Used Magnetic Vices for sale (2,902)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 2595 € 12 mm 19 mm Weldon 0.4 kW 361 mm 238 mm 352 mm 145 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • tilt sensor stops the motor if machine breaks away • control panel is equipped with so called „vandal resistant” illuminated start/stop motor buttons. Standard shipping set: • Cordless Drilling Machine with coolant container • Plastic Box • Battery 4.0 Ah Bedpfxsyrhtnj Adroli • Handle (3 pcs) • Safety strap • Allen wrench hex s=4 with handle • Operator’s Manual OPTIONS (PRICES ON REQUEST): Battery charger Pressure cooling system Vacuumpad Vacuumpump Compressed air ejector

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1695 € 12 mm 19 mm Weldon 0.45 kW 316 mm 235 mm 328 mm 115 kg 12 mm Bsdpfsyrhqtex Adrsli 36 mm 50 mm 70 mm 260 U/min 6 mm The PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters. The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits. Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate current condition of the drill and give safety information. Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red) Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety information • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • Tilt sensor stops the motor if machine breaks away • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • innovative smart magnet with reduced weight Standard shipping set: • Cordless drilling machine • Plastic box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Cooling system • 4 mm hex wrench with a handle • Operator’s Manual OPTIONAL EQUIPMENT (PRICES ON REQUEST): Battery charger Pipe attachment Pressure cooling system Vacuum pad Vaccum pump Compressed air ejecto

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1055 € 12 mm 19 mm Weldon 1.1 kW 400 mm Bsdpoyrhp Aofx Adroli 126 mm 185 mm 10 kg 12 mm 40 mm 40 mm 45 mm 370 U/min 6 mm PRO-40 AD is a low profile mag drill, that fits in the tightest of spots. Perfect solution for any applications in confined spaces, wheretypical mag drills are too large. Its powerful motor enables drilling of holes up to 40 mm (1-9/16”) in diameter and up to 40 mm (1-9/16”) deep. An innovativeultra-strong magnetic base with high performance on air gaps makes it possible to work even on painted, rusted or thin surfaces. Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator from working on too thin or inadequate surfaces, preventing the motor from engaging if the adhesive force is dangerously low. PRO-40 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4”) Weldon shank. Features&benefits: • Low profile mag drill of 185 mm height only • Ultra-strong magnetic base with 1009 kgf (9900 N) holding force • Compact and lightweight design of just 10 kg • Milling capacity up to 40 mm with annular cutters • Accepts also twist drills with 19,05 mm (3/4”) Weldon shank • Extended stroke of 45 mm allows up to 40mm depth of cut • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Integrated swarf guard • Detachable feed lever (feat. ratchet) can be fixed from either side • Lifting handle for easy transportation • Cooling with a bottle Standard set includes: • Drilling machine • Plastic box • Handle • Pilot pin 6.34 x 102 mm for HSS cutters • Pilot pin 7.98 x 103 mm for TCT cutters • Safety strap • Hex wrench 4 mm • Operator’s Manual OPTIONS (PRICES ON REQUEST): Cutter extension Coolant bottle with nozzle 250ml

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) Blodpfx Adoyrhppsroi are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: good (used), bench vise, locksmith's vise, parallel vise -Jaw width: 150 mm Bledpjyq Hkpofx Adroi Wingspan: 315 mm -Number: 1x vises available Price: per piece -Dimensions: 570/220/H400 mm -Weight: 52.7 kg

Year of construction: 2014, condition: used, We are offering this used IFE Aufbereitungstechnik GmbH MPQ 750 overband magnetic separator, year of manufacture 2014. Bedpfx Adjyxrpnersli If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, 10-position digital magnetic stirrer without heating, designed for synchronous stirring. The magnetic coil technology provides noiseless and consistent stirring on all positions. Speed remains constant, even when load changes Blsdpfxeylwcxe Adrji Specification: Stirring speed: up to 1200rpm Stirring capacity: 400ml per position Dimensions – 19 x 57 x 6cm (w x d x h) approx Weight – 5kg Good working condition. Please check out our other listings as well.

Condition: used, functionality: unexamined, Ferwood Code: RU0010266 – Manufacturer Code: MKD025B-144-KG1-KN – Condition: Used – Functionality: Not Tested – Compatible Machine: – If interested, we offer an overhaul service; please contact us. 3KG 46X39X27 Bsdpeymdyyjfx Adroli

Condition: refurbished (used), “Wagner 451-130/160-600” for Sale With new transformer from 380 V. AC to 220 V. DC. Manufacturer: Wagner Type: 451-130/160-600 Power: 10,9/7,2 KW. Amperage: 49,3/32,5 A. Voltage: 220V.DC Magnet L x W: 1.600 x 1.300 mm. Bsdpfx Adoglvwgeroli Conveyor belt: 1.400 mm. AA. : 2.530 mm.

