tool holder, max. power 12.5 kW (S1), speed infinitely variable up to 24,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip catcher system per milling unit, with lamella curtain. Tool changer: - 2 x rotary table tool magazine with 20 places. Control system: - 1 x Siemens SINUMERIK 840D SL machine control unit - 1 x Siemens OP 19 PCU control panel with 19" display, full keypad, membrane switch. - 1 x additional Siemens HT 8 portable manual control panel with 7.5" touchscreen, version with handwheel. Occupational safety: - 1 x soundproof cabin. - 2 automatic loading gates, with vision panels. - The loading and unloading area is protected by light barriers and bumpers on the tables. Measuring probe: - 2 x 3D radio measuring probes, with HSK F63 tool holder, for changing from the tool magazine. Minimum quantity lubrication: - 2 pieces minimum quantity lubrication - 2 flushing nozzles per milling unit, each individually controllable via M function. Table blow-off system: - 2 x Airknife table blow-off system, for blowing off the tables during the exit from the machining area. Limited in coupled operation. The machine is assembled and can be inspected in 89568 Hermaringen. Cjdpfx Acstq Hkrj Nspu

Condition: ready for operation (used), Year of construction: 2006, A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible. Cedpfx Aoxa Elcoc Njpu

Condition: good (used), Uchida BC 10 Business Card Cutter The UCHIDA BC-10 Business Card Cutter is a business card cutting machine that works with any high quality digital photocopying or printing device to produce professionally cut business cards automatically, easily and quickly. Whether you are a small business or a large corporation producing hundreds of cards per day, the innovative innovations applied to the UCHIDA BC-10 will satisfy any need. - Designed exclusively for business cards from A4 paper upwards - Up to 100 business cards per minute - Simple and fast operation Specifications Processing speed: 10 sheets per minute (100 business cards) Paper size: A4 Paper type Offset, coated, glossy paper Tolerance ±0.1 mm Item condition: used Scope of delivery: as shown More items - new and used - you will find in our store! Cpjdpfxsivd Aij Ac Neu International shipping costs on request!

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR Cpodpfx Aetrd T Tjc Neu

Condition: ready for operation (used), Year of construction: 2023, operating hours: 540 h, spindle speed (max.): 2,000 rpm, spindle motor power: 26,000 W, total height: 2,200 mm, total width: 2,300 mm, overall weight: 8,150 kg, product length (max.): 6,300 mm, number of axes: 2, Horizontal turning machine manufactured in 2023. This STYLE 750 (4000dbc) features a swing diameter over bed of 750 mm and a distance between centers of 4000 mm. It is equipped with a powerful 26 kW main motor and a maximum spindle speed of 2000 rpm. Consider the opportunity to buy this STYLE 750 (4000dbc) horizontal turning machine. Contact us for further details. • Swing diameter over bed: 750 mm • Swing diameter over slide: 530 mm • Distance between centers: 4000 mm • Bed width: 450 mm • Maximum load between centers: 1800 kg • Maximum load with fixed steady rest (type U): 2500 kg • Spindle bore: 105 mm • Spindle (A2-11) Cpjdpfx Aoyhpq Tsc Nju • Axes: • X-axis ball screw Ø: 32 mm • Z-axis ball screw Ø: 50 mm • Rapid traverse: 8 m/min • Feed range: 0.01–2000 mm/min • Tailstock: • Quill diameter: 125 mm • Quill stroke: 225 mm • Quill taper: MT6 • Standard equipment (machine-integrated): • LED machine lighting • Cooling • Automatic lubrication • Steel ball screw covers • Full cover • Front sliding door • Electronic handwheel • Constant cutting speed Additional equipment • Chip conveyor • Automatic tool changer, 8 positions, VDI-50 • Heavy-duty tailstock, desktop version SW • 26 kW main motor • Oil separator • Steady rest D50–300 mm • Steady rest D60–400 mm • Coolant pump switch • 3-jaw chuck Ø315 – Schunk Rota S Plus 2.0 • Speed potentiometer • LED lamp • LAN • Stronger cooling with gun • Handwheel

Condition: ready for operation (used), Year of construction: 2007, overall weight: 1,550 kg, cutting speed: 2,800,000 mm/min, Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details. Cpedpfx Acjyhfm Do Nsu • Blade diameter: 450 mm • Blade bore: 32 mm • Cutting capability: double miter (left and right) • Build: heavy-duty, solid construction for high stability and precise results • Condition (as stated by owner): low operating hours; regularly serviced; maintained in excellent condition • Application: suitable for workshops, assembly lines, and heavy-duty industrial environments