Used Manual Bending Machine for sale (73,899)

Condition: new, Year of construction: 2025, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max pipe bending range up to 30 mm. The bending machine allows working both vertically and horizontally. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal Driver's manual in Polish CE declaration Technical data Round tube [mm] 30 x 1 Rectangular profile [mm] 30 x 30 x 1 Round bar [mm] 16 Solid rectangular piece [mm] 30 x 10 Shaft diameter [mm] 30 Rotation [rpm] 9 Motor power [kW] 0.75 kW Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 1200 x 750 x 1210 Weight [kg] 252 Ihjdsu Snlkjpfx Ah Nst

Condition: new, Year of construction: 2025, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Very high empty weight for optimum stability during operation. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max. pipe bending range up to 70 mm. Machine characteristics Bending radius adjustable by means of upper clamping device with vernier scale. Application: Bending of profiles and pipes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Left/right-hand operation Standard equipment Side guide rollers foot pedal/ universal rollers Driver's manual in Polish CE declaration Technical data Round tube [mm] Ø 70 x 2 Rectangular profile [mm] Ø 60 x 60 x 3 Round bar [mm] Ø35 Solid rectangular bar [mm] Ø 35 x 35 Shafts diameter [mm] 50 Motor power [kW] S1 1.5/ S6 2.2 Power supply 3 phase, 400 V Ijdpju Snkgsfx Ah Nsht Dimensions (L x W x H) 900 x 850 x 1700 Weight [kg] 550

Condition: new, Year of construction: 2025, Accurate and efficient industrial bending machine for bending steel, copper, aluminum and brass pipes. The ability to select the optimal bending radius allows for high-quality results without deforming the material. The presented bending machine is very easy to use. Pipe benders are devices used in individual and small-series production of parts in the automotive, furniture, architecture or garden tool industries. The main bending die is driven by a reduction gear, an electric motor. The device can work in two modes: manual and semi-automatic. The simple and durable design ensures long-term, trouble-free use and guarantees ease of use. Standard equipment digital reading of the bending angle The BENDMASTER machine is equipped with dies for pipes with a diameter of: 38.1; 48.3; 70 mm Ihodpfovugv Ajx Ah Not Technical data MAXIMUM DIAMETER OF BENT PIPE 70x5 mm MAXIMUM DIMENSION OF BENT SQUARE PROFILE 50x50x2 mm MAXIMUM BENDING ANGLE 270° DIE ROTATIONAL SPEED DURING BENDING 1.2 rpm DIE ROTATIONAL SPEED DURING RETURN 2.4 rpm MAIN MOTOR POWER 5 kW EXTERNAL DIMENSIONS OF THE DEVICE 1300x700x900 mm WEIGHT 680 kg For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Very high empty weight for optimum stability during operation. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max. pipe bending range up to 50 mm. The bending machine allows work in both vertical and horizontal planes. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Ihedpfx Ahju Snm Ie Nst Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers foot pedal various roller sets DTR in Polish CE declaration Technical data Material: round tube [mm] 50 x 2 Material: rectangular profile [mm] 50 x 50 x 2 Material: round bar [mm] 35 Material: solid rectangular piece [mm] 35 x 35 Diameter of rollers [mm] 40 Motor power [kW] S1 1.5 / S6 2.2 Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 900 x 850 x 1700 Weight [kg] 485

Condition: used, Year of construction: 2001, Technical details: Ihsdpou Ibvhjfx Ah Nst tube diameter: 74 mm wall strength: 5 mm tube diameter min.: 10 mm tube diameter max.: 74 mm round material: Stahl max: 40 mm control: Trumpf-Rohrtechnik IsoBend 2.0 bending radius max.: max: 300 / min: 65 mm bending angle max.: max: 195 / min: 0,1 ° bending speed: (°/s): 90 / (°/s²): 190 °/s tube pipe draw up length: 3000 mm work pressure of hydraulic: Betriebsdruck max: 300 bar total power requirement: 43 kVA weight of the machine ca.: 8,5 t dimension machine xH: 6,5 x 1,6 x 1,6 m dimension control panel: 0,8 x 0,6 x 1,4 m It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrous metals. Due to the cross slide of the bending head, the following advantages can be listed: -free programmable X and Y axes -level change cross slide: tical travel = 300mm (vert. position freely programmable) and max. horizontal movement 350mm -Bending forms of different sizes within a stack of bending forms can be approached as required. The bending direction is to the right. Control software Trumpf-Rohrtechnik IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Slide rail (speed max. 362mm/sec. and acceleration max. 1100 mm/sec.) i.D. *

