Used Maho Mh 600 for sale (447)

Condition: repair required (used), functionality: limited functionality, Offered for sale is a Maho 700 milling machine. Visually and technically in good condition. Includes digital readouts for the X, Y, and Z axes. Comes with a machine vise (as shown in the photos). It was used by us for apprentice training. The machine is being sold as in need of repair. Feed in the X and Y axes functions perfectly. The feed in the Z-minus direction also works. Only in Z-plus (raising) does it stick a little. However, this should be fixable with maintenance. The machine can be inspected under power in 45659 Recklinghausen. Hedpsy Rxvlsfx Aa Eefi

Condition: used, Technical details: x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm control: Heidenhain TNC 121 spindle taper ISO: SK 40 quill stroke vertical: 120 mm spindle head swivable left - right: je 90° ° turning speed range: 40 - 1.600 U/min throat of the milling spindle: 200 mm table surface area: 1.050 x 627 mm table swivable approx.: +45/ -45 Grad table rotating: 360 Grad table movement - horizontal: 200 mm Hfjdpozibabjfx Aa Eoi table feed: X/Z 5 - 5.000 mm/min table feed: Y 2,5 - 250 mm/min total power requirement: 8 kW weight approx.: 3,2 kg dimension machine xH: 2,3 x 2,0 x 1,850 m

Year of construction: 1988, condition: ready for operation (used), A Maho CNC universal tool milling and drilling machine is available. Travel X/Y/Z: 800mm/450mm/500mm, Table dimensions X/Y: 1200mm/600mm, Tool holder: SK40, Speed: 3150rpm, Feed rate: 1500mm/min, Rapid traverse: 3m/min, Quill stroke: 50mm, Resolution: 0.001mm. Machine dimensions X/Y/Z: approx. 3850mm/4400mm/2050mm, Weight: approx. 4100kg, Control: Philips CNC 432. The machine was partially overhauled in 2006. Documentation vorhanden. An on-site inspection is possible. Hfedpezka N Defx Aa Eoi

Condition: good (used), CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards Hfodpeq T T I Isfx Aa Eei -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A1 -IDENT NO.: 27.71 231 -Dimensions: 400/280/H75 mm -Weight: 1.6 kg

Condition: used, Control panel, touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel, Touch Panel Hedpjq T T Nwefx Aa Eofi -Manufacturer: NFI Electronics, touch panel from CNC milling machine MAHO MH 800C -Type: 1435-18-22 -Total dimensions: 340/310/H30 mm -Weight: 0.8 kg

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller Hodpfoq T T Npex Aa Ejfi -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C -Type: KDS 1.1-50-300-W1 MOD 4/1X108-091 -Quantity: 1x servo controller available -Dimension: 490/110/H390 mm -Weight: 15 kg

Condition: used, Control cabinet - cooling device, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling device, control cabinet cooler -Manufacturer: Siemens, heat exchanger control cabinet cooling device from milling machine MAHO MH 800C -Type: 8ME 7874-DR Hsdpfxsq T T Nze Aa Ejfi -Voltage: 230V -Power consumption: 170W -Dimensions: 415/130/H725 mm -Weight: 14.2 kg

Condition: used, Tool changer chain, chain magazine, tool changing system, tool magazine Hfedpfjq Tvp Uox Aa Esi -Manufacturer: MAHO, Tool changer from CNC machining center MAHO MH 800C -for: max. 24 shots -Recording: SK -Dimensions: 1200/410/H480 mm -Town weight: 106 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Indramat, AC servo controller from CNC milling machine MAHO MH 800C Hedpoq T T I Dsfx Aa Eofi -Type: TDM 3.2-20-300-WO MOD 14/1X023-094 -Quantity: 2x servo controllers available -Dimension: 320/70/H390 mm -Weight: 7.7 kg

