Used Maho 400 E for sale (468)

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN iTNC 530 Table dimensions 500 x 380 mm table weight 500 Kg c-axis 0.001º ( ± 360º) 0 b-axis 180 ° rapid traverse X-axis 80 m/min feeds 50 m/min spindle turning speed range 18.000 U/min spindle taper BT- 40 spindle drive 30 kW Internal cooling system 40 bar Hedpfx Abjxluf Ao Djw handwheel HEIDENHAIN HR-410 total power requirement 50 kVA weight of the machine ca. 6,5 t

Condition: good (used), Year of construction: 2004, operating hours: 4,850 h, functionality: fully functional, controller model: iTNC530, The machine has only 1021 spindle hours. Has seen little use. 4th axis Paul Lehmann NC dividing head. Hodpfsxn S Uyjx Ab Dow

Condition: excellent (used), travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, controller model: Heidenhain TNC 426/430M, total height: 2,300 mm, total length: 2,200 mm, total width: 2,200 mm, table width: 700 mm, table length: 500 mm, table load: 200 kg, overall weight: 3,000 kg, spindle speed (max.): 9,000 rpm, operating hours of spindle: 10,292 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 400 V, Equipment: documentation/manual, This Deckel Maho DMU 50T comes from a training department and has therefore never been used as a production machine. The machine is still in very tidy condition; both the axes and the spindle run very smoothly. Equipped with a Heidenhain electronic handwheel. Hodpfx Absxlquaj Dsw Dimensions: 2200x2200x2300 mm (LxWxH) Weight: approx. 3000 kg

Condition: used, Year of construction: 1996, Machine: Console Milling Machine - Universal Brand: MAHO Type: MH1000 Technical Specifications: - Spindle motor: 5.5 kW - 1500 RPM - Feed motor: 3 kW - 1500 RPM - Pump motor: 0.18 kW - 3000 RPM - 70 l/min - Spindle speeds: (18) 32-1600 RPM - Spindle nose: ISA40 - Drill spindle travel; 125mm - Table dimensions against the column: 570x600mm - X travel: 1000mm Hodpfsxn Rkgsx Ab Dew - Slide travel: 750mm - Z travel: 600mm - X feeds: 10-5000mm/min - Rapid feed: 1.4m/min - Universal table dimensions: 1250x740mm - 360-degree rotating table - Table tilts longitudinally and transversely by approximately 30 degrees - Machine weight: 5500 kg

Condition: excellent (used), Year of construction: 1999, x-path 1,250 mm y-path 880 mm z-path 800 mm Main spindle: Speed range - main spindle max. 12,000 min/-1 Drive power - main spindle 15 / 10 kW Table clamping area 1,500 x 1,050 mm Number of tool positions 30 pos. Hjdpfxogypabo Ab Djw

Condition: good (used), Working travels 500x350x380mm Table size 790x360mm Spindle taper ISO40 Spindle speeds 63-4000 rpm Active digital read-out Misc accessories Hsdjff R Slopfx Ab Dow MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1997, travel distance X-axis: 625 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Machining Centre DMU 60 T Control: Heidenhain TNC 426 Hodpexnwv Aefx Ab Dew Power-on hours: approx. 40,000 Spindle hours: approx. 12,900 Travel paths: X - 625 Y - 500 Z - 500 4th axis Controlled by Hoffmann universal dividing head, mounted on table

Condition: ready for operation (used), Year of construction: 1999, Make: DECKEL MAHO Type of machine: DMC 80 H / RS4 Year of manufacture: 1999 Control system: Siemens 840 D Machine's weight: 18,5 t Tool holder: SK 50 x-travel: 800 mm y-travel: 710 mm z-travel: 710 mm Speed range: 10.000 1/min Overall dimensions: 9,0 x 5,0 x 3,0 m Table dimensions: 400 x 500 mm Number of tools in the magazine: 180 (2x 90) pos Hodsxni Uqepfx Ab Dsw Internal coolant supply: 40 Bar : x

