Used Low Noise Kompressor for sale (9,349)

Condition: new, maximum load weight: 58,860 kg, overall weight: 73,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Extract from the equipment; complete equipment list available upon request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Extendable loading platform: * Extendable loading platform with rear bevel approx. 500 mm x 8° * 8 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate Two-part steel ramps: * Pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber coating * Ramps with hydraulically folding ramp sections * Hydraulic lifting device, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm in transport position are not included in the overall vehicle length of 16,500 mm Axles: * BPW axles and suspension, 1st axle steering, 2nd and 3rd axles rigid, 4th and 5th axles trailing steering, air suspension with lift/lower function, drum brakes * Trailing steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Technical axle load: 12,000 kg each Hfsdpjy Augwsfx Agfsf Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data is transmitted to the tractor unit via the standardized EBS interface (ISO 11992). For correct readout, the tractor unit must be capable of transmitting and displaying these data. Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity approx. 24 t (tested to approx. 50 t) Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel structure made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations; 24 volt ASPÖCK-NORDIK lighting (ASS3) * All LED side marker lamps flash with the indicators * ASPÖCK-UNIBOX on the front connection rail with 24N, 24S, and 15-pin sockets as per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Entire steel structure automatically blasted after welding using a centrifugal blasting machine * Second blasting step with corundum grit for optimal coating adhesion * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final lacquer with 2 coats of 2-component topcoat, solid color RAL 3002 Carmine Red, compliant with the RAL 841GL system * Rear section metallized and painted RAL 9010 (Pure White) Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings mounted on the galvanized connection rail at the front * Bracket for beacon light at the rear of the trailer * Galvanized supports under the loading platform’s rear bevel * Super Grip 2 rubber coating

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our entire inventory of immediately and short-term available vehicles on our website. For a complete list of equipment, please enquire. SPECIFICATION: GOOSENECK: * Gooseneck in SNT design for improved platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° taper * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * On the gooseneck and rear taper: open grating with 5 mm steel reinforcement * 2-inch kingpin * Guide plate from gooseneck for the fifth wheel, approx. 500 mm wide * Round NATO connector on the front panel (Maeler & Kaege VG 96 917) * On the gooseneck: 1 pair of removable ALU side panels, approx. 400 mm high, anodized finish * 1 LED work light each, left and right, mounted at the top of the front wall, wired to the coupling panel for the tractor unit CARGO AREA: * Platform length approx. 9,600 mm, with rear slope approx. 900 mm x 6° * Hydraulic lift/lowering section after gooseneck, length approx. 3,000 mm, rated for up to approx. 9,000 kg * Continuous open grating on lift bed and platform with approx. 5 mm steel underlay for reinforced point loading TYRES: 235/75 R17.5, 3PMSF, twin tyres. Make at our discretion * TPMS tyre pressure monitoring system compliant with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steerable * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with starting aid * Technical axle load: 12,000 kg per axle * Air suspension with raise/lower valve HYDRAULIC LOADING RAMPS: * 1 pair of AXS steel ramps, two-part, open grating surface, length approx. 4,920 mm, width approx. 900 mm * Hydraulically folding ramp tips * Each ramp hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward * Strobe lights at ramp tips, switch positioned next to ramp controls * Ramp transport lock in driving position with quick-release * Painted non-slip coating on outer frame and ramp tip * Mechanical drop-leg side supports integrated in ramps, to assist with dock alignment * Ramp control valves on right side of vehicle BRAKE SYSTEM: WABCO EBS-E braking system, compliant with EU regulations SURFACE TREATMENT: * Entire chassis HRM metallized with ZINACOR 850 (85% zinc / 15% aluminium) for superior corrosion protection PAINTWORK: * Trailer body Carmine Red (RAL 3002) * Rims Silver Grey * Side walls Aluminium natural finish * Hub caps as per axle manufacturer * License plate holder Pure White (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. coupling panel for supply lines to tractor unit, mounted approx. 1,000 mm from the lower edge of the outer frame Hfsdpey Auhhsfx Agfof * Lashing chain anchor points inside left and right on front wall incl. aluminium trays below left and right for stowing chains or straps * Behind the front wall: approx. 12 mm thick DELIGNIT panel, bolted * Additional 2 pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling power, with remote control. Steel cable approx. 24 m long, 9.5 mm diameter, incl. cable pressure roller * Deflection pulley for the winch, with shackle and bolted lashing point