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay boards -Manufacturer: MAHO, relay board from CNC milling machine MH 800C Hfedpfoq T T Ndsx Aa Eei -Type: 28A2 -IDENT NO.: 27.71 232 -Dimensions: 400/280/H75 mm -Weight: 1.5 kg

Condition: good (used), CNC control, card slot, control cards, plug-in cards, circuit boards, control rack -Manufacturer: Philips, control rack from CNC milling machine MAHO MH 800C Hedpfx Aoq T T Nhja Eefi -PCB: 4022 224 7062 -Card: 4022 224 3433 -Graphic Modem: 4022 224 3451 -Cent Proc: 4022 226 2331 -Drive Mod.: 4022 226 3645 / 4022 226 3690 -LS/LS board: 4022 226 3680 -Inp Outp Mod: 4022 226 3531 2 pieces -Power supply: 4022 226 2270 PE 1870/03 -Individual components: see photos -Price/sale: complete -Dimensions: 375/310/H340 mm -Weight: 13.4 kg

Condition: used, Pressure reducer, pressure regulator, bladder accumulator, high pressure bladder accumulator, hydraulic accumulator, pressure accumulator, membrane accumulator Hfjdpfx Aeq T T Ntsa Eoi -Manufacturer: Hydac, pressure accumulator from CNC machining center MAHO MH 800C -Type: SBO140-1.4E1/112U-140FT080 -Operating pressure: max. 140 bar -Quantity: 2x pressure storage available -Price per piece -Dimensions: Ø 145 x 205 mm -Weight: 3.7 kg

Condition: used, total power requirement 7 kW weight of the machine ca. 3500 kg dimensions of the machine ca. 2300x1900x2000 mm Hedpfx Ajy Nnyqea Eefi

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: MAHO Toolroom Milling Machine Type MH 500 M Year of manufacture 1989 Heidenhain Digital Display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill stroke 50 mm Travel X/Y/Z 500/380/350 mm Drive 3 kW Feed rates 10 – 1000 mm/min Coolant system Weight 1600 kg Adapters Hydraulic vise Hedpfx Aezg Ti Asa Ejfi Price: €3,000 plus VAT, ex location

Condition: used, Universal Milling Machine MAHO MH 800 Hjdpfx Aszg Ickoa Eofi Travel X: 700 mm Travel Y: 450 mm Travel Z: 450 mm Spindle SA 40 Spindle exit : 125 mm Spindle speed: from 32 to 1600 RPM Table size: Length 1050 mm x Width 620 mm Manual table travel: 225 mm Table rotation at 360° Swivel table at +/- 30° Scale 3 axes ACU-RITE Sensory drilling Feeds spindle not working Clutch speed used Lubricant pump Voltage: 380 V Width: 2000 mm Depth: 2100 mm Height: 2500 mm Weight: 3 T

Condition: used, Year of construction: 1987, Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T Hfjdpfx Aaezg Ibmo Esi

Condition: used, Year of construction: 1985, For sale: MAHO MH 1000C milling machine Factory number 11429 BKW GmbH, model S.05ES Year of manufacture: 1985 18 bar; Volume: 1.6 m3/h; 3000 1/min; kW 0.36; 50/60 Hz; V 190-240; A 2.85; Net price: 700 EUR. Hfedpfx Aaszgu Iyo Eji

Condition: used, Year of construction: 1991, x-travel 1000 mm y-travel 500 mm z-travel 700 mm table surface area 1250 x 700 mm spindle taper ISO 50 spindle turning speed range 20 - 3200 U/min quill stroke 100 mm semi-automatic operated Phillips 432 Number of working hours 62.340 h main drive motor 22 kW total power requirement 27 KVA weight of the machine ca. 7,7 t base area 3,8 x 4,1 x 2,4 mm accessories: hydr. Schraubstock X axis, longitudinal 1,000 mm Hodpfx Aajtv Ii Ij Eefi Y axis, vertical 500 mm Z axis, cross 700 mm Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Rotary axis as 4th axis with housing of the working area

