Used Maurer Stage for sale (2,727)

Condition: good (used), Grundfos PNSNA99072221 Centrifugal pump Duedpfx Asx R U Nzjfnsl Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade stainless steel, see plate for full spec

Condition: used, Vertical multistage high-pressure centrifugal pump KSB Type Movichrom N CN 3/10 2R Serial no. 1-P30-837561 Nominal flow rate max. 3 m3/h Nominal delivery head 70 meters = 7 bar Nominal speed 2900 rpm Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Pump construction in 10 stages Duodpfx Asrl U S Ejfnsl - Pump elements made of stainless steel, pump base made of cast iron - Connection flanges DN 32 - Suitable for drinking water supply, irrigation and drainage Space required for pump L x W x H 250 x 220 x 830 mm Weight 38 kg Unused replacement pump from stock, as good as new Not a submersible pump or submersible pump

Condition: excellent (used), Grundfos pump. Type - CRE45-3 AN-F-A-E-HQQE 2,5" Capacity - 45m3/T. 11kW. Pmax/Tmax - 16/120 bar/gr. celcius. Is mounted with mge160mb2-ff300-f3 transmitter. Dedpfeii N E Ijx Afneul

Condition: used, functionality: unexamined, machine/vehicle number: A10S, overall weight: 220 kg, input voltage: 200 V, Used Ebara A10S Multistage Dry Vacuum Pump Manufacturer: Ebara Model: A10S Ultimate pressure: 4.0/5.3 Pa Pumping speed: 1200 L/Min Power: 200/220 volt, 50/60 Hz (3Ph) Dodew H Rblopfx Afnoul Weight: 220 kg Multiple units in stock.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 036938, Alfa Laval LKH 114 SSS 22kW 3 stage centrifugal pump Dedpowf Ndpjfx Afnoul Excellent condition

Condition: good (used), Grundfos PNSNA96513352 Centrifugal pump Dsdpfx Afsx R U E Ajnoul Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). see plate for full spec, 2 in stock

Condition: used, Vertical multistage high pressure centrifugal pump GRUNDFOS. Pump as good as new, but a part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-V Year of manufacture approx. 2012 Delivery capacity at 7,2 bar: max. 10 m3/h Dujdpfx Afsfupadenol Delivery head: max. 91.8 meters Mains connection: 400 Volt, 50 Hz Power: 3 kW - pump construction in 9 stages - made of stainless steel 1.4401 - the pump is as good as new, but there are several new pump chambers included - part of the magnetic coupling is missing suitable for drinking water supply, irrigation and drainage Packed in the original wooden box space requirement pump LxWxH 1100 x 250 x 300 mm Space requirement shipping box LxWxH 1400 x 330 x 340 mm Weight with shipping box 85 kg As good as new No submersible pump or submersible pump

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 105911, Alfa Laval LKH 114/163 FSS 3-stage centrifugal pump Dusdowf Nb Uepfx Afnol 5kW Very good condition

Condition: as good as new (ex-display), Grundfos CRNE1-9 Vertical multistage pump Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade stainless steel, see plate for full spec, 2 in stock Dsdpfx Afjvw Sqdjnsul