Condition: good (used), Year of construction: 2004, operating hours: 66,000 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, table load: 200 kg, overall weight: 6,500 kg, spindle speed (max.): 18,000 rpm, Equipment: rotational speed infinitely variable, For sale is a CNC milling machine from the brand Deckel Maho, model DMU 50 eVolution. Hsdpfxewvuzzs Ab Dsw The machine is in good condition and fully operational. History: 2022: Spindle rebalanced, new rotary union and gear ring Geometry newly adjusted Technical data: Year of manufacture: 2004 Control: Sinumerik 840 D Powerline X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Power-on hours: 66,000 h Operating hours: 31,000 h Table dimensions: Ø 500 mm Max. table load: 200 kg Max. spindle speed: 18,000 rpm Spindle taper: SK 40 Rapid traverse X/Y/Z: max. 50 m/min Tool magazine: 60 positions Space requirements: 4,700 x 5,400 x 2,600 mm Weight: approx. 6,500 kg Special equipment: - High-pressure coolant system - Band filter system - Chip conveyor - Automation flap, right side - Digital 3D touch probe - Blum laser measuring system Transport and loading can be organized Europe-wide on request and at an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Condition: reconditioned (used), Year of construction: 2001, Universal milling & drilling machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 320 Year of construction: 2001 Travels: X 500 Y 400 Z 400 Speed range: 20 - 4,500 rpm infinitely variable With the following accessories: Manual swivel rotary table with digital display for C + B axis Hsdsuw Sd Iopfx Ab Dew 700 mm x 500 mm clamping surface Electronic handwheel for X , Y , Z axis Splash guard cabin Machine light 4 pcs. Height-adjustable machine shoes Coolant device Operating instructions

Condition: ready for operation (used), Year of construction: 2001, operating hours: 88,546 h, Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 4 Movement X-Axis Movement 800 mm Y-Axis Movement 710 mm Z-Axis Movement 710 mm This 4-axis DECKEL MAHO DMC 80 H horizontal machining center was manufactured in 2001. It features a SIEMENS Sinumerik 840D CNC control, a spindle speed of up to 6000 RPM, and a 40-position tool changer. Additional highlights include dual 630 x 500 mm pallets, SK50 spindle taper, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 80 H horizontal machining center. Contact us for more information about this machine. Hsdpjxg Umvefx Ab Dew Application Types Milling

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, DMG UNIVERSAL MACHINE CENTER DMU80P hi-Dyn Year 2001 X800 Y700 Z 600mm Heidenhain iTNC530 NC Rotary Table Ø900x630mm NC B axis Milling Head Spindle 18,000rpm ATC 180 – HSK-A63 Roto Clear window Spindle thru' coolant 40 bar Cheap sales - 50.000,00 USD Hodpfx Aew A Dy Tsb Djw

Condition: used, Year of construction: 2002, x-travel 1100 mm y-travel 710 mm z-travel 710 mm Control Heidenhain iTNC 530 Number of working hours ca. 79.360 h spindle hours ca. 34.555 h In our opinion, the machine is in good used condition Hedpfoxgicfjx Ab Dsw and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 1999, Make: DECKEL MAHO Type of machine: DMC 80 H / RS4 Year of manufacture: 1999 Control system: Siemens 840 D Machine's weight: 18,5 t Tool holder: SK 50 x-travel: 800 mm y-travel: 710 mm z-travel: 710 mm Speed range: 10.000 1/min Overall dimensions: 9,0 x 5,0 x 3,0 m Table dimensions: 400 x 500 mm Hedpexni T Tjfx Ab Dsw Number of tools in the magazine: 180 (2x 90) pos Internal coolant supply: 40 Bar : x

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Hedpfx Aswtft Nob Dow Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: reconditioned (used), CNC vertical machining center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of construction: 2010 Travels: X 635 Y 510 Z 460 Hodpfx Aouqmvksb Dow Speed range: 20 - 8,000 rpm infinitely variable With the following accessories: Rigid angled table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Heidenhain TT 140 tool length measuring system Fully protected cabin with sliding doors and interior lighting Coolant device Signal light 4 colors Chip conveyor Chip flushing gun 3 pcs. Height-adjustable machine shoes Operating instructions

