Used Manual Bending Machine Pan for sale (106,709)

Year of construction: 2010, condition: ready for operation (used), This PROMAU MCA 2017 roll bending machine was manufactured in 2010. It features a plate width of 2050 mm, rolling thickness up to 6 mm, and pre-bending thickness of 5 mm. Equipped with a centralized control console, hydraulic drive on side rolls, and a full safety system, it ensures precision and safety. Consider the opportunity to buy this PROMAU MCA 2017 roll bending machine. Contact us for more information. Application Types Iedpfsxirkdjx Afistn Bending

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 65 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 sets of dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, according to required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo motor-driven feeding axis • Servo motor-driven rotation axis • Servo motor-driven bending axis • Servo motor-driven H and V axes • 21” TFT touchscreen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of working material length • Calculation of estimated bending time • Conversion from X-Y-Z to Y-B-C • Mobile foot pedal with emergency stop feature • Remote assistance • Bending with or without mandrel • Safety plate behind the bending head • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear slide system • Hydraulic claw clamp • Electrical panel safety lock and main switch panel lock • Electrical system cooler • Overload protection • Automatic dispatch of detailed operation reports OPTIONAL EQUIPMENT (Not included in price) • Additional die sets • Safety mat (750 x 1000 mm) Isdoxircgopfx Afijtn • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Additional mandrel length (up to 6 m, priced per meter) • Ball mandrel and wiper die set • Automatic mandrel lubrication system (for suitable tube diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC/5 AXIS Maximum capacity mm: Ø65x3mm Maximum bending radius mm: 250mm Maximum bending angle °: 190° Hydraulic pressure bar: 50-200 Working length mm: 3000 Rotation tolerances: Adjustable Bending power kW: 22.5 Dimensions LxWxH mm: 6350x1400x1600 Weight kg: 3950

Condition: new, neu Itjdpoxh Rulofx Afion ca. 4 Wochen ab Auftragse Italien 20830 € 399.94 € 40 to 250 mm 200 x 20 mm 1100 x 620 mm 55 mm 4,7 - 9,1 mm/s 45 mm/s 45 l 3 kW 950 mm 1250 mm 900 mm 1000 mm 750 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Version with CNC control

Condition: like new (used), functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 118 mm, overall weight: 220 kg, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, NEW!!! LFSS PK 30 Profile bending machine, pipe bender 30mm /ct2275/ Manufacturer: LFSS Type: PK30 Year of manufacture: 2025 Horizontal and vertical operation Rollers: 2 driven Upper roller up-down movement manually Max. shaft diameter: 30 mm Working speed: 4 m/min Bending capacity: - Flat steel: 50 x 10 mm - Square 35 mm - Closed section: 40x 40 mm - Pipe 48 x 3 mm Power: 400 V / 0.75 kW 50Hz Electric foot switch with emergency stop Standard bending set Weight: approx. 200 kg CE certification Instructions in German or English Dimensions: W 700 x H 1450 x D:750 mm Ijdpfxsxh D Nvo Afistn

Year of construction: 2020, condition: used, For sale: Automatic 2D Wire Bending Machine WL-YZ-8K Itjdpfx Aexapv Sjfisn Designed for processing soft wire with a diameter of 3–8 mm and hard wire of 3–6 mm. Key benefits of the machine: Technical specifications: - 4 axes - Total machine power: 7 kW - Maximum wire feed speed: 60 m/min - Maximum wire feeding deviation (depending on material): ±0.2 mm - Supplied with a wire coil decoiler (coil weight up to 350 kg) - Includes a complete set of parts for processing wire diameters: 3, 4, 5, 6, 7, and 8 mm - Model: WL-YZ-8K - Manufacturer: Hwashi

