Used Log Scanner for sale (28,847)

Condition: used, overall weight: 18,000 kg, maximum load weight: 14,225 kg, axle configuration: 2 axles, loading space length: 6,611 mm, loading space height: 4,000 mm, first registration: 01/2019, total width: 8,511 mm, total height: 2,550 mm, Equipment: ABS, DOLL - 2-axle short timber trailer in "stool design" type A2G-10L500 (A131) Technical data: Dimensions: Total trailer length: 8,511 mm (with drawbar length 1,900 mm) Loading length: 6,611 mm Front overhang: 760 mm Rear overhang: 856 mm Vehicle width: 2,550 mm Wheelbase: 4,995 mm Load height top edge of frame loaded: 1,187 mm (with 275/70 R 22.5 tires) Overall height: max. 4,000 mm Weights: Perm. total weight: 18,000 kg Axle load (2 x 9t): 18,000 kg (techn. 24,000 kg) Unladen weight approx.: 3,350 kg (without stools and stanchions) Payload approx.: 14,650 kg Basic equipment:A2G DOLL - 2-axle short timber trailer in "stool design" - straight top chord Sturdy welded construction consisting of 2 longitudinal beams with straight upper chord. - Bogie with ball bearing rim - 1 wheel chock with bracket - Side underrun protection in accordance with ECE?R 737254461 Rear underrun protection: Aluminum underride guard, in accordance with ECE?R 58 Complete lighting and license plate holder installed in a protected manner, in accordance with ECE?R 487227407 Wheel cover: Complete plastic mudguards over the wheels, attached to the bogie at the front and to the main frame at the rear, with DOLL mud flaps behind the axles. Frame cover: Full-length aluminum duet plate cover (3/5 mm) bolted between the upper chords.7206867 Drawbar GZY27: Drawbar fork with silent bushing bearings and drawbar support, type GZY 27drawbar eye: Length: D-value: Maximum front axle load: Maximum total weight:Ø 50 mm (heavy-duty ECE) 1,900 mm 125 kN 10 t 27 t Connecting cable to the truck: routed along the drawbar (air, light, ABS). Cable routing: Brake and electrical cables routed protected on the main frame. Grapple bracket: Angled grapple bracket at the front, reinforced. Mud flap: Continuous mud flap at the end of the vehicle, swinging, with ?DOLL? log Chassis / Chassis:12 t Chassis: 2 single axles, BPW, 12 t with drum brakes, both axles with ABS and AGS, including safety ropes. Suspension type SL, with 2 x 43 mm trailing arms. Air suspension: Air suspension without lifting and lowering. Weight display without Smartboard: EBS-E weight display for trailers with air suspension, consisting of 2 pressure sensors to determine the axle loads. The axle loads are transmitted to the truck via CAN-BUS for weight display in the truck display. (Truck equipment not included in the scope of delivery!) Brake system: Electronically controlled 2-line air brake system (EBS-E). Brand name, load-dependent, including ABS. EBS system completely installed, spring-loaded parking brake, can be operated via parking release safety valve, as well as from the cab (truck-side installation not included in scope of delivery!) Aluminum air tank Brake connection: 1 duomatic clutch head. Tires: Tires (85.50 kg / piece): 8 pieces tires 275/70 R 22.5 make Continental Hybrid HS3 on steel rim 8.25 x 22.5. Stools / stanchions: Stool: 6 pieces ECCO? steel stool body with 2° stanchion inclination type Kombi 7 (80.0 kg), with bracket ? Clamp fastening on the main frame including 1 pair of hooks for load securing. Stanchions: ECCO aluminum stanchions type ALU 7, screwable, fixed dimension stanchions. Basic height 2,550 mm (21.0 kg). Maximum loading capacity per pair of stanchions 7t. Kdedjw U Tv Hjpfx Afieu Electrical equipment / lighting: Lighting system: Conventional wiring of the trailer to increase the quality standard. ? Long service life ? Insensitive to moisture and dirt ? Minimal maintenance ? Quick and easy repair in rare serv

Condition: ready for operation (used), Plant for log processing and sorting, with 2D measuring system KESAT, chain saw and loader LogLift F 165 Z. Infeed Chain conveyors, around the chain saw roller conveyors, sorting chain conveyor. Hydraulicylly driven pushing and lenght stops. Approximate dimensions 20 x 70m. Mesick 92S log measurement frame Control and evaluation PC, Win11 operating system Data output in .csv format Manufacturer and supplier KESAT, a.s. Installation date 03/2024 Kjdpfow U Axwex Afiedu LOGLIFT F 165Z - all hydraulic cylinders are refurbished.