Condition: new, maximum load weight: 30,860 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available upon request. Chassis: * Steel welded construction with front neck, front corners chamfered and rear taper, drive-on ramp with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed retractable approx. 10 t lashing rings (2x on the raised platform, 1x in the front neck slope, 3x in the low bed between the wheel recesses, and 1x in the entry ramp) 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located in front after the neck with one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN/piece * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between the 3rd and 4th axle with one-piece drive-over aluminium cover, suitable for the transport of wheel loaders with wheelbase approx. 2,700 - 3,600 mm and wheel diameter approx. 1,485 - 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer longitudinal beams) Chassis attachments: * 5 pairs of stake pockets in the outer frame for box section posts approx. 100 x 50 x 5 mm (3x in the low bed and 2x on the raised platform) * Extensions with softwood planks approx. 50 mm, extendable on both sides of the low bed platform (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair front on the raised platform, inside the longitudinal beams, 1 pair fully at the rear in the excavator bucket recess left and right, 1 pair front on the raised platform before the neck, inside the longitudinal beams, 1 pair rear in the low bed before the drive-on slope, in the excavator bucket recess left and right Drawgear: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked design, with silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support equipment: * 2 hydraulic rear supports - operated individually, controls installed in separate stainless steel box underneath Hfodpjy Auhnsfx Agfof Axles: * SAF air-suspended low loader axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic slack adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, make Conti HTR2 (tyre load capacity approx. 12 t / axle) Brake system/Suspension: * Brake system per ECE directive R13, dual-line pneumatic brake system * Brake system make Wabco EBS system 4S3M, 1st + 3rd axles with sensors * RSS/RSP – stability program * Spring-actuated parking brake on 3rd + 4th axle * Aluminium air tanks for gross weight 44 t * Brake/air connection lines with 2 single coupling heads yellow/red * EBS/ABS connection cable * Tensioning rubber as holder for EBS and electrical plug * Air suspension with lift/lowering facility, operated separately front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/Safety systems: * SWIT - Schwarzmüller Intelligent Telematics Floor: * Softwood floor approx. 50 mm, impregnated, protruding approx. 5 - 10 mm above frame upper edge * Steel chequer plate cover over rear wheels

Condition: new, maximum load weight: 36,020 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our full vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Complete equipment details available on request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate above the axles Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating covering C40/5 (point load approx. 2.8 t on a surface of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections and hydraulic lifting system * Maximum load per pair: 30,000 kg Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock activated via reverse gear and manually * Air suspension with raise/lower valve Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations, LED lighting 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee optimum corrosion protection * Finishing coat: 2 layers 2K topcoat, solid colour RAL 3002 carmine red as per RAL system 841GL * Rear section metallised and painted RAL 9010 (pure white) * Rims in silver Included accessories: * One bracket for warning signs on the gooseneck and at the rear left and right, including socket * 1 spare wheel holder under the loading area, right in the direction of travel * 2" kingpin * One galvanized steel front wall * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with brackets on the bulkhead * 3 height wooden boards * Galvanized folding supports under the loading area bevel * Bracket for rotating beacon at rear of trailer * Height-adjustable tarpaulin structure – approx. 3,960 mm * Galvanized front wall with tensioning system for sliding curtains, height adjustable by approx. 400 mm Hsdpfxey Auhus Agfoff * EDSCHA roof, sliding forward on aluminum roof girder profiles (screwed to front and rear wall) * 3 pairs of sliding stakes in the loading area * The body is hydraulically extendable to the left and right at the rear by approx. 750 mm * Sliding roof with pivoting portal crossbeam * Sliding curtain with approx. 700 mm reserve length, ratchet straps at approx. 600 mm intervals. Height O

