Used Maho 500 C for sale (431)

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control Heidenhain Millplus weight of the machine ca. 9 t Tedozdvglepfx Amrec

Condition: ready for operation (used), Maho electronic handwheel with spiral cable, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Tedpfx Amoi Ebz Eorsc

Condition: good (used), Year of construction: 2011, functionality: fully functional, Discover the used 5-axis machining center DECKEL MAHO DMU 60 eVo, manufactured in 2011. This machine is equipped with a Siemens control system and, thanks to features such as internal cooling, a measuring probe, and laser measuring, offers the highest precision for complex manufacturing tasks. A very well-maintained and immediately ready-for-use machining center for demanding users. Technical data of the Deckel Maho DMU 60 eVo: Travel in X-axis (mm) 650 Travel in Y-axis (mm) 500 Travel in Z-axis (mm) 500 Travel in B-axis -5/+110 C-axis nx360 Number of axes 5 Spindle speed (rpm) 14000 Spindle power (kW) 18.9 Tool interface SK40 Weight (kg) 10000 Machine hours (h) 15995 Year of manufacture 2011 Control system Siemens 840D SL Control type CNC Total power requirement (kW) 50 kVA Tsdpfx Amezq Eghoroc Weight (kg) 10000 kg Location Baden-Württemberg Delivery September 2026 Equipment and accessories: -Internal cooling -Chip conveyor -Laser measuring -Measuring probe -3D-quickSET for checking and correcting the 4- and 5-axis kinematics -Band filter -Used tool holders -Coolant gun

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 Todpfsy E Np Ssx Amrjc control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", *

Condition: good (used), Year of construction: 2007, operating hours: 48,000 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: Heidenhain, controller model: MillPlus, overall weight: 10,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 17,800 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Todpfx Amezk E U Sjrjc

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Tsdpfx Amjxcp R Ujrec Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1988, x-travel 600 mm y-travel 450 mm z-travel 450 mm spindle turning speed range 20 - 6300 U/min Number of tools 30 St. tool taper SK 40 total power requirement 17 kW weight of the machine ca. 4 t Tedpfx Amew Inr Asrsc dimensions of the machine ca. 3,2 x 3,4 x 2,2 m

Condition: used, Year of construction: 2007, x-travel 635 mm y-travel 510 mm z-travel 460 mm control iTNC 530 Heidenhain power capacity - main spindel 13 / 9 kW turning speed range - main spindle 20 - 10.000 min/-1 Torque 83 / 57 Nm tool taper SK 40 tension force 10 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 30 pos. max. tool diameter 80 mm Todpfsyaci Hex Amrsc max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min Feed force 5 kN input unit 0,01 mm rapid traverse 30 m/min total power requirement 20 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V - Spindle-Runtime only approx. 7.883h - Power-On approx. 23.023h

Condition: used, Year of construction: 2006, x-travel 750 mm y-travel 600 mm z-travel 560 mm Control SIN840D pl table-size 950 x 650 mm workpiece weight max. 1.000 kg feed X/Y/Z/-axis 1 - 90.000 mm/min rapid traverse X/Y/Z 90,00 m/min spindle turning speed - stepless 1 - 18.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 35,00 KW tool taper HSK-A63 tool magazin: 30 tool diameter 80 mm tool diameter with 2 vacant positions 140 mm tool length - max. 300 mm weight of tools max. 10,00 kg total power requirement 58,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 7,00 x 4,00 x H3,50 m Control SIEMENS Sinumerik 840D powerline with ShopMill, EROWA pallet system MTS500, tool breakage control, coolant-unit, coolant through the spindle (23 l/min at 40 bar), chip conveyor, Tedpfx Aevxwxiemrec electronic handwheel

Condition: used, Year of construction: 2008, x-travel 1035 mm y-travel 560 mm z-travel 510 mm Control Heidenhain type iTNC 530 table surface area 1400x650 mm workpiece weight 1000 kg Tool changer . spindle taper ISO SK40 Spindle capacity 10 KW turning speeds 8000 U/min total power requirement 20 kVA weight of the machine ca. . t dimensions of the machine ca. . m Serial number: 15425033554 Chip conveyor 2 hydraulic vises Operating hours: 53005 Spindle hours: 12233 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Tedpfx Amoyqvh Rerec Your Markus Hirsch Team