Condition: used, Mechanical quick-action vise, NC machine vise, FRIBOSA, Type, Size B Precision machine vise, grinding vise, clamping device Jaw width 100 mm Jaw height 34 mm Clamping range 0 to 130 mm Guide rail height 40 mm Guide rail length 270 mm Bledpfeilx Ufjx Adrsi - Mechanical machine vise - Clamping range via trapezoidal spindle - Sturdy base, ground on all sides - Can be mounted horizontally, vertically, or laterally Dimensions L x W x H 310 x 100 x 77 mm Weight: 10 kg Good condition

Condition: used, Permanent magnet DC servo motor SIEMENS Bsdpouch N Iofx Adrsli Type: 1 HU3074-0AC01-Z NO.B J157 1047 01 008 Voltage = 167 Volt DC = direct voltage Power = 1.8 kW Current consumption = 12.5 amps Speed = n. max.: 2000 rpm Rated torque = Mo 7 Nm Shaft diameter 24 mm Stub shaft length 50 mm Centering diameter 130 mm Bolt circle diameter 165 mm / 4 x 11 mm holes - Shaft with 8 mm keyway Housing dimensions L/W/H 335 x 140 x 145 mm Weight: 23 kg good condition

Condition: used, Rear grinding machine with permanent magnet clamping plate, JUNG, type HA 20 Device no.: 3344 Profile depth: max. 15 mm Angle setting: 0° to 2° Magnet plate: 115 x 115 mm Clamping range: 110 x 75 mm Height of magnet plate: 119 mm Workpiece dimensions L x W x H: max. 60 x 100 x 50 mm Power consumption: 1 ampere Bjdjdz Sqxopfx Adroli Operating voltage: 24 volts, direct current (V/DC) - Mechanically switchable permanent magnet Dimensions L x W x H: 500 x 200 x 125 mm Weight: 25 kg In good condition Suitable for use in cutting tool mold making for conically rear-ground cutting plates or mold inserts.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,610 mm, total width: 1,040 mm, total height: 350 mm, overall weight: 723 kg, power: 2.2 kW (2.99 HP), input voltage: 400 V, belt width: 650 mm, Equipment: documentation/manual, emergency stop, Applications & Customer Benefits: The SortMagnet CB ensures efficient removal of ferromagnetic contaminants (bolts, tools, ferrite parts) from conveyed bulk material streams. It increases process reliability, protects downstream equipment, and reduces costly downtime across recycling, mining, construction, and material processing industries. Key Features: Blodpfx Adjxcm Hasrsi • Continuous overbelt separation with strong permanent magnet • Reliable extraction of ferrous contaminants from bulk flow • Heavy-duty, low-maintenance design for long service life • Easy integration above existing conveyors Tech Highlights L 1610 mm · W 1040 mm · H 350 mm · Belt width 0.65 m · Drive power 400V / 2.2 kW · Belt speed: 1.1 m/s · Weight 723 kg · Permanent magnet

Condition: used, This listing is for the Stuart Scientific SM1 Magnetic Stirrer The unit is not at it's best aesthetically and that is reflected in our pricing, it is however in full working condition and is ready for immediate release. The Stuart Scientific SM1 Magnetic Stirrer is a laboratory bench-top device designed to mix liquids uniformly using a rotating magnetic field. It’s a basic analogue magnetic stirrer often found in educational, research, and routine laboratory settings for mixing solutions, suspensions, or samples without heating Bledpfxjx Npnve Adrei The SM1 is suitable for everyday laboratory mixing tasks such as: Mixing aqueous solutions, buffers, and reagents. Suspension of particulates or cells. Routine solution preparation and titration support. Because it lacks a heating element, it’s ideal where temperature control isn’t needed, or when stirring only is required (e.g., during dissolving solids into liquids).

