Used Mazak Sqt 10 Ms for sale (339)

Condition: used, Year of construction: 2008,

Condition: used, Year of construction: 2011,

Condition: used, Technical details: operating hours: 2151 h milling spindle operating time: 2 h turning spindle switch on : 709 h swing diameter: 1000 mm turning diameter: 900 mm workpiece height max.: 800 mm control: Mazatrol Smoothg x-axis: 470 mm z-axis: 876 mm c-axis: 20 m/min tool holder / places: 12 revolution per minute: Revolver 4000 U/min Nedpfeydvfcex Ah Hswb workpiece weight: 3000 kg rapid power traverse in X-and Z direction: 24 m/min weight of the machine ca.: 14 t dimension machine xH: 3989 x 2375 x 3400 mm

Condition: used, Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (min.): 3,300 rpm, spindle bore: 104 mm, travel distance X-axis: 870 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,598 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, Equipment: rotational speed infinitely variable, MAZAK CNC Turning Machine MODEL: INTEGREX e-500 HS /U1500 with Mazatrol 640M PRO Control for sale. The machine is in good condition and can be inspected under power on site. The machine maintenance can be documented. In 2025, the X and Y axes were replaced. The milling spindle and gearbox were replaced in 2024. Technical Data - Max. swing diameter: 820 mm - Max. turning diameter: 820 mm - Max. turning length: 1524 mm Main spindle: - Speed range: 0-3300 rpm - Drive power: 30 kW / 22 kW - Max. torque: 588 Nm - Spindle nose: A2-11" - Spindle bore: 104 mm - Indexing: 0.0001 Sub spindle: - Speed: 0-3300 rpm - Drive power: 30 kW / 22 kW - Max. torque: 588 Nm - Spindle nose: A2-11" - Indexing: 0.0001 Milling spindle: - Drive power: 37 kW - Max. torque: 260 Nm - Speed range: 0-10,000 rpm - Tool holder: SK50 Tool magazine: Nwedsx Syldopfx Ah Hob - Number of tool pockets: 120 Travel: - X: 870 mm - Z: 1598 mm - Z2: 2458 mm - Y: 500 mm - B axis: -30 to 210°, 0.0001° Feed rate: - X/Y/Z: 40 mm/min Machine data: - Connected load: 104 kVA - Operating voltage: 400V / 50 Hz - Required footprint (L x W): 7 x 3.5 m Special accessories: - 120-position tool magazine - High-pressure coolant 70 bar - Renishaw - Laser measurement system for rotating tools - Interface set - Air/water through-spindle cooling - Overload monitoring system - Mayfran Consep 2000 chip conveyor - SMW quick-change chuck

Condition: like new (used), Refurbished Mazak Main Spindle QTS 200 The spindle has been completely refurbished; spindle bearings and spacer sleeves have been replaced. Subsequently, it has been balanced. We have further refurbished Mazak spindles in stock; feel free to send us your enquiry. This is an exchange spindle, which means a used part is required in return. Nodjxawctspfx Ah Howb If you have any further questions, we are happy to assist you.

Condition: refurbished (used), Overhauled Mazak main spindle for VTC 200 or VTC 300 for sale. The spindle has been fully overhauled, spindle bearings and intermediate sleeves have been replaced. The taper has been reground. Subsequently, it has been balanced. The maximum speed is 12,000 rpm. We have additional overhauled Mazak spindles in stock; feel free to send us your inquiry. This is an exchange spindle, meaning a core return is required. If you have any further questions, we are at your disposal. Njdpfx Ahsvdkdio Hjwb