Condition: used, x-travel 400 mm y-travel 400 mm z-travel 300 mm Hjdpfx Aasxv D Uze Ejfi rapid traverse 1,2 m/min feed range 5 - 500 mm/min creep feed 1:100 tool taper ISO 40 stroke v60 h70 mm table - universal ca. 620 x 320 mm table vertical adjustable 350 mm weight of the machine ca. 1200 kg Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment

Condition: ready for operation (used), Maho milling table for Maho milling machine MH 700 S, milling table for interchangeable pallets 500x630 mm, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for costs of packing and shipping! Hfodpox Dw Iwefx Aa Eoi

Condition: ready for operation (used), Maho milling head (Maho milling machine MH 700 S), used, normal signs of wear, 100% fully functional, scope of delivery as per photos. NOTE: Please enquire separately for costs of packing and shipping! Hjdpfx Aaex Dw Iqj Esfi

Condition: ready for operation (used), Maho turntable for MH 800 C without motor and encoder - Height: 59cm / Width: 61cm / Length: 90cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hfsdpstvct Hsfx Aa Eji

Condition: excellent (used), Year of construction: 1993, x-travel 500 mm y-travel 380 mm z-travel 350 mm tool taper ISO 40 spindle turning speed range 63.0 - 4000 U/min Hfsdpfxszbc Dgj Aa Eei feeds 10 - 1000 mm/min quill stroke 50.0 mm table-size 800 x 360 mm table load ca. 250 kg T-slots 14H7 - 5/63 mm rapid traverse X-axis 1.5 m/min rapid traverse Z-axis 1.5 m/min rapid traverse Y-axis 1.0 m/min Control DIGI "VRZ 650" Number of working hours 810 h voltage 380 V control voltage 110 V engine output 8.0 kW weight 1850 kg dimensions of the machine ca. 1880 x 1796 x 1840 mm from a training center very little run (!!) operating hours approx. 810 hours Equipment: - robust conv. electro-motorized universal milling machine - HEIDENHAIN digital display incl. control panel * swiveling, front right * display font 0.005/0.001 mm - Electro-motorized adjustment of all axes (X/Y/Z axis) * rapid traverse in all 3x directions * Manual adjustment via handwheel also possible - Infinitely variable speed adjustment - Vertical milling head with quill adjustment * ISO 40 tool holder * Automatic tool clamping with clamping/pull bar - Robust work table incl. T-slots ... 800 x 390 mm * Number/size of T-slots 5 pieces 14H7 * Distance between T-slots 63.0 mm * Safety housing (own construction) - Coolant device incl. lower chip tray - Counter support = horizontal milling device - Halogen/machine lighting - Central lubrication incl. container - Original operating instructions

Condition: good (used), Second-hand machine in good condition Control type: Conventional active digital Location : 35708 Haiger Price : 13.500€ excl. Technical data: Digital display 3-axis digital display HEIDENHEIN TNC 134 Travel X-axis 500 mm Travel Y-axis 350 mm Travel Z-axis 380 mm Tool holder Vertical milling head SK 40 with hydr. tool clamping DIN 2080 ring groove Table type Fixed table Table clamping surface 800 x 360 mm Hjdpfx Aajigv Ipe Eefi T-slot size 14 mm Weight 1,600 kg Dimensions 1500 x 2000 x 1900 mm Accessories - Central lubrication - coolant system - Operating instructions

Year of construction: 1991, condition: ready for operation (used), Travel X/Y/Z: 500mm/380mm/350mm, tool holder: SK40, quill stroke: 50mm, speed: 4000rpm, feed: 2m/min, rapid traverse: 4m/min, table dimensions X/Y: 800mm/360mm, max. table load: 250kg. Machine dimensions X/Y/Z: approx. 1650mm/2250mm/1850mm, weight: approx. 1800kg, control: Maho 232. The Y-axis shows a malfunction from a feed rate of 50%. Documentation available. An on-site inspection is possible. Hjdpfx Aozc Rd Roa Eefi