Used Mandrel Pipe Bending Machine for sale (84,991)

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, total length: 16,800 mm, total width: 6,300 mm, total height: 3,600 mm, working length: 620 mm, Equipment: emergency stop, Fully automatic tube bending and welding machine with solid-state laser Trumpf TruDisk 3002 (6C), for the production of round, oval, polygonal, longitudinally welded tubes. Diameter from 80-400mm, length from 80-620, material thickness 0.8-2.0mm (steel, chrome steel and stainless steel). Further features of the fully automated tube production machine are -Bending station (welding edge bending) Camera-guided welding optics. -seam smoothing to eliminate any height offsets in the weld seam Lasdpou Ut S Ejfx Affsk -Annealing" at approx. 500 °C to optimize subsequent expansion or calibration -Extraction system for welding fumes. -Complete maintenance by the manufacturer. Further machine data can be found in the pictures or under the homepage of weil-technology (solutions/machine-systems/ecostar) The machine can be inspected under power at our Schönauer Straße site in 78737 Fluorn-Winzeln. Dismantling, loading and transportation are to be provided by the buyer.

Condition: used, Year of construction: 1990, pressure ca. 20 t Lajdex E Dt Sopfx Affjk

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Laedpfsx Ii Hvsx Affek Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, "Properties: Bending radii: R10 to R200 (min. R= 1.8xD) (depending on the wall thickness, the material and the pipe diameter) Max. Bending speed: 2 rpm and 3.2 rpm without inverter Operation: NC soft-touch control panel in 8 different languages and foot pedal Number of programs: 30 per 9 bends Control: NC1 Bending direction: counterclockwise Effective length (available in different lengths as required): 1,5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3 m version) Weight: approx. 600 kg (with 3m mandrel) Ledpfx Afouudrkjfeak NOTE: The price quoted refers to a length of 1.5 m. Other lengths available on request! Premature mandrel retraction Positioning and rotation with mechanical stops and precise digital display Pneumatic four-jaw chuck Performance: Hard copper and aluminum : 60 x 4 mm Steel tube : 60 x 3 mm Stainless steel : 60 x 2 mm Scope of delivery: Machine Standard accessories (e.g. foot switch, operating instructions, 2 hex, 4 sets of chuck jaws, bending grease, 25 mm mandrel bar) Delivery without hydraulic oil"

Condition: good (used), Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine Ljdpfjfg Th Aex Affeak -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h Laodexpqy Dspfx Affjk - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: good (used), Year of construction: 2003, machine/vehicle number: 02263, Offer 25492 Technical Data - Upper and lower rollers driven, each roller hydraulically adjustable - Suitable for prebending and conical rolling, side supports can be swung out - Operation via separate control panel with digital actual value display - Max. working width: 2050 mm Lasdpfx Afex H R Rmsfsk - Max. sheet thickness at 400 N/mm² without prebending: 8 mm - Max. sheet thickness at 400 N/mm² with prebending: 6 mm - Bending capacity refers to at least 3 × top roller diameter - Hardened rollers - Top roller diameter: 190 mm - Side roller diameter: 170 mm - Bottom roller diameter: 140 mm - Drive: 400 V / 3.0 kW - Required space: approx. W 3500 x H 1300 x D 1300 mm - Weight: approx. 3200 kg

Condition: used, Year of construction: 2008, functionality: fully functional, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness (max.): 2 mm, sheet thickness brass (max.): 2 mm, sheet thickness copper (max.): 2 mm, Goteneds K25-30 A2 Max długość paska blachy 3100 mm Ledpfew Ea Edex Affoak max grubość (blacha stalowa 2,0 mm) obrotowa belka górna – możliwość zaginania blachy z 4 stron rok produkcji 2008

Condition: excellent (used), Year of construction: 2010, Technical Data: Working width: 6,500 mm Max. bending capacity: 7.0 mm Max. prebending: 5.0 mm CNC control Top roll diameter: 420 mm Diameter of side rolls: 315 mm Diameter of central lower roll: 400 mm Conical bending device via tilting of the two side rolls Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 22 kW Dimensions (L x W x H): approx. 9,200 x 2,350 x 1,900 mm Net weight: approx. 39 tons Additional equipment: Side bending aid Adjustable upper bending aid Condition: Very good condition, little used Operating hours: 100 h Lasdpfx Afex Iitiofok The seller accepts no liability for errors in writing or data transmission. The machine is, in terms of appearance, technology, and wear, commensurate with its age; used machines are sold without any warranty.