Condition: new, maximum load weight: 37,980 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete equipment details available on request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor covering approx. 30 mm thick Loading platform (extendable version): * Loading platform in extendable version with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings installed flat at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood floor covering approx. 48 mm thick, checker plate over the axles Landing legs: * JOST landing legs (mechanical) with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tires: * Tires 235/75 R 17.5 3PMSF – brand of our choice TPMS: * TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardized EBS interface in accordance with ISO 11992. For correct display, the towing vehicle must be able to receive and show this data. Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve * Axle tools Brake system: * Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Painting: * Entire steel structure is automatically shot blasted by blast wheel system after welding * Second blasting with corundum for optimal coating adhesion * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver-grey * Rear section metallized and painted in RAL 9010 (pure white) * Coating tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK lighting (ASS3) * All LED side marker lamps flash with the indicator * ASPÖCK-UNIBOX on the front junction strip with 24N, 24S & 15-pin sockets, connection as per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the headboard * Yellow-red air couplings on the galvanized front junction strip * 4 wheel chocks with holder at the headboard * Mounting at the rear of the gooseneck for ALU access ramps * Galvanized folding supports under the loading platform chamfer Hedpfey Aufmox Agfsff * Gooseneck and rear panel each with a bracket for warning signs including socket left and right * Axle load gauge including load diagram * On the gooseneck, plug-in aluminum side panels and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 3 pairs of WADER C

Condition: used, empty load weight: 8,600 kg, maximum load weight: 35,900 kg, overall weight: 44,500 kg, axle configuration: > 3 axles, first registration: 10/2006, suspension: air, color: green, Year of construction: 2006, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69977 Goldhofer, STN-L3-37/80A * Year of manufacture: 2006 * ABS, anti-lock braking system * Air suspension * Retractable lashing rings * Self-tracking steering axle * Air connection coupling head (red + yellow) * Spare wheel carrier with spare tire * 2x 7-pin connector * Lifting and lowering device * Extendable – telescopic semitrailer * Heavy-duty lashing points Hjdjyicanepfx Agfoff * Rear supports * Suspension: air * Gross vehicle weight: 44,500 kg * Unladen weight: 8,600 kg * Payload: 35,900 kg * Permissible GVW: 44,500 kg * Platform length: 9,000 mm * Rusty * Sale without valid roadworthiness certificate (TÜV) Liability disclaimer: Subject to change, prior sale, and errors excepted. Further photos and videos can be found on our website. Our extensive service includes, for example: * Purchase, sale, and rental of commercial vehicles * Quick, uncomplicated financing * Processing of all (export) documents * Arranging export or customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading and load securing * Roadworthiness inspections, registration service * Transport of commercial vehicles Contact our trained specialists— we will be happy to advise you.

Condition: used, mileage: 747,000 km, power: 330 kW (448.67 HP), first registration: 10/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Mercedes-Benz Actros 1845 X-Low 4x tractor unit * Automatic transmission * StreamSpace cab with 2 bunks * Air suspension * Roof and side spoilers * ACC Adaptive Cruise Control * Lane assist * Collision warning system * 2 tanks: 660L/330L * Automatic climate control * Auxiliary heater * Heated seats * Radio/CD/AUX * Electric windows * MOT until 01/27, maintenance certificate until 07/26 * 1st owner Hedpfey Arpiex Agfeff * 3 units available

Condition: used, Year of construction: 2003, operating hours: 2,695 h, Compair C38 compressor from 2003 with 2,695 operating hours! ----* Manufacturer: Compair * Model: C38 * Year of manufacture: 2003 * Recorded operating hours: approx. 2,695 * Working pressure: 7 bar * Deutz diesel engine * Power: 34 kW * Flow rate: 3.8 m3/min * Additional photos and video available on request (WhatsApp Erik) * Price: 2,900 EUR, net + 19% VAT Hfjdpfxoy Arips Agfjf ----For further questions, please call: Erik Kortum: WhatsApp All information provided without guarantee or warranty. Subject to errors and prior sale.

