Used Magnet Spreader for sale (2,517)

Year of construction: 2022, condition: good (used), machine/vehicle number: 108028, Offer 26073 Technical data: Lodpfx Aiezgcm Deiehh - Boiler capacity: 1000 L - Operating pressure: 11 bar - Maintenance opening - EC Directive 2014-68 EU - Boiler diameter: 800 mm - Shut-off valves - Pressure reducer - Electric condensate drain: 220 V - Space requirement: approx. W 1150 x H 2450 x D 900 mm - Weight: approx. 300 kg

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Condition: factory-reconditioned by Osama Technologies Equipment and technical data: - Automatic gluing machine with two rollers - Working width 1000 mm - Usable working thickness 0-100 mm - Application roller diameter 185 mm - Feed speed 24 m/min - Height of the working surface 800 mm - Roller groove spacing 2 mm - Motor power 0.37 kW - Glue distribution container made of painted sheet metal - Water tank made of galvanized sheet metal - CE marking - Voltage 400/50/3Ph Availability: short-term Ledpowkbb Djfx Aiishh Location: Röllbach

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Features and technical data: Uniform and consistent application across the entire working width due to an innovative technical solution and special vibration dampers, which compensate for potential deviations with uneven panels. Application ROLLS: with a special coating made of "acid-resistant synthetic rubber," allow for various adjustments, thereby ensuring a long service life. Homogeneous GLUE DOSING thanks to adjustable distribution trays. Accident-proof SAFETY DEVICES on all moving parts ensure maximum operator safety. ELECTRICAL SYSTEM: perfectly sealed and compliant with European standards, equipped with a push-button control panel, 24 V voltage. Technical data: Working width: 1300 mm Working height: 100 mm Application roller diameter: 185 mm Feed speed: 18 m/min Drive motor: 0.37 kW Working table height: 800 mm Dimensions: Length 780 mm, Width 2000 mm, Height 1350 mm Lodpoygn Ihsfx Aiiehh Weight: 340 kg Incl. stainless steel (INOX) water collection tank Location: Flörsheim Availability: Immediate

Condition: ready for operation (used), Siemens 1FT5071-0AF02-0 - Permanent Magnet Motor, Serial No.: E8H61677401002, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lodpfezfyr Iox Aiishh

Condition: ready for operation (used), Siemens 1FT5071-0AF02-0 - Permanent Magnet Motor, Serial No.: E8H61677411020, with 1FU1050-65BF 13.3 mVmin Tachometer - Z = K93 (housing IP67), used, in good condition, 100% functional, scope of delivery as shown in the photos. Lhjdszfyr Uopfx Aiioh

Condition: excellent (used), For sale: Gaussmeter MAGSYS HGM09s from the renowned manufacturer MAGNET SYSTEME (MAGSYS) – a professional magnetic field meter designed for industrial, service, and laboratory applications. This device is used for precise measurement of magnetic induction (mT / mG) and is widely used in quality control, maintenance, diagnostics of magnetic separators, magnetic grippers, permanent magnets, as well as laboratory applications. — Technical condition • Fully functional equipment, powers on correctly • Clear display, responds to magnetic field • Normal signs of use • No information on current calibration (user calibration may be required if necessary) — Included in the set • MAGSYS HGM09s gaussmeter • 2 MAGSYS magnetic probes • Complete cabling • USB memory stick • Original transport case • Exactly what you see in the photos — Main features • DC magnetic field measurement • Units: mT / mG • Functions: AUTO, HOLD, ZERO (NULL), manual/automatic ranges • Data logging and retrieval capabilities • Robust, industrial-grade construction • Suitable for B2B / laboratory applications — Lhsdpfx Aeydfvkeiijh Applications • Maintenance • Industry and manufacturing • Quality control • Magnetic separators and systems • Laboratories and technical services

Condition: good (used), electric magnetic plate, mounting plate, magnetic clamping plate, magnetic mounting plate, magnetic prism, magnetic prism, magnetic base -Magnetic prism: Magnetic measuring and clamping prism -Clamping surface: Length 120 mm Lhsdpfx Aox Sv Saeiieh -Prisms/Clamping surface: see photos -Magnet: can be switched on and off -Dimensions: 120/75/H105 mm -Weight: 4.5 kg

Condition: good (used), Crane magnet, lifting magnet, load lifting magnet, load lifting magnet, round magnet, scrap lifting magnet, scrap magnet -Magnetic lifter: Lifting magnet -Type designation: MC01 1027 RU 2.7 SO -Load capacity: t -Voltage: 220 V -Dimensions: Ø 280 x 230 mm -Weight: 43.8 kg Lodpfx Aiozd Sdaeijhh

Condition: new, 1FK7101-2AF71-1CH1, SIEMENS permanent magnet synchronous motor Lsdsvrf Urepfx Aiijhh Model: 1FK7101-2AF71-1CH1 Condition: New

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, NEW ++ NEW Streich-Hex NEW ++ NEW TOP Model: SH 1.6 Pneumatically operated spreading device lightweight and easy to operate for spreading chilled, unprocessed butter on baked goods NEW device - table-top model made of stainless steel includes: 1 nozzle, selectable width from 20 - 30 mm Optional: Delivery service Leasing & rental service - Butter container with attachments - Threaded adapter - Spreading nozzles 20/25/30/35/40/50 mm - Maintenance contract - Service package Instruction and commissioning Ledorkz Hnopfx Aiiohh More TOP bakery machines in stock!