Condition: used, Year of construction: 2004, Technical details: tube diameter: 20 mm bending radius max.: 100 mm control for program: S7-300 tube pipe draw up length: 2270 mm air pressure - required: 7 bar total power requirement: 15 kW Bending speed: 540 °/sec control voltage: 24 V / DC V connection voltage: 400V / 50Hz / 3 Ph V dimensions L x W x H: Biegeaggregat: 1,8 x 1,4 x 1,6 m dimensions L x W x H: Zuführung: 1,2 x 1,5 x 1,55 m dimension machine xH: 3,0 x 1,0 x 1,2 m Mandrel tube bending machine Bending direction RIGHT Operation via SIMANTIC Panel PC control unit Pneumatics: Pressure 7 bar; flow rate 200 l/min. Hydraulics: Pressure 150 bar; flow rate 6.8 l/min. Equipment/Accessories: -oil drip tray 3.1 x 0.96 x 0.02m -Spare parts and accessories * Ihsdpfx Aju Ibzkeh Not

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Ihedpfx Aou Ibvueh Njt Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: used, Technical details: sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend Ijdpfx Aju Icdyjh Njht -Verstellweg ca. 5mm *

Condition: used, Technical details: sheet width: 2300 mm plate thickness: 6 mm bending capacity max. - round: nicht bekannt mm distance between columns: 3210 mm roll dia. top roll: Ø 190 mm side roll diameter: Ø 150 / 2 Stück mm dimension machine xH: 3,55 x 1,2 x 1,6 m weight of the machine ca.: 2,3 t total power requirement: 9 kW Steel frame double T beam welded top roller: with running; adjustment= length 150mm via hand toggle; support block can be folded out for opening Ihedpfx Aou Icd Tjh Nst side rollers: motor driven; adjustment=fixed *

Condition: used, Year of construction: 1992, Technical details: tube diameter: 6 mm tube diameter max.: 16 mm bending angle max.: 90 ° electrics - voltage/frequency: 220 / 50 V/Hz Total power requirement: 0,75 kW Weight approx.: 0,145 t machine dimensions LxWxH: ca. 1,0 x 0,8 x 1,2 m Application: Mini tube bending machine with free bending head. Processing of precision steel tubes according to DIN 2391/C, material 35.4 NBK Ø 6 - 16mm. -With hydraulic drive -8-fold bending preselection angle up to 180 -Pipe stop length 1m -Emergency stop button -mobile with parking brake -pivoting pipe head (vertical in horizontal position) -required hydraulic oil = approx. 20 liters (e.g. Esso Nuto 32) Accessories: Ihsdpfx Ajwivn Noh Not various bending tools *

Condition: used, Technical details: bending angle max.: 0 - 225 ° operating voltage: 380 V revolutions per minute: 5 -16 U/min Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! * Ijdpfx Ajx Adbnjh Njht

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds Ijdpfx Aoxu Dxqjh Nsht -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Ijdpfxou Ibu Rj Ah Njht Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm -13 holes of size Ø 48mm Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough *

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Ihodpfx Aju Ibyyeh Net Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. The bending machine is movable/adjustable. Equipment/accessories: 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

Condition: used, Year of construction: 1981, Technical details: work height max.: 1100 mm voltage: 380 / 50 V total power requirement: ca. 15,1 kW Ihedpfx Ahowh Rq No Not weight of the machine ca.: 4,5 t dimensions electric cabinet LxWxH: 1,2 x 0,64 x 1,4 m dimension machine xH: 1,5 x 1,6 x 1,3 m The profile round bending machine can be used for bending thick-walled steel profiles, steel beams and steel rails. The machine works on two gears: 0-4 rpm and 0-6,5 rpm. - 1x driven bending roller can be adjusted vertically by 140mm and - 2x drive rollers with centre distance 360mm - Right and left rotation of the rollers possible Equipment: - Hydraulic power unit, manufacturer TOS - control panel accessories: - various bending rollers without profile *

Condition: used, Year of construction: 1960, Technical details: sheet width: 2000 mm plate thickness: 4 mm Ihjdju Icfwjpfx Ah Not distance between columns: 2070 mm roll dia. top roll: Ø142 (getrieben) mm diameter of lower rolls: 1. Walze Ø 145 (getrieben) mm diameter of lower rolls: 2. Walze Ø 145 (mitlaufend) mm adjustment of lower rolls: manual/mech./hydr.: 1. Walze ca. 20 mm von Hand adjustment of lower rolls: manual/mech./hydr.: 2. Walze ca. 180 mm von Hand height over floor: 950 mm total power requirement: ca. 4,0 kW dimension machine xH: 3,0 x 1,0 x 1,2 m weight of the machine ca.: ca. 2,5 t Mechanical 3-roll plate bending machine Operation: Hand switch / foot switch forward/backward 2x EMERGENCY button *