Condition: used, maximum load weight: 8,115 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 05/2019, next inspection (TÜV): 07/2026, total width: 2,550 mm, total height: 3,000 mm, Equipment: ABS, Steel rims, air brake, toolbox, SMB axles, wooden floor, used vehicle Hfjdpfx Aoy Aq Iwjgfjf Vehicle no. 3253, ABS, mechanically adjustable ramps (LxW: 2,350 x 550 mm), wooden loading floor, lashing eyes left and right, mechanical rear support, support leg front, storage box, height-adjustable towing drawbar, SMB axles with drum brakes, tires: 235/75 R17.5, cargo area dimensions (LxW): 5,000 x 2,050 mm, unladen weight: 2,385 kg, gross weight: 10,500 kg, errors and intermediate sale reserved.

Condition: used, maximum load weight: 24,420 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2016, next inspection (TÜV): 12/2026, loading space length: 9,300 mm, loading space width: 2,470 mm, loading space height: 3,070 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Wiese 3-Axle Step Frame Semi-Trailer SA-48-CS-S with 25t Hydraulic Ramp / Overwidth / Forklift Transporter For sale is a Wiese 3-axle step frame semi-trailer, model SA-48-CS-S, reinforced version, featuring a 25-ton hydraulic ramp, hydraulically extendable rear portal, and curtainsider body with roof loading capability. This trailer is ideally suited for transporting forklifts, heavy machinery, oversized loads, and versatile everyday transport tasks. Highlights: - Hydraulic ramp with 25,000 kg capacity (WFB 25 S) - Rear portal hydraulically extendable to approx. 3,600 mm - Lift axle + trailing steering axle - Curtainsider body with roof loading option - 40 mm phenolic resin-coated anti-slip floor, suitable for forklifts - Numerous lashing points, perforated outer frame, reinforced construction - Extension tarpaulin & oversize boards - Electro-hydraulic system with remote control Technical Data: Type: SA-48-CS-S - Gross weight: 48,000 kg - Fifth-wheel load: 18,000 kg - Axle group: 30,000 kg - Unladen weight: approx. 11,500 kg - Overall height: approx. 4,000 mm Internal dimensions: Raised section: approx. 4,150 mm Lower deck: approx. 9,300 mm Internal width: approx. 2,470 mm Internal height raised section: approx. 2,670 mm Internal height lower deck: approx. 3,070 mm Coupling height: approx. 1,150 mm Chassis & Body: - Reinforced steel welded frame - Outer frame as perforated frame - 16 pairs of flush-mounted lashing points - 4 pairs of additional 8t lashing rings in lower deck - Curtainsider body - Roof can be opened from front and rear - 4 rows aluminum slats + 2 rows wooden slats - Reinforced rear portal - 40 mm anti-slip phenolic resin-coated floor, suitable for forklift traffic Axles & Tyres: - 3 x 10,000 kg SAF-ECO drum-braked axles - Air suspension with raise/lower function - A axle: lift axle - C axle: trailing steering axle, friction-steered - Tyres: 245/75 R17.5 Brakes & Electrics: - Compressed air brake system, ABS (4S/3M WABCO) - EBS braking system - Spring brakes on 2 axles Hedjy Aqnwopfx Agfoff - 24V system, 2x 7-pin + 1x 15-pin connections - Europoint tail lights, side markers Hydraulic Ramp / Rear End Type WFB 25 S: - Load capacity: 25,000 kg - Length: approx. 3,100 mm - Galvanized heavy-duty grating - Usable as ramp and drive-through ramp - Hydraulic rear stabilizer - Emergency operation and remote control - Robust and low-maintenance Special Equipment: - Work lights on front wall - 3 large storage compartments inside - Oversize warning boards - Interior extension tarpaulins - Chain compartment in the floor - Plastic mudguards + splash flaps - Lateral underrun protection, aluminum anodized - 2 toolboxes Paintwork: - Chassis: RAL 5002 - Body: RAL 5002 - Tarpaulin: approx. RAL 5002 For further information, please feel free to contact us.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, loading space length: 17,320 mm, loading space width: 3,200 mm, loading space height: 400 mm, total length: 17,320 mm, total width: 3,200 mm, suspension: hydraulics, tire size: 245/70 R 17.5 | 143/131L (146/146F), color: beige, Year of construction: 2021, Colour: Yellow Loading capacity: 64,800 kg Main Features Manufacturer: Faymonville Model: GigaMax 1+4 / F-S45-2GXX Chassis number: YAFTL1009M0027562 Year of manufacture: 2021 Weights / Payload King-pin load: 25,000 kg Axle load: 12,000 kg Total axle load: 12,000 kg x 5 = 60,000 kg Gross vehicle weight (GVW): 84,200 kg Unladen weight: 20,200 kg Pay load: 64,800 kg Axles Pendle axles Hydraulic suspension All axles with hydraulic steering WABCO braking system with EBS-E Tyres: 245/70 R 17.5 | 143/131L (146/146F) Dimensions Overall length: 17,320 mm Loading platform length: 6,800 mm 2 extension beams: 2,000 mm / 3,000 mm Loading platform width: 2,750 mm / 3,200 mm Loading platform height: 400 mm Ground clearance: 150 mm King-pin height: +/- 1,340 mm Additional Equipment: Gooseneck with integrated 1-axle pendle axle Hatz Diesel power pack Hydraulically operated gooseneck Aluminium side boards on gooseneck 2 extension beams: 2,000 mm / 3,000 mm Excavator trough Lashing rings Stainless steel toolbox Spare wheel + holder Rear bumper with lights King-pin 3.5” Central greasing system with 2 BEKAMAX pumps = Further information = General Information Year of manufacture: 2021 Axle Configuration Tyre size: 245/70 R 17.5 | 143/131L (146/146F) Suspension: hydraulic suspension Front axle: Double wheels; lift axle; max. axle load: 12,000 kg; steered Rear axle 1: Double wheels; lift axle; max. axle load: 12,000 kg; steered Rear axle 2: Double wheels; lift axle; max. axle load: 12,000 kg; steered Rear axle 3: Double wheels; lift axle; max. axle load: 12,000 kg; steered Rear axle 4: Double wheels; lift axle; max. axle load: 12,000 kg; steered Weights Unladen weight: 20,200 kg Payload: 64,800 kg Gross vehicle weight: 85,000 kg Functional Loading platform height: 40 cm Extendable body: Yes Condition Hjdpfjvzaanjx Agfoff Technical condition: Very good Visual condition: Very good Financial information Price: On request Further information For more information, please contact Stefan Schaapveld.

Condition: excellent (used), mileage: 507,853 km, power: 427 kW (580.56 HP), first registration: 12/2018, brakes: retarder, color: white, gearing type: automatic, number of gears: 16, emission class: euro6, Year of construction: 2018, Equipment: AdBlue, retarder, = Additional options and accessories = - PTO (power take-off) = Further information = Hodpfx Aoy Ap Hlogfoff Number of cylinders: 8 Unladen weight: 10,200 kg Technical condition: very good Optical condition: very good

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Hfsdpfx Ajxt Dmxegfsf Optionally a vacuum cleaner unit can be offered later.

Year of construction: 2014, operating hours: 2,250 h, condition: used, New: No Power: 530 kW (721 HP) Hfjdpfjy Am U Hsx Agfsf VAT/margin: VAT qualifying

Condition: used, Year of construction: 2015, 2015 Kurtz AZ9.20 Low-Pressure Automated Die-Casting System with Balzer Low-Pressure Furnace and Holding Furnace Hsdpfx Ajy Amnyogfeff High-Specification Kurtz AZ79.20 Low-Pressure Die Casting Machine, Manufactured In 2015, Designed For Precision Aluminium Casting Applications. This Industrial-Grade Unit Features A Robust Hydraulic Closing System, Integrated Mould Cooling Circuits, And Automated Part Removal System, Making It Suitable For High-Reliability Production Environments. German-Built By Kurtz Gmbh, A Globally Recognised Manufacturer Of Die Casting Systems. The System Was Used To Manufacture 4-Cylinder Car Crankcases. By Simply Changing The Casting Molds, The System Can Be Quickly Converted To Produce Any Component Manufactured Using The Low-Pressure Casting Process. This Means It Can Produce Pump Housings, Oil Pans, Cylinder Heads, Cam Carriers, Transmission Housings, And Much More. Travel Movements (Section 2.4) Hydraulic Movements: Closing Unit (Upper Platen): Stroke: Max. 1,400mm. Maximum Opening: 2,400 Mm. Minimum Opening 600mm. Ejector Stroke 50mm. Part Removal: Stroke 1,365mm. Swivel: 180°. Drop Protection Ratio-Clamp RCS 100: Piston Rod Ø 100 Mm. Max Axial Load: 160 Kn. Max Unlocking Pressure: 160 Bar. Min Unlocking Pressure: 65 Bar. Hydraulic Cylinders. Closing Cylinder: 2 × Ø125/60 – 1,400 Mm Stroke. Ejector Cylinder: 4 × Ø100/63 – 50 Mm Stroke. Side Core Pull: 2 × Ø125/60 – 250 Mm Stroke. Front Core Pull: 2 × Ø160/80 – 270 Mm Stroke. Hydraulic Motors: Removal Lift/Swivel Motor: HSE 4.0.0 / SM4.80 – 180° (Manufacturer: Eckart) Pneumatic Movements: Removal Arm Lift: Max Stroke 400 Mm. Pneumatic Cylinder: DNC Ø63-400-PPV-A (Festo). Cooling System: 24 Water Cooling Circuits. 22 Air Cooling Circuits. Total Return Manifold Ø 88.9 Mm. Compressed Air Requirement: 6 Bar. Air Connection: ½". With A Movable And Height-Adjustable BALZER Pression Furnace And A BALZER Holding Furnace. S/No.FM1000063 (2015)

Condition: excellent (used), machine/vehicle number: XLRTEH4300G308428, mileage: 430,693 km, power: 355 kW (482.67 HP), first registration: 03/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 5,920 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2020, General information Number of doors: 2 Cab: SPACECAB Registration number: 51-BZS-5 Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Front axle: Max. axle load: 8000 kg; Steering Rear axle: Double wheels; Max. axle load: 11500 kg; Reduction: single reduction; Brakes: disc brakes Weights Empty weight: 7.696 kg Carrying capacity: 11.804 kg GVW: 19.500 kg Max. towing weight: 50.000 kg Interior Hsdpfx Agoyuitbsfeff Number of seats: 2 Maintenance, history and condition APK (MOT): tested until 01/2027 Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 04/1978, total length: 12,350 mm, total width: 2,500 mm, suspension: steel, tire size: 245/70R17.5, Year of construction: 1978, Van Hool Low Loader – 3 Axles – Ramps – Extendable Year of Manufacture: 12-4-1978 VIN: 3899 Registration: OX-84-88 APK/TUV: Extendable Steel suspension Loading ramps = Further information = Axle Configuration Tyre size: 245/70R17.5 Suspension: Leaf suspension Rear axle 1: Twin tires; Max. axle load: 8,000 kg Rear axle 2: Twin tires; Max. axle load: 8,000 kg Rear axle 3: Twin tires; Max. axle load: 8,000 kg Weights Unladen weight: 8,280 kg Payload: 30,720 kg Hsdpsyrrupofx Agfjff Gross vehicle weight: 39,000 kg Condition Technical condition: Good Visual condition: Good Identification Registration number: OX-84-88