Condition: used, Year of construction: 2000, functionality: fully functional, Holtec sorting block train, type SBZ. Length 94.5 m. 52 boxes. Kedpfxjw Ug Ags Afiodu

Condition: used, mileage: 658,000 km, Year of construction: 2016, Serial number: YS2R6X4000211xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21081 Specifications: EU-approved until 20.07.2026 2016 model Km: approx. 658,000 Full air suspension Automatic Tires (see pictures) Euro 6 Alucar superstructure Length: 1,060 cm Width: 255 cm Wheelbase: 450/135 cm Curb weight: 15,120 kg Max payload: 14,805 kg 6x4 730 hp Toolbox Autoline sand spreaders Rotating light bar Tow hitch Ksdpfx Afow Nvfmjisdu Small damage at the lower front (visible in pictures) Bed Refrigerator Radio/CD Climate control/AC Description:2016 Scania R730 tandem timber truck with Alucar superstructure.Crane without cabin can be included at an additional cost.Recently EU-approved and ready for operation.Quick delivery possible. Km: 658000 HK: 730 Technical approved: Yes EU-approved until: 20.07.2026 Own weight: 15120 Total Weight: 30000 Payload: 14805 Width: 255 Length: 1060 Euro: 6 Model: R730 Gearbox: Automatic

Year of construction: 2018, condition: new, Exhibition machine Year of construction: 2018 with full warranty Equipment and technical data: Range of functions - Room geometry detection through laser measurements - Tachymeter function: standard measuring points can be extended by individual measuring points can be extended - Complex 360° panorama recording of each room scan - Image and measurement functions for every detail - Complete photo documentation - Display of preliminary panoramas via the HottScan app - Data transfer via USB stick or WiFi with the app Technical data at a glance Protractor features Measuring range: Horizontal 347°, vertical 180° Accuracy: 0.01°, relative Laser distance meter features Type: Coaxial, visible red laser Measuring range: 0.05-80 m Laser class: 2 Laser type: 650 nm; < lmW ø laser dot: (at distance) 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & lighting conditions Operation User interface: Control panel with soft-touch buttons and LED illumination/ display battery capacity/status display and error display Data exchange Flash memory 32 GB, USB and WLAN Range: 50 m (depending on environment) Power supply Power supply unit: 14.8 V, 1.2 A, with a final charging voltage of 16.8 V, Primary voltage is 100 V - 240 V, 19.5 VA, 50/60 Hz Battery: Operating range between 11.2 V and 16.8 V Running time: Up to 11.5 hours, depending on the use of the LED lighting; approx. 8 hours with typical use Environmental conditions Operating temperature: Operating and charging the batteries: +0° to +40° C Storage temperature: -20° to +50° C Dust and humidity: IP 40 Special features - Hot Swap:The rechargeable battery can be replaced within a few seconds during seconds during operation. - The integrated lighting provides support in poor lighting lighting conditions. - Mobility:The low weight (approx. 4.7 kg) in conjunction with the Ksdsw I Uizspfx Afiedu tripod makes the HottScan HS-1 a handy companion for site companion for site inspections in terms of maintenance and maintenance. Your advantages - Mobility (low weight) and long operating time - Avoidance of multiple inspections - Battery change within a few seconds - Free loaner in case of service from the 3rd working day Incl. HottScan room modeler full version Software for generating a 3D room from the images taken by the room scanner room scanner, export of mass mass data in CSV format, geometry export in DWG/DXF format with layer structure and Collada format Scope of services - Simple modeling of rooms from the first-person perspective - Export of mass data in CSV format - Geometry export: DWG/DXF format with layer structure and Collada format with textures format with textures; Continuous further processing in all 3D CAD programs Incl. transport case for HottScan 3D room scanner - Weather, corrosion and temperature resistant aluminum sheet - Cover and base profile butt-welded - 2 stainless steel hinges - 2 lever hinged latches - All-round rubber seal for dust and splash protection - splash water protection - Temperature resistance from -40°C to +80°C Interior fittings - Nubbed foam in the upper part - Foam insert in the lower part with product nests Availability: Short term Location: Hochheim