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 10000987991, overall weight: 5,110 kg, load capacity: 6,300 kg, main lifting speed: 4,000 mm/min, lifting height: 5,200 mm, 6.3t S-DG Double-Girder Overhead Crane TECHNICAL DETAILS Crane rail type: 60 × 40 Load capacity: 6,300 kg Span: 17.100 m Maximum deflection of crane bridge at rated load: 22.8 mm Wire Rope Hoist Max. lifting capacity of hoist 1: 6,300 kg Hoist classification: 1.2 + 1.2 m (D_min) Lifting height: min. 4.9 m / max. 5.20 m Type of trolley: double rail trolley Wire rope control: with hook drift Hook type/size: RSN2.5V Speeds Hoisting speed at rated load: min. 0.08 m/min to max. 4.0 m/min CSR speed at partial load: max. 6.00 m/min Trolley travel speed: max. 20 m/min Crane travel speed: max. 40 m/min MACHINE DETAILS Weight of crane including hoist: 5,110 kg Electrical Data Supply voltage: 3 Ph / 400 V / 50 Hz Control voltage: 48 V Area of application: indoors Ambient temperature: min. 5 °C to max. 40 °C Motor Power Main hoist motor: 4.5 kW Duty cycle main hoist motor: 60% ED Trolley travel motor: 1 × 0.45 kW Duty cycle trolley travel motor: 40% ED Crane travel motors: 2 × 0.65 kW Duty cycle crane travel motors: 40% ED EQUIPMENT DynADrive inverter control Control Pro Performance 4-stage hoist limit switch Hoist brake Wire rope drum Gearbox Overload protection Load spectrum recorder Dsdpfxox Nvlbj Afnsul Slow/stop limit switches for trolley and crane travel Crane equipped with REMOX516MI radio remote control Includes signal horn (sound level 98 dB) Includes spare transmitter for radio remote control Includes storage cabinet for remote control Rope angle features Safety festoon line approx. 30 m long, along central support row Includes mains disconnect switch and power feed at any point Rising main (fixed installed cable) to be provided by customer Note: Further technical details can be found in the attached quotation.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: V001257, Profi-Joint Shaper 6000mm two stage press Includes PUR glue pump and applicator Dedjv Ryb Rspfx Afnjul Additional consideration: Sawdust extraction (A$20,000)

Condition: good (used), power: 360 kW (489.46 HP), fuel type: diesel, color: orange, Year of construction: 2019, operating hours: 23,066 h, Equipment: air conditioning, Technical information Track width: 65 cm Drive: Track Make of engine: BB-6WG1XQA-04 Empty weight: 87.000 kg Functional Bucket capacity: 2,2 m³ Condition Technical condition: good Visual appearance: good Identification VIN: T4323 / E638 Serial number: HCMZFF9ZV00050772 Dusdpsx Su Duefx Afnjl Other information Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 14,8x4,45x4,77 Production country: JP Additional information Please contact Antonio Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, Year of construction: 2025, load capacity: 7,000 kg, lifting height: 34,700 mm, total length: 10,060 mm, Lenkart: 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp: Dreifach-Teleskop - Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig - Motornorm: Stage V / Stufe 4 - Nennleistung Verbrennungsmotor / Leistung (kW) 211 Hp / 155 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with CVT - Getriebe Speedshift - Max. travel speed 40 km/h - Zugkraft 9300 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen: 29 % / 38.70 % - Pumpenart: Verstellpumpe - Hydraulikfördermenge: 185 l/min - Hydraulikdruck: 350 bar Dusdsx Avzmepfx Afnol - Motoröl: 13 l - Hydrauliköl: 300 l - Fassungsvermögen des Kraftstofftanks: 320 l - Abgasnachbehandlung für Diesel (AdBlue®): 24 l - Geräuschpegel im Fahrerstand (LpA): 68 dB - Außenschallpegel (LwA): 109 dB - Vibrationswert an Händen/Armen: < 2.50 m/s² - Lenkräder (vorne / hinten): 2 / 2 - Steuerungen: 2 Joysticks - Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco): Standard

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening during reverse tipping, side walls pendulum-mounted and foldable, side drop sides with spring relief, platform floor made of 4 mm fine-grained steel, 8 heavy-duty recessed lashing rings in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the side, stepless height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode in front, integrated storage compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy cover), contour marking according to ECE R 048 regulation, vehicle with day registration, rental price from €550. Typing errors, mistakes and changes reserved, sample images. More data at: !, More details: ! Dujdpfx Asx S N Axjfnel