Condition: like new (used), Year of construction: 2011, operating hours: 200 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 300 mm, workpiece weight (max.): 180 kg, total height: 1,967 mm, type of input current: AC, total width: 981 mm, total length: 1,047 mm, travel distance X-axis: 410 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 310 mm, overall weight: 410 kg, input voltage: 230 V, table width: 624 mm, table length: 805 mm, table load: 180 kg, compressed air connection: 4 bar, ambient temperature (max.): 30 °C, ambient temperature (min.): 15 °C, Equipment: documentation/manual, type plate available, Coordinate Measuring Machine Mitutoyo Crysta-Plus M443 with HP workstation and monitor Year of manufacture: 2011 Very little used, excellent condition Thanks to the built-in thermal error compensation, the Crysta-Plus M443 can be used outside thermally stabilized measuring rooms, in a temperature range from 15 to 30 °C. X-axis: 400 mm Y-axis: 400 mm Z-axis: 300 mm Accuracy according to ISO 10360: E = 3 + 0.4 L/100 µm within a temperature range of 15 to 30 °C Resolution: 0.0005 mm Probe head: Renishaw MH 20i+PS12R Measuring table: Granite 624 mm x 805 mm Pneumatic axis clamping for each axis, can also be operated via footswitch Workpiece clamping: Threaded insert M8, 13 positions Distance between columns: 625 mm Maximum workpiece height: 400 mm Maximum weight: 180 kg Itsdpfx Ajxmhw Ijfijn Machine weight: 480 kg Recommended installation area (incl. PC): 2.5 x 2.5 m Extensive accessories, e.g., probe heads, master ball

Condition: ready for operation (used), A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible. Ijdpfx Afexl Up Ueijtn

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, pipe diameter (max.): 51 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, Equipment: CE marking, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 Sets of Dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, as per required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo Motorized Feed Axis • Servo Motorized Rotation Axis • Servo Motorized Bending Axis • Servo Motorized H and V Axes • 21” TFT Touchscreen Mobile CNC Control Unit • Rolling capability • 3D Bending Simulation • Collision Simulation • Daily, Weekly, and Monthly Total Operating Status Reports • Calculation of Workpiece Material Length • Calculation of Estimated Bending Time • X-Y-Z to Y-B-C Conversion • Emergency Stop Foot Pedal with Mobile Function • Remote Assistance • Mandrel Bending and Mandrel-less Bending • Safety Plate behind Bending Head • Hydraulic Clamping • Hydraulic Mandrel • Hydraulic Support • Hydraulic Linear Guide System • Hydraulic Chuck Clamp • Safety Lock on Electrical Cabinet and Keyed Panel Lock • Electrical System Cooling Unit • Overload Protection • Detailed Operation Report Automatically Sent OPTIONAL EQUIPMENT (Not Included in Price) • Additional Sets of Dies • Safety Mat (750 x 1000 mm) • Safety Mat (1000 x 1500 mm) • Hydraulic Oil Heater • Additional Mandrel Length (up to 6 m) – per meter • Ball Mandrel and Wiper Die Itsdpfexircajx Afijn • Automatic Mandrel Lubrication System (for suitable tube diameters) • Hydraulic Oil Cooler CAPACITY MB-51 CNC/5 AXIS Maximum Capacity mm Ø51x3 mm Maximum Bending Radius mm 250 mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50–200 Working Length mm 3000 Rotation Tolerances ±0.1 Bending Speed kW Variable LxWxH mm 6350x1400x1600 Weight kg 3750