Condition: used, overall weight: 39,000 kg, maximum load weight: 33,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, loading space width: 2,550 mm, first registration: 02/2022, next inspection (TÜV): 02/2026, Year of construction: 2022, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3-axle platform for sawn and round wood - JANZEN System Werlte First registered 02/ 2022, from 1st hand Empty weight only 6,000 kg Loading length 13,550 mm, designed for fifth wheel height 1,200 mm Kdodpfxew I Ixpj Afiju Aluminum front wall reinforced version 12 stake pockets welded into the outer frame on each side, 2° incline, as a parking option directly behind the front wall 8 stake pockets across the direction of travel, in the middle in the longitudinal direction 8 stake pockets distributed over the entire length welded 16 pieces ECOO aluminum stakes type 9, load capacity per stake pair 9,000 kg, 8 rows of toothed strips between the stake pairs Chassis fine-grain steel S700, KTL coated and painted SAF axles reinforced off-road version, with large disc brakes, 430 mm 1st axle lift axle WABCO trailer EBS with anti-skid protection RSS WABCO smart board, with weight display axle loads Tires 6-fold 385/65 R 22.5, tread depth 90% Lighting full LED Crank seat post full load RENTING is the new BUYING, also available with us in full service rental IMMEDIATELY-----

Condition: refurbished (used), LBL Brenta chipper CT 700 Kdodoucp N Aspfx Afiou Max. Cutting depth = 150mm. Max. Cutting height = 650mm 9 blades Free center disc, overheating protection Clearance = 800mm Fast, precise positioning thanks to servo motor

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Log turner, infeed-outfeed conveyors, log correction hydraulic crane, heavy duty construction Equipment from 2019 Kodpfju N Ac Sex Afisdu

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, Roundwood orienter with lower cutter. After repair. Kedpfx Aewx I D Usfiodu

Condition: used, overall weight: 18,000 kg, maximum load weight: 15,030 kg, axle configuration: 2 axles, first registration: 03/2021, total width: 2,550 mm, total height: 1,210 mm, Equipment: ABS, For enquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). Pavic HTA 20 QSTE 690 Short Timber Trailer * Mileage: 230,265 km * Aluminium rims * Additional headlights on left, right, and rear of vehicle * Air suspension * Trailer coupling, 40 mm towing eye, Duomatic * SAF axles * Disc brakes * Wabco ABS * Spring brake actuators * Wabco smartboard * Permissible gross weight: 18,000 kg * Unladen weight: 2,970 kg * Payload: 15,030 kg * Tyre tread depth: 1st axle 12-14 mm, 2nd axle 8-14 mm We are happy to provide you with a leasing or financing offer upon request. Mr. Seidel (phone) will be happy to assist you. Further information can be found on our homepage. Kdedpow Sf Ehsfx Afiou !!! Errors, changes, and prior sale reserved !!!

Condition: used, Field of application: Mining Explore the superior processing capabilities of the Polygonmach Coarse Material Washer, a state-of-the-art solution designed to exceed expectations in processing sand and gravel. Polygonmach, a leading name in the industry, constantly pushes the boundaries of innovation to bring high-quality, reliable solutions to businesses. The Polygonmach Coarse Material Washer is a fundamental tool in the industry, specializing in the thorough cleaning, classification, and dewatering of coarser fractions. Designed to handle robust materials such as sand and gravel, it significantly enhances the quality of your output, leading to increased customer satisfaction and business growth. Built with high-capacity processing in mind, our Coarse Material Washer employs powerful scrubbing technology. This action facilitates the removal of impurities, thus unlocking the true value of your raw materials. The result is high-quality end products that meet rigorous industry standards. One of the key features of the Polygonmach Coarse Material Washer is its replaceable heavy-duty paddles. These are engineered to withstand the harsh environment, thereby increasing machine lifespan and reducing maintenance costs. The robust design is well-suited to large-scale operations, delivering high-volume processing efficiently. Moreover, it comes with an adjustable weir plate that offers control over the water volume and the fines. This flexibility empowers you to produce materials of desired specification and moisture content, guaranteeing consistent product quality. The Coarse Material Washer from Polygonmach is not only highly functional but also user-friendly. Ksdpfx Ajw Hzt Sefijdu

Condition: used, overall weight: 39,000 kg, empty load weight: 6,150 kg, maximum load weight: 32,850 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,330 mm, loading space height: 1 mm, first registration: 02/2022, suspension: air, color: black, tire size: 385/65R22.5, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, SAF axles, air suspension, first axle liftable, raise/lower function, ABS (Anti-lock Braking System), underrun protection, side aluminium underrun protection, landing gear, toolbox, stanchions. Body: 3-axle timber transport semi-trailer with 8 Ecco Steel stanchion cradles, LIKE NEW! 3x 9t SAF axles, disc brakes, first axle liftable, interchangeable 2" king pin, unladen saddle height approx. 1150mm, minimum free front clearance from the coupling center: 2240mm, lightweight chassis made from high-strength fine-grained steel. Loading height approx. 1540mm. Kdodpfx Afjw Ryuhjisu Prices: model year 2021 from EUR 25,900.00 net up to new from stock for EUR 29,900.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! - .

Condition: excellent (used), Exotic log band saw - Feeding cross conveyor with feeder - Brenta band saw carriage, type Bamat 1600 Kdjdpfx Aokzg Ihjfieu opening 1600 mm, 5 trestles, 3 log turners - circular cut-off saws, 2x 13 kW - Brenta band saw, type Irpad 1600 1600 x 240 mm, saw blade width 260 mm - take-off roller table - roller conveyor with cross haul-off - cross conveyor - roller table

Year of construction: 2017, condition: ready for operation (used), Includes measuring field S-075, calibration plate S, strip projection system LED (blue), 128 LP, lenses, 2x high-resolution 8. 0 MPixel digital camera with GigE interface, 3296x2472 pixels, lenses, filters, optoLINKII controller with USB interface, 10m cable, upgrade to integrated rack computer Intel® Xeon® processor, 64bit, 32GB RAM, 1TB SATA HDD, DVD +/-rw, graphics card, OPTOCAT measurement and evaluation software for Windows, laser pointer, flight case, closed system housing, M rotary/swivel unit with three-jaw chuck, certification for optical measurement system and system acceptance according to VDI / VDE 2634, the machine was hardly used. Kdedpfxol I Ewue Afieu

Condition: new, Year of construction: 2025, functionality: fully functional, Hydraulic log ladder, for log diameters from 7 cm to 66 cm. Kdsdpev N Eiqjfx Afiou

Condition: used, overall weight: 30,000 kg, maximum load weight: 24,200 kg, axle configuration: > 3 axles, first registration: 11/2011, Equipment: ABS, Manufacturer HFR Model 30 t. 4 axles Timber transport / Wood transport Year 2011 Condition Good Serial Number UH9PX301125HF1141 Kodpjw N Uuyefx Afiodu Ref. nr. 7949 Reg. date: 25-11-2011 Last seen: 10-12-2024 Disc brake: ? ABS: ? Rear axles: BPW Suspension: Air Tire Size: 265 / 70R19,5 Cover% left 100 - 100 - 80 - 100% Total weight: 30000 kg. Net weight: 5800 kg. Load capacity 24200 kg. Inside length: 7400 mm.

Condition: used, New: Yes Field of application: Mining Power: 110 kW (150 HP) Empty weight: 35.000 kg Dimensions (LxBxH): 700 x 240 x 240 cm Engine type: V-type Volume of the tank: 20 m^3 Productivity: 400 tph Log(Blade) Washer(With SKF AUTOMATIC LUBRICATION) Model : LW25 Machine Size : 2000 X 7000 X 2 (Double row) Drive System : 2 X 55 kW Feeding Size : 0 - 50mm Main Body : It is Manufactured ST37 A1 Quality 8mm Sheet as Twisted er Sheet to Which the Front Reducer Group is Connected Will be Manufactured From 12 mm Sheet Metal. Helice: Double Row Carrier Spiral Spoons ST 37 are Manufactured From 8 mm Sheet and the Arms Against Wear Will be Covered With Casting, Helices Will be Hardox Coated. Shaft : Made of Cr-Ni-Mo Alloy Steel. Kdjdpow Hzd Dofx Afisu Housing : GS52 Steel Casting Parts Used. Bearing : SKF or FAG Mark Heavy Duty Spherical Roller Bearings.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Hombak trunk milling machine ESR 900/700/960 Root inflow reducer Kdodpst Hf T Hofx Afieu - year of manufacture 1993 - log diameter max 1300 mm TECHNICAL PARAMETERS: minimum log length 2000 mm 48 knives main motor 45 kW hydraulic pump motor power 11 kW milling head rotation motor 5.5 kW shaft length (milling / cutting length) 980 mm pressures machine overall dimensions (length / width / height) 550 / 250 / 340 cm weight ~10 t