Condition: good (used), Year of construction: 2000, 1 used 4-roll sheet metal bending machine Brand: Stöting Type: VB 322 Serial number: 1591 Year of manufacture: 2000 With Acon control system Working length: 1000 mm Maximum sheet thickness: 12 mm Bending capacity: 8 mm Top roll diameter: 250 mm Bottom roll diameter: 210 mm Side roll diameter: 169 mm Dimensions: L: 3200 mm Ihodpov Ibkbefx Ah Njt W: 1370 mm Height (without support arm): 1370 mm Drive power: 6.5 kW Weight: 3.2 tons

Condition: refurbished (used), Year of construction: 1986, roller (bottom) diameter: 165 mm, roller (top) diameter: 190 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, 3-rolls bending machine, overhouled, bending length 2050 mm, capacity 6 mm, top roll Ø 190 mm, replacement top roll Ø 120 mm, bottom rolls Ø 165 mm, motor 3,7 KW, dimension 250x120x165 cm, weight ca. 1800 kg Iodotwnw Repfx Ah Noht

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 1,020 mm, folding beam adjustment: 46 mm, bending angle (max.): 135 °, overall weight: 340 kg, total length: 1,350 mm, total width: 850 mm, total height: 1,175 mm, Equipment: documentation/manual, Upper and lower blade removable in segments Including manual back stop PNEUMATIC CYLINDER !!! Max. zetcapaciteit over de hele werklength ----- 2.5 mm Max. working length ----- 1020 mm Max. opening width ----- 46 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Max. angle of attack ----- 0 - 135 Weight ----- 340 KG Ihodpfoga T A Dsx Ah Njt Width ----- 1350 mm Depth ----- 850 mm Height ----- 1175 mm

Year of construction: 2026, condition: new, Semi-manual operating Suitable for adhesive labels Ijdpfx Ahsfir Uco Njht Label width: 20-165 mm Label length: 20-200 mm Cylindrical bottle shape only 600 bottle or jars/hourú Dimensions: 530x420x300 mm

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Iedpec Nxwysfx Ah Njht Plate Bending Machine ZGR-1400/1.2mm Technical data: - Maximum working width: 1400 mm - Sheet gauge up to: 1.2 mm (Steel) - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 15 mm - Protractor - Weight: 150 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) - The machine have certificate CE and 12 months warranty. Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Price: 1050 Euro ( VAT excl. ) Contact with what's app We provide invoices with 0% of tax.

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Prod-Masz press brakes - your best choice! Ihsdpfjb Hd Hijx Ah Not High-precision folding machine for steel, copper, zinc and aluminum sheets. These press brakes and all common spare parts are available from stock. Folding bench ZGR-2140L/0.8 the maximum working length 2140 mm the max. thickness of the steel sheet for 0.8 mm roller scissors incl. bending beam 15 mm Bending angle 160 degrees the weight of the handheld machine is about 165 kilograms the cut with the scissors on the whole working length lifting the top beam in three layers The maximum clear width between the beams is 80 mm Rotary shears + 350 euros Crushfolder + 75 euros Shipping costs please ask Delivery possible every week We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery).

Condition: new, Year of construction: 2025, The highest precision of this press brake guarantees and enables the bending of sheet steel up to 0.8mm and for all non-ferrous metals 30% more bending capacity. The Prod-Masz press brakes are characterized by high quality, robustness, optimal functionality and beautiful design! Only high-quality materials are used in the production of the folding bench. Folding machine 3.14m/0.8mm Technical specifications: - maximum working width: 3140 mm - Bending performance: up to 0.8 mm (steel sheet) - Bending angle: max 145 degrees - Bending beam thickness: 24 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Passage opening: 80 mm - degree scale - angle stop - Front and depth stops Iodpfx Ahob Hqa No Noht - Weight: about 400 kg - The cutter (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros - The machine complies with CE guidelines and has a 12-month guarantee. Price: €2050.00 The delivery costs are: PLEASE ASK Cash on delivery and bank transfer in advance Delivery within 1 week from order date We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640.-0.8 is a sensational machine for precision bending of all types of metal sheets (steel 0.8mm, titanium zinc 0.8mm, aluminum of 1.2 mm, copper sheet 0.65 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Ihjdpfxjc Nwd Ae Ah Not Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard.

Condition: new, Year of construction: 2025, ZGR-2140/0,8 with transport wheels Ihodpockm Hmofx Ah Njt Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,5 mm Cooper plate 1,25 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty The price excludes Vat – it applies only to registered companies with an European Vat Id. In order to receive 0% Vat price, you must send us full company details (full name address with postcode and a Valid European Vat ID)