Condition: ready for operation (used), Year of construction: 2008, operating hours: 25,678 h, General Data Measurements width 1862 mm (transport width without handle) Measurements depth 3235 mm Measurements height 3000 mm Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Hsdpfxsxg Ulre Ab Dsw Number of axis 5 Movement X-Axis Movement 750 Y-Axis Movement 600 Z-Axis Movement 520 This 5-axis DMG DECKEL MAHO DMU 70 was manufactured in 2008. It features X-Axis Travel of 750 mm, Y-Axis Travel of 600 mm, and Z-Axis Travel of 520 mm, with a rapid traverse speed of 24 m/min. The main spindle achieves up to 14,000 rpm. Tooling includes a SK 40 tool holder and a 30-slot magazine. If you are looking to get high quality milling capabilities consider the DMG DECKEL MAHO DMU 70 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1999, Travel X/Y/Z: 600mm/525mm/500mm, rapid traverse: 15m/min, feed rate: 10m/min, speed: 12000rpm, spindle power: 10kW/15kW, spindle taper: SK40, tool positions: 25, table dimensions X/Y: 1000mm/540mm, max. table load: 350kg. Machine dimensions X/Y/Z: approx. 3000mm/2100mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 426M, operating hours: 34055h, spindle hours: 8787h. An on-site inspection is possible. Hodsxl Up Ijpfx Ab Dew

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,641 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, number of slots in tool magazine: 20, control type: CNC control, number of axes: 3, For sale is our used but maintained and good condition Deckel Maho DMC635 machining center due to machine park upgrade. The machine is available for inspection and can be put into production immediately. The milling machine has mainly been used in single-shift, small batch production. Upon request, it can be sold with 20 tool holders and a vise. Year of manufacture: 2008 Operating hours: 17,641 h Control: Sinumerik 840D Table clamping area: 790 x 560 mm X-axis travel: 635 mm Y-axis travel: 510 mm Z-axis travel: 460 mm Spindle speed: 0 - 10,000 rpm Number of controlled axes: 3 Through-spindle cooling: no Spindle taper: SK40 Hsdexl Ubdopfx Ab Dew Tool changer: yes Tool magazine capacity: 20 Rapid traverse: 30 m/min Dimensions (L×W×H): 3300x2905x2705 mm

Condition: good (used), Year of construction: 2002, Travel paths X/Y/Z: 560/560/510 mm Max. spindle speed: 18,000 rpm Tool holder: HSK 63A, 40 positions Table clamping surface: 400 x 400 mm Control: Siemens 840D Hsdpsxlznkofx Ab Djw

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches Hjdpoxdayijfx Ab Djw - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Year of construction: 1980, condition: reconditioned (used), Universal - swivel - tilting table for MAHO MH 1000 clamping surface: 1050 mm x 630 mm Hodpfxefx Aips Ab Dew The universal - swivel - tilting table is in a good condition !

Condition: ready for operation (used), Year of construction: 2007, Main Drive Spindle speed range 15000 rpm This 5-axis DECKEL MAHO DMC 70 Evo was manufactured in 2007. It features a HEIDENHAIN TNC 530 CNC control, HSK 63, and a spindle speed of 15,000 rpm. Includes a pallet changer with a size of 500 × 500 mm and a high-pressure through-spindle coolant system. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMC 70 Evo machine we have for sale. Contact us for more information about this machine. Hjdpfx Aoxg Ulxjb Dow Application Types Milling

Condition: ready for operation (used), Year of construction: 1999, Control Unit Brand HEIDENHAIN Model 426m Main Drive Number of axis 3 Hodpfx Aexgwb Njb Dow Movement X-Axis Movement 800 mm Y-Axis Movement 650 mm Z-Axis Movement 550 mm Additional Equipment Vise Angle table Various mounts Royal presetting device This 3-axis DECKEL MAHO DMU 80E was manufactured in 1999 and features a Heidenhain 426m control, travel distances of X 800mm, Y 650mm, and Z 550mm. It includes a 24-fold changer and an internal hard drive. Installation dimensions are approximately 2x3m. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMU 80E machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 7500 kg Control Unit Brand SIEMENS Model SINUMERIK 810D powerline and ShopMill Main Drive Spindle speed range 50–12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 640 mm Hsdpjxgi Twsfx Ab Dow X-Axis Rapid Traverse 70 m/min Y-Axis Movement 600 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 40 m/min Table Table load 600 kg This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2007. It features a Siemens 810D ShopMill control, SK40 spindle with speeds up to 12,000 rpm, and a tool magazine with 30 positions. The machine includes a chip conveyor, coolant gun, and a high-pressure coolant system. Ideal for precise and efficient machining. Contact us for more information about this machine. Application Types Milling