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Tsdpfx Amjzauxgjroc Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: not inspected (used), operating hours: 28,461 h, functionality: unexamined, machine/vehicle number: 28850008692, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS SINUMERIK 810 D, table load: 500 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline is one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL DETAILS Travel X-axis: 630 mm Travel Y-axis: 500 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Feed rate X-axis: 0–30,000 mm/min Feed rate Y-axis: 0–30,000 mm/min Feed rate Z-axis: 0–30,000 mm/min Tool holder: SK 40 Number of tool positions: 24 Table width: 500 mm Table length: 800 mm Max. table load: 500 kg Loading height: 850 mm MACHINE DETAILS Tedpoxm Tu Eefx Amrsc Control model: SIEMENS SINUMERIK 810 D Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,400 x 2,400 mm Total weight: 8,000 kg Operating hours: 28,461 h

Condition: used, Year of construction: 2011, operating hours: 26,476 h, functionality: fully functional, workpiece height (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Tjdjz Dku Uepfx Amroc Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 43774 Spindle Working: 26476 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: repair required (used), Year of construction: 1983, functionality: limited functionality, total height: 2,650 mm, total width: 3,640 mm, total length: 4,620 mm, overall weight: 6,800 kg, Technical details: X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 800 mm Rapid traverse: 6 m/min Working feed: 1- 400 mm/min. Rotary axis resolution (degrees): 0,001 Control unit: Philips 432 Spindle revolutions: 20-2000 RPM Spindle stroke: 125mm Spindle taper: ISO 50 Spindle power: 15kW Feed force axis X and Z: 8000N Tjdpeunwd Tofx Amrsc Feed force axis X and Z: 24000N Table size 1250 x 800 mm Table load: 800kg Programing resolution: 0,001mm Documentation for machine Note: Defect electronic card should be replaced. The machine is mechanicaly in excellent condition, and could easily be retrofitted with modern CNC controls.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 19,831 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, total height: 2,700 mm, total width: 2,800 mm, table load: 500 kg, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, product length (max.): 3,300 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 63V vertical machining centre was manufactured in 1997. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a tool magazine capacity of 24 tools and a maximum spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 63V machine we have for sale. Contact us for further details. • Table: • Size: 800 × 500 mm • Operating hours: 19,831 h (actual counter from control) • Condition: Powered, connected, and fully operational • Note: Control upgrade from Sinumerik 810D to 840D Todpfx Amjyw Rmvsrec Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2008, 1 used vertical machining center Manufacturer: Deckel Maho Model: DMU 80 monoblock Year of manufacture: 2008 Control: ITNC 530 Technical specifications X travel: 980 mm Y travel: 630 mm Z travel: 630 mm Todpjxa Eudjfx Amroc Control: iTNC 530 Total power requirement: 10 / 15 kW Machine weight approx.: 9.5 t Space requirements approx.: 4*4*2.5 m Additional information Equipment: Electronic handwheel Operation mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-tool magazine Fixed table 1250 x 700 mm Chip conveyor Coolant system

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,421 h, functionality: fully functional, machine/vehicle number: 29100009074, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece diameter (max.): 140 mm, spindle speed (max.): 16,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travel range X-axis: 640 mm Travel range Y-axis: 600 mm Travel range Z-axis: 500 mm Clamping area length: 850 mm Clamping area width: 600 mm T-slots: DIN 650-14 Loading height, top edge of table: 850 mm Table load max.: 600 kg Spindle manufacturer: Franz Kessler GmbH Speed: 1,600 - 4,700 / 4,700 - 16,000 rpm Number of magazine slots: 30 Slot coding: Fixed slot coding Load weight max.: 90 kg Chip-to-chip time without free travel logic t3/t2: 6.8 s Chip-to-chip time without free travel logic t1 (30): 7.9 s Chip-to-chip time with free travel logic t3/t2: 8.3 s Chip-to-chip time with free travel logic t1 (30): 9.3 s TOOLS AND TOOL MAGAZINE Diameter, standard tool max.: 100 mm Diameter, special tool with free neighboring slots max.: 140 mm Tool length max.: 300 mm Tool weight max.: 6 kg FEED Feed force X, Y, and Z axes: 7,000 N Feed rate X, Y, and Z axes max.: 40 m/min Rapid traverse speed Y and Z axes: 40 m/min Rapid traverse speed X axis: 70 m/min Ball screw diameter/pitch: 40/15 mm POSITIONING SYSTEMS Positioning accuracy, direct measuring system X-axis: 0.008 mm Tsdpfezpxqdox Amroc Positioning accuracy, indirect measuring system Y and Z axes: 0.020 mm Positioning accuracy, direct measuring system (option): 0.010 mm Resolution: 0.001 mm Input fineness X, Y, and Z axes: 0.001 mm MACHINE DETAILS Operating hours: 11,421 h Power-on time: 32,054 h Connected power: 33 kVA Nominal current max.: 58 A Fuse rating: 63 A Mains voltage: 400 V Mains frequency: 50/60 Hz Control voltage: 230 V Control voltage: 24 V COOLANT AND CHIP MANAGEMENT Chip box container capacity: 150 l Pump capacity, external coolant supply: 50 l/min Pressure, external coolant supply: 2.0 bar Pump capacity, chip flushing: 90 l/min Pressure, chip flushing: 1.9 bar Pump capacity, flushing gun: 50 l/min Pressure, flushing gun: 2.0 bar

