Used Manipulator for sale (308)

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,860 mm, total length: 2,800 mm, total height: 910 mm, overall weight: 600 kg, input current: 16 A, warranty duration: 12 months, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRM FULL Manufacturing year 2025 - brand new We manufacture glass cutting tables in various equipment configurations. Our products are characteristic for top functionality and service life because we processed flat glass and we know what customers expect from these machines. Our tables have been operating for a few years in glass processing plants on 3 continents. Our long-term experience enables us to design a machine whose functionality and quality satisfies the needs of our customers to the fullest extent. TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement - 4 adjustable feet for levelling the table in the operation place Dlodod Tamdepfx Ab Toa - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - 2 steel panels screwed beneath facilitating loading by means of a forklift - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 600 kg - top surface size: 286 cm x 186 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish and in English) This product is supplied ready for operation. Our company can also deliver the table within the EU and to other countries.

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Djdpfx Abexvbw He Tsla Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 1750851, load capacity: 100 kg, Dalmec manipulator with vacuum generator and column. Dismantled from an unused production line, in perfect condition. Tested, fully functional, practically new. Working range: 2,530 mm Vertical lift: min. 950 mm, max. 1,850 mm (lower edge of flange) Load capacity: max. 100 kg Dledpfx Abexxbczo Tja Manipulator weight: 450 kg + column

Condition: refurbished (used), Year of construction: 2008, operating hours: 20,000 h, functionality: limited functionality, total length: 12,000 mm, total width: 11,000 mm, input voltage: 400 V, pressure: 8 bar, air pressure: 8 bar, input frequency: 50 Hz, type of input current: three-phase, power: 60 kW (81.58 HP), Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Dljdpfxoxxaite Ab Tja

Year of construction: 2015, condition: used, Used machine Year of manufacture: 2015 Special feature: was a demonstration unit from Holz-Her and only went into production operation with the machine in 2019 Equipment and technical data: - 30% to 50% space savings - Minimum gap between stacks (from 70 mm) = optimal space utilization - Panel damage excluded, panel separation control with weight measurement - Fully automatic operation (inbound/outbound storage) as well as automatic loading of the machine - Adaptable for all panel formats (1.2 to 5.6 m) depending on options - 90° rotation of panels - Low overall height of the manipulator - External dimensions: - Length: 8.5 m - Width: 7.5 m - Minimum panel size: 1.2 x 0.6 m - Maximum panel size: 3.2 x 2.1 m - Maximum lifting weight: 150 kg - Stack height 1.8 m up to max. 2.0 m - Maximum lifting height: 2.1 m - Travel speed: - Horizontal approx. 120 m/min - Vertical approx. 45 m/min - Manipulator suitable for slightly air-permeable, smooth materials such as coated chipboard, blockboard, raw MDF, raw HDF, raw chipboard (good quality) - Upgrade: Vacuum capacity for suction units on the manipulator 100 m³/h for a material mix in the warehouse such as MDF and raw chipboard - Connected load 6 kW - Portal bridge with vibration dampening, manipulator head with lifting device as well as gripper arm made of steel, space-saving due to low design height Articulated arm design with direct drive via steel band thus wear-free and vibration-resistant - Electronic panel position measurement - Panel rotation correction: The panels are measured with sensors and stacked accurately - Separation system for thin panels via integrated weight measurement - Inbound and outbound storage position Dodpfx Aowkbagsb Tola - Direct loading onto the machine - Warehouse management software Previous list price: €110,000.00 Availability: short-term Stock location: Flörsheim

Condition: used, functionality: fully functional, Year of construction: 2016, Glas robot - StarkeArvid KS Robot 280kg Manipulator for glass, windows, sheet metal - lift, crane - StarkeArvid KS Robot 280kg Dlsdpfx Aoxwzm Deb Tja - maximum load capacity 280 kg - one automatic extension - rotation - 4 suction cups - electric driving - control via cable remote control - two batteries (24V) - integrated charger Tilt the suction device 50° backward / 100° forward Side shift 100 mm Charging current 230 V Cetek battery charger, integrated export price possibility of transport (only after inspection or payment) - condition as in the pictures / fully work (I can send video on whatsapp) Price to export (you need active EU VAT number) You can see this lifter in Poland - Piwniczna Zdrój - 120km from Krakow