Condition: used, Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: PC Fusion 640 M, total height: 3,100 mm, total length: 5,200 mm, total width: 3,460 mm, table width: 2,000 mm, table height: 760 mm, table load: 1,400 kg, overall weight: 12,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, CNC Control Mazatrol PC Fusion 640 M Nodpoyddlwofx Ah Hewb Table size 2000 x 760 mm Table load 1400 kg Number of pallets: 1 x Movement X-axis 1740 mm Movement Y-axis 760 mm Movement Z-axis 660 mm 4th Axis (Rotary table) Kitagawa MR 250 Spindle taper CAT 40 Spindle speed 12.000 1/min Spindle motor 11/7,5 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2004, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Fusion 640 M, total height: 3,050 mm, total length: 7,805 mm, total width: 7,109 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,600 kg, spindle speed (max.): 12,000 rpm, tool weight: 700 g, Equipment: documentation/manual, CNC Horizontal Machining Centre CNC Control Mazatrol 640M Pallet table size 500 x 500 mm Number of pallets 10 Table load 700 kg Movement X-axis 730 mm Movement Y-axis 730 mm Movement Z-axis 740 mm Table indexing 360 x1 ° Spindle Taper CAT 40 Spindle 12.000 1/min Nsdpfxjyddhxo Ah Hswb Spindle motor 22/15 kW Magazin capacity 80 Required floor space 9850 x 10145 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2007, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix Nexus, workpiece weight (max.): 700 kg, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,000 kg, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Horizontal Machining Centre Nsdpfjyddf Rsx Ah Hewb CNC Control Mazatrol Matrix Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 kg Movement X-Y-Z-axis 730x730x740 mm Table indexing 0,001 ° Spindle taper DIN 69871A-40 Spindle speed 18.000 1/Min Spindle motor 35-26 kW Magazin capacity 80 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 1997, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Mazatrol, controller model: M-Plus, overall weight: 36,000 kg, tool weight: 2,200 g, CNC Horizontal Machining Centre with Palletech Table size 800 x 800 mm. Table NCRT. Number of pallets 14. Movement x-Axis 1300 mm. y-Axis 1100 mm. z-Axis 1000 mm. Nwedpfsyddfdsx Ah Hsb Table indexing 0,001°. Number of tools in magazine 237 pieces. Maximum spindle speed 35-7.000 min. Tool taper DIN 69871A-50. CNC control M-plus If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 Njdpfoydc Evex Ah Howb If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Tool cabinet and cutting tools not come. Only tool holders will come. Nwodpsx Atyajfx Ah Hob

Condition: ready for operation (used), Year of construction: 2012, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, it's ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information. • High-pressure coolant (15 bar) Njdpfx Asx D I A Soh Hewb • Auto tool length measurement x 2 units • Visiport • 19" screen • Siemens software P • Signal tower • Additional work light • RMP60 probe • Bracket for NCRT for vertical use • Table centre partition • 48-tool magazine Additional equipment • Consep 2000 (chip conveyor/coolant system) for 15 bar, left-hand discharge

Condition: ready for operation (used), Year of construction: 2005, Mazak HCN 5000 Horizontal Machining Center (2005) Nwodjyc R Atspfx Ah Hsb Manufacturer: Mazak Model: HCN 5000 Condition: Good Year of manufacture: 2005 Control: Mazatrol 640 Further information available upon request

Condition: good (used), Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, CNC control Mazatrol Matrix 2-fold pallet changing device NC-swivel rotary table 80-fold tool changer high pressure coolant through the spindle 20bar chip conveyor Technische Daten / technical details: Njdpotp Hgzefx Ah Hewb Verfahrweg X / X-Travel 630 mm Verfahrweg Y / Y-Travel 765 mm Verfahrweg Z / Z-Travel 510 mm Schwenkbereich A-Achse / swivel range A-axis -120 - +30 ° Drehbereich C-Achse / rotary range C-axis 360 ° Tischgröße / table size 500x500 mm Werkzeugschaft / spindle taper SK40 Drehzahl / spindle speed 35-12000 UpM /rpm Eilgang / rapid feed 50 m/min Anzahl der Werkzeugplätze / tool places in ATC 80 fach / fold Antriebsleistung Hauptantrieb / drive capacity main drive 26 kW Gewicht der Maschine ca. / weight 17000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Year of construction: 2012, condition: good (used), Mazatrol Smart CNC control 3-jaw chuck C-axis driven tools 12-fold revolver Tool Eye tail stock coolant device Nwodpfxoiyx Dio Ah Hob chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser / max. swing diameter 660 mm max. Drehdurchmesser/ max. turning diameter 350 mm max. Drehlänge / max. turning length 532 mm Planweg (x) / cross way (x) 225 mm Längsweg (z) / longitudinal way (z) 560 mm Drehzahlbereich / spindle speed 5000 UpM /rpm Drehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X/Z / rapid feed X/Z 30/33 m/min Antriebsleistung Spindel / drive capacity spindle 15 kW Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1999, functionality: fully functional, Mazatrol PC-Fusion CNC 640 M. X = 1120 mm Y = 510 mm Z = 510 mm Table 2820 x 655 mm Table loading 800 kg Machine weight 6000 kg Cooling threw spindle. Including probes. Chip conveyor. Nwsdpfxjyctdms Ah Hjb