Condition: used, Year of construction: 2002, CNC machining center Deckel Maho DMF 250 linear, year of manufacture 2002, and DMC 63 H, year of manufacture 2002 Tedpfxoyphl Es Amrec

Condition: used, Year of construction: 2006, operating hours: 77,700 h, functionality: fully functional, machine/vehicle number: 1143 000195 3, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 64 kVA, controller manufacturer: Siemens, controller model: SIEMENS 840 D, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, table width: 630 mm, table length: 530 mm, table load: 400 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 34,700 h, spindle motor power: 64 W, number of slots in tool magazine: 120, input voltage: 400 V, pallet spaces: 5 euro pallets, Equipment: chip conveyor, documentation/manual, We offer this used universal machining center, a DECKEL MAHO DMC 60 T RS3, manufactured in 2006. Apparent power: 64.2 kVA Maximum rated current: 93 A Tsdpfx Aezg U N Remrec Rated current: 100 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible. Tsdpfev H Dgpox Amrec

Condition: used, Year of construction: 2006, x-travel 630 mm y-travel 560 mm z-travel 560 mm table surface area 1000 x 600 mm spindle taper HSK 63 A spindle turning speed - stepless 18.000 U/min feeds x/y/z -stepless 0 - 30.000 mm/min rapid traverse 30 m/min Tjdpfxsy Tyzue Amrjc no. of tools in magazin 2 x 12 workpiece diameter at full load 130 mm tool length - max. 315 mm weight of tools max. 8 kg internal coolant system feed 40 bar control HEIDENHAIN control MillPlus iT table load capacity max. 500 kg total power requirement 52 kVA weight of the machine ca. 6,5 t dimensions of machine L x W x H 3,40 x 1,86 x 2,42 m Accessories: probe HEIDENHAIN, TS 640; electron. handwheel, mech. vice (jaw width 160 mm), chip conveyor, coolant with bandfilter

Condition: used, X-axis: 640mm, Y-axis: 600mm, Z-axis: 500mm, feed force (40% duty cycle) X-, Y-, Z-axis: 7000N, max. feed speed X-, Y-, Z-axis: 40m/min, rapid traverse speed Y-, Z-axis: 40m/min, rapid traverse speed X-axis: 70m/min, ball screw diameter/pitch Y-, Z-axis: 40/15mm, number of magazine pockets: 30, position coding: fixed-position coding, max. tool loading weight: 90kg, max. diameter of standard tools: 100mm, max. diameter of special tools with adjacent positions free: 140mm, max. tool length: 300mm, max. tool weight: 6kg, table clamping surface: 850x600mm, T-slots: DIN 650-14, loading height (top edge of table): 850mm, max. load: 600kg, connected load: 39kVA, control: Heidenhain iTNC 530, length: 2500mm, width: 4100mm, height: 3000mm, weight: 7,74t, operating hours: 60.366h. With documentation. Tedpfozuwxqjx Amroc

Condition: good (used), DMG DMC 63 V, serial number 2885-0725, 11,972 operating hours. Tjdpfx Aszqdlpjmroc Available at the end of 2026.

Condition: ready for operation (used), Year of construction: 2002, Travel path X/Y/Z: 630mm/630mm/560mm, tool holder: HSK-63A, tool positions: 60, pallets: 2, pallet dimensions X/Y: 500mm/500mm, machine dimensions X/Y/Z: approx. 6600mm/6000mm/3200mm, weight: approx. 18000kg, control: Siemens Sinumerik, operating hours: approx. 24152. The machine has a system error - Runtime Error 285, Application oem4421 - and the PLC does not start up. Documentation available. An on-site inspection is possible. Tedpfx Aow Nq Rqomrec

Condition: ready for operation (used), Year of construction: 2005, operating hours: 13,305 h, travel distance X-axis: 635 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2005. It features a HEIDENHAIN iTNC 530 control unit and a 20-position tool changer, providing efficient machining capabilities. With a machine hour count of 39,396 hours, this vertical machining centre represents an opportunity for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details. Tedpfx Amoz Du S Rerec - Handwheel: Separate handwheel control- Machine Hours: 39,396 h - Programme Run Time: 13,305 h - Apparent Power: 20 kVA- Nominal Current: 28 A Jn max / 35 A- Voltage: 400 V / 230 V / 24 V- Frequency: 50 Hz- Known Defect: Fault with the clamping spring in the spindle- Not included: Chip Conveyor