Condition: like new (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 956158, control type: manual, number of rollers: 3, shaft diameter: 75 mm, overall weight: 1,300 kg, total length: 1,000 mm, total width: 1,130 mm, total height: 1,100 mm, power: 4 kW (5.44 HP), input voltage: 380 V, We can offer you a ROUNDO (Sweden) electro-hydraulic profile bending machine Model: R-3 Capacity: 14 cm³ Machine no.: 956158 Delivered to agent: 10-1995 Delivered to customer: 26-07-1996 Dimensions: 1 x 1.13 x 1.1 m Weight: 1300 kg Shaft diameter: Ø 75 mm Motor power: 4 kW - Hydraulic machine - Can operate in horizontal or vertical position - 3 driven rolls Included: Brake motor Push-button control Digital readout 1 extra set of rolls for tube Ø 48 and Ø 42 mm Dutch-language manual Price for the ROUNDO section bending machine, model R-3: on request via email The machine has its original paint and has been used very little! Delivery conditions: Delivery time: available from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that trades and stocks mainly used Kardex Remstar VLM automatic lift (shuttle systems) & rotary storage systems (paternoster systems). See our website for current stock. We assemble and/or dismantle these systems safely with VCA-certified technicians and have been doing so for over 33 years. Itsdpfxexl Sq Ao Afijn We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, actuation type: electric, roller diameter: 90 mm, working width: 1,270 mm, sheet thickness (max.): 3 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), input voltage: 400 V, rotational speed (max.): 6 rpm, type of input current: three-phase, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, sheet metal roll bending machine BOLUK BM 1270 x 90 - 2.5 mm NEW! for sale. manufacturer: BOLUK 1270X90mm year of manufacture: 2024 Bending Length: 1270 mm Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Manually adjustable rear roller - Mobile control panel with foot pedal - Precision bending with brake motor - Conical bending device - Manually foldable end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Machine dimensions 1850x700x1200 mm Weight 520 kg Itedpfxjxhub Aj Afien

Condition: used, Year of construction: 2001, Technical details: tube diameter: 74 mm wall strength: 5 mm tube diameter min.: 10 mm tube diameter max.: 74 mm round material: Stahl max: 40 mm control: Trumpf-Rohrtechnik IsoBend 2.0 bending radius max.: max: 300 / min: 65 mm bending angle max.: max: 195 / min: 0,1 ° bending speed: (°/s): 90 / (°/s²): 190 °/s tube pipe draw up length: 3000 mm work pressure of hydraulic: Betriebsdruck max: 300 bar total power requirement: 43 kVA weight of the machine ca.: 8,5 t dimension machine xH: 6,5 x 1,6 x 1,6 m dimension control panel: 0,8 x 0,6 x 1,4 m It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrous metals. Due to the cross slide of the bending head, the following advantages can be listed: -free programmable X and Y axes -level change cross slide: tical travel = 300mm (vert. position freely programmable) and max. horizontal movement 350mm -Bending forms of different sizes within a stack of bending forms can be approached as required. The bending direction is to the right. Control software Trumpf-Rohrtechnik IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Slide rail (speed max. 362mm/sec. and acceleration max. 1100 mm/sec.) Iodpfju Ibvhex Afiotn i.D. *

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 10,000 kg, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 120 mm, feed length Y-axis: 200 mm, feed length Z-axis: 170 mm, GB-A1500 Fully automatic high-speed bending center Bending length (mm): 1500 Bending height (mm): 4side160 4side170/2side350 4side350 Minimum molding size: (Fold 4 sides) (mm) 4 sides 160: 350*250 4 sides 170/2 sides 350: 350*250 4 sides 350: 350*250 Maximum bending size (mm) 1500*1500 X-axis travel: 120 Y axis travel: 4 sides 160: 200 4 sides 170/2 sides 350 305 4 sides 350: 305 Z-axis travel: 4 sides 160: 170 4 sides 170/2 sides 350: 357 4 sides 350: 357 Pressing knife height: 4 sides 160: 177 4 sides 170/2 sides 350: 177 4 sides 350: 357 Number of axes: suction cup: 11 Pressure arm: 14 Machine power (KW) suction cup: 34.7 Pressure arm: 36.35 Maximum bending thickness of aluminum plate (mm): 3 Maximum bending thickness of iron plate (mm): 2 Maximum bending thickness of stainless steel (mm): 1.5 Maximum bending speed (s/knife) : 0.2 Overall dimensions (mm) long Ijdpfxsv Ikvgs Afietn (front) 4 sides 160: 1890 2-4 sides 350 suction cups: 1890 2-4 sides 350 pressure arm: 1890 Width (side) 4 sides 160： 3300 2-4 sides 350 suction cups：3536 2-4 sides 350 pressure arm: 4127 4 sides 160: 2666 2-4 sides 350 suction cups: 2946 2-4 sides 350 pressure arm: 2946 Weight (approx. kg) 4 sides: 160 2-4 sides 350 suction cups: 10000 2-4 sides 350 pressure arm: 10000 1) Machine frame is heaviest welded con struction,stess released by annealing process,this has minimized deflection of the frame. 2) Y Axis full closed loop control 3) Proportional hydraulic compensation system to prevent deformation 4) German HEIDENHAIN linear encoder 5) Taiwan HIWIN ball screw and linear guide rail ,high performance AC Japanese Yaskawa AC servo motors and drives 6) Rich functions CYBELEC/DELEM professional control system 7) Electro-hydraulic servo synchronization module and Greman BOSCH pressure module 8) +/-0.01mm repeat accuracies 9) +/-0.01mm parallelism accuracies

Year of construction: 2024, condition: new, 1050 mm 5,5 mm 5,0 mm roll diameter 130 / 195 mm 2,2 kW Itsdpfx Afjq Sz Ahsisn 1050 kg 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: refurbished (used), functionality: fully functional, Year of construction: 2006, control type: PLC-controlled, degree of automation: semi-automatic, pipe diameter (max.): 60 mm, mandrel length: 6,000 mm, year of last overhaul: 2025, Equipment: CE marking, emergency stop, Mandrel Bending Machine S6006 ----- For producing dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 60.3 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60.3 x 2.6 mm (stainless steel) → Total connected load 5 kW → Tube feed length 6 m Robust and durable steel construction with a force-locked design—no torsion-prone structure such as a separated construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control system's touch display enables easy and intuitive programming and operation of the machine. After the tube is loaded, it is fixed by a chuck on the carriage. This ensures precise positioning of the tube, allowing the creation of dimensionally accurate geometries. Standard equipment also includes geometry verification before the bending process: If the bending process is started from the wrong position, the machine will not allow it. This prevents incorrect operation. Optional additional features offer more convenience and increase output and thus the efficiency of the system. Data transfer from the optional TBS-3D tube calculation software (PC version) is done via USB stick or via FTP access from the computer to the machine control. USB or LAN connector (RJ45) are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis 2.2 kW → Rotation speed 2.9 rpm (=17°/s) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1 mm → Electronic torsion measurement ±0.1° → Manual stop system (length overtravel stops) → Manual indexing system (15° increments for torsion) → Three-jaw chuck to clamp the tube in the carriage → External control panel PLC Control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot switch operation → Data transmission via (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. The control system calculates the feed and bending angle directly after entering length and angle values. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure Itodpew Sr Ucofx Afisn → Programmable early mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + torsion) → Mobile version (with castors) → Radius extension Sample image shows a similar machine

Condition: used, functionality: fully functional, Bariola press brake 3050 x 100 ton CNC ESA Itsdpfxsxlr Uho Afien Model PBI 100/30NCS Distance between uprights: 2600 mm Stroke: 150 mm Weight: 7000 kg With compensation table Used machine Internal code: SVR 360

Condition: excellent (used), Year of construction: 2021, Segmented sheet metal bending machine for up to 2 mm thickness, length 1370 mm. Isdpfx Afsxlqyceijtn

Condition: good (used), functionality: fully functional, total length: 2,500 mm, Three-roll plate bending machine Motor-driven Max. sheet width: 2500 mm Max. sheet thickness: 4 mm Length of bending rolls: 2550 mm Upper roll diameter: 134 mm Lower roll diameter (each): 125 mm Iedpfsxln Ahsx Afiotn Sturdy design, good condition Ready for immediate use

Year of construction: 2019, condition: like new (used), functionality: fully functional, Jutec 5045 Pipe Bending Machine – Like New – Half Price! For sale: Jutec 5045 semi-automatic pipe bending machine, year of manufacture 2019, used only for a few months. The machine is in almost new condition and immediately ready for operation. Location: Tatabánya, Hungary Price: HUF 10,000,000 net (approx. €25,000) – around half of the original price! Technical specifications: Model: Jutec 5045 Type: Electromechanical, semi-automatic pipe bending machine Capacity: Ø 6–50 mm pipes Suitable for tight bending radii, high precision Automatic central mandrel lubrication with minimal lubricant consumption Pneumatic valve control Spindle-driven frame adjustment Tooling included: • Ø 33.7 mm pipe, bending radius R = 70 mm • Ø 42.4 mm pipe, bending radius R = 90 mm Condition: Hardly used, like new Fully operational and immediately available Regularly serviced, stored in a dry indoor environment Isdpfx Aexliuxsfietn Viewing by appointment. Exchange or trade-in may be considered.

Condition: used, pressure 32 t stroke 250 mm table-size 500 x 760 mm work height max. 925 mm bending speed max. 25 mm/sec Ijdpfx Afegvkigjiotn tank capacity 80 l Pressure power 320 bar total power requirement 5,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,3 x 0,5 x 1,3 m ding height: 200 mm Cutting capacity max. (St): 150 x 14 Punching capacity max. (St) Ø 35 Guide height: 200 mm

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel Itsdpfx Aettah Refien PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: used, Year of construction: 1996, Universal bending machine Make: Indumasch, model Minibend 20 Year of manufacture: 1996 Technical specifications Brand: Indumasch Model: Minibend 20 Year of manufacture: 1996 Pressing force: 20 t Tool height: 100 mm X-axis stroke: 200 mm Hydraulic drive: 3 kW Connection: 400 V / 16 A Hydraulic oil: Mobil SHC, Capacity 20 L Dimensions: L 1.50 x W 0.55 x H 0.95 m (incl. control) Weight: 500 kg + control unit Iodpfx Aexfr E Hjfijtn Equipment - Tech-In Siemens OP7 control - Various bending tools according to photo - Operating manual All information without guarantee. A powered demonstration is possible at any time in our exhibition hall.

Condition: new, Year of construction: 2023, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 62538, total width: 1,200 mm, total length: 1,500 mm, total height: 170 mm, overall weight: 10,000 kg, sheet thickness aluminum (max.): 2 mm, type of input current: three-phase, For sale is the automatic box bending and panel bending machine shown in the picture. Completely new condition, selling due to lack of use. Very fast and functional bending machine suitable for bending large series of boxes, panels, thin sheets. It has an electric servo drive, so the bending result is fast. Use: for bending wardrobes, kitchen appliances, electrical cabinets and other thin sheets. Itsdev S Exdepfx Afijn Machine features: -10 axes -Total width: 1500mm -Opening (Maximum height between lower and upper tool) -Bending thicknesses: Steel (dc01): 1.5mm Stainless steel: 1mm Aluminum: 2mm -Minimum bending dimensions for parts 340mmx340mm -Maximum sheet length 1600mm Weight: 10 Tons

Condition: refurbished (used), Year of construction: 1986, roller (bottom) diameter: 165 mm, roller (top) diameter: 190 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, 3-rolls bending machine, overhouled, bending length 2050 mm, capacity 6 mm, top roll Ø 190 mm, replacement top roll Ø 120 mm, bottom rolls Ø 165 mm, motor 3,7 KW, dimension 250x120x165 cm, weight ca. 1800 kg Itjdpstwnw Rsfx Afion

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Itodpfxjgvkmre Afijn Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage Isdstr U Hlspfx Afietn → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg