Used Long Bending Machine for sale (88,008)

Condition: new, - Ring bending machine - Shaft diameter 60 mm - The two lower rollers are hydraulically driven - Three rollers are driven Bdodsgg N Amepfx Ab Tek - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400 V

Condition: used, functionality: fully functional, Year of construction: 1997, Very nice hand-operated three-roll bending machine Manufacturer: Fasti Model: 103-20-1.25 Bdodpowu Euvefx Ab Tsk Working area: 2040 x 1.25mm According to the nameplate, year of manufacture: 1997 VERY LITTLE USED! The roll surfaces are completely smooth, even if the picture may make it look as though there are "grooves" on the left side. Location: Bremen _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The information and images were provided by the owner and approved for publication. The visual condition of the offered items corresponds to their age and the pictures shown. The technical condition and wear of the items offered are age-appropriate. Used machines are sold exclusively to commercial customers and without warranty.

Condition: good (used), Year of construction: 1990, machine/vehicle number: B 688, Offer 25399 Technical Data - Three driven rollers, lower rollers motorized and adjustable for pre-bending and cone rolling - Side arms or swing-out bearing supports - Hydraulic lifting and lowering of the upper roller - Operation from a separate control panel with digital actual value display - Max. working width: 3,100 mm - Max. sheet thickness at 240 N/mm²: 1.4 x roller diameter = 5 mm; 3.0 x roller diameter = 7 mm - Upper roller diameter: 220 mm Bedjxxirqopfx Ab Tsdk - Lower roller diameter (each): 190 mm - Extended roller ends for fitting profile rollers - Drive: 400 V / 5.5 kW - Working speed: approx. 5.6 m/min - Working speed with pre-bending: approx. 0.5 m/min - Required space: approx. W 5,200 x H 4,800 x D 2,200 mm - Weight: approx. 5,000 kg

Year of construction: 2018, condition: ready for operation (used), A hydraulic long folding machine/swivel bending machine Sperr & Lechner is available. Working width: 8000mm, max. sheet thickness steel/aluminium/stainless steel: 3mm/4mm/2mm, max. bending angle: 145°, throat depth: 1130mm, opening width: 180mm, back gauge: 1000mm. Machine dimensions X/Y/Z: approx. 10000mm/2100mm/2100mm, weight: approx. 7500kg. Documentation available. An inspection on site is possible. Bdsdpfoxxa Tlsx Ab Tek

Condition: excellent (used), functionality: fully functional, Gade Bending Machine 3100 X 25 Ton Mod. 30/25 Used Machine Bdodpfx Abewrrhwo Tok Internal Code: Svr 317

Condition: excellent (used), Working width 1010 mm Max. sheet thickness 370 N/mm² 1.5 mm Upper beam opening 80 mm Small bending width 10 x s mm Small Inner radius 1.5-2 x s mm Bending beam adjustment approx. 40 mm Max. bending angle 130° Dimensions L x W x H 1650 x 500 x 1400 mm Weight 380 kg Accessories / Special Features: • Upper tool, 45° bending rail • Flat rail on the bending beam • Graduation with stop • Compensating counterweight • Heavy-duty cast iron construction • Easy adjustment of the upper beam via spindle • Versatile • The bending tools are suitable for narrow and wide sheet metal for fine bending Bdsdpowg Ru Eofx Ab Tok • Angle adjustment with graduation • Easy bending thanks to counterweight Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2006, pipe diameter (max.): 35 mm, bending angle (max.): 150 °, total length: 3,000 mm, input voltage: 380 V, wall thickness: 3 mm, 2006 wafios BER35 Bdsdpfx Abovftpds Tjk

Condition: new, sheet width 2050 mm Bsdpfxoxaawgs Ab Tsdk plate thickness 4,5 mm max. plate thickness 4,0 mm anbiegen roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: used, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781/1L50 FR Serial-No. 1793 Heftdicke / Staple thickness 0-8mm Heftarmlänge / Staple Arm length 50cm Heftarmbreite vorn / Handle width at the front 10mm Bdjdpfoxvdmdjx Ab Tsk Klammerrückenlänge innen / Bracket Back Length Inside 12mm Heftdraht Runddraht Nr. 21 - 23 / Flachdraht II - IV Staple Wire Round Wire No. 21 - 23 / Flat Wire II - IV Heftgeschwindigkeit 250 Klammern pro min / Stapling Speed 250 staples/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1989, condition: ready for operation (used), An old folding machine Schröder is available. Working width: 2500mm, max. material thickness: 2.5mm, upper beam stroke: 80mm, adjustment: 160mm, speed: 120°/s, working height: 850mm, weight: approx. 3500kg. A visit on site is possible. Bjdjxxa U Nopfx Ab Todk

Condition: used, functionality: fully functional, BARIOLA PRESS BRAKE 3050 X 100 TON ESA CNC 4 AXES Bdodjxlr Uhopfx Ab Tsk MODEL PBI 100/30NCS DISTANCE BETWEEN FRAMES: 2600 mm STROKE: 150 mm WEIGHT: 7000 KG WITH CROWNING TABLE USED MACHINE INTERNAL CODE: SVR 360