Condition: used, Year of construction: 2016, operating hours: 2,500 h, Single-sided edge banding machine for processing straight workpiece edges and for applying and further processing various edge materials in longitudinal and cross feed. OVERVIEW OF THE AGGREGATE CONFIGURATION: - Infeed fence extension by 300 mm with additional unit for laminate overhang - JOINTER UNIT 2 x 2.2 kW 200 Hz - GLUING UNIT A12 with automatic edge feed – APPLICATION UNIT QA 65 N EVA - TRIMMING UNIT BEVEL/STRAIGHT 2 x 0.35 kW - PNEUMATIC ADJUSTMENT TRIMMING BEVEL/STRAIGHT - PNEUMATIC 2-POINT ADJUSTMENT TRIMMING - Multi-stage milling unit MS40 2 x 0.55 kW with opposed rotation and axis adjustment – with PNEUMATIC 2-POINT ADJUSTMENT of tracing rollers (flush and radius/bevel milling) - MULTIFUNCTION FORM MILLING UNIT 2 x 0.4 kW - MULTISTAGE SCRAPING UNIT MZ 40 - PNEUMATIC SCRAPER ADJUSTMENT - GLUE JOINT SCRAPER - BUFFING UNIT Duedpfxsx S Nc Ej Afnel - SEPARATING AGENT SPRAY UNIT WORKPIECE - Glide agent spray unit - CLEANING AGENT SPRAY UNIT WORKPIECE - POWERTOUCH control system

Condition: good (used), Year of construction: 2006, 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter via cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Djdpfxsx S Ip Ds Afnjul Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: excellent (used), Year of construction: 1965, table load: 60,000 kg, table width: 3,250 mm, total width: 3,250 mm, Indexing dividing setting: 1e stage full rotation setting 5 Gr 2e stage full rotation (fine) 30 " Turning rotation setting: 1e stage 1 - 48 Rpm 2e stage 0,27 - 11 Rpm   V-Axis movement setting: 1e stage 10 mm 2e stage (fine) 0,02 mm Scraped guide way 1 size: 300 x 85 mm  Scraped guide way 2 size: 225 x 85 mm Scraped guideway 3 size: 250 x 85 mm Duedpsx S Ihaofx Afnel Table Ø: 3250mm Table load: 60 T Movement V-axis: 1800mm Rotation B-Axis: 360000° Rotation speed B-Axis:48Omw/min. Movement speed V-axis:1600mm/min. Length: 6900mm Width: 3500mm Height: 1400mm Weight: 25000kg

Year of construction: 2013, condition: refurbished (used), functionality: fully functional, This is an SCC 61 combi steamer from the premium manufacturer Rational, electric version. This combi steamer is equipped with a hanging rack for 6 shelves. The unit has been fully overhauled in our in-house workshop and is in full working order. It is offered with a 6-month warranty on all electrical parts. The base stand pictured is not included in the offer, but can be purchased optionally. An invoice with VAT shown separately will be provided. Service: We are happy to assist in arranging a certified Rational service partner. Are you looking for a specific Rational device type? Contact us—we have access to a wide range of used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: - 6 months warranty on electrical parts, limited to replacement of defective parts, excluding installation/removal costs - High-quality branded equipment at fair prices - Professional refurbishment/inspection & expert cleaning - Tested & fully functional—or your money back - Flexible shipping or collection options - Competent advice—before and after purchase - Provision of user manuals, wiring diagrams & spare parts - Electrical safety check according to DGUV V3 This combi steamer provides space for 6 x 1/1 GN containers. In automatic mode, the unit independently detects the ideal cooking path for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing), as well as the size of the food, loading quantity, and product-specific requirements. Technical data: - Dimensions (W x D x H): approx. 847 x 776 x 782 mm - Power supply: V: 400 / kW: 11.0 / Hz: 50/60 - Capacity: 6x 1/1 GN - Weight: approx. 103 kg - Serial number: E61SH13042345756 - Year of manufacture: 2013 Condition: used, fully functional Further information: - With careControl - self-cleaning system - In combi-steamer mode, three operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C) - Core temperature probe - Handshower with automatic retract - 8.5" color display and touchscreen - 5 programmable fan speeds - Integrated, maintenance-free fat separator - Automatic start time preselection - 7 cleaning levels for unattended cleaning—including overnight - Steam injection adjustable in 3 levels—from 30°C to 260°C - 5 programmable proofing stages - USB interface - Seamless, basin-shaped hygienic cooking chamber with rounded corners - Halogen cooking chamber lighting Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Dodpjx S Epnsfx Afnoul If you have any questions, require advice, or would like to view the equipment locally, you can reach us by phone during our business hours: Monday–Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is carried out exclusively under our general terms and conditions (GTC).