Condition: used, functionality: unexamined, total width: 300 mm, conveyor belt width: 290 mm, -KOM 1550- Offered here is a magnetic belt conveyor. The technical data can be found in the images and on the nameplates. Note: Bodpfx Adoyvfqloreli The chip conveyor is available from our stock and can be inspected under power. Motor: Manufacturer: SEW Eurodrive Type: R43-VU01

Condition: good (used), functionality: fully functional, power: 0.37 kW (0.50 HP), motor manufacturer: SEW Eurodrive, Equipment: type plate available, -KOM 3157- Offered here is a magnetic belt conveyor from CHEMAPERM. The motor of the magnetic belt conveyor has been tested and is fully functional. Dimensions can be taken from the pictures. Specifications of the magnetic belt conveyor: Manufacturer: ChemaPerm Type: 62942 Year of manufacture: 1978 Motor specifications according to nameplate: Manufacturer: SEW Eurodrive Type: SA47 D171D4 Power: 0.37kW Revolutions/min: 1380/37 Bjdpfx Aoxrcktsdroli

Condition: good (used), Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise Bedjykzhvspfx Adreli -T- Round groove: 20 mm, dimensions see photos -Degree display -Dimensions: 350/320/H45 mm -Weight: 20 kg

Condition: excellent (used), Clamping range Ø 15-160 mm Max. Workpiece weight 15 kg Bodpfjrry Egex Adreli Weight of the prismatic vice 3.0 kg

Year of construction: 1989, condition: good (used), machine/vehicle number: P28979, Magnetic drill machine with safety transformer Offer 20427 Technical data: - Drilling capacity approx. 32 mm - Drill spindle connection MK 3 - Overhang 70 mm Bsdpfegzhniex Adroli - Stroke approx. 175 mm - 8 speeds approx. 10 - 420 rpm - Drive 42 V / 960 watts - Magnetic base 100 x 220 mm - Magnetic base with drill machine carrier that can be swivelled to the left and right - Space requirement approx. W 300 x H 700 x D 460 mm - Weight approx. 49 kg - Safety transformer – isolating transformer, manufacturer FEIN, type ESB 1000 - Primary current 220 V - Secondary current 42 V - Space requirement approx. W 300 x H 350 x D 350 mm - Weight 27 kg

Condition: good (used), Year of construction: 2009, machine/vehicle number: 67894-09, Offer 18204 Bodpfxeumkafe Adreli Technical data: - Pole plate length 400 mm - Width 200 mm - Nominal adhesive force 150 N/cm² - Weight 35 kg - Space requirement W 400 x D 200 x H 60 mm

Condition: new, functionality: fully functional, overall weight: 32 kg, input voltage: 230 V, Automatic internal lubrication – coolant is supplied directly to the core drill, increasing tool life and work quality STEPLESS speed adjustment – allows optimal matching of cutting speed to the material being machined Morse taper MK4, enabling the installation of various tools such as twist drills, countersinks, reamers, tap holders, or hole saws Powerful high-torque motor with soft start and overload protection ensures reliable operation Strong electromagnet securely holds the machine in place during operation Ergonomic control panel enables quick and intuitive setting of work parameters Robust machine construction increases stability and minimizes vibrations during machining Wide range of applications – ideal for industrial, workshop, and service use Technical specifications: Drilling diameter (core bit): 100 mm Drilling depth (core bit): 100 mm Drilling diameter (twist drill): 38 mm Spindle stroke adjustment: 275 mm Maximum threading capacity: M32 Spindle speed min.: 50 rpm Spindle speed max.: 800 rpm Speed settings – number of gears / stepless: 1. 50–110 / 2. 20–200 / 3. 200–500 / 4. 320–800 Spindle taper: MK4 Bodpfjyt I Uuex Adreli Weldon shank: 19/32 mm Distance spindle / base plate: 290 mm Distance Weldon shank / max. plate: 165 mm Magnet holding force: 20,500 N Magnetic base dimensions: 245 x 125 x 50 mm Motor power: 2,580 W Voltage: 230 V Dimensions – width: 330 mm Dimensions – depth: 430 mm Dimensions – height: 830 mm Weight approx.: 31.5 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice -Machine vice: CEKABA-BON clamping jaws 125 x 40 mm -Clamping depth: 130 mm -Dimensions: 440/210/H90 mm -Weight: 14.4 kg Bodpfx Adeyilkvsrjli

Condition: good (used), Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 130 x 30 mm Bjdexrz Auspfx Adroli -Clamping depth: 125 mm -Dimensions: 405/130/H105 mm -Weight: 18.7 kg

Condition: used, Round magnets with MK 4 mount, D = 140 mm and D = 220 mm Bledpjyr Nd Ujfx Adrei

Condition: used, Hydraulic machine vice, high-pressure clamp ARNOLD / FRESMAK Jaw width: 160 mm Jaw height: 50 mm Clamping force: 5 tons Bjdpfxsxp R E Te Adrjli Clamping range: 0 to 305 mm Maximum opening: 308 mm Guideway height: 112 mm - 2 clamping ranges adjustable via locking pin, 0 to 158 and 148 to 308 mm - with rotary plate Dimensions (L x W x H): 580 x 325 x 165 mm Own weight: 65 kg Good condition