Used Marking Plate for sale (14,483)

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Bedewtc Hgepfx Aa Djdb Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm Bodpfeh Auahex Aa Dodb 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots Bdodpjwlhd Uofx Aa Djb T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T Bedowlhflspfx Aa Djdb

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) Bdodpfx Aaew Hhwwj Deb • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: used, Year of construction: 1998, gebraucht 1998 090148 prompt, Zwischenverkauf v Belgien 24900 € Bsdpfx Aaeyackws Dsdb 1 3100 mm 6 mm 0.5 - 3.5 ° 9.5 kW 950 mm 4070 mm 2330 mm 3400 mm 1850 mm 5500 kg Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrier Foot pedal Table supports with ball bearings 1 side arm 1500 mm 2 support arms Operating manual in German with CE declaration of conformity

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape Bedpfx Aaewka Ups Dedb - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: good (used), Year of construction: 2001, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm Bedpfsy Ig R Eex Aa Djdb down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good condition (!!) from a maintenance workshop Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side fence, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch - 2x front emergency stop button - Rear safety guard (protective grille) - original operating instructions

Condition: excellent (used), 4 off Insize Granite surface table dimensions 1000x630x140mm. Each one is mounted on an adjustable base. Bdodpoy Igi Ujfx Aa Dob Available for 600€ each. All 4 for €2100

Condition: good (used), 2 used T-slot clamping angles Height: 1500 mm Bdjdpfsy Iakfsx Aa Dsb Width: 1000 mm Depth: 500 mm 10 transverse T-slots 3 longitudinal T-slots premium surface finish

Condition: good (used), Clamping plate with prism, centering table, centering device, plate field, welding table, welding table, plate boring machine Bdjdpfx Asb Uhn Nja Djb -Ideal for centering shafts -Width: 658 mm -Table length: 2396 mm -Height: 115 mm -Working height: 920 mm -Prism length: 2900 mm -Prism width: 140 mm -Dimensions: 2920/730/H1200 mm -Weight: 540 kg

Condition: like new (used), Year of construction: 2013, cutting length 1060 mm cutting angle 2 ° no. of strokes 50 Hub/min Bdsdpoua Iulsfx Aa Dob engine output 4,0 kW weight of the machine ca. 0,67 t Motorised guillotine shears type 165.03 Technical data: Working width (cutting length): 1060 mm Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Machine stroke rate approx.: 50/min Cutting angle: 2° Opening width hold-down device: 5 mm Factory setting cutting gap 0.1 mm - Digital display for backgauge - Front table support - Operating instructions available

Condition: excellent (used), Year of construction: 2004, control type: CNC control, controller model: Siemens, number of rollers: 4, roller (top) diameter: 12 mm, side roll diameter: 14 mm, working width: 3,100 mm, sheet thickness (max.): 14 mm, overall weight: 12,000 kg, total length: 5,000 mm, total width: 1,900 mm, total height: 3,900 mm, 4 roll plate bender HAEUSLER - VRM-HY 3000 x 14 MACH-ID 9611 Make: HAEUSLER Type: VRM-HY 3000 x 14 Control: Siemens Rolling width: 3100mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending: 10mm Number of rolls: 4 Rolling speed: 0-5 Top support: yes Length: 5000mm Width: 1900mm Height: 3900mm Bdodoy H A Uqepfx Aa Djb Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 2001, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 190 mm, side roll diameter: 170 mm, roller length: 2,600 mm, working width: 2,500 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, overall weight: 2,800 kg, total length: 4,500 mm, total width: 1,000 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, hardened rollers, Bending capacity -Plate width : 2500 mm -Rolling plate thickness: 6 mm -Prebend thickness: 4 mm Bsdpfx Aaoy H Ayts Dsdb Rolls dimensions: -Useful length 2600 mm -top roll D 190 mm -side rolls D 170 mm Configuration of the machine Rolls hardened induction treatment, high strength surface of the 3 rolls • Power driven total on the 3 rolls, hydraulic motor each roll • Conical bending hydraulic attachment • Re-rolling system welded shells rounding. • Opening hydraulic front drop-end • Electric 3 phase 380/50 Vac, power 5,5 Hp. • Speed infinitely variable slow-fast stepless • Digital position readouts of the bending rolls.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 40 h, Guillotine shear with a maximum of 40 operating hours, Cutting capacity: 3.5 mm sheet thickness, tensile strength 200 N, Cutting capacity: 2.5 mm sheet thickness, tensile strength 400 N, Cutting capacity: 1.65 mm sheet thickness, tensile strength 600 N (V2A), Used only for 1.5 mm coated sheets, Hold-down opening: 25 mm (can be reset to factory spec), Strokes per minute: 56, Bdodpfx Aajxal Uws Dob Light barrier, Cutting angle: 2.4°, Upper blade has a 60° pointed grind for use with plastic-coated sheets. The upper blade is non-reversible. Rated power: 4.0 kVA Weight: 860 kg.