Condition: new, axle configuration: 2 axles, Year of construction: 2023, Brian James General Plant (3,500kg), new vehicle without initial registration, tiltable loading area, ideal for scissor lifts and warehouse equipment, year of manufacture: 2023, loading area dimensions: 3.10m x 1.70m, permissible total weight: 3,500kg, payload: 2,790kg, perforated steel loading ramp, spare wheel, immediately available. Price: €6,590.00 net / €7,842.10 gross Hfedoyfra Sjpfx Agfjf Upon request, we can provide you with a leasing or financing offer. Mr. Ebert (Tel.) will be happy to assist you. Further information is available on our website. Subject to errors and prior sale! = Further information = Gross vehicle weight rating: 3,500 kg Contact Tobias Ebert for more information.

Condition: new, axle configuration: 2 axles, Equipment: ABS, Humbaur HBT 106224 BS Basic, tapered version Technical data: Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm External dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm Gross vehicle weight: 11,900 kg Payload: approx. 9,100 kg Wheelbase: 990 mm Tyres: 235/75 R17.5 inches Loading height: approx. 920 mm Drawbar length: approx. 1800 mm Coupling height: approx. 750-1000 mm Ramp angle: approx. 16° Plank length: approx. 2600 mm Plank width: approx. 540 mm 3 pairs of lashing rings, 3000 kg per lashing point; rings recessed in the platform floor 7 pairs of lashing rings, 1000 kg per lashing point; rings integrated in the external frame Standard equipment: Axles: Axles from renowned manufacturers Suspension: Low-maintenance parabolic suspension with load compensation Tyres: Manufacturer’s tyres of choice on steel rims Braking system: ABS braking system per ECE directive, with ALB function ABS plug connection ISO 7638 Spindle parking brake 2 interchangeable coupling heads (red/yellow) ISO 1728 Towing installation: Drawbar with DIN screw towing eye Ø 40 mm, galvanised, infinitely adjustable via crank Electrics: 24V lighting system with multifunction rear lights and LED side marker lights 15-pin connector for lighting Frame: Heavy-duty, welded and hot-dip galvanised frame Tapered rear end, 12° incline Floor: 40 mm softwood planks Side panels: Anodised aluminium side panels, laterally foldable and removable Corner stanchions, galvanised, insertable front and rear Ramps: 2 foldable steel ramps, one-piece, galvanised, laterally adjustable Ramp lifters: 1 gas strut per ramp Ramp lock at rear stanchion Ramp coating: galvanised grating Supports: Reinforced 12 t gearbox support winch with load and fast gear 2 telescopic folding supports at left and right rear of vehicle Features: Steel mudguards with antispray mats Side underrun protection up to the 1st axle, foldable 2 wheel chocks with holder Contour marking at side and rear Space for two-line licence plate on the left ramp A leasing or financing offer is available on request. Hjdpfx Ageyfvg Asfjff Mr. Seidel (Tel.) will be happy to assist you. Further information is available on our homepage. ... Subject to errors, changes, and prior sale!!! = Additional information = GVW: 11,900 kg External dimensions: 0 x 2550 x 3260 Please contact Tobias Ebert for further information.

Condition: used, maximum load weight: 55,850 kg, overall weight: 68,200 kg, axle configuration: 3 axles, first registration: 04/1999, total width: 2,550 mm, Nicolas Maxi 2C-4E low loader in top condition. 3+1 axle Steering axle Hedpsxz Ni Usfx Agfjff 60-70 tonnes Length: 13.80 metres Width: 2.55 metres Weight: 12,350 kg Gross weight: 68,200 kg Payload: 55,850 kg * 12.4.1999 * Sales consultant information * + * APPOINTMENT REQUIRED FOR TEST DRIVE OR INSPECTION * + * Trade-in and financing possible. * Input errors cannot be excluded. * Please check the equipment on site + Input errors and prior sale reserved