Condition: new, sheet width 1250 mm plate thickness 5.5 mm pre-bending 5.0 mm Lsdpfx Aexaacvoffoak roll diam. toproll 140 mm min. dia. 210 mm turning speeds 5.7 U/min engine output 2.2 kW weight 1365 kg range L-W-H 2020 x 900 x 1.200 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: good (used), Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Perthel, pipe bending tool for profile bending machine -Profile diameter: Pipe size 16 - 76 mm / 3/8" to 3 1/4" -Dimensions: 1020/310/H170 mm -Weight: 28 kg Lajdpfx Afogrzuuefsk

Year of construction: 2010, condition: ready for operation (used), This PROMAU MCA 2017 roll bending machine was manufactured in 2010. It features a plate width of 2050 mm, rolling thickness up to 6 mm, and pre-bending thickness of 5 mm. Equipped with a centralized control console, hydraulic drive on side rolls, and a full safety system, it ensures precision and safety. Consider the opportunity to buy this PROMAU MCA 2017 roll bending machine. Contact us for more information. Laedpex D R Rxefx Affjk Application Types Bending

Condition: good (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 874015, Profile bending machine Roundo R3 Lasdsx Hw Eqjpfx Affjk

Condition: used, Year of construction: 2007, functionality: fully functional, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness (max.): 3 mm, sheet thickness brass (max.): 3 mm, Goteneds futura – 20. Max długość paska blachy 2100 mm max grubość (blacha stalowa 3 mm) Ledpfx Afew Eax Defoak obrotowa belka górna – możliwość zaginania blachy z 4 stron rok produkcji 2007

Condition: good (used), Year of construction: 2021, operating hours: 2,789 h, functionality: fully functional, machine/vehicle number: MP_0990, Our good condition salvagnini B3 edge bending machine is for sale. Type: B3.100-3000 Lodpfev Ua Dyox Affoak Country of origin: Italy Weight: 8600 kg Processing range: 3060 mm length Pressing force: 100 tons

Condition: good (used), Stock number: 3054 Manufacturer: Wafios Year of manufacture: 2003 Model: BM3 Wire diameter: 2.0 to 6.0 mm Wire feed length: unlimited Feed speed: up to 80 m/min Distance from feed unit to bending head: min. 235 mm Return stroke length: max. 1,000 mm Bending head stroke: max. 75 mm Laedpex Hrrfjfx Affsk Bending head rotation angle: unlimited Bending head lateral adjustment: +/- 20 mm Bends: max. 60/min Features: CNC control for wire feed and bending Accessories: coiler, various rollers Application: two- and three-dimensional parts Condition: good Connection: 10 kW Weight: approx. 4 t

Condition: good (used), Bending tool, die, lower knife, lower tool, lower jaw -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm Lajdpfx Aecn Shusffsk -Length: 1452 mm -Weight: 10 kg

Year of construction: 2022, condition: ready for operation (used), General Data Lsdpfxjx D Ehxe Affsak Machine weight 4500 Kg This MACRI PROVAR 6-45 U-D was manufactured in 2022. It features a maximum steel bending capacity of Ø 45x4 mm and stainless steel up to Ø 40x3 mm. With a bending angle of up to 190° and speeds reaching 450 mm/sec on the X axis, this roll bending machine ensures precision and efficiency. Consider the opportunity to buy this MACRI PROVAR 6-45 U-D roll bending machine. Contact us for more information about this machine. Application Types Bending

Year of construction: 1982, condition: good (used), Motorized round bending machine FASTI type: 106-20-2 year 1982 Bending capacity : 2040 mm X 2 mm in steel Rollers diameter 110 mm , with bending . Roll drive motorized Rolls adjustment motorized Laodpfx Aek Iymxeffjk Space requirement: 2,5 m X1 m X 1,2 Weight.ca.2000Kg. Machine in Good Condition Undercurrent Demonstratable .

Condition: used, Year of construction: 2005, functionality: fully functional, Goteneds futura – 25. Max długość paska blachy 2600 mm Lsdpfx Aow Ea Apoffjak max grubość (blacha stalowa 2,5 mm) obrotowa belka górna – możliwość zaginania blachy z 4 stron rok produkcji 2005

Condition: good (used), Year of construction: 1991, Offer 23199 Ledpjx E Suqofx Affoak Technical Data - For notching gas, steam, stainless steel, non-ferrous, etc. pipes to weld them together at a 90° angle. Also suitable for double corner joints. - Pipe notching sizes for Ø 27.9 – 34.8 – 42.8 mm - Ø 49.0 – 61.0 mm - Zinc outlet notching for Ø 27.0 – 61.0 mm - Max. pipe wall thickness at 400N/mm² strength: 5 mm - Drive: 400 V / 2.2 kW - Space requirement approx.: W 1100 x H 1200 x D 650 mm - Weight approx.: 200 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, upper jaw Laedpfx Asip Eqreffjk -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100 mm / M10 -Dimensions: see drawing in the photos -Dimensions: 2678/15/H57 mm -Total weight: 15.7 kg

Year of construction: 2001, condition: ready for operation (used), General Data Machine weight 9200 kg Control Unit Brand AMADA Main Drive Pressing force 200 kN Stroke 1350 mm Additional Equipment Laedpfx Aex D If Heffek Next to the machine, there are 2 tool cabinets This AMADA Vipros 255 was manufactured in 2001. It is a used punching and bending machine, ideal for those looking to enhance their metal fabrication capabilities. Contact us for more information about this machine. Application Types Punching

Condition: good (used), Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg Ledpfx Aeip Eqksffoak

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, total height: 1,900 mm, General Data Lajdpfx Afox D Efqefek Measurements width 1300 mm Measurements depth 2450 mm Measurements height 1900 mm Control Unit Brand SIEMENS This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. Application Types Bending