Condition: good (used), Internal item no.: 26040 Granite surface plate including steel stand + height gauge and stops Manufacturer: Mahr Bdsdpfoy Hp Htsx Aa Deb Accuracy grade 1 / DIN 876 Dimensions (LxWxH): 620 x 400 x 80 mm Height on steel stand: approx. 800 mm

Condition: new, Sheet width 3100 mm sheet thickness 10 mm cutting angle 2 ° Hold down 14 pieces Stroke rate 13 strokes/min throat 350 mm Oil capacity 260 l Control CYBELEC CybTouch 8 Total power requirement 22 kW Bedjk Tzztopfx Aa Dodb Machine weight approx. 10.550 kg space requirement approx. 4000x2250x2050 mm Equipment: - Hydraulic swing cut plate shear - touch screen controller with digital display for backgauge - automatic cutting gap adjustment via controller - backgauge control 1000 mm travel with ball screws - Swing cut machine with cutting gap adjustment - 2 backgauge arms - 1 side stop - light barrier behind the machine - cutting length limitation - cutting line illumination - chrome steel knives - ball rollers in the table - hinged finger guard with limit switch - foot switch - CE-sign / declaration of conformity - Operating instructions in German

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Bodpfjxu Nc Iex Aa Dedb Machine weight approx.: 10,100 kg

Year of construction: 2022, condition: used, The panel swivel fix facilitates handling when moving panels from a vertical to a horizontal position. The support frame is hydraulically height-adjustable and also pivots. Support rollers facilitate horizontal movement. Four swivel casters ensure safe movement. Technical data: Support height: • Vertical approx. 340-120 mm • Horizontal approx. 1200-890 mm Max. panel size: 5200 x 2100 mm Load capacity: 250 kg Bedsv T Ilvspfx Aa Dsdb Storage location: Bad Wimpfen

Condition: used, available at short notice Bdjdsx H Svwopfx Aa Dsb

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, Bsdpfeyuty Sjx Aa Dedb without warranty or guarantee

Condition: used, Dividing Head Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Bsdpfx Aoy E T Dgsa Dodb Good condition

Condition: used, Year of construction: 2011, Format: 930 x 1140 mm Equipment: Thermal-CTP 2 laser heads Gen II, ( with 64 Laserdiodes) Class 160 Resolution: 2540 dpi, SCL Single Cassette Loader Productivity option = 21 plates/h. Bdsdpfox U Dnhex Aa Djb

Condition: used, Year of construction: 2010, Format: 830 x 660 mm Bjdpfxjyxquis Aa Dsdb

Condition: used, Year of construction: 2000, table width: 2,700 mm, table length: 3,300 mm, total length: 3,800 mm, total width: 1,000 mm, total height: 2,700 mm, overall weight: 1,500 kg, No. 3272 Bdjdoy E N Izopfx Aa Dsb Perforated plate press Hess JULIA Used, year of construction 2000 Dimensions of the perforated plate 3300 x 2700 mm LW 4 manual hydraulic cylinders (2 in need of repair) 12 pneumatic cylinders (2 magnetic and with angle adjustment) Transport dimensions approx. 3800 x 1000 x 2700 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location