Condition: refurbished (used), Manufacturer: Steinert Type: UMS 45 70 80/61 Lhedpfxowvaide Aiish 3,1 kW / 51 A. / 61 V. 100% ED Magnet L x W: 806 x 750mm. Conveyor Belt: 800mm. (new) AA.: Ca. 1.300mm. Weight: 1.550 KG With new transformer rectifier of 380V. Primary.

Condition: ready for operation (used), Siemens 1HU3078-0AC01-Z permanent magnet motor, serial number: ED087590701005, with 1HU1053 20mVmin tachometer and EBD 2M 24V-23W holding brake, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lhjdjzd I Emopfx Aiieh

Condition: used, This listing is for Maxwell 16 Promega Magnetic Particle Processor MX3031 The unit is in full working condition and ready for immediate use Automated magnetic particle processor designed for efficient, hands-free extraction of nucleic acids and proteins. Processes up to 16 samples simultaneously using pre-filled reagent cartridges to ensure consistent yields and high-purity results for downstream laboratory applications. [[1]()] Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Lsdpozgf Spjfx Aiishh Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: like new (used), functionality: fully functional, input voltage: 400 V, overall weight: 80 kg, input current: 11 A, Condition: Practically NEW – only used as a demonstration machine (see photos of the very clean interior) Suitable for 2 kg PUR containers (cartridges/blocks) Ideal for edge banding machines, profile wrapping, or other adhesive applications. MOD Technology (Melt-on-Demand): Only melts the required amount of adhesive – prevents PUR glue from burning. Compressed Air/Protective Gas: Operation requires dried compressed air or CO2 (important for PUR processing) Operation: Simple and robust membrane keypad Electrical Connection: 3LPE 400V 50/60Hz Rated Power (Pmax): 4200 W Ljdpjy D Hfzofx Aiiehh Maximum Current (Imax): 11 A Weight: approx. 80 kg (according to manufacturer) Protection Class: IP32 The unit is fully functional, exceptionally clean, and ready for immediate use. Location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus) Search terms / Suitable for equipment from: Homag, IMA, Biesse, Brandt, Holz-Her, SCM, Stefani, Hebrock, Felder, edge banding machine, edge bander, PUR adhesive, premelter, profile wrapping.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox Lhedpezf E Hqsfx Aiioh KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank Ljdpfxjzf E Dvj Aiijhh - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Year of construction: 2025, operating hours: 100 h, condition: used, functionality: fully functional, overall weight: 9,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0403, EDDY CENTRIC combines an iron and non-ferrous metal separator and offers an efficient and compact way to separate metals from a material stream at the highest throughput rates. A combination of a robust and powerful drum magnet separator for separating ferrous metals (nails, screws, etc.) and a centric eddy current separator for separating non-ferrous metals (aluminum, copper, brass, etc.) allows for the production of three marketable fractions in a single processing step. Ledpfxozfy R Do Aiijhh This module is part of our rental fleet.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) Lhedezff Riepfx Aiijh 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Year of construction: 2025, condition: new, Magnetic table, 60 kg/square meter, 18x18 milling pattern, for milling machines Lsdozd Rlvepfx Aiishh Magnetic clamping plate 200x300x80mm, 60 kg/square meter, 18x18 pattern: 470 EUR Magnetic clamping plate 200x400x80mm, 60 kg/square meter, 18x18 pattern: 660 EUR Magnetic clamping plate 300x400x80mm, 60 kg/square meter, 18x18 pattern: 800 EUR Magnetic clamping plate 300x600x80mm, 60 kg/square meter, 18x18 pattern: 1100 EUR Magnetic clamping plate 400x800x80mm, 60 kg/square meter, 18x18 pattern: 1880 EUR Magnetic clamping plate 400x1000x80mm, 60 kg/square meter, 18x18 pattern: 2300 EUR Magnetic clamping plate 500x1000x80mm, 60 kg/square meter, 18x18 pattern: 2800 EUR

Condition: new, Year of construction: 2021, weight / kg Ljdpfx Aiozcq N Teiohh

Year of construction: 2002, condition: used, width 395 mm length 2960 mm output height 130 mm efective widths 385 mm Pole center 400 mm Ledpfx Aed Srxzjiijhh drive motor Drehstrom

Condition: used, functionality: fully functional, Year of construction: 2011, Salt spreader: + Egholm + Compatible with CityRanger / Parkranger 2100 / 2150 Ljdszd Atxspfx Aiijhh + Stainless steel container + Disc spreader + Hydraulically driven + Cover + Year of manufacture: 2011 + Demountable frame Price per unit Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: new, Rexroth Indramat MDD071B-N-060-N2M-095GA0 permanent magnet motor, unused, 100% functional. Lhsdpei D Ndtofx Aiioh

Condition: ready for operation (used), Siemens 1FT5076-0AF01-2 permanent magnet motor, serial number: E1X10106315007, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Lhjdpfoi D S Dasx Aiieh

Condition: new, Siemens 1FT5103-0AF01-2, 3-phase permanent magnet motor, serial number as shown in the photo, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Lhodpfxsi D Taaj Aiioh