Condition: new, roller (top) diameter: 46 mm, roller diameter: 46 mm, input voltage: 400 V, empty load weight: 225 kg, - Capacity 1050 x 0.8 mm Bedpfx Aor Iza Rsb Todk - Roll diameter 46 mm - Conical roller - Swivel top roller - Foot control - Emergency stop - Documentation - 400V

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 0100-0149-2024, overall weight: 700 kg, working length: 2,500 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 04.12.2025! Placing a bid obligates you to collect the machine promptly between 10.12.2025 and 12.12.2025! Bjdsxvbdtepfx Ab Tjdk The machine can be inspected on 25.11.2025! TECHNICAL DETAILS Working length: 2,500 mm MACHINE DETAILS Dimensions (L x W x H): 3,500 x 1,100 x 1,500 mm Total weight: 700 kg EQUIPMENT Suitable for flat material

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1032, warranty duration: 12 months, total width: 2,300 mm, total length: 1,685 mm, bending angle (max.): 90 °, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, nominal power (apparent): 4 kVA, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, type of input current: three-phase, -Complete machine frame processing Bdjdpjwfwkwjfx Ab Tek -Double-cylinder electro-hydraulic synchronous control -A variety of electro-hydraulic CNC systems are optional -Mechanical compensation -Segmented mold -High-precision back gauge structure -Scalable number of axes

Condition: good (used), ZOPF ZB 70/2 H – Ring Bending Machine / Profile Bending Machine Manufacturer: ZOPF GmbH Model: ZB 70/2 H Serial number: 5710276 Year of manufacture: 2005 Category: Ring Bending Machine / Profile Bending Machine Location: Germany Technical Specifications Power supply: 400 V / 50 Hz Motor power: 2.2 kW Current: 6.5 A Number of driven rolls: 2 Top roll adjustment: Hydraulic (H version) Roll speed: 8.5 rpm (max.) Speed control: rotational speed adjustable via potentiometer Mechanical Specifications Shaft diameter of rolls: approx. 40 mm Roll/bending roll diameter: approx. 152 / 162 mm Bsdpfxsxw Np Te Ab Tjdk Hydraulic pressure force: approx. 80 kN Adjustment travel of top roll: approx. 120 mm Working position: suitable for both horizontal and vertical operation Construction: welded steel frame, conical roller bearings, interchangeable slideways Bending Capacity (indicative) Round tube: up to approx. Ø 70 × 2 mm Solid round: approx. Ø 35 mm Angle profile: approx. 50 × 50 × 6 mm Dimensions and Weight Machine weight: approx. 470 kg Dimensions: 800 mm wide x 900 mm deep x 1200 mm high Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you verify all relevant details independently. Financial Information VAT/margin: VAT/margin: VAT: The price shown is excluding VAT (VAT deductible for businesses).

Condition: used, Technical details: Bdodpfx Absxu Dxqe Tek bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, number of rollers: 3, shaft diameter: 50 mm, roller diameter: 178 mm, bending radius (max.): 1,100 mm, bending radius (min.): 100 mm, bending force (max.): 17 t, rotational speed (min.): 9 rpm, pipe diameter (max.): 90 mm, tube wall thickness (max.): 4 mm, overall weight: 560 kg, total length: 1,200 mm, total width: 650 mm, total height: 1,300 mm, power: 3.5 kW (4.76 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, Very lightly used profile bending machine for sale due to business closure with a vast selection of accessories: Purchase date: December 2020, spiral bending device with EliKit/software: March 2022 Standard rollers and rollers for tubes and round material from Ø12 – Ø60.3 in steel and plastic (total 13 roller sets / 7x plastic / 6x 42CrMo4 nitrided) Bedsxw H A Djpfx Ab Tedk Accessory trolley Spiral bending device for pitch adjustment incl. software Shaft diameter: 50 mm Maximum capacity for steel pipes: 90 x 4 mm Maximum capacity for gas pipes: 3" (4 mm) Maximum capacity for square profiles: 60 x 60 x 10 mm Bending speed approx. 20% higher than machines in the same class Universal tool set included with every machine Shafts made of forged, treated, and ground chrome-nickel steel ensure high performance with minimal flexing The heavy and robust machine frame allows the bending of profiles with large cross-sections Reinforced frame guarantees significantly higher performance and minimizes vibrations Patented simultaneous lowering and rolling system reduces profile deformation Control via programmable touchpad with digital readout for the position of the central roll Storage for up to eight individual programs and unlimited feed steps Remote control with low voltage, with foot pedal switch Threaded spindles with micrometric adjustment ensure flawless and effortless tool positioning; spacer discs are not required Direct shaft guide system Side guides for angle profiles “leg inside” available upon request Standard accessories: Universal roll set for profiles (3 smooth rolls) Operator console with foot control Operating manual Technical Specifications Capacity: Round tube: 90 x 4 mm Square tube: 60 x 60 x 6 mm Round bar: 60 mm Flat bar: 80 x 20 mm Angle steel: 60 x 80 x 12 mm Machine data: Shaft diameter: 50 mm Standard roller diameter: 178 mm Adjustment travel: 142 mm Roller speed: 9 rpm Independently driven shafts: 3 smooth Connection voltage: 400 V Motor power: 1.85 kW Hydraulic unit motor: 2 kW Machine structure: electro-welded steel Piston pressure: 17.6 t Working position: horizontal / vertical Central roll adjustment: hydraulic Display: Digitally programmable Machine shoulder: Monoblock, cast iron Number of programs: 8 Foot pedal control: Yes Dimensions (WxHxD): 650 x 1300 x 1200 mm Weight: 450 kg