Condition: used, YOM 2004 Mazatrol PC Fusion 640 M Axis X 1660 mm Axis Y 510 mm Njdev Ax Uyjpfx Ah Hswb Axis Z 510 mm Table length 2000 mm Table width 510 mm Max. part weight 1000 kg Number of tool pockets 30 Spindle taper CAT 40 Max. spindle speed 10000 rpm Spindle motor power 18.5 kW

Year of construction: 2014, condition: used, machine/vehicle number: 239319, recorded operating hours: 14,765 (as of 08/25), weight: 6,760 kg, 12-position tool changer, MAZATROL Smart control, lubricant processing system, chip conveyor, spindle stroke: 1,300 mm, max. machining diameter: 380 mm, SMW K3-ZSW steady rest, ATTENTION: Collection of this item only by prior arrangement!!! Nwsdpfeycitdex Ah Hjb

Condition: used, Year of construction: 2018, operating hours: 10,770 h, machine/vehicle number: 291353, Weight: 16,500 kg, tool changer: 48 stations, travel paths (x/y/z): 4 mm, control: MAZATROL Smoothg, lubrication processing unit, chip conveyor, cooling unit, without machine vices, milling spindle guard damaged, 1 tool pocket (No. 28) defective, ATTENTION: Collection of this item by arrangement only!!! Nsdpfxeycir Ho Ah Hjwb

Condition: used, Year of construction: 2018, operating hours: 12,678 h, machine/vehicle number: 290060, Weight: 16,800 kg, 48-position tool changer, travel paths (x/y(z): 4 mm, with lubricant processing, chip conveyor, cooling unit, control cabinet. ATTENTION: Collection for this item by prior arrangement only!!! Nwedpeycitkefx Ah Hob

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, number of axes: 3, This 3-axis Mazak VTC-20C was manufactured in 1999. It features a vertical machining center with a table load capacity of 1,000 kg and dimensions of 510 mm by 2,000 mm. The machine offers X, Y, and Z-axis travels of 1,660 mm, 510 mm, and 510 mm respectively. If you are looking to get high-quality milling capabilities, consider the Mazak VTC-20C machine we have for sale. Contact us for more information. Nwjdpfxoycii Es Ah Hsb • Capacity: • Drilling capacity in S45 (JIS): 25 mm • Milling capacity in S45 (JIS): 165 cm³/min • Tapping capacity in S45 (JIS): M24 × P3 • Table: • Height from floor: 750 mm • Number of tables: 1 • Table length: 510 mm • Table width: 2,000 mm • T-slots (number): 5 • T-slot reference width: 18 mm • T-slot distance (pitch): 100 mm • Distances: • Spindle nose to table top: 180–690 mm • Spindle center to column: 550 mm

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 186770, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, controller manufacturer: MAZAK, controller model: FUSION, overall weight: 1,320 kg, spindle speed (min.): 18,000 rpm, number of slots in tool magazine: 80, tool weight: 1,200 g, Equipment: chip conveyor, documentation/manual, Mazak HCN 5000 Fusion horizontal machining center. Continuous 4th axis table, Tecnoforme 20 Bar system with side-mounted coonsep rotofilter. Used machine in good condition, can be inspected under power. Condition: Used Location: Italy Nwjdpfx Ahexugv Ee Heb

Condition: new, For sale is a spindle cover suitable for a Mazak VTC 30C. The cover is new and has never been installed. Njdjydvi Uspfx Ah Hswb

Condition: used, Year of construction: 2007, swing dia. 430 mm Distance between the spindles 1450 mm control MAZATROL 640T x-axis 310 mm z-axis 605 mm spindle tunring speed 4.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Gantry Loader Accessories, tools, and clamping devices shown are only included in the scope of delivery Njdpfx Asyb S Nrjh Howb if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!