Condition: new, Year of construction: 2025, heating capacity: 49 kW (66.62 HP), smoke pipe connection diameter: 180 mm, input voltage: 380 V, Size: 2/S Nominal heat output: 49kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed Duedpfxsdlhafs Afnsl For rooms from: 1.450 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 15 - 25 kg/h Blower air capacity, free blowing: 4.000 m³/hour Blow-out opening: Ø 450 mm Flue pipe connection Ø 180 mm Weight: 1.025 kg SPS control cabinet: 380 Volt

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: compressed air brake, Three-way tipper, body side panels hot-dip galvanized, loading height approx. 940 mm, front panel foldable for overloading, central locking system for side and rear boards, automatic rear board opening when tipping backwards, side panels can swing and be folded down, side panels with spring assistance, platform floor made of 4 mm fine-grained steel, 8 high-strength recessed lashing eyes in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the side, continuously height-adjustable drawbar, removable rear stakes, gearbox-mounted support winch with load and quick modes at the front, integrated compartment in the chassis for two aluminum loading ramps, lockable ramp compartment (privacy protection), contour marking in accordance with ECE R 048 regulation, Rental price from €550, -- Errors, omissions and changes reserved, sample pictures --, More data at: !, More details: ! Dedpfxex S N Afs Afnoul

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 weight of the machine ca. 6,5 t dimensions of the machine ca. 7400 x 2100 mm Additional information Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg Dujdpfxox S Ehdj Afnjl In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Work area enclosure with two sliding doors. Machine length 5700 mm, with swarf converyor 7400 mm Machine width 2100 mm

Condition: new, Year of construction: 2025, Size: 6 Nominal heat output: 170kW Dedpfx Afsdlhdbenjul -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 4.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 40 - 50 kg/h Blower air capacity, free blowing: 14.000 m³/hour Outlet opening: Ø 700mm Flue pipe connection Ø 220 mm Weight: 2.150 kg SPS control cabinet: 380 Volt

Condition: new, Year of construction: 2025, Size: Prestige SE Nominal heat output: 25kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms from: 350 - 600 m³ (according to DIN) Fuel: logs, chips, chip briquettes fuel consumption: 8 - 10 kg/h Blower air capacity, free blowing: 1.450 m³/hour Blow-out opening: Ø 300 mm Flue pipe connection Ø 150 mm with flue gas blower Weight: 400 kg Dedpfx Ajdlhcyefnsul SPS control cabinet: 220 Volt

Condition: new, Year of construction: 2025, Size: 0 Nominal heat output: 34kW -- BImSchV stage 2 and CE conform-- Dodsdlgvfjpfx Afnsul Combustion chamber completely fireclayed For rooms from: 850 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 10 - 12 kg/h Blower air capacity, free blowing: 2.200 m³/hour Blow-out opening: Ø 350 mm Flue pipe connection Ø 150 mm with flue gas blower Weight: 690 kg SPS control cabinet: 380 Volt

Condition: new, Year of construction: 2025, Size: 3 Dusdpfxjdlhbpe Afnel Rated thermal output: 87kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms from: 2.200 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 25 - 30 kg/h Blower air capacity, free blowing: 6.000 m³/hour Blow-out opening: Ø 500 mm Flue pipe connection Ø 200 mm Weight: 1.250 kg SPS control cabinet: 380 Volt