Condition: new, - Capacity 1270 x 2.5 mm - Electrically adjustable rear roller Bdsdpfx Aswfn E Eeb Tek - Digital display - Hardened rollers - Conical rolling option - Pivoting top roller - Brake motor - Foot pedal control - Emergency stop - Documentation - 400V

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, machine/vehicle number: 752588, grinding length: 2,000 mm, grinding width: 500 mm, overall weight: 12,000 kg, disc diameter: 700 mm, with magnetic clamping plate 2000x700mm due to insolvency Bodpfx Aoxlaa Eeb Todk

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (top) diameter: 180 mm, side roll diameter: 150 mm, working width: 1,550 mm, sheet thickness (max.): 9 mm, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT - Highly suitable for bending light and medium sheet metal, as well as aluminum or stainless steel materials - Ideal for rolling materials into round shapes and various diameters - Lower roll and side rolls operate via direct linear hydraulic up/down movement - Protected against overloading - Upper roll driven by electric motor and planetary gearbox. Lower roll driven via cardan coupling system. Two rolls feature powered rotation - Roll positions easily read via three digital indicators - Rolled part can be easily removed thanks to hydraulically opening head - Very easy operation with mobile control panel - Welded steel construction body - SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts - Cone bending device - Hydraulic balancing system for parallel movement of the rolls - Conforms to EU safety standards and CE marked - User manual Bdodpfoxw Eanox Ab Tsk OPTIONAL EQUIPMENT - Remote assistance via NC control - Upper crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Dual-speed adjustment system - Infinitely variable speed adjustment - Rotation powered by hydromotor - Extraction system TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 180 mm Side Roll: 150 mm Min. Bending Diameter: 270 / 900 mm Motor Power: 4 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 3350 mm Width: 1350 mm Height: 1290 mm Weight: 2900 kg

Condition: new, round material 30 x 1 mm square material 30 x 30 x 1 mm 16 mm 30 x 10 mm speeds 9 U/min Bdjdoh D Svnopfx Ab Tok total power requirement 1,1 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material 1x for? - footswitch

Condition: new, roller diameter: 90 mm, working width: 700 mm, sheet thickness steel (max.): 35 mm, - Capacity 700 x 3.5 mm - Electrically adjustable rear roller - Digital display Bdodpjr Ign Refx Ab Tek - Hardened rollers - 2 speeds - Conical roller - Swiveling top roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2025, number of rollers: 4, roller (top) diameter: 180 mm, side roll diameter: 150 mm, working width: 2,050 mm, sheet thickness (max.): 8 mm, STANDARD EQUIPMENT - Ideally suited for bending light to medium gauge steel, aluminum, or stainless materials - Perfect for bending round and various diameter materials - Lower roll and side rolls move up and down hydraulically with direct linear motion - Protected against overload - Top roll driven by electric motor and planetary gearbox; lower roll driven by cardan shaft coupling system; two rolls are power-driven - Roll positions can be easily read via three digital displays - Hydraulically opening head allows for easy removal of bent parts - Movable control panel ensures very easy operation - Welded steel construction frame - SAE 1050 (CK45) induction-hardened forged or rolled steel shafts - Conical bending system - Hydraulic balancing system for parallel movement of the rolls - Compliant with EU safety standards and CE certified - Operating manual included OPTIONAL EQUIPMENT - Remote assistance with NC control - Top crane (elevator) for supporting large diameter bending - Hydraulic side supports for assisting large diameter bending - Ground and polished rolls Bjdpfx Aboxw Eahj Tsdk - Dual speed adjustment system - Infinitely variable speed control - Rotation driven by hydraulic motor - Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 4/6 mm Bending: 6/8 mm Top & Lower Roll: 180 mm Side Roll: 150 mm Min. Bending Diameter: 270 / 900 mm Motor Power: 4 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 3850 mm Width: 1350 mm Height: 1290 mm Weight: 3300 kg

Condition: new, - Shank diameter 50 mm - Top roller is moved hydraulically - Digital display - Can be used horizontally/vertically - Foot control Bodpfxehyc Rxj Ab Tjdk - Emergency stop - Documentation - 400V

Condition: new, - Shaft diameter 40 mm - Can be used horizontally/vertically Bdodpfxslxw Rms Ab Tok - Foot control - Emergency stop - With 1 set of standard steel rollers - Documentation - 400V