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger Kedoupiapepfx Afijdu - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Year of construction: 2014, condition: ready for operation (used), A compact Sirona laboratory scanner for the dental industry is available. Scanning method: 5-axis robotic arm, technology: digital stripe light projection with autofocus, accuracy: less than 12µm, machine dimensions X/Y/Z: approx. 480mm/740mm/460mm, weight: approx. 40kg. Accessories included. Documentation available. On-site inspection is possible. Kjdpfx Afjw Az Nljisdu

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2021, next inspection (TÜV): 05/2024, Equipment: ABS, -axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams Kdodpfxsn I Id Eo Afieu * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic mudguards, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: SK03UT6P0097 / SK01TMFY3097, type of input current: AC, input voltage: 230 V, The 3D laser scanner Trackscan Sharp49 offered here is a mobile, tracker-based 3D scanner, year of manufacture 2023, with a new price of €100,000. The exceptional feature of this device is its ability to digitalize components without the need to attach targets directly onto the part. This is made possible by targets integrated into the scanner housing, which are detected by the tracking unit. This measuring instrument is ideally suited for rapid digitalization of large components—spanning several meters—while maintaining comparatively high accuracy. The device was calibrated in an ISO 17025 accredited laboratory. The offer includes the scanning software. Optionally available: a touch probe for contact point measurement on objects and a laptop. Sample application areas include: - Digitalization of manufactured parts for subsequent metrological evaluation, such as first article inspections - Digitalization of objects/spare parts for downstream reverse engineering, for example, to manufacture replacement parts or implement design modifications Kdodpfxew Id E Eo Afiou - Digitalization of larger machinery and plant areas for planning and simulation purposes - Digitalization of vehicles for tuning applications Technical specifications: - 3 laser modes - Scan rate: up to 2,600,000 measurements per second - Volumetric accuracy: * At 10.4 m³: up to 0.049 mm * At 28.6 m³: up to 0.067 mm * At 49.0 m³: up to 0.089 mm - Recommended component size: 0.1 m – 12 m - Complete tracker case weight: 37 kg - Complete scanner case weight: 21 kg - Tracker unit weight: 6.8 kg - Scanner unit weight: 1.75 kg The device is fully operational and can be inspected under power.

Condition: used, overall weight: 39,000 kg, empty load weight: 6,000 kg, maximum load weight: 33,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,330 mm, loading space height: 1 mm, first registration: 02/2019, suspension: air, color: black, tire size: 385/65R22.5, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. 3 axles, SAF axles, air suspension, first axle liftable, raise/lower function, ABS (anti-lock braking system), underrun protection, lateral aluminium side guards, support legs, storage box, stanchions. Body: 3-axle timber transport trailer with 6 Ecco Steel stanchion sockets, 3x 9t SAF axles, disc brakes, first axle liftable, interchangeable 2" kingpin, unladen fifth wheel height approx. 1150mm, minimum free front distance from fifth wheel center approx. 2240mm, lightweight frame made of high-strength fine-grained steel. Loading height approx. 1540mm! Kedpfjwkvqajx Afijdu Multiple units in stock from insolvency! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, intermediate sale, and errors!

Condition: new, Quantity: 6 pieces Kodewb Ea Ejpfx Afiodu When buying 3 pieces, price: €2,000/piece

Condition: new, functionality: fully functional, Year of construction: 2024, color: red, overall weight: 100 kg, total height: 1,000 mm, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter Kdedpeuph Uxefx Afiju - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg