Used Lots Of Tools for sale (38,093)

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm Hedpfx Ajh Auahefisfn 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: used, total surface approx. 33,54 m² 6 plates 2,000 x 1,290 mm Hsdpfx Afjc S R H Noiefn width of T-slots 30 mm thickness of the plates 95 mm weight approx. 1,700 kg per plate - price per plate -

Condition: used, Clamping plate with T-slots made of cast steel/grey cast iron Base plate for radial drilling machine Assembly table, assembly station, base plate for column slewing crane Length 1850 mm Width 915 mm Hodpeh R D Uzefx Afisfn Plate thickness 230 mm Table surface with T-slots 1030 x 750 mm - Clamping surface with T-slots 22 mm, spacing = 250 mm - Top side milled parallel to the underside = clamping surface - Underside also milled, ribs rest flat and support - Ideal as a base plate Net weight 1140 kg good condition

Condition: used, Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Tombstone: with T-slots, heavy duty -Material: cast iron Hodpfx Afolbdlhoijfn -Groove width: 20 mm, groove distance 69 mm -Dimensions: 245/165/H130 mm -Weight: 15.1 kg

Condition: good (used), Work table with slots Inner table dimensions: 1600x650mm Total table dimensions: 1820x770mm Hsdevlxpispfx Afiefn Working height: 870mm Grip on the bottom for liquids or cutting fluids Approximate weight: 850kg *Table with slots from a milling machine

Year of construction: 2019, condition: as good as new (ex-display), SEALPAC tools. The first picture is a stock photo. Formtools fit model - SEALPAC A5 traysealer. Hfedpfx Aoiqi S Esfijn See pictures with dimensions of the formtools The price is for all formtools. Only selling them together.

Condition: used, dimensions 2,000 x 1,290 mm thickness of the plate 95 mm T - slots width 30 mm Hfedpfx Aon Staksfisn weight appro. 1,700 kg

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Hodsthuzpspfx Afisfn Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-grooved plate comes from: from a milling machine -Travel: approx. 1200 mm Hfodpsduiwwsfx Afijn -Width: 700 mm -Length: 2000 mm -Height: 510 mm -Plate thickness: mm -Table height: mm -Plate: is solid -Groove width: mm -Dimensions: 3030/850/H510 mm -Weight: approx. 1200 kg

Condition: used, dimensions 2,000 x 1,290 mm thickness of the plate 95 mm Hedpfx Aon Tvhbefisfn T - slots width 30 mm weight appro. 1,700 kg

Condition: used, Hydraulic Keyseating Machine FRÖMAG Type RA D 63/425 Serial No. AKK 10102 ASK 2191 Year of manufacture 1981 Max. keyway width: 63 mm Max. working stroke: 425 mm Table size: 460 x 680 mm Working height - table height: 1320 mm Keyway depth feed: 0.01 to 0.25 mm/stroke (feed per stroke) Bore diameter: 10 to 400 mm Cutting speed: 2 to 22 m/min Motor power (hydraulics): 4 kW Power supply: 380 Volt, 50 Hz - Feed control for the rack from 0.01 to 0.25 mm per stroke - Manual and automatic operation - Control with digital selector and digital display - Automatic feed with cut-off - Hydraulic working stroke with adjustable overload cut-off - Stroke preselection 1 to 9 Hfjdpfxsvvwxdo Afien - Centralised oil lubrication - Hydraulic cylinder equipped with new sealing elements (1/2025) - Operating manual, hydraulic diagram, and electrical schematic - The machine comes without tooling Weight: 1600 kg Space required L x W x H: 1100 x 800 x 1400 mm In good condition

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 1667 x 1000 mm, height 1400 mm Hsdpfxshtn Sfe Afisfn -Wall thickness: 45 mm -T grooves: groove width 18 mm -Dimensions: see photos -Dimensions: 1667/1000/H1400 mm -Weight: 1548 kg

Condition: used, dimensions 2,000 x 1,290 mm thickness of the plate 95 mm T - slots width 30 mm Hfjdpfx Afon Tvhmeion weight appro. 1,700 kg

Condition: used, Round clamping plate with T-slots Straightening plate and clamping table Diameter Ø 1500 mm Centering bore Ø 80 mm Hfodpfx Afjv Ed Svjisn Plate thickness 54 mm Working height 970 mm - 6 T-slots 18 mm - 3 threaded holes M20, pitch circle diameter 1000 mm - Steel base without central bore Weight 785 kg good condition

Condition: used, Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements -Clamping angle for: workpiece clamping -T groove: 14 mm -T groove spacing: 64 mm -Threaded holes: M12 -three-sided: can be clamped -Dimensions: 560/445/H145 mm -Weight: 170 kg/piece Hfedpfx Afjdwc Izeion

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,256 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table load: 250 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 710 mm Travel Y-axis: 400 mm Travel Z-axis: 350 mm Table dimensions: 850 x 400 mm Max. table load: 250 kg Table height from floor: 850 mm Spindle speed: 12,000 rpm Spindle taper: BBT 30 Main spindle power: 13 kW Rapid traverse (X, Y, Z): 60 m/min Max. tool diameter: 68 mm Max. tool length: 200 mm Max. tool weight: 3.0 kg Tool change time: 0.9 s Max. number of tool stations: 20 MACHINE DETAILS Control: FANUC 0i-MF Hfsdpfx Aexlf Nrefijn Dimensions (L x W x H): 2,100 x 2,600 x 2,700 mm Machine weight: 3,150 kg Operating hours Machining time: 2,256 h Run time: 3,557 h Control on: 24,690 h EQUIPMENT Automatic door Keyarrow chip conveyor