Condition: ready for operation (used), Year of construction: 2004, operating hours: 10,000 h, load capacity: 360 kg, arm reach: 3,076 mm, controller manufacturer: KUKA, controller model: KRC2, teach pendant model: KCP2, The KUKA KR360 L280 is a high-performance 6-axis industrial robot designed for heavy-duty applications. With a 280 kg payload and 3076 mm reach, it is ideal for: Djdpfjxt Nawox Ab Tola Material handling – palletizing, loading/unloading, and large part transfer Welding – precise and stable spot or arc welding of large structures Machining – milling, grinding, and cutting with high rigidity Assembly – handling and positioning of large components Foundry and automotive – suitable for casting, mold handling, and car body assembly Model: KR360 (L280) Payload: 280kg or 360kg Arm Reach: 3076 mm or 2826 mm Condition: Tested Controller Cabinet: KRC2 Year 2004 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N Dlsdpsxvbu Eofx Ab Tea load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.

Condition: new, Year of construction: 2023, SPR type is the most popular and preferred line of our manipulators by customers. By moving the axis of rotation of the arm above the surface of the mounting plate, the weight of the support arm counterbalances the welding element. This technical solution gives a clear advantage over the PX and BE series. It allows for flexible positioning of the welded element (even "upside down"). STANDARD VERSION: Three-phase powered positioner Arm rotation using a hydraulic rotator Table rotation using an electric rotator Height adjustment of the arm using hydraulic cylinder Control of functions on the positioner case ADDITIONAL OPTIONS: Wired remote control Wireless remote control Pedal on the table rotation cable Smooth table rotation adjustment Djdpfenqzm Dex Ab Tjla Rotation negative clamp (positioner case) Length and shape of the arm Possibility of individual configuration of the positioner Control of functions using a teach pendant

Year of construction: 2002, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters Dsdpfx Aoxr Avpeb Tela - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Condition: good (used), functionality: fully functional, - During the pressing cycle, it allows filling of an additional chamber - Option to connect additional pressing chambers to increase the press capacity or for direct sorting of various types of material - Safe operation - Compact design - High compression ratio Technical specification: Dljdexu U Ipjpfx Ab Tea Weight: 555 kg Machine dimensions: 2000x850x1950 mm Filling hole dimensions: 750x550 mm Pressing chamber dimensions: 750x550x900 mm Filling height of pressing chamber: 1250 mm Pressing chamber volume: 0.4 m³ Bale size: up to 100 kg Hourly throughput: up to 300 kg Number of tying points: 3 Cycle time: 30 s Power supply/Voltage/Fuse: 1.5 kW/1x230 V/16A C

Condition: used, High-capacity funicular mounted on a MAN 6x4 chassis truck Dledpfjt Nf Ipsx Ab Tea - Maximum working length, line of 2,000 m - MAN 400 CP truck chassis - 12 m tower equipped with 6 hydraulic anchors - Possibility of mounting the funicular in the lower position (valley) or in the upper position (mountain), in other words, the funicular can pull logs from top to bottom or from bottom to top - Trolleys with 50 m cable reserve (for easy manipulation), verbally activated with remote control station + 2 additional Trolleys - Various spare parts - The machine is registered in Romania and can be driven on public roads - Good working condition. It was used very little. Purchased from the Austrian Forestry Directorate. Installation in very good working condition. Belwo you can find our offer for VOLVO L180E. For this machine, no professional description is needed, as you can see all the details in the attached photos.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 10,000 h, load capacity: 360 kg, arm reach: 3,326 mm, controller manufacturer: KUKA, controller model: KRC2, teach pendant model: KCP2, The KUKA KR360 L240 is a high-performance 6-axis industrial robot designed for heavy-duty applications. With a 240 kg payload and 3326 mm reach, it is ideal for: Material handling – palletizing, loading/unloading, and large part transfer Welding – precise and stable spot or arc welding of large structures Machining – milling, grinding, and cutting with high rigidity Dodjxt I D Ijpfx Ab Tola Assembly – handling and positioning of large components Foundry and automotive – suitable for casting, mold handling, and car body assembly Model: KR360 (L240) Payload: 280kg or 360kg Arm Reach: 3326 mm or 2826 mm Condition: Tested & Painted Manipulator: Year 2004 Controller Cabinet: KRC2 Year 2004 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: R14101358 (Roboter) / E14130752 (Steuerschrank), overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Year of construction 01.2014 (control cabinet 12.2013). Axes: 6, Reach: 2,655 mm, Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Dedjtk N E Tjpfx Ab Tola Control cabinet: FANUC R-30iB. Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Condition: used, functionality: limited functionality, machine/vehicle number: H2X394U04541, Year of construction: 2007, operating hours: 7,880 h, load capacity: 4,000 kg, lifting height: 4,400 mm, load center: 500 mm, fuel type: gas, motor manufacturer: vw, overall weight: 6,305 kg, Equipment: cabin, fork extension, pallet forks, sideshift, Linde H40T forklift. Valid technical inspection until April 2026. Serial number H2X394U04541. Load capacity 4000 kg. Lifting height 4400 mm. Fork palletizer by KAUP, type 3T429, serial number 268418/2007. Load capacity with manipulator 3003 kg. Side shift. LPG drive. Starts and drives. VW engine needs overhaul. Year of manufacture 2007. DTR documentation. Dedpfoxgt Tbex Ab Tela

Year of construction: 1997, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator Dlsdsxr Avcspfx Ab Toa All technical data for the individual systems can be found in the attached pictures.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 20150236, • The vacuum gripper VM 300/4-90°/90°/PNEU/EL is a handy gripping device that allows you to grip and handle large-format flat loads • Maximum load capacity: 300 kg • Weight: 125 kg Price negotiable. Dodpfx Aoxu U A Hjb Tola

Condition: used, Swiss manufacturer GEMA injection powder coating equipment for sale, manufactured in 2002. It consists of: Dlsdjqlazdepfx Ab Tea Powder coating manipulators (2pcs of 8 nozzles each) for painting parts up to 1800 mm high; Control and programming cabinet for the manipulators; Powder feeding centre; If you have any further questions, we will be happy to answer them.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, load capacity: 360 kg, arm reach: 3,076 mm, Model: KR360 (L280) Payload: 280kg or 360kg Arm Reach: 3076 mm or 2826 mm Condition: Refurbished with 6 months of warranty Manipulator: Year 2004 Controller Cabinet: KRC2 ed05 Year 2007 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant + 1 year warranty As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. Dledpfeq Hd Hrjx Ab Tja

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: R14101361 / E13Z40195 (Steuerung), overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Year of construction 01.2014 (control cabinet 12.2013). Axes: 6, Reach: 2,655 mm, Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Control cabinet: FANUC R-30iB. Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Dodoth Ntujpfx Ab Tola Packaging and loading included.

Condition: excellent (used), Year of construction: 2013, operating hours: 6,100 h, functionality: fully functional, machine/vehicle number: 628413, overall weight: 1,360 kg, KUKA industrial robot KR240 R2900 ultra with control cabinet. Condition: very good (used) Year of construction 07.2013 (control cabinet 2013). Operating hours: 6100 h. Reach: 2,896 mm, Load capacity: 240 kg Serial number: 628413 Dimensions: L180 cm, W 90 cm, H 170 cm . Weight: 1145 kg Control cabinet : Kuka KRC4 Serial number: 322953 Dimensions: L80 cm, W 60cm, H 110 cm . Weight of 165 kg Dsdpeurb Tmofx Ab Tjla (For further details see type plates). Complete with robot manipulator, control cabinet, teach panel, connection cable. Total weight: 1,360 kg We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: R14101359 (Roboter) / E13Z40193 (Steuerung), overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Year of construction 01.2014 (control cabinet 12.2013). Axes: 6, Reach: 2,655 mm, Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Control cabinet: FANUC R-30iB. Dedoth E Stepfx Ab Tola Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: R14102940 / E14130751 (Steuerung), overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Year of manufacture 01.2014 (control cabinet 01.2014). Dljdpfx Abetk Iyao Tsa Axes: 6, Reach: 2,655 mm, Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Control cabinet: FANUC R-30iB. Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: R14102942 / E14130753 (Steuerung), overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Year of construction 01.2014 (control cabinet 12.2013). Axes: 6, reach: 2,655 mm, Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Control cabinet: FANUC R-30iB. Dlodpjth I Hdofx Ab Tea Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Year of construction 01.2014 (control cabinet 12.2013). Axes: 6, reach: 2,655 mm, Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Control cabinet: FANUC R-30iB. Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN Dsdpjtk Nzlsfx Ab Tsla We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.