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, first registration: 02/2019, loading space length: 13,900 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R17.5, color: grey, Year of construction: 2019, Equipment: ABS, = Additional Options and Accessories = - Lift axle = Further Information = Axle configuration Tyre size: 245/70 R17.5 Hfodex Sy T Uspfx Agfsf Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 12,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 2: Max. axle load: 12,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 3: Max. axle load: 12,000 kg; Steering; Tyre tread left: 30%; Tyre tread right: 30% Weights Unladen weight: 9,500 kg Payload: 34,500 kg Gross vehicle weight: 44,000 kg Functional Body brand: OZSAN Extendable body: Yes Condition Technical condition: very good Visual condition: very good Damages: none Further information Please contact Luc Schoefs or Germain Daenen for more information.

Condition: excellent (used), machine/vehicle number: XLRTEH4300G225907, mileage: 573,255 km, power: 353 kW (479.95 HP), first registration: 10/2018, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of beds: 3, total length: 6,160 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, spoiler, = Additional options and accessories = - Air suspension - Aluminum fuel tank - Radio/CD player - Sper - Spoilers - Sun visor = More information = General information Cab: single Registration number: 52-BST-2 Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Max. front axle load: 8000 kg Hjdpfx Asy Af U Segfjff Max. rear axle load: 11500 kg Weights Empty weight: 8.044 kg Carrying capacity: 11.456 kg GVW: 19.500 kg Max. towing weight: 50.000 kg Interior Number of seats: 2 Maintenance, history and condition APK (MOT): tested until 03/2027 Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, empty load weight: 6,760 kg, maximum load weight: 23,240 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,100 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 8,100 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 14 x stake pockets in the outer frame, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, , incl. axle load indicators, , vehicle hot-dip galvanized, also with 9 m loading area length + widening in stock, , Surcharge for, aluminum ramps = price: 1.600 ¤, warning signs with lighting = price: 800 ¤ , , , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Hsdpfx Ageyy Uyxjfeff

Condition: new, empty load weight: 7,460 kg, maximum load weight: 22,540 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, with axle load indicator, loading platform length 9,200 mm, loaded height approx. 900 mm, 20 lashing rings each rated at 10 t, 16 stake pockets on the outer frame, drive-on ramps (approx. 3,000 x 750 mm), climbing bar on the outside of the ramps and rear slope, laterally adjustable drive-on ramps, spring-assisted lifting for one-piece ramps, 70 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, contour marking according to regulations, spring-loaded parking brake, chassis fully hot-dip galvanized, incl. axle load indicators, Surcharge for: warning signs with lighting and beacon = Price: 400 €, widening to 3 m = Price: 500 €, hydraulic one-piece ramps and hydraulic ramp adjustment = Price: 1,000 €, excavator shovel recess = Price: 1,000 €, Also available with 8.20 m loading platform length + widening in stock. -- Subject to typing errors, mistakes, and changes, sample images --, More data at: !, More Details: ! Hfodeyy Uxuepfx Agfsf

Condition: new, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ABS, air suspension with lifting and lowering functions, axle load scales, total load area length approx. 9,100 mm, low bed approx. 6,900 mm long, loaded platform height approx. 890 mm, 24 lashing rings each rated for 10 t, 12 stake pockets in the outer frame, climbing strips on the outer side of the ramps and rear slope, two-piece access ramps (approx. 4,300 x 750 mm), side-adjustable access ramps, 68 mm thick wooden flooring, storage box with lid for lashing chains or tension belts, contour markings as per regulations, rotating warning beacon, spring-loaded parking brake, incl. axle load indicators, vehicle hot-dip galvanized, surcharge for: hydraulic ramp adjustment = price: €1,000. Subject to errors, misprints, and changes. Sample images – more data at:! More details:! Hfsdpjyy Uyfefx Agfef