Year of construction: 2007, operating hours: 300 h, condition: ready for operation (used), functionality: fully functional, overall weight: 1,300 kg, machine/vehicle number: PSW-L, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Tool holder with only 300 operating hours! MACHINE DETAILS Electrical Data Voltage: 3 × 400 V Frequency: 50/60 Hz Rated Current: 1.8 A Power: 710 VA Pneumatics Compressed air supply: 5 bar / 200 l/min Weight: 1,300 kg Hfedpfx Afexliy Uoien Operating hours: 300 h EQUIPMENT 3 pallets Documentation

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axis: 100 m/min B / C axis: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axis: 10 m/s² B / C axis: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser output: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optics with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including safety backing Scrap conveyor 4× configurable control interface Valve terminal for 8 pneumatic clamps per side 2× load status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without probe) Measurement data processing 3× horizontal fixture interface Extraction ducting Protective enclosure for rotary changer including safety device, 1 window and column for control panel Status signal light (top & bottom) Video monitoring with camera Monitor mount Hfodjxlctzepfx Afijn Special installation Cooling unit KLH

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Hsdpfsxg Izasx Afijfn Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Hfodpfx Ajxlf D Nofisn Travels X-axis: 760 mm Y-axis: 530 mm Z-axis: 560 mm Speeds Rapid traverse: 40 m/min Spindle Speed: max. 12,000 rpm Power: max. 25 kW Tool magazine and table Tool magazine positions: 30 Table size (L × W): 900 × 500 mm EQUIPMENT Including chip conveyor Including slant bed filtration system Including zero-point clamping system Including 4th axis Rotamatik 120 New Däublin

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center height: 225 mm, controller model: Fanuc 16T, TECHNICAL DETAILS Hfodpfx Afexlix Djion Centre height: 225 mm MACHINE DETAILS Control: Fanuc 16T

Condition: ready for operation (used), Year of construction: 2022, operating hours: 674 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 235 mm, bar diameter (max.): 42 mm, TECHNICAL DETAILS MAIN SPINDLE Max. bar diameter: 42 mm Travel: 100 mm Spindle speed: 6,000 rpm Spindle drive power: 7.5/5.5 kW Minimum C-axis resolution: 0.001 degrees SUB SPINDLE Max. bar diameter: 34 mm Spindle speed: 5,000 rpm Spindle drive power: 5.5/3.7 kW Minimum C-axis resolution: 0.001 degrees Number of turrets: 2 UPPER TURRET Number of positions: 8 Travel X: 140 mm Travel Z: 235 mm Travel Y: 70 (+/-35) mm Driven tools speed: 5,000 rpm Driven tools power: 1.0 kW LOWER TURRET Number of positions: 6 Travel X/Z: 140 / 310 mm Number of spindles: 2 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,220 x 1,460 x 1,700 mm Machine weight: 3,100 kg ELECTRICAL SUPPLY Total connected load: 30 kVA Operating Hours Hodsxlfu Uopfx Afisfn Machining hours: 674 h Control on hours: 4,953 h

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 26BB2444, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Hfsdpfxsxliwys Afijn Electrical Data Connection: 380 V / 50 Hz Rated power: 10 kVA Fuse rating: 25 A Control voltage (AC): 220 VAC Control voltage (DC): 24 VDC EQUIPMENT Coolant tank

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: Traub TX8i-S, number of slots in tool magazine: 12, Equipment: chip conveyor, TECHNICAL DETAILS Bar capacity: 26 / 32 mm Max. main spindle speed: 8,000 rpm Axes: X1 / Y1 / Z1, C-axis integrated in the main spindle Turret: 1 Tool stations: 12 Drive power: 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) MACHINE DETAILS Power-on time: 116,721 h Operating hours: approx. 48,000 h Control: Traub TX8i-S DIMENSIONS & WEIGHT Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Machine weight: approx. 4,000 – 4,200 kg Hfjdpfjxlfk Nsx Afijn EQUIPMENT Chip conveyor: hinged belt, discharge height approx. 950 mm

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 135 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 16 mm, counter spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 16, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Machining Main spindle max. bar diameter: 16 mm Max. machining length without re-gripping: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. thread diameter: M6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. thread diameter: M3 Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm Main spindle C-axis indexing: 1° Rapid traverse Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tools Driven tool speed: 200–4,500 rpm Max. number of tool stations: 16 Tool holder: 10 × 10 mm Hsdpfexlffyjx Afisfn MACHINE DETAILS Drive capacity Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical connection Operating voltage: 200 V Frequency: 50 Hz Phases: 3 Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Pneumatic connection Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine data Dimensions: 1,590 × 837 × 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control Control type: CNC path control Fanuc 0i-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input modes: incremental and absolute Interface: RS232 Spindle synchronization: main and sub spindle EQUIPMENT Work area lighting Ejection and unloading device Coolant tank and central lubrication Door interlock Parts catcher and workpiece container 5 turning tool holders 10 × 10 mm Coolant system with movable jet arms Power clamping